Comments (3)
gidoBOSSftw5731
commented on August 10, 2024
Relevant journalctl except:
Sep 30 16:24:08 gframe systemd[1]: Started fw-fanctrl.service - FrameWork Fan Controller.
░░ Subject: A start job for unit fw-fanctrl.service has finished successfully
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ A start job for unit fw-fanctrl.service has finished successfully.
░░
░░ The job identifier is 147846.
Sep 30 16:25:53 gframe python3[1147900]: EC returned error result code 7
Sep 30 16:46:55 gframe python3[1154504]: EC response reserved != 0
Sep 30 17:02:09 gframe python3[1162689]: Missing Chromium EC memory map.
Sep 30 17:02:09 gframe python3[1162689]: Cannot find I2C adapter
Sep 30 17:02:09 gframe python3[1162689]: Unable to establish host communication
Sep 30 17:02:09 gframe python3[1162689]: Couldn't find EC
Sep 30 17:23:09 gframe python3[1173005]: EC returned error result code 7
Sep 30 18:14:11 gframe python3[1193186]: Missing Chromium EC memory map.
Sep 30 18:14:11 gframe python3[1193186]: Cannot find I2C adapter
Sep 30 18:14:11 gframe python3[1193186]: Unable to establish host communication
Sep 30 18:14:11 gframe python3[1193186]: Couldn't find EC
Sep 30 19:41:33 gframe python3[1224615]: EC response reserved != 0
Sep 30 19:41:33 gframe python3[1224615]: EC returned error result code 7
Sep 30 19:45:59 gframe python3[1225688]: EC response version mismatch
Sep 30 19:45:59 gframe python3[1225688]: EC returned error result code 12
Sep 30 19:45:59 gframe python3[1225688]: EC returned error result code 1
Oct 01 16:58:59 gframe python3[1385517]: EC response reserved != 0
Oct 01 17:40:48 gframe python3[1409681]: EC response reserved != 0
Oct 01 18:12:20 gframe python3[1417193]: EC returned error result code 7
Oct 01 18:12:20 gframe python3[1417193]: EC returned error result code 1
Oct 01 18:18:08 gframe python3[1418430]: EC response reserved != 0
Oct 01 18:18:08 gframe python3[1418430]: EC returned error result code 7
Oct 01 18:23:10 gframe python3[1419717]: EC response reserved != 0
Oct 01 18:23:10 gframe python3[1419717]: EC returned error result code 7
Oct 01 19:51:12 gframe python3[1434358]: EC returned error result code 12
Oct 01 20:34:12 gframe python3[1441772]: EC returned error result code 7
Oct 01 21:06:12 gframe python3[1447207]: EC response reserved != 0
Oct 01 22:14:00 gframe python3[1462609]: EC returned error result code 7
Oct 01 22:14:00 gframe python3[1462609]: EC returned error result code 12
Oct 01 23:25:24 gframe python3[1474541]: EC response has invalid checksum
Oct 02 00:30:50 gframe python3[1621628]: EC response has invalid checksum
Oct 02 00:30:50 gframe python3[1621628]: EC returned error result code 7
Oct 02 02:50:58 gframe python3[2534277]: EC response reserved != 0
Oct 02 05:38:14 gframe python3[2576837]: EC response reserved != 0
Oct 02 05:57:24 gframe python3[2579945]: EC response has invalid checksum
Oct 02 06:49:24 gframe python3[2589184]: EC response version mismatch
Oct 02 07:00:28 gframe python3[2591025]: EC response reserved != 0
Oct 02 07:17:50 gframe python3[2593827]: EC response has invalid checksum
Oct 02 07:47:48 gframe python3[2598590]: Missing Chromium EC memory map.
Oct 02 07:47:48 gframe python3[2598590]: Cannot find I2C adapter
Oct 02 07:47:48 gframe python3[2598590]: Unable to establish host communication
Oct 02 07:47:48 gframe python3[2598590]: Couldn't find EC
dmesg output starting at the suspension:
[312001.582152] PM: suspend entry (deep)
[312001.592483] Filesystems sync: 0.010 seconds
[312001.592670] (NULL device *): firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0.pnvm
[312001.592806] (NULL device *): firmware: direct-loading firmware regulatory.db
[312001.592827] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[312001.592965] (NULL device *): firmware: direct-loading firmware intel/ibt-0041-0041.sfi
[312001.593157] (NULL device *): firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0-74.ucode
[312001.594923] (NULL device *): firmware: direct-loading firmware intel/ibt-0041-0041.ddc
[312001.594946] (NULL device *): firmware: direct-loading firmware i915/adlp_dmc.bin
[312001.595209] (NULL device *): firmware: direct-loading firmware i915/adlp_guc_70.bin
[312001.596124] (NULL device *): firmware: direct-loading firmware i915/tgl_huc.bin
[312001.599300] Freezing user space processes
[312001.601389] Freezing user space processes completed (elapsed 0.002 seconds)
[312001.601392] OOM killer disabled.
