sssata / hyku Goto Github PK

https://www.virustotal.com/gui/file/f2be18641b26b0859a44b448bd3fa2411ac91ecd61323931bfb94f685eb6d2e6/detection

Google Chrome keeps saying it detected virus and doesn't let me download the release. Any idea?

There's no words or comments on the status of Linux support for this driver in the README, so I assume it is unsupported. Maybe that would be good to add to the README that it's not supported yet?

It doesn't seem like it's working with multi monitor environment.
I currently have three monitors, and the configurator still shows 1920*1080, and the screen area is basically stretched on the tablet.
Can we have an option to choose one of the active monitors?

its all lit up and i have the driver you made but the cursor does not move whatsoever.

Hi there,

I've recently attempted to update the firmware for my tablet to v0.5, but it would seem that HYKU_Configurator.exe stopped responding shortly after the CMD window popped up.

I went ahead and restarted the executable, but it would seem that the program isn't able to detect the tablet anymore.

I suspect that the tablet may be stuck in a certain mode given that its LED is fading between green and yellow/orange as it may have been waiting for the executable to flash the firmware to the device around when it stopped responding.

Some details that may have contributed to this happening include:

• I replaced the version of the executable to the latest build (v0.5) from a previous version that didn't have a third tab dedicated to calibrating and flashing new firmware to the device before doing any of this
• Upon seeing how that new executable required me to update the firmware on the device to v0.5 in order to upload any settings, I went ahead and fetched the firmware in that 3rd tab and attempted to start that process with v0.5 of the .exe instead of v0.4 of the .exe

What I have done to try and to remedy this issue so far:

• reconnecting the tablet with the executable open/running
• reconnecting the tablet and holding down the gateron switch while plugging the cable back into it with the executable open/running
• ^doing both of those things with the executable closed, and then opening/running the executable
• ^doing all of the above with the previous version of the executable that I was using prior to this

Here are the error prompts I currently get when trying to upload any settings or flash any firmware to the device:

An additional detail I just now found is that Device Manager does seem to respond to me disconnecting/reconnecting the device to the computer along with the usb device connection sounds playing.

If my tablet is indeed stuck in a certain mode waiting for the .exe to flash firmware to it, is there a way to reset the device? (so that it would able to reconnect to my pc in its "factory" default mode which would be detectable to the .exe)