This role creates persistent VXLAN interfaces with the use of Network Scripts, NetworkManger, or Systemd-Networkd.

The role uses the same variable names as Network Scripts. It is recommended to review the documentation on Network Scripts. Below are the variables relevant and supported by this role.

vxlan_vni: sets the VXLAN network identifier for the VXLAN interfaces

vxlan_ttl: set the time-to-live for the packets transmitted over the interface

vxlan_phys_dev: set the physical device for the VXLAN interface to pair with

vxlan_dstport: set the port for the VXLAN to reside on

vxlan_bootproto: specify boot protocol used with the interface (unsupported when using NetworkManger or Systemd-Networkd, always none)

vxlan_onboot: set to yes if the VXLAN interface should be brought up on boot otherwise no (Not supported on Systemd-networkd)

vxlan_interfaces: list of interfaces to be created can set specific instances of the variables defined above in addition to some others

device: name assigned the VXLAN interface

ipaddr: the IPV4 address assigned to the VXLAN interface (unsupported when using NetworkManger or Systemd-Networkd)

prefix: the subnet mask use with the ipaddr (unsupported when using NetworkManger or Systemd-Networkd)

group: the multicast group the VXLAN will operate on

bridge: if set establish a bridge between this VXLAN and the specified interface

By default, Network Scripts will be used unless it is unavailable. Usage of either Network Scripts, NetworkManager or Systemd-Networkd can be enforced by setting force_ns, force_nm, or force_sd to true.

Include the role into a playbook as you would any other role.

- hosts: host1
  roles:
    - role: vxlan
      vars:
        vxlan_vni: 10
        vxlan_interfaces:
          - device: vxlan0
            ipaddr: 192.168.0.2
            group: 224.0.0.100

For variables such as vxlan_ipaddr it is best to define them on a host by host basis.

vxlan_interfaces:
  - device: vxlan0
    ipaddr: 192.168.0.2
    group: 224.0.0.100

vxlan_interfaces:
  - device: vxlan0
    ipaddr: 192.168.0.3
    group: 224.0.0.100

You may also define multiple VXLAN interfaces per host however you must provide a unique vxlan_vni for each device defined in vxlan_interfaces

vxlan_interfaces:
  - device: vxlan0
    vni: 10
    group: 224.0.0.200
  - device: vxlan1
    vni: 20
    group: 224.0.0.200

You may also set a bridge for vxlan interface to operate over.

vxlan_interfaces:
  - device: vxlan0
    group: 224.0.0.10
    bridge: breth1

Apache License 2.0

StackHPC