surasia / infinite-spartans-pack Goto Github PK

Stretching on belt when crouched

All four of the S2 chest pieces for Mark VII are not present.

M2497 Pouches
Drachen Ordnance Pack
Packrat Rig
and the Kontakt Plate.

Plus the Vapor Eagle hip attachment.

Plus like 11 sets of gloves. Mirus, Chiron, Hope's Vice, Ank, Velvet Glove, Flexpoint, Provespa, Crystal, Walle, Ploan, and Corvan.

Another 11 shoulder plates. HIGHCOM Sentinel, Deming, Philes, Cambra, Gidos, Chaka, Farah, Toktu, Renfu, Tomris, and HYBL.

3 sets of knee pads, BF, DP, and AS.

DEACONCREST and STEPSWEEP Wrist attachments.

This is how it looks normally

This is how it looks if you move the foot up and/or rotate the thigh armor a bit

Prosthetic Shins are Unrigged

At a certain point this happens, it's on both sides

There seems to bee floating bits for the Prosthetic Gloves when you move the fingers

As the title says, that attachment sits too low on the Commando helmet. Simple fix, just bringing it to attention

The UV mapping is miss aligned for the right Mark V shoulder. its pretty simple fix though.

The bit to the left isn't rigged, the bit to the right if rigged to f_middle.03.L, should be f_ring.03.L since it lines up with that. Image two is simple, the bit just isn't rigged

Image 1 and 2, this is just a Princibled BSDF, for both sides on MKB Prosthetics, Not sure if this is intentional or not

This happens when you move the left foot for MKVI

Currently Jorge's colors, request to submit improvement issue was made.

Most of the torso attachments are not uniform with the rest of the armour pieces either, although they are uniform with torso attachments colors.

These things are using the 2.4 shader, this is on both sides. Eagle Strike Core for both

File name for the ASG and Mask 1 are too long so Blender ends up cutting off the name and that includes the file format which in this case be ".png"
The model will show the edge wear/dirt and correct colors in evee but once rendering in Cycles it breaks.

Image texture node showing the names being cut off:

Cycles:

Evee:

Only a principled BSDF and material output exists, no textures

There seems to be a Minor Clipping issue, images below. These are on both sides

UV map is slightly off on the torso.

Journeyman, Jacknife, CloudJumper and Dog Harness does not scale or deform to the rig properly.

The mid torso seems to be unrigged

Weighting issues under the armpits when arms are lifted
Weighting issue on right wrist, not an issue on left

title

https://media.discordapp.net/attachments/1019633195387453540/1020087355262115850/unknown.png?width=1080&height=757

The two verts / edge (see image) stays in place and does not deform with the rest of the mesh creating a warped pointy bit on the mesh whenever moving the Yoroi Upper Arm [L].

• fabric suede
• linen rough
• paint brushed
• enamel smooth

Noticed a weird area with the colors on the neck area inside the Air Assault helmet. I switched the colors to make it easier to be able to see where each area is effected. Looks like bits from Zone 1, 3, and 5. (Also they're shaped like teeth, is that intentional?)

• reach helmet gear 008
• samurai helmet gear 004
• boot mc117
• glove samurai prosthetic
• knee reach prosthetic
• shin reach prosthetic

The Rakshasa Gloves Prosthetic [L] does not respond to the rig and shows up as incorrectly scaled.
The fingers on the right Prosthetic does not deform with the rig and stays in the default A-pose.

^^^
As seen in the picture there seems to be an issue with the forearm connecting to the elbow when moving the arm. I only have the issue for Mark V [B] the rest of the Spartans seem to be okay.

Default Reach knife and Security Kukri missing from the Torso Attachments folder.

MK V (B) Prosthetic shins and knees don't seem to line up when moving. This happens on both sides.

no normal maps are present

Lil guy is just chilling

edit: same issue on reach_spartan_hip_gear_004_s001

There is an odd area on the Commando shoulders where part of the texture appears pixelated. As you said in the Discord, this is likely due to a low-quality AO map.

Screenshot attached.

Upper arm Prosthetics for both sides are on 2.4

Doesn't seem to be proporly weighted/ rigged

This video shows me attempting to retarget the Spartan 3.0 Armature to a MoCap from mixamo. The suit itself works properly but the armor is sent underneath everything

Lower Half of the Twin Teeth hip attachment is clipping through the hip of the eagle strike core

Magazine holder is fabric when usually plastic smooth or smooth metal as seen in TAC/Recon Package and TAC/MAT-2519C Communicator.

T-Mags:

TAC/Recon Package:

TAC/MAT-2519C Communicator:

Minor MKV (B) clipping with Desert Patrol torso attachment. As stated, it's minor

When moving the root or the head the Metashak Tallyho translates more than intended. Example: moving rig from origin 1 unit in X axis will move the attachment more than 1 unit making the attatchment float away from the spartan whenever the rig is slightly moved or adjusted.

1. Prostetic Forarms elbow doesn't bend when moveing the arm,

2. The toe bone doesn't do anything