ubuntu linux下建立stm32开发环境: GCC安装以及工程Makefile建立: http://www.embbnux.com/2014/02/01/linux_stm32_gcc_makefile/

ubuntu linux下建立stm32开发环境: 程序烧录 openocd+openjtag: http://www.embbnux.com/2014/02/01/linux_stm32_use_openocd_openjtag/

You need some tools as follows:

• stm32flash
  Flash program for the STM32 ARM processors using the ST serial bootloader over UART or I2C
• coreutils
  Readlink
• gcc-arm-none-eabi

install some tools that make need:

$ brew install autoconf

$ brew install automake

$ brew install pkg-config

Then install stm32flash:

$ git clone https://github.com/ARMinARM/stm32flash
$ cd stm32flash
$ make

$ brew install coreutils

$ brew install gcc-arm-none-eabi

$ cd stm32_development_on_linux
$ open Makefile.common

Change line 32:

TOP=$(shell greadlink -f "$(dir $(lastword $(MAKEFILE_LIST)))")