Utilities for Amazon Elastic File System (EFS)

The efs-utils package has been verified against the following Linux distributions:

The efs-utils package has been verified against the following MacOS distributions:

• Prerequisites
• Optional
• Installation
  • On Amazon Linux distributions
  • Install via AWS Systems Manager Distributor
  • On other Linux distributions
  • On MacOS Big Sur, macOS Monterey and macOS Ventura distribution
    • Run tests
• Usage
  • mount.efs
  • MacOS
  • amazon-efs-mount-watchdog
• Troubleshooting
• Upgrading stunnel for RHEL/CentOS
• Upgrading stunnel for SLES12
• Upgrading stunnel for MacOS
• Install botocore
  • RPM
  • DEB
  • On Debian10 and Ubuntu20, the botocore needs to be installed in specific target folder
  • To install botocore on MacOS
• Upgrade botocore
• Enable mount success/failure notification via CloudWatch log
  • Step 1. Install botocore
  • Step 2. Enable CloudWatch log feature in efs-utils config file /etc/amazon/efs/efs-utils.conf
  • Step 3. Attach the CloudWatch logs policy to the IAM role attached to instance.
• Optimize readahead max window size on Linux 5.4+
• Using botocore to retrieve mount target ip address when dns name cannot be resolved
  • Step 1. Install botocore
  • Step 2. Allow DescribeMountTargets and DescribeAvailabilityZones action in the IAM policy
• The way to access instance metadata
• Use the assumed profile credentials for IAM
• Enabling FIPS Mode
• Disabling Version Check
• License Summary

• nfs-utils (RHEL/CentOS/Amazon Linux/Fedora) or nfs-common (Debian/Ubuntu)
• OpenSSL 1.0.2+
• Python 3.4+
• stunnel 4.56+

• botocore 1.12.0+

For those using Amazon Linux or Amazon Linux 2, the easiest way to install efs-utils is from Amazon's repositories:

$ sudo yum -y install amazon-efs-utils

You can now use AWS Systems Manage Distributor to automatically install or update amazon-efs-utils. Please refer to Using AWS Systems Manager to automatically install or update Amazon EFS clients for more guidance.

The following are prerequisites for using AWS Systems Manager Distributor to install or update amazon-efs-utils:

1. AWS Systems Manager agent is installed on the distribution (For Amazon Linux and Ubuntu, AWS Systems Manager agent is pre-installed, for other distributions, please refer to install AWS Systems Manager agent on Linux EC2 instance for more guidance.)

2. Instance is attached with IAM role with AWS managed policy AmazonElasticFileSystemsUtils, this policy will enable your instance to be managed by AWS Systems Manager agent, also it contains permissions to support specific features.

Other distributions require building the package from source and installing it.

• To build and install an RPM:

If the distribution is not OpenSUSE or SLES

$ sudo yum -y install git rpm-build make
$ git clone https://github.com/aws/efs-utils
$ cd efs-utils
$ make rpm
$ sudo yum -y install build/amazon-efs-utils*rpm

Otherwise

$ sudo zypper refresh
$ sudo zypper install -y git rpm-build make
$ git clone https://github.com/aws/efs-utils
$ cd efs-utils
$ make rpm
$ sudo zypper --no-gpg-checks install -y build/amazon-efs-utils*rpm

On OpenSUSE, if you see error like File './suse/noarch/bash-completion-2.11-2.1.noarch.rpm' not found on medium 'http://download.opensuse.org/tumbleweed/repo/oss/' during installation of git, run the following commands to re-add repo OSS and NON-OSS, then run the install script above again.

sudo zypper ar -f -n OSS http://download.opensuse.org/tumbleweed/repo/oss/ OSS
sudo zypper ar -f -n NON-OSS http://download.opensuse.org/tumbleweed/repo/non-oss/ NON-OSS
sudo zypper refresh

• To build and install a Debian package:

$ sudo apt-get update
$ sudo apt-get -y install git binutils
$ git clone https://github.com/aws/efs-utils
$ cd efs-utils
$ ./build-deb.sh
$ sudo apt-get -y install ./build/amazon-efs-utils*deb

For EC2 Mac instances running macOS Big Sur, macOS Monterey and macOS Ventura, you can install amazon-efs-utils from the homebrew-aws respository. Note that this will ONLY work on EC2 instances running macOS Big Sur, macOS Monterey and macOS Ventura, not local Mac computers.

brew install amazon-efs-utils

This will install amazon-efs-utils on your EC2 Mac Instance running macOS Big Sur, macOS Monterey and macOS Ventura in the directory /usr/local/Cellar/amazon-efs-utils.

