stangri / repo.openwrt.melmac.net Goto Github PK

OpenWrt/LEDE Project Packages Repository

Standard ML 100.00%

openwrt packages openvpn simpleadblock adblock fakeinternet based policy routing wireguard

repo.openwrt.melmac.net's Introduction

stangri's OpenWrt packages

This repo contains binaries for the packages I'm maintaining for OpenWrt. For more information check out documentation or browse code at GitHub.

repo.openwrt.melmac.net's People

Contributors

Stargazers

Watchers

Forkers

jn7163 alliswell2day rpf16rj m33ft tml3nr mattias197711

repo.openwrt.melmac.net's Issues

Cannot install package luci-app-pbr

root@OpenWrt:~# opkg install pbr-iptables luci-app-pbr
Installing pbr-iptables (1.0.1-3) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/packages/arm_cortex-a9_vfpv3-d16/packages/pbr-iptables_1.0.1-3_all.ipk
Installing libelf1 (0.186-1) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/packages/arm_cortex-a9_vfpv3-d16/base/libelf1_0.186-1_arm_cortex-a9_vfpv3-d16.ipk
Installing libbpf20220308 (2022-03-08-04c465fd-1) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/packages/arm_cortex-a9_vfpv3-d16/base/libbpf20220308_2022-03-08-04c465fd-1_arm_cortex-a9_vfpv3-d16.ipk
Installing ip-full (5.15.0-3) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/packages/arm_cortex-a9_vfpv3-d16/base/ip-full_5.15.0-3_arm_cortex-a9_vfpv3-d16.ipk
Installing resolveip (2) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/packages/arm_cortex-a9_vfpv3-d16/base/resolveip_2_arm_cortex-a9_vfpv3-d16.ipk
Installing kmod-nf-ipt (5.10.146-1) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/kmod-nf-ipt_5.10.146-1_arm_cortex-a9_vfpv3-d16.ipk
Installing kmod-ipt-core (5.10.146-1) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/kmod-ipt-core_5.10.146-1_arm_cortex-a9_vfpv3-d16.ipk
Installing kmod-ipt-ipset (5.10.146-1) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/kmod-ipt-ipset_5.10.146-1_arm_cortex-a9_vfpv3-d16.ipk
Installing libipset13 (7.15-2) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/packages/arm_cortex-a9_vfpv3-d16/base/libipset13_7.15-2_arm_cortex-a9_vfpv3-d16.ipk
Installing ipset (7.15-2) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/packages/arm_cortex-a9_vfpv3-d16/base/ipset_7.15-2_arm_cortex-a9_vfpv3-d16.ipk
Installing libip4tc2 (1.8.7-7) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/libip4tc2_1.8.7-7_arm_cortex-a9_vfpv3-d16.ipk
Installing libip6tc2 (1.8.7-7) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/libip6tc2_1.8.7-7_arm_cortex-a9_vfpv3-d16.ipk
Installing libxtables12 (1.8.7-7) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/libxtables12_1.8.7-7_arm_cortex-a9_vfpv3-d16.ipk
Installing libiptext0 (1.8.7-7) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/libiptext0_1.8.7-7_arm_cortex-a9_vfpv3-d16.ipk
Installing libiptext6-0 (1.8.7-7) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/libiptext6-0_1.8.7-7_arm_cortex-a9_vfpv3-d16.ipk
Installing xtables-legacy (1.8.7-7) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/xtables-legacy_1.8.7-7_arm_cortex-a9_vfpv3-d16.ipk
Installing iptables-zz-legacy (1.8.7-7) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/iptables-zz-legacy_1.8.7-7_arm_cortex-a9_vfpv3-d16.ipk
Installing kmod-ipt-ipopt (5.10.146-1) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/kmod-ipt-ipopt_5.10.146-1_arm_cortex-a9_vfpv3-d16.ipk
Installing iptables-mod-ipopt (1.8.7-7) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/targets/mvebu/cortexa9/packages/iptables-mod-ipopt_1.8.7-7_arm_cortex-a9_vfpv3-d16.ipk
Installing luci-app-pbr (1.0.1-3) to root...
Downloading https://repo.openwrt.melmac.net/luci-app-pbr_1.0.1-3_all.ipk
Installing pbr (1.0.1-3) to root...
Downloading https://downloads.openwrt.org/releases/22.03.2/packages/arm_cortex-a9_vfpv3-d16/packages/pbr_1.0.1-3_all.ipk
Configuring libelf1.
Configuring libbpf20220308.
Configuring ip-full.
Configuring resolveip.
Configuring kmod-nf-ipt.
Configuring kmod-ipt-core.
Configuring kmod-ipt-ipset.
Configuring libipset13.
Configuring ipset.
Configuring libip4tc2.
Configuring libip6tc2.
Configuring libxtables12.
Configuring libiptext0.
Configuring libiptext6-0.
Configuring xtables-legacy.
Configuring iptables-zz-legacy.
Configuring kmod-ipt-ipopt.
Configuring iptables-mod-ipopt.
Configuring pbr-iptables.
Installing rc.d symlink for pbr... OK
ERROR: The pbr service is currently disabled!
Collected errors:
 * check_data_file_clashes: Package pbr wants to install file /etc/hotplug.d/iface/70-pbr
        But that file is already provided by package  * pbr-iptables
 * check_data_file_clashes: Package pbr wants to install file /etc/init.d/pbr
        But that file is already provided by package  * pbr-iptables
 * check_data_file_clashes: Package pbr wants to install file /etc/uci-defaults/90-pbr
        But that file is already provided by package  * pbr-iptables
 * check_data_file_clashes: Package pbr wants to install file /usr/share/pbr/pbr.firewall.include
        But that file is already provided by package  * pbr-iptables
 * check_data_file_clashes: Package pbr wants to install file /usr/share/pbr/pbr.user.aws
        But that file is already provided by package  * pbr-iptables
 * check_data_file_clashes: Package pbr wants to install file /usr/share/pbr/pbr.user.netflix
        But that file is already provided by package  * pbr-iptables
 * opkg_install_cmd: Cannot install package luci-app-pbr.