[312001.601393] Freezing remaining freezable tasks
[312001.602719] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[312001.602759] printk: Suspending console(s) (use no_console_suspend to debug)
[312001.985107] ACPI: EC: interrupt blocked
[312002.013286] ACPI: PM: Preparing to enter system sleep state S3
[312002.027711] ACPI: EC: event blocked
[312002.027712] ACPI: EC: EC stopped
[312002.027712] ACPI: PM: Saving platform NVS memory
[312002.027966] Disabling non-boot CPUs ...
[312002.029237] smpboot: CPU 19 is now offline
[312002.061798] ACPI: PM: Low-level resume complete
[312002.061969] ACPI: EC: EC started
[312002.061971] ACPI: PM: Restoring platform NVS memory
[312002.064740] Enabling non-boot CPUs ...
[312002.064815] smpboot: Booting Node 0 Processor 19 APIC 0x3e
[312002.085876] core: cpu_atom PMU driver: PEBS-via-PT
[312002.085889] ... version: 5
[312002.085892] ... bit width: 48
[312002.085894] ... generic registers: 6
[312002.085896] ... value mask: 0000ffffffffffff
[312002.085898] ... max period: 00007fffffffffff
[312002.085900] ... fixed-purpose events: 3
[312002.085901] ... event mask: 000000070000003f
[312002.086766] CPU19 is up
[312002.087649] ACPI: PM: Waking up from system sleep state S3
[312002.092042] ACPI: EC: interrupt unblocked
[312002.235453] ACPI: EC: event unblocked
[312002.243947] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.5.1
[312002.243951] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
[312002.254246] iwlwifi 0000:aa:00.0: WRT: Invalid buffer destination
[312002.257423] nvme nvme0: Shutdown timeout set to 10 seconds
[312002.258356] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[312002.258887] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
[312002.258888] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
[312002.259516] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
[312002.263766] nvme nvme0: 20/0/0 default/read/poll queues
[312002.417759] iwlwifi 0000:aa:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f
[312002.417779] iwlwifi 0000:aa:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[312002.417792] iwlwifi 0000:aa:00.0: WFPM_AUTH_KEY_0: 0x80
[312002.417803] iwlwifi 0000:aa:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[312002.499587] usb 1-9: reset full-speed USB device number 3 using xhci_hcd
[312005.197185] OOM killer enabled.
[312005.197186] Restarting tasks ...
[312005.197203] pcieport 0000:00:1d.0: PCI bridge to [bus aa]
[312005.197238] pcieport 0000:00:1d.0: bridge window [mem 0x7a200000-0x7a2fffff]
[312005.207472] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[312005.208828] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
[312005.213964] done.
[312005.213970] random: crng reseeded on system resumption
[312005.215338] usb 1-2: USB disconnect, device number 76
[312005.215342] usb 1-2.2: USB disconnect, device number 79
[312005.215403] usb 4-1: USB disconnect, device number 37
[312005.215405] usb 4-1.4: USB disconnect, device number 38
[312005.215430] cdc_ncm 4-1.4:2.0 eth0: unregister 'cdc_ncm' usb-0000:00:0d.0-1.4, CDC NCM (NO ZLP)
[312005.261320] PM: suspend exit
[312005.275451] smpboot: Booting Node 0 Processor 1 APIC 0x1
[312005.411897] usb 1-2.3: USB disconnect, device number 78
[312005.494873] smpboot: Booting Node 0 Processor 2 APIC 0x8
[312006.051414] usb 1-4: USB disconnect, device number 59
[312006.195305] usb 1-5: USB disconnect, device number 60
[312006.703678] smpboot: Booting Node 0 Processor 3 APIC 0x9
[312006.999304] smpboot: Booting Node 0 Processor 4 APIC 0x10
[312007.068159] iwlwifi 0000:aa:00.0: WRT: Invalid buffer destination
[312007.155824] smpboot: Booting Node 0 Processor 5 APIC 0x11
[312007.231141] iwlwifi 0000:aa:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f
[312007.231188] iwlwifi 0000:aa:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[312007.231205] iwlwifi 0000:aa:00.0: WFPM_AUTH_KEY_0: 0x80
[312007.231218] iwlwifi 0000:aa:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[312007.411422] smpboot: Booting Node 0 Processor 6 APIC 0x18