Follow the instructions in caveats when using efs-utils on EC2 Mac instance for the first time. To check the package caveats run below command

brew info amazon-efs-utils

• Set up a virtualenv for efs-utils

$ virtualenv ~/.envs/efs-utils
$ source ~/.envs/efs-utils/bin/activate
$ pip install -r requirements.txt

• Run tests

$ make test

efs-utils includes a mount helper utility to simplify mounting and using EFS file systems.

To mount with the recommended default options, simply run:

$ sudo mount -t efs file-system-id efs-mount-point/

To mount file system to a specific mount target of the file system, run:

$ sudo mount -t efs -o mounttargetip=mount-target-ip-address file-system-id efs-mount-point/

To mount file system within a given network namespace, run:

$ sudo mount -t efs -o netns=netns-path file-system-id efs-mount-point/

To mount file system to the mount target in specific availability zone (e.g. us-east-1a), run:

$ sudo mount -t efs -o az=az-name file-system-id efs-mount-point/

To mount over TLS, simply add the tls option:

$ sudo mount -t efs -o tls file-system-id efs-mount-point/

To authenticate with EFS using the system’s IAM identity, add the iam option. This option requires the tls option.

$ sudo mount -t efs -o tls,iam file-system-id efs-mount-point/

To mount using an access point, use the accesspoint= option. This option requires the tls option. The access point must be in the "available" state before it can be used to mount EFS.

$ sudo mount -t efs -o tls,accesspoint=access-point-id file-system-id efs-mount-point/

To mount your file system automatically with any of the options above, you can add entries to /efs/fstab like:

file-system-id efs-mount-point efs _netdev,tls,iam,accesspoint=access-point-id 0 0

For more information on mounting with the mount helper, see the manual page:

man mount.efs

or refer to the documentation.

For EC2 instances using Mac distribution, the recommended default options will perform a tls mount:

$ sudo mount -t efs file-system-id efs-mount-point/

or

$ sudo mount -t efs -o tls file-system-id efs-mount-point/

To mount without TLS, simply add the notls option:

$ sudo mount -t efs -o notls file-system-id efs-mount-point/

efs-utils contains a watchdog process to monitor the health of TLS mounts. This process is managed by either upstart or systemd depending on your Linux distribution and launchd on Mac distribution, and is started automatically the first time an EFS file system is mounted over TLS.

If you run into a problem with efs-utils, please open an issue in this repository. We can more easily assist you if relevant logs are provided. You can find the log file at /var/log/amazon/efs/mount.log.

Often times, enabling debug level logging can help us find problems more easily. To do this, run
sed -i '/logging_level = INFO/s//logging_level = DEBUG/g' /etc/amazon/efs/efs-utils.conf.

You can also enable stunnel debug logs with
sed -i '/stunnel_debug_enabled = false/s//stunnel_debug_enabled = true/g' /etc/amazon/efs/efs-utils.conf.

Make sure to perform the failed mount again after running the prior commands before pulling the logs.

By default, when using the EFS mount helper with TLS, it enforces certificate hostname checking. The EFS mount helper uses the stunnel program for its TLS functionality. Please note that some versions of Linux do not include a version of stunnel that supports TLS features by default. When using such a Linux version, mounting an EFS file system using TLS will fail.

Once you’ve installed the amazon-efs-utils package, to upgrade your system’s version of stunnel, see Upgrading Stunnel.

Run the following commands and follow the output hint of zypper package manager to upgrade the stunnel on your SLES12 instance

sudo zypper addrepo https://download.opensuse.org/repositories/security:Stunnel/SLE_12_SP5/security:Stunnel.repo
sudo zypper refresh
sudo zypper install -y stunnel

The installation installs latest stunnel available in brew repository. You can also upgrade the version of stunnel on your instance using the command below:

brew upgrade stunnel

efs-utils uses botocore to interact with other AWS services. Please note the package type from the above table and install botocore based on that info. If botocore is already installed and does not meet the minimum required version, you can upgrade the botocore by following the upgrade botocore section.

• Download the get-pip.py script

sudo yum -y install wget

if [[ "$(python3 -V 2>&1)" =~ ^(Python 3.6.*) ]]; then
    sudo wget https://bootstrap.pypa.io/pip/3.6/get-pip.py -O /tmp/get-pip.py
elif [[ "$(python3 -V 2>&1)" =~ ^(Python 3.5.*) ]]; then
    sudo wget https://bootstrap.pypa.io/pip/3.5/get-pip.py -O /tmp/get-pip.py
elif [[ "$(python3 -V 2>&1)" =~ ^(Python 3.4.*) ]]; then
    sudo wget https://bootstrap.pypa.io/pip/3.4/get-pip.py -O /tmp/get-pip.py
else
    sudo wget https://bootstrap.pypa.io/get-pip.py -O /tmp/get-pip.py
fi