Target Platform | mvebu/cortexa9
Firmware Version | OpenWrt 22.03.2 r19803-9a599fee93 / LuCI openwrt-22.03 branch git-22.288.45147-96ec0cd
Kernel Version | 5.10.146

Installing using the GitHub repo

Cannot find dependency libubus20220601 for pbr-iptables

Can't install on OpenWrt 21.02.3 r16554-1d4dea6d4f / LuCI openwrt-21.02 branch git-22.083.69138-0a0ce2a. Repo added just fine, but seems to be a missing depenency.

Add repo to LEDE 17.01.0

I'm trying but no success.
This repository is working?
I tried this code

echo -e -n 'untrusted comment: public key 7ffc7517c4cc0c56\nRWR//HUXxMwMVnx7fESOKO7x8XoW4/dRidJPjt91hAAU2L59mYvHy0Fa\n' > /tmp/stangri-repo.pub && opkg-key add /tmp/stangri-repo.pub
! grep -q 'stangri_repo' /etc/opkg/customfeeds.conf && echo 'src/gz stangri_repo https://raw.githubusercontent.com/stangri/openwrt-repo/master' >> /etc/opkg/customfeeds.conf
opkg update

I tried add from luci web ui custom source but fails when I try update the packages list from https://raw.githubusercontent.com/stangri/openwrt-repo/master

Service Status [ Running | Stopped ] - Command required for the status

I need a command to get Service Status [ Running | Stopped ].

Under unknown circumstances, PBR stops working and the service stops. For a script I need the command to query the service status [Running or Stopped].

If i run the command service pbr status | grep stopped when PBR has stopped, it return nothing.
Also the command service pbr running return nothing.

Please tell me which command is used to query the current status (Running or Stopped). 🙂

error with luci-app-vpn-polic routing

Hi,

I'm getting an error when I click "add" in the web interface when trying to add a new policy.

I get a web page with the following error.

