ssfang / coolreader Goto Github PK
View Code? Open in Web Editor NEWThis project forked from amahule/coolreader
An Android based open e-book reader
This project forked from amahule/coolreader
An Android based open e-book reader
CoolReader 3 - free e-book reader (c) Vadim Lopatin, 1998-2009 LICENSE: All source codes (except thirdparty directory) are provided under the terms of GNU GPL license, version 2 Source codes are available at sourceforge: git clone git://crengine.git.sourceforge.net/gitroot/crengine/crengine Directories: crengine - CREngine (DOM/XML/CSS ebook rendering library) sources cr3gui - CR3 with CR3GUI for e-ink devices sources cr3qt - CR3 with Qt based GUI cr3wx - CR3 with wxWidgets based GUI thirdparty - third party libraries, to use if not found in system (zlib, libpng, libjpeg, freetype) tinydict - small library for .dict file format support tools - miscellaneous configuration files android - Android port External dependencies: common: zlib, libpng, libjpeg, freetype cr3gui/xcb: libxcb, fontconfig cr3gui/nanoX: libnanoX cr3/Qt: qt4-core, qt4-gui cr3/wx: wxWidgets 2.8 e.g., for Ubuntu you may use > sudo apt-get install git-core cmake libqt4-dev libpng12-dev libfreetype6-dev libjpeg62-dev libfontconfig1-dev zlib1g-dev Packaging: Debian based packages included to project: packages/ubuntu -- debian package for Ubuntu, with Qt frontend packages/openinkpot -- debian package for OpenInkpot, with XCB frontend To build debian package, copy one of package descriptions from packages directory: cp -r packages/ubuntu/debian debian Then, package can be built using `debuild` command. Build instructions: # Building QT version # libqt4-dev should be installed mkdir qtbuild cd qtbuild cmake -D GUI=QT -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=/usr .. make sudo make install # Building wxWidgets version # libwxgtk2.8-dev should be installed mkdir wxbuild cd wxbuild cmake -D GUI=WX -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=/usr .. make # Building ARM version on OpenInkpot: mkdir armbuild cd armbuild cmake -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-oi.cmake -D CMAKE_BUILD_TYPE=Release -D GUI=CRGUI_XCB -D USE_EXTERNAL_EDICT_DICTIONARY=1 .. make # Building i386 version (for OpenInkpot), V3 simulation: mkdir xcb-v3 cd xcb-v3 cmake -D DEVICE_NAME=v3 -D CMAKE_BUILD_TYPE=Debug -D USE_STATIC_ZLIB=1 -Wdev -D ENABLE_ANTIWORD=1 -D CMAKE_INSTALL_PREFIX=/usr -D GUI=CRGUI_XCB -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x500000 .. make # Building i386 version (for OpenInkpot), n516/azbooka simulation: mkdir xcb-n516 cd xcb-n516 cmake -D DEVICE_NAME=n516 -D CMAKE_BUILD_TYPE=Debug -D CMAKE_INSTALL_PREFIX=/usr -D GUI=CRGUI_XCB .. make # Building Jinke/LBook V3 viewer plugin (libfb2.so): mkdir v3build cd v3build mkdir dest cmake -D DEVICE_NAME=v3 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-v3.cmake -D GUI=CRGUI_JINKE_PLUGIN -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest .. make # Building Jinke/LBook V3 viewer plugin (libfb2.so), new SDK: mkdir v3build cd v3build mkdir dest cmake -D DEVICE_NAME=v3 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-linux-gnueabi.cmake -D GUI=CRGUI_JINKE_PLUGIN -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest .. make # Building Jinke/LBook V3 fb2props plugin for Bookshelf (libfb2props.so) i386: mkdir fb2props386 cd fb2props386 mkdir dest cmake -D GUI=FB2PROPS -D CMAKE_BUILD_TYPE=Debug -D CMAKE_INSTALL_PREFIX=dest .. make # Building Jinke/LBook V3 fb2props plugin for Bookshelf (libfb2props.so): mkdir v3fb2propsbuild cd v3fb2propsbuild mkdir dest cmake -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-v3.cmake -D GUI=FB2PROPS -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest .. make # Building Jinke/LBook V3 fb2props plugin for Bookshelf NEW SDK (libfb2props.so): mkdir v3newfb2propsbuild cd v3newfb2propsbuild mkdir dest cmake -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-linux-gnueabi.cmake -D GUI=FB2PROPS -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest .. make # Building Jinke/LBook V3 new SDK viewer app (cr3): mkdir v3app cd v3app cmake -D DEVICE_NAME=v3 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-linux-gnueabi.cmake -D GUI=CRGUI_NANOX -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x500000 -D BIG_PAGE_MARGINS=1 .. cmake -D DEVICE_NAME=v3 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-linux-gnueabi.cmake -D GUI=CRGUI_NANOX -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x500000 .. BIG_PAGE_MARGINS make # Building Jinke/LBook V5 viewer app (cr3): mkdir v5build cd v5build cmake -D DEVICE_NAME=v5 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-v5.cmake -D GUI=CRGUI_NANOX -D GRAY_BACKBUFFER_BITS=3 -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x580000 .. #cmake -D DEVICE_NAME=v5 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-v5.cmake -D GUI=CRGUI_NANOX -D GRAY_BACKBUFFER_BITS=3 -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest .. make # Building Jinke/LBook V3+ viewer app (cr3): mkdir v3abuild cd v3abuild cmake -D DEVICE_NAME=v3a -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-v5.cmake -D GUI=CRGUI_NANOX -D GRAY_BACKBUFFER_BITS=4 -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x1000000 .. make ============================== *** QT Build under Windows *** ============================== Using QT SDK Environment setup: - Download and install QT SDK, git, cmake, msys - Copy contents of git and cmake dirs to QT/mingw/ - Copy make.exe from msys/bin to QT/mingw/bin Run Qt SDK / Qt Command Prompt. Execute: > sh > git clone git://crengine.git.sourceforge.net/gitroot/crengine/crengine > mv crengine cr3 > cd cr3 > mkdir qtbuild > cd qtbuild > cmake -D GUI=QT -D CMAKE_BUILD_TYPE=Release -G "MSYS Makefiles" -D USE_QT_ZLIB=1 -D CMAKE_INSTALL_PREFIX=dist .. > make > make install cmake -D GUI=QT -D CMAKE_BUILD_TYPE=Release -G "Visual Studio 9 2008" -D USE_QT_ZLIB=1 -D DOC_DATA_COMPRESSION_LEVEL=3 -D DOC_BUFFER_SIZE=0x1500000 -D CMAKE_INSTALL_PREFIX=dist .. It will put built cr3.exe and all necessary distribution files to directory qtbuild/dist. You need also add following DLLs to this directory in order to get cr3.exe working: - mingwm10.dll - QtCore4.dll - QtGui4.dll - libz.dll
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.