sudo apt-get update
sudo apt-get -y install wget

if echo $(python3 -V 2>&1) | grep -e "Python 3.6"; then
    sudo wget https://bootstrap.pypa.io/pip/3.6/get-pip.py -O /tmp/get-pip.py
elif echo $(python3 -V 2>&1) | grep -e "Python 3.5"; then
    sudo wget https://bootstrap.pypa.io/pip/3.5/get-pip.py -O /tmp/get-pip.py
elif echo $(python3 -V 2>&1) | grep -e "Python 3.4"; then
    sudo wget https://bootstrap.pypa.io/pip/3.4/get-pip.py -O /tmp/get-pip.py
else
    sudo apt-get -y install python3-distutils
    sudo wget https://bootstrap.pypa.io/get-pip.py -O /tmp/get-pip.py
fi

• To install botocore on RPM

sudo python3 /tmp/get-pip.py
sudo pip3 install botocore || sudo /usr/local/bin/pip3 install botocore

• To install botocore on DEB

sudo python3 /tmp/get-pip.py
sudo pip3 install botocore || sudo /usr/local/bin/pip3 install botocore

sudo python3 /tmp/get-pip.py
sudo pip3 install --target /usr/lib/python3/dist-packages botocore || sudo /usr/local/bin/pip3 install --target /usr/lib/python3/dist-packages botocore

sudo pip3 install botocore

Pass --upgrade to the corresponding installation scripts above based on system platform and distribution

sudo pip3 install botocore --upgrade

efs-utils now support publishing mount success/failure logs to CloudWatch log. By default, this feature is disabled. There are three steps you must follow to enable and use this feature:

Follow install botocore section

sudo sed -i -e '/\[cloudwatch-log\]/{N;s/# enabled = true/enabled = true/}' /etc/amazon/efs/efs-utils.conf

• For MacOS:

    EFS_UTILS_VERSION=<e.g. 1.34.5>
    sudo sed -i -e '/\[cloudwatch-log\]/{N;s/# enabled = true/enabled = true/;}' /usr/local/Cellar/amazon-efs-utils/${EFS_UTILS_VERSION}/libexec/etc/amazon/efs/efs-utils.conf

• For Mac2 instance:

    EFS_UTILS_VERSION=<e.g. 1.34.5>
    sudo sed -i -e '/\[cloudwatch-log\]/{N;s/# enabled = true/enabled = true/;}' /opt/homebrew/Cellar/amazon-efs-utils/${EFS_UTILS_VERSION}/libexec/etc/amazon/efs/efs-utils.conf

You can also configure CloudWatch log group name and log retention days in the config file. If you want to have separate log groups in Cloudwatch for every mounted file system, add /{fs_id} to the end of the log_group_name field in efs-utils.conf file. For example, the log_group_name in efs-utils.conf file would look something like:

[cloudwatch-log]
log_group_name = /aws/efs/utils/{fs_id}

Attach AWS managed policy AmazonElasticFileSystemsUtils to the iam role you attached to the instance, or the aws credentials configured on your instance.

After completing the three prerequisite steps, you will be able to see mount status notifications in CloudWatch Logs.

A change in the Linux kernel 5.4+ results a throughput regression on NFS client. With patch, starting from 5.4.*, Kernels containing this patch now set the default read_ahead_kb size to 128 KB instead of the previous 15 MB. This read_ahead_kb is used by the Linux kernel to optimize performance on NFS read requests by defining the maximum amount of data an NFS client can pre-fetch in a read call. With the reduced value, an NFS client has to make more read calls to the file system, resulting in reduced performance.

To avoid above throughput regression, efs-utils will modify read_ahead_kb to 15 * rsize (could be configured via mount option, 1MB by default) after mount success on Linux 5.4+. (not support on MacOS)

This optimization will be enabled by default. To disable this optimization:

sed -i "s/optimize_readahead = false/optimize_readahead = true/" /etc/amazon/efs/efs-utils.conf

To re-enable this optimization

sed -i "s/optimize_readahead = true/optimize_readahead = false/" /etc/amazon/efs/efs-utils.conf

You can mount file system with a given rsize, run:

$ sudo mount -t efs -o rsize=rsize-value-in-bytes file-system-id efs-mount-point/

You can also manually chose a value of read_ahead_kb to optimize read throughput on Linux 5.4+ after mount.

$ sudo bash -c "echo read-ahead-value-in-kb > /sys/class/bdi/0:$(stat -c '%d' efs-mount-point)/read_ahead_kb"

efs-utils now supports using botocore to retrieve mount target ip address when dns name cannot be resolved, e.g. when user is mounting a file system in another VPC. There are two prerequisites to use this feature:

Follow install botocore section

Allow the elasticfilesystem:DescribeMountTargets and ec2:DescribeAvailabilityZones action in your policy attached to the iam role you attached to the instance, or the aws credentials configured on your instance. We recommend you attach AWS managed policy AmazonElasticFileSystemsUtils.