Failed to execute cbi dispatcher target for entry '/admin/services/vpn-policy-routing'.
The called action terminated with an exception:
/usr/lib/lua/luci/cbi.lua:165: Datatype error, bad token "'"
stack traceback:
[C]: in function 'error'
/usr/lib/lua/luci/cbi.lua:165: in function 'compile_datatype'
/usr/lib/lua/luci/cbi.lua:177: in function 'compile_datatype'
/usr/lib/lua/luci/cbi.lua:177: in function 'compile_datatype'
/usr/lib/lua/luci/cbi.lua:177: in function 'compile_datatype'
/usr/lib/lua/luci/cbi.lua:189: in function 'verify_datatype'
/usr/lib/lua/luci/cbi.lua:1497: in function 'validate'
/usr/lib/lua/luci/cbi.lua:1413: in function 'parse'
/usr/lib/lua/luci/cbi.lua:1549: in function 'parse'
/usr/lib/lua/luci/cbi.lua:248: in function 'parse'
/usr/lib/lua/luci/cbi.lua:1184: in function 'parse'
/usr/lib/lua/luci/cbi.lua:248: in function 'parse'
/usr/lib/lua/luci/cbi.lua:387: in function 'parse'
/usr/lib/lua/luci/dispatcher.lua:856: in function </usr/lib/lua/luci/dispatcher.lua:835>

I'm using luci-app-vpn-policy-routing_git-19.284.27115-3688774-62_all.ipk
with vpn-policy-routing - 0.2.0-1
and
Firmware Version OpenWrt 18.06.4 r7808-ef686b7292 / LuCI openwrt-18.06 branch (git-19.170.32094-4d6d8bc)
Kernel Version 4.14.131

Any help would be greatly appreciated.

Url repo not work

The url https://raw.githubusercontent.com/stangri/openwrt-repo/master not work.

Public key to verify the package signatures?

The pre-built repo is very nice! But where is the key-build.pub that could be used to verify the package signatures?

Can't add this repo to the feeds list to compile OpenWrt

I tried to compile OpenWrt with some of the packages on this repo (vpn-policy-routing and luci-app-vpn-policy-routing) but could't find the way to correctly add it to the feeds.

The instructions on the webpage are for the Image Builder and SDK. I didn't figure out the way to do it by adding the repo to the file feeds.conf.default. When later running make menuconfig, the packages showed nowhere.

The way I did it was adding the git repo url preceded by the key src-git like:
src-git stangri_repo https://github.com/stangri/openwrt_packages.git

I ended up giving up and deciding to install it manually once the binary was flashed but I encountered #11

Update LuCI Rosy Theme Package

Thanks for creating a great repository! It seems the LuCI Rosy Theme has been updated and since been included in mainline builds. I'm continuing to use your repository in the interim, and appreciate the IPK Package inclusions.

I was wondering if there would be a way to get a current / latest build of the LuCI Rosy Theme included?

Please see the following links to view the UI changes as well as forum thread regarding some of the other changes to the theme since then:

Thanks again!

`vpn-policy-routing`'s "Word about Default Routing" is confusing

A Word About Default Routing reads:

Service does not alter the default routing. Depending on your VPN tunnel settings (and settings of the VPN server you are connecting to), the default routing might be set to go via WAN or via VPN tunnel. This service affects only routing of the traffic matching the policies. If you want to override default routing, follow the instructions below.

[followed by instructions]

What does any of this mean? It sounds like the default routing could be either WAN or VPN. What does "override [the] default routing" mean in this context? Swap? Do something else? It's unclear from the instructions that follow.

I think what this means to say is that if the default routing is to the VPN and not WAN, something like pull-filter ignore "redirect-gateway" can make it so that not all traffic goes through the VPN. It's unclear how that setting would help with the opposite (i.e., where the default was WAN).

Error when start

Good morning
I use ROOTer fw on my Lynksys WRT3200 . On 21.02.snap and 19.07.6 I see the following error when vpnbypass starts but:

all works with openvpn
doesnt work with wireguard
version of vpnbypass 1.3.2-1

Thu Feb 9 12:27:21 2023 daemon.err modprobe: xt_set is already loaded
Thu Feb 9 12:27:21 2023 daemon.err modprobe: ip_set is already loaded
Thu Feb 9 12:27:21 2023 daemon.err modprobe: ip_set_hash_ip is already loaded
Thu Feb 9 12:27:21 2023 user.notice vpnbypass [11293]: ERROR: iptables -t mangle -D PREROUTING -m mark --mark 0x00/0xff0000 -g VPNBYPASS
Thu Feb 9 12:27:21 2023 user.notice vpnbypass [11293]: service started with TID: 200; FW_MARK: 0x010000
Thu Feb 9 12:27:21 2023 user.notice vpnbypass [11293]: service monitoring interfaces: VPN VPNS TAP TAPS wan1

also vpnbypass doesnt start after router reboot.

