Getting a Kernel Panic using the entire OC Folder provided here. (Only change I did was change ShowPicker=true in config.plist.

Config -
Dell G3 3579
Full size HDMI port (Not Type-C)
Intel Core i5-8300H @ 2.30Ghz
12GB DDR4 2667Mhz (8 + 4)
Samsung EVO 970 Pro 512GB NVME SSD (Windows 10 + Existing MacOS 10.15.4 Previously Working fully with Clover)
Samsung 850 EVO 128GB SATA SSD (Storage)
Intel UHD Graphics 630 + NVIDIA GeForce GTX 1050 4GB
Realtek ALC236
Realtek RTL8111
Intel Wireless-AC 9462

EFI (With OC folder) on USB -
EFI.zip

Intel Wireless-AC 9462 is the original computer network card. I haven't changed this device.

What is working (the first) is an external usb wireless network card.

Installing Catalina on the Dell G3 3579 (8300H, 1050) was flawless. But High Sierra had issues. Kexts did not seem to load (UHD 630 has 7mb VRAM, airportitlwm not working, etc. I think this was a kernel panic but I'm not so sure).

I did this process to download High Sierra on the MacBookPro 15,1 SMBIOS: I moved the SSD to a real MacBook Pro and then downloaded High Sierra there. The SSD was then moved to the Dell. I used your EFI with -no_compat_check.

What should I do/try now?

Edit: Also, which SSDT should I modify to use dGPU in 10.13.6?

After trying to wakeup by pressing power button, the screen was still black. But peripheral devices seemed to get power, as the light of my usb mouse turned on.

Apple diagnosis file is attached below.

Sleep Wake Failure_2020-11-30-g3-3579.txt

我Dell_G3579 8代i5
使用你老版的boot+新的oc引导时出现windows start failed .... firmware..的
导致无法引导，之类的情况，可能是bios没有设置好，clover引导正常
求大神提供完整的文件，或者求大神写一篇博客 ，oc引导过程，小白求教

在mac中，点了关机。屏幕是黑了，但是键盘灯没有熄灭，同时风扇仍然在工作。

I can't even boot to my desktop after updating to version 4.0 with OpenCore 0.6.1
Any solution?

我用OC引导就蓝屏。还有就是网卡换成DW1820A要用蓝牙的话，这里的USBPorts有点问题导致蓝牙驱动识别不了，因为DW1820A的蓝牙是接在USB上的，之前一直用的Clover，为了升级10.15换成了你的OC，把USB换成以前Clover里的蓝牙就正常了。。

首先非常感谢您做的这些工作，您的efi是我目前知道本机型最好的！😄不过在使用过程中依然遇到了一些小问题，可以参考一下

1. 休眠后有几率蓝牙无法工作
2. 引导菜单中的的win选项大部分时间无法正常启动，偶尔几次可以
3. 设置中的修改修饰键功能经常不起作用，有时却玄学的可以生效
4. 点击大写锁定键后大写指示灯常亮，无法关闭，这好像是使用了您在另一个issue中推荐的修改键盘映射的工具后才有的问题，之后卸载也无效
5. 蓝牙连接airpods后调节音频输出设备的界面会卡住无法调节，不过其他一切功能工作的都很正常

这些问题基本都不影响使用，有的和您应该也没有关系，所以不用很放在心上，在之后的更新中如果有机会的话可以顺便修复，或者可以告诉我解决的方法，我会尽我所能去做。最后再次感谢您做出的贡献，这是我第一次写issue，不有冒犯请见谅

我更换了1820A，现在是10.15.6，蓝牙不工作，所以我参考了小兵给1820A修复蓝牙的教程，可是教程走完后，无法引导系统，卡在多段oc开头的代码。我把config.plist换回您原本的就正常开机，请问下这该怎么解决？？

Hi, I found a forum thread that talks about Nvidia Webdriver working on Catalina (https://amd-osx.com/forum/viewtopic.php?t=9332). So, is it possible to use the same method to activate the HDMI output?

我现在系统是10.14.2 是用Clover引导的，想升级系统到10.15.4。

使用你最新release的oc安装完成之后，开机风扇一直转是什么问题呢，网上说时cpu一直不能变频，使用你27号修改的能解决这个问题吗

我在文件里添加三个驱动文件，并config里加了配置，却无法引导，卡在苹果标志界面

由衷感谢，希望你能做得更好。

The patch is as seen on https://github.com/xzhih/one-key-hidpi

G3-3579 has an 15.6" 1080p screen, on which the default font and ui seems unpleasantly small, but choosing lower resolution in system settings makes everything fuzzy. Merging this patch may help with the problem.

I have successfully installed Mojave. However, the battery life on Win 10 would be around 6 hours. On Mojave, it's around 2.5 hours. Is the power management for the build fixed? Brother, how can I do it? I'm new to this stuff and would love to learn.

