This repository contains software and other files supporting PiModules(R) UPS PIco HV3.0A.
- Enable
i2c
, setuppi
user password, use proper timezone & wifi locale viasudo raspi-config
- SSH into your raspberry pi with UPS pico installed.
- Run
(cd ./shell_scripts/ && ./setup_dependencies.sh)
to update RPI os, install prerequisite software, etc - Run
(cd ./shell_scripts/ && ./setup_pico.sh)
to config RPI serial port, i2c on system, hardware RTC, etc - Run
(cd ./shell_scripts/ && ./firmware_update_pre.sh)
to prep system for firmware update - Run
(cd ./shell_scripts/ && ./firmware_update_main.sh)
to update firmware - Run
(cd ./shell_scripts/ && ./firmware_update_post.sh)
to revert system
- run
(cd ./pico_status/ && sudo python ./pico_status.py)
- Script to show you some statistics pulled from your UPS PIco HV3.0A. - run
(cd ./temp_fan/ && sudo python ./pico_HV3.0_temp_fan_v1.0.py)
- Script to automatically change the fan speed based on the temperature of the TO92 sensor.
- Please visit manual in
./doc
to find troubleshooting steps