Cannot find vpn-policy-routing package during opkg install

I am trying to install vpn-policy-routing and luci-app-vpn-policy-routing using the instructions I found on GitHub.

I am attempting this on a GL-iNet MT300N router running OpenWRT 18.6.4.

Your repository was successfully added to /etc/opkg/customfeeds.conf:

# add your custom package feeds here
#
# src/gz example_feed_name http://www.example.com/path/to/files
src/gz stangri_repo https://raw.githubusercontent.com/stangri/openwrt-repo/master

When I run opkg install vpn-policy-routing I get the following:

root@GL-MT300N-V2:~# opkg install vpn-policy-routing -V3 | grep -e "policy"
opkg_prepare_url_for_install: applying abpkg flag to vpn-policy-routing
pkg_hash_load_package_details_helper: found yet incomplete flagged abpkg vpn-policy-routing
pkg_hash_load_package_details_helper: skipping already seen flagged abpkg vpn-policy-routing
Unknown package 'vpn-policy-routing'.
Collected errors:
 * opkg_install_cmd: Cannot install package vpn-policy-routing.
root@GL-MT300N-V2:~#

Looking at the okg source, that "applying abpkg flag" message is associated with flagging the package state as SF_NEED_DETAIL and the presence of that flag indicates an error and the package is not loaded.

I am running version 3b417b9f41b4ceb5912d82f867dd5534e5675b5c (2017-12-07) of opkg.

Is there something wrong with the repository or its packages.gz file?

I've attached a -V4 opkg output to see if this helps.

Thanks...

opkg install debug.txt

Cannot get pbr working reliably with 3 VPNs

Trying to get pbr working using wan and 3 VPNs (1 Wireguard (tun_w) and 2 OpenVpn (tun_o1, tun_o2)).
I'm on OpenWrt 22.03.3 x86/64, tried both with and without the dnsmasq-full's nft sets.
Used to work fine on previous OpenWrt versions using the vpn-policy-routing.
No matter what I try, I'm only able to switch between wan and the tun_w. The strange thing is that occassionaly assigning the iterface to one of the tun_o works for some reason, but then it goes down by itself.

All in all, it goes as follows:

pbr setting:  effective:
tun_o1        tun_w
tun_o2        tun_w (sometimes tun_o1 (not a typo))
tun_w         tun_w
br-wan        br-wan

All the interfaces are up and the host is able to access them just fine:

curl --interface tun_o1 https://ipecho.net/plain/
169.1...
curl --interface tun_o2 https://ipecho.net/plain/
163.1...
curl --interface tun_w https://ipecho.net/plain/
104.2...
curl --interface br-wan https://ipecho.net/plain/
109.2...

And that's a test fresh install, just installed pbr and configured the interfaces.

The relevant configs are as follows:

/etc/config/pbr:
config pbr 'config'
        option strict_enforcement '1'
        option resolver_set 'none'
        option ipv6_enabled '0'
        option boot_timeout '30'
        option rule_create_option 'add'
        option procd_reload_delay '1'
        list webui_supported_protocol 'all'
        list webui_supported_protocol 'tcp'
        list webui_supported_protocol 'udp'
        list webui_supported_protocol 'tcp udp'
        list webui_supported_protocol 'icmp'
        option verbosity '1'
        list ignored_interface 'vpnserver'
        list ignored_interface 'wgserver'
        list ignored_interface 'eth0 br-lan'
        option webui_show_ignore_target '0'
        list supported_interface 'wan'
        list supported_interface 'tun_o1'
        list supported_interface 'tun_o2'
        list supported_interface 'tun_w'
        option enabled '1'

config policy
        option name 'test'
        option dest_addr 'ipleak.net ipecho.net'
        option interface 'vpn_o1'