This feature will be enabled by default. To disable this feature:

sed -i "s/fall_back_to_mount_target_ip_address_enabled = true/fall_back_to_mount_target_ip_address_enabled = false/" /etc/amazon/efs/efs-utils.conf

If you decide that you do not want to use this feature, but need to mount a cross-VPC file system, you can use the mounttargetip option to do so, using the desired mount target ip address in the mount command.

efs-utils by default uses IMDSv2, which is a session-oriented method used to access instance metadata. If you don't want to use IMDSv2, you can disable the token fetching feature by running the following command:

sed -i "s/disable_fetch_ec2_metadata_token = false/disable_fetch_ec2_metadata_token = true/" /etc/amazon/efs/efs-utils.conf

To authenticate with EFS using the system’s IAM identity of an awsprofile, add the iam option and pass the profile name to awsprofile option. These options require the tls option.

$ sudo mount -t efs -o tls,iam,awsprofile=test-profile file-system-id efs-mount-point/

To configure the named profile, see the Named Profiles doc and Support Config File Settings doc for more details. If the credentials (e.g. aws_access_key_id) are not configured in /root/.aws/credentials or /root/.aws/config (note that the path prefix may vary based on the root path of sudo), efs-utils will use botocore to assume the named profile. This will require botocore is pre-installed, please follow install botocore section to install botocore first.

Normally you will need to configure your profile IAM policy to make the assume works. For example, if you want to perform a cross-account mounting, suppose you have established vpc-peering-connections between your vpcs, next step you need to do is giving permission to account B so that it can assume a role in account A and then mount the file system that belongs to account A. You can see IAM doc for more details.

After the IAM identity is setup, you can configure your awsprofile credentials or config. You can refer to sdk settings. For example you can define the profile to use the credentials of profile default to assume role in account A by defining the source_profile.

# /root/.aws/credentials
[default]
aws_access_key_id = AKIAIOSFODNN7EXAMPLE
aws_secret_access_key_id =wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY

# /root/.aws/config
[default]
...

[profile test-profile]
role_arn = <role-arn-in-account-A>
source_profile = default

Or you can use the credentials from IAM role attached to instance to assume the named profile, e.g.

# /root/.aws/config
[profile test-profile]
role_arn = <role-arn-in-account-A>
credential_source = Ec2InstanceMetadata

You can use web identity to assume a role which has the permission to attach to the EFS filesystem. You need to have a valid JWT token and a role arn to assume. There are two ways you can leverage them:

1. By setting environment variable the path to the file containing the JWT token in AWS_WEB_IDENTITY_TOKEN_FILE and by setting ROLE_ARN environment variable. The command below shows an example of to leverage it.

$ sudo mount -t efs -o tls,iam file-system-id efs-mount-point/

2. By passing the JWT token file path and the role arn as parameters to the mount command. The command below shows an example of to leverage it.

$ sudo mount -t efs -o tls,iam,rolearn="ROLE_ARN",jwtpath="PATH/JWT_TOKEN_FILE" file-system-id efs-mount-point/

Efs-Utils is able to enter FIPS mode when mounting your file system. To enable FIPS you need to modify the EFS-Utils config file:

sed -i "s/fips_mode_enabled = false/fips_mode_enabled = true/" /etc/amazon/efs/efs-utils.conf

This will enable any potential API call from EFS-Utils to use FIPS endpoints and cause stunnel to enter FIPS mode

Note: FIPS mode requires that the installed version of OpenSSL is compiled with FIPS.

To verify that the installed version is compiled with FIPS, look for OpenSSL X.X.Xx-fips in the stunnel -version command output e.g.

$ stunnel -version
stunnel 4.56 on x86_64-koji-linux-gnu platform
Compiled/running with OpenSSL 1.0.2k-fips  26 Jan 2017
Threading:PTHREAD Sockets:POLL,IPv6 SSL:ENGINE,OCSP,FIPS Auth:LIBWRAP

For more information on how to configure OpenSSL with FIPS see the OpenSSL FIPS README.

By default, once an hour, the watchdog daemon service will check to see if a newer version of amazon-efs-utils is available on github or yum. You can disable this check by setting the enable_version_check field in /etc/amazon/efs/efs-utils.conf to false. For example,

sudo sed -i 's/enable_version_check = true/enable_version_check = false/' /etc/amazon/efs/efs-utils.conf

Or on MacOS:

VERSION=<efs-utils version, e.g. 1.34.1>
sudo sed -i 's/enable_version_check = true/enable_version_check = false/' /usr/local/Cellar/amazon-efs-utils/${VERSION}/libexec/etc/amazon/efs/efs-utils.conf

This code is made available under the MIT license.