[312007.639698] smpboot: Booting Node 0 Processor 7 APIC 0x19
[312007.819266] smpboot: Booting Node 0 Processor 8 APIC 0x20
[312008.019275] smpboot: Booting Node 0 Processor 9 APIC 0x21
[312008.191317] smpboot: Booting Node 0 Processor 10 APIC 0x28
[312008.379282] smpboot: Booting Node 0 Processor 11 APIC 0x29
[312008.515284] smpboot: Booting Node 0 Processor 12 APIC 0x30
[312008.827300] smpboot: Booting Node 0 Processor 13 APIC 0x32
[312009.055303] smpboot: Booting Node 0 Processor 14 APIC 0x34
[312009.215606] usb 1-9: reset full-speed USB device number 3 using xhci_hcd
[312009.283353] smpboot: Booting Node 0 Processor 15 APIC 0x36
[312009.523301] smpboot: Booting Node 0 Processor 16 APIC 0x38
[312009.811377] smpboot: Booting Node 0 Processor 17 APIC 0x3a
[312010.099419] smpboot: Booting Node 0 Processor 18 APIC 0x3c
[312010.171593] usb 1-9: reset full-speed USB device number 3 using xhci_hcd
[312010.703728] wlan0: authenticate with 34:fc:b9:06:ae:d2
[312010.714879] wlan0: send auth to 34:fc:b9:06:ae:d2 (try 1/3)
[312010.769746] wlan0: authenticated
[312010.771348] wlan0: associate with 34:fc:b9:06:ae:d2 (try 1/3)
[312010.773079] wlan0: RX AssocResp from 34:fc:b9:06:ae:d2 (capab=0x1411 status=0 aid=47)
[312010.807944] wlan0: associated
[312010.807999] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 34:fc:b9:06:ae:d2
[312026.698034] filter_write: 35 callbacks suppressed
[312026.698040] msr: Write to unrecognized MSR 0x38f by i7z (pid: 1216462).
[312026.698048] msr: See https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about for details.
[312060.200578] filter_write: 83 callbacks suppressed
[312060.200580] msr: Write to unrecognized MSR 0x38f by i7z (pid: 1216462).
[312060.200583] msr: See https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about for details.
[312093.978058] filter_write: 83 callbacks suppressed
[312093.978060] msr: Write to unrecognized MSR 0x38f by i7z (pid: 1216462).
[312093.978062] msr: See https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about for details.
[312127.779405] filter_write: 83 callbacks suppressed
[312127.779408] msr: Write to unrecognized MSR 0x38f by i7z (pid: 1216462).
[312127.779412] msr: See https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about for details.
Also attached is the file output for perf record on the process. I'm not totally sure if this would be helpful but it might be a good datapoint.
perf.data.tar.gz
from fw-fanctrl.
leopoldhub
commented on August 10, 2024
Hi @gidoBOSSftw5731 ,
We recently did a consequent refactoring of our codebase, is this issue still present in the latest version?
from fw-fanctrl.
leopoldhub
commented on August 10, 2024
Hi @gidoBOSSftw5731 ,
Since you did not reply, I assume that the buggy behaviour has been fixed with the latest version.
I will, close this issue, if the bug is still there, feel free to reopen it.
Have a nice day
from fw-fanctrl.
Related Issues (20)
- Error running after fresh install (config not found) HOT 14
- Cannot open lockfile error HOT 2
- Issues with suspend-then-hibernate due to script in /usr/lib/systemd/system-sleep/ HOT 6
- Can't get value of subfeature curr1_input: Can't read HOT 6
- Unable to establish host communication HOT 9
- Nix package HOT 4
- [Feature] Support for Framework 16 HOT 19
- [Feature] Support for AMD Framework 13 HOT 2
- [Question] about the ec tool project and the right version to use HOT 2
- ectool and windows support HOT 2
- Command argument refactoring proposition HOT 4
- Usage of pipfile for requirements.txt replacement HOT 4
- Reading the temperature from the wrong sensor HOT 4
- FileNotFoundError: [Errno 2] No such file or directory on latest commit HOT 13
- No binary embedding HOT 3
- install.sh attempts to stop service during packaging HOT 1
- [BUG] [packaging/AUR] Sleep hook causes 90-second hang on startup / resume from sleep HOT 3
- Is there a way to fully disable this tool and resort to the default fan control? HOT 6
- [BUG] What's going on here? Laptop showed 0 battery power and then shutoff HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from fw-fanctrl.