/etc/config/network:
config interface 'vpn_o2'
        option proto 'none'
        option device 'tun_o2'

config interface 'vpn_o1'
        option proto 'none'
        option device 'tun_o1'

config interface 'vpn_w'
        option proto 'none'
        option device 'tun_w'

config device
        option name 'tun_o2'
        option ipv6 '0'

config device
        option name 'tun_o1'
        option ipv6 '0'

config device
        option name 'tun_w'
        option ipv6 '0'


/etc/config/firewall:
config zone
        option name 'vpn_w'
        option output 'ACCEPT'
        option masq '1'
        option mtu_fix '1'
        list network 'vpn_w'
        option input 'REJECT'
        option forward 'REJECT'

config forwarding
        option src 'lan'
        option dest 'vpn_w'

config zone
        option name 'vpn_o1'
        option output 'ACCEPT'
        option masq '1'
        option mtu_fix '1'
        list network 'vpn_o1'
        option input 'REJECT'
        option forward 'REJECT'

config zone
        option name 'vpn_o2'
        option output 'ACCEPT'
        option masq '1'
        option mtu_fix '1'
        list network 'vpn_o2'
        option input 'REJECT'
        option forward 'REJECT'

config forwarding
        option src 'lan'
        option dest 'vpn_o1'

config forwarding
        option src 'lan'
        option dest 'vpn_o2'


route:
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         172.1-----      192.0.0.0       UG    0      0        0 tun_w
default         10.0.0.1        0.0.0.0         UG    0      0        0 br-wan
10.0.0.0        *               255.255.252.0   U     0      0        0 br-lan
10.0.0.0        *               255.255.252.0   U     0      0        0 br-wan
10.1-----       *               255.255.0.0     U     0      0        0 tun_o1
10.4-----       *               255.255.248.0   U     0      0        0 tun_o2
64.0.0.0        172.1-----      192.0.0.0       UG    0      0        0 tun_w
128.0.0.0       172.1-----      192.0.0.0       UG    0      0        0 tun_w
162.1-----      10.0.0.1        255.255.255.255 UGH   0      0        0 br-lan
172.1-----      *               255.255.255.0   U     0      0        0 tun_w
192.0.0.0       172.1-----      192.0.0.0       UG    0      0        0 tun_w
224.0.0.0       10.0.0.1        240.0.0.0       UG    0      0        0 br-lan

Not sure what is possibly wrong with my config.

Can't install vpn-policy-routing on my own built system

I tried to install both luci-app-vpn-policy-routing and vpn-policy-routing on a system I build instead of using the provided binary for my device. I get the following error on LuCi:

Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for vpn-policy-routing:
 * 	kernel (= 4.14.131-1-94e97c3b21ec52cb72cec4eaff828985)
 * opkg_install_cmd: Cannot install package vpn-policy-routing.

My kernel version, as per uname -r is 4.14.131

I don't know what the optimal solution is but maybe removing the restriction to use the kernel version of the "official" binary release is the way to go.

Prominently identify key feature differences between `vpn-policy-routing` and `vpnbypass` in documentation where newcomers are likely to land and benefit from guidance

It's how much overlap there is between vpn-policy-routing and vpnbypass. At first blush, they seem to solve similar problems, but it's not clear which use cases would be better served by which packages.

Is vpn-policy-routing for identifying small slices of traffic for use with a VPN, where not routing through the VPN is the default (i.e., opt-in to the VPN), where vpnbypass is for identifying small slices of traffic to bypass a VPN, where traffic is routed through the VPN is the default (i.e., opt-out of the VPN)?

Perhaps this can be documented in each respective READMEs?

Something like:

vpn-policy-routing is good when you're [insert use cases here]. If you're looking for something to do [other use cases here], check out vpnbypass instead.

And vice versa for vpnbypass.

Can't install simple-adblock "Signature check failed."

executing opkg update returns the following:

Downloading https://raw.githubusercontent.com/stangri/openwrt-repo/master/Packages.gz
Updated list of available packages in /var/opkg-lists/stangri_repo
Downloading https://raw.githubusercontent.com/stangri/openwrt-repo/master/Packages.sig
Signature check failed.
Remove wrong Signature file.

