The following occurs during initialization of the AntSDR. I'm curious if the failed to create X is an issue. I've yet to establish a connection between the AntSDR and B205mini even after creating a direct connection between the two with appropriate cables and attenuators.
sudo LD_LIBRARY_PATH=./bin_app nice -20 ./bin_app/srsue/srsue ./bin_app/srsue/ue.conf --gw.netns=ue1
Reading configuration file ./bin_app/srsue/ue.conf...
Built in Release mode using commit 254cc719a on branch HEAD.
Opening 1 channels in RF device=iio with args=n_prb=6,context=ip:192.168.1.10
Active RF plugins: libsrsran_rf_iio.so
Inactive RF plugins:
Supported RF device list: iio
CH0 n_prb=6
CH0 context=ip:192.168.1.10
failed to create the rf_port with A_BALENCED
failed to create the rf_port with A
Waiting PHY to initialize ... done!
Attaching UE...
Setting manual TX/RX offset to 82 samples
I make it down to 5/5 attempts instead.
Found Cell: Mode=FDD, PCI=1, PRB=6, Ports=1, CP=Normal, CFO=3.7 KHz
Setting manual TX/RX offset to 82 samples
Found PLMN: Id=00101, TAC=7
Random Access Transmission: seq=19, tti=2261, ra-rnti=0x2
Random Access Transmission: seq=4, tti=2281, ra-rnti=0x2
Random Access Transmission: seq=47, tti=2301, ra-rnti=0x2
Random Access Transmission: seq=37, tti=2321, ra-rnti=0x2
Random Access Transmission: seq=51, tti=2341, ra-rnti=0x2
Random Access Transmission: seq=42, tti=2361, ra-rnti=0x2
Random Access Transmission: seq=9, tti=2381, ra-rnti=0x2
Random Access Transmission: seq=20, tti=2401, ra-rnti=0x2
Random Access Transmission: seq=10, tti=2421, ra-rnti=0x2
Random Access Transmission: seq=36, tti=2441, ra-rnti=0x2
Attach failed (attempt 5/5)