upgrading from Sonoff-Tasmota 6.5.0.11 stb-1.5 by Theo Arends about sonoff-tasmota HOT 7 CLOSED

Yes, please export your settings first. Then follow the upgrade procedure for like you have normal tasmota 6.5 version. There are some updates with the -minimal version required until you can go to version 10.

from sonoff-tasmota.

Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)
--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)
--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

from sonoff-tasmota.

well... that didn't go well....
I upgraded to 6.7.1 then the switch became unavailable, not responsive to touch also... I believe I'll have to flash the firmware again....

from sonoff-tasmota.

So I flashed from scratch, but im unable to restore from backup...
any idea?

from sonoff-tasmota.

@stefanbode
OK, I recovered the switch (phew, there were many changes from your fork to the main Tasmota!)
Now it is working nice.

1. One feature is missing and I couldn't find how to config it:
   when the shutters are opening e.g. and I press the Down button it stops. I want the shutters to change direction in that case as it was in your fork.
   How do I do that please?

2. any idea why the upgrade didn't work properly and how I will be able to do it easily for all other modules OTA?

from sonoff-tasmota.

Solved it - I had to command reset 6 before I started the upgrade.
Now everything is great.
tnx.

from sonoff-tasmota.

There a different command for every use case. You can assign buttons to the commands. Take a look into the very long documentation

from sonoff-tasmota.