`vpn-policy-routing` OpenVPN instructions confusion/contradictions?

Basic OpenVPN Client Config indicates that one should create this interface:

config interface 'vpnc'
  option proto 'none'
  option ifname 'ovpnc0'

This seems to conflict with the earlier instructions in Local OpenVPN Server + OpenVPN Client (Scenario 1):

config interface 'vpnclient'
  option proto 'none'
  option ifname 'ovpnc0'

Are those interfaces meant to be the same (or solve similar problems)? Are their names different for a reason? Those two sections can't be combined, correct? (Meaning they are mutually exclusive?) The docs aren't quite clear on this point.

error downloading packages from custom repository

Hello,

I've followed the instructions provided but am getting an error on opkg update:

Downloading https://raw.githubusercontent.com/stangri/openwrt-repo/master/Packages.gz
*** Failed to download the package list from https://raw.githubusercontent.com/stangri/openwrt-repo/master/Packages.gz
Downloading http://downloads.openwrt.org/snapshots/targets/ath79/generic/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_core
Downloading http://downloads.openwrt.org/snapshots/targets/ath79/generic/packages/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/targets/ath79/generic/kmods/4.19.71-1-cc50d72d667dd6eeed2a23087f817934/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_kmods
Downloading http://downloads.openwrt.org/snapshots/targets/ath79/generic/kmods/4.19.71-1-cc50d72d667dd6eeed2a23087f817934/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_base
Downloading http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/packages/mips_24kc/luci/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_luci
Downloading http://downloads.openwrt.org/snapshots/packages/mips_24kc/luci/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/packages/mips_24kc/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_packages
Downloading http://downloads.openwrt.org/snapshots/packages/mips_24kc/packages/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/packages/mips_24kc/routing/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_routing
Downloading http://downloads.openwrt.org/snapshots/packages/mips_24kc/routing/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/packages/mips_24kc/telephony/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_telephony
Downloading http://downloads.openwrt.org/snapshots/packages/mips_24kc/telephony/Packages.sig
Signature check passed.
Collected errors:
 * opkg_download: Failed to download https://raw.githubusercontent.com/stangri/openwrt-repo/master/Packages.gz, wget returned 5.
root@OpenWrt:~# cat /etc/opkg/customfeeds.conf 
# add your custom package feeds here
#
# src/gz example_feed_name http://www.example.com/path/to/files
src/gz stangri_repo https://raw.githubusercontent.com/stangri/openwrt-repo/master

Can you identify what I've set up improperly? My system is a snapshot from the last couple days so maybe the issue is there?

Thanks,
Eric

Add new IPK - Argon Theme

Thanks for creating this repository. However, I'd like to see the luci-theme-argon added to it.
I hope that this ca happen and will be happy if it does.
Thanks!

Malformed package file luci-app-pbr_0.9.9-9_all.ipk

Hi - really excited to try pbr

I followed the instructions here but opkg update gives

Downloading https://cdn.jsdelivr.net/gh/stangri/repo.openwrt.melmac.net/Packages.sig
Premature end of file
Signature check failed.

Tried to wget the ipk to do a manual opkg install which gives

opkg install luci-app-pbr_0.9.9-9_all.ipk 
Collected errors:
 * pkg_init_from_file: Malformed package file luci-app-pbr_0.9.9-9_all.ipk.

Sorry if it's something obvious and not related to the source file - I don't really understand opkg that well. Thought it might have something to do with the recent update to pbr but I get the same with the luci-app-https-dns-proxy_2022-10-15-6_all.ipk

cant add repo

i tried add repo on openwrt 18.06, added keys like in readme but get this response when update lists:

opkg_download: Failed to download https://raw.githubusercontent.com/stangri/openwrt-repo/master/Packages.gz, wget returned 5.

PBR "Unknown Warning" OpenWRT 22.03.5

-- removed and put in forum, apologies --

vpn-policy-routing package missing in repo

Hi,

for the first, thanks for your brilliant job! I am using this package and other from your repo since you started. it solved a lot of problems I had!

The package vpn-policy-routing is missing in repo. I tried to install it on a fresh flash but could not find the package so I get the error unkown package.

Is there a problem with this package or will you put it online again soon?

THX!

//Thomas