Sorry to bother you again. My laptop isn't G3 but MSI GF63 8RC. These two laptop have nearly same hardware. For now, it works perfectly on my laptop. Could I reduce the amount of DSDT or If I need to get my laptop's DSDT and add them to config.plist?
Thanks!

10.14更换此oc后正常引导，准备升级最新版，安装网卡 蓝牙驱动。很给力！

带type-c的那个版本，i7的

I have g3 3579 i5 with 1050
How can I use it for install macos?
Can you guide me?

My phone is

启动时遇到错误，该怎么解决

HDMI接外置显示器 无法正常工作

wireless adapter: Intel Wireless-AC 9462 (comes with G3-3579)
driver: itlwm: 1.1.0 (comes with release v4.3 of this repository)

problem: when switching from one wifi network to another, DHCP won't get ip automatically for a long period of time, thus the network won't work (though network was connected successfully). I have to renew DHCP manually to make the newly connected network function properly.

Hey man, can you help me with installation?

I have the MacOs Catalina img but dunno how to put this files there

我保留了原有的windows 10在ssd中，我把OC拷到SSD的ESP中，设置OC引导，bios一直无法识别引导，提示无boot。我用机械硬盘装的Mac. 设置机械硬盘的OC引导又无法识别SSD中的windows. 请问有什么办法能解决吗。

你好，我笔记本是g3 i7 8750h版的，用别人的i7版的efi的不能使用，用你的opencore版的可以完美引导，刚换了dw1820a，蓝牙无信息，识别不到，想问下你的acpi是否有为了适配ac9462而改动，导致别的蓝牙型号无法使用，谢谢

Hi Tony

I have downloaded the OLARILA catalina raw file and used balenaetcher to write to USB drive. after writing to USB i tried to boot from USB drive but it did not boot.

Also I placed the /OC folder into my Windows EFI partition too. but nothing worked out..

I have tried to use Catalina which I download from Niresh Catalina version and I replaced the OC into EFI partition of the USB disk

is it fine to use that Niresh Catalina version or else which one to use

Please share the Mac OS DMG link

can I make dual boot with existing Windows10 came with DELL G3 3579. I have 512 GB SSD harddrive wanted to make dual boot along with Windows10 and Mac 11

is there any video tutorial for making it success

Whenever I install/upgrade the macos catalina to big sur stable i get a message after installing and during boot "your computer restarted because of a problem" and is stuck in loop

更新到Big Sur 11.1时
更新过程以及更新后开机 都会长时间(几分钟)卡在苹果logo界面
(长时间等待后仍可进入系统正常使用，但影响体验)

My model of the 3579 does not have the 512GB SSD, only the 1TB HDD. Will it still work as a hackintosh? Or should I stick to Ubuntu Kylin for the time being?

Dear Tony, are you used IntelWifi (native with AirPortitlwm) airdrop airport handoff?

（尽管我的问题很wake）感觉我看了那么多教程都是直接把efi文件夹复制进U盘efi分区。然后看了上面的issues你讲每个电脑的boot都不一样。那要怎么得到这个boot文件夹呢？

首先感谢你为3579做的efi
其次有个问题请教一下，当efi在u盘里的时候，itlwm可以正常用。
我把efi放到自己的固态里，网卡驱动不加载。
请问有解决办法吗？

https://gitee.com/shuiyunxc/OpenCore/releases
OC0.6.0

我用你的OC引导安装了10.13.6系统，因为我的网卡是DW1820A，所以我在config.plist里删除了关于Intel网卡的驱动，添加了博通网卡驱动。进系统后，网卡没有问题，但是声卡却检测不出来，在hackintool里能看到声卡的pci地址，但在音频里看不到。我看你的layout-ID设的是15对吧，我改成11也没用，怎么办

黑果小兵里面的bios里面要关闭和开启的东西，我再dell的bios里面一个也找不到，那么要进行配置吗

My dear friend
I just started learning hackintosh . The first installation was successful some time ago. Clover was used at that time. At that time, there was a shutdown problem. However, I made a big mistake in the process of solving the problem, which led to the failure to boot Mac OS when using clover. I have no idea. So I tried your OC EFI to boot. I finally succeeded! Thank you very much! However, it still can't be turned off at present. After the shutdown, the fan still works. The same is true of hibernation mode, and it doesn't wake up the computer. Don't know what's the reason, drive? BIOS？But，no matter what method I use, including changing the boot mode, I can't solve this problem。I really have no way. I want to ask you for help.I really hope you can reply me.My computer is the same as yours. My BIOS is the latest version.

因为一些原因我的网卡换成了ax200，我发现一直驱动不了蓝牙，我的设置里甚至连蓝牙图标都无。
我尝试自己换了IntelBluetoothFirmware.kext和IntelBluetoothInjector.kext也是同样情况。

我的是双系统macos10.14.2和win10，下载的0.5.7版本的OC，解压后把EFI下的OC整个目录替换成你提供的OC目录，然后将整个EFI替换掉之前的clover版的EFI分区，重启后俩系统都进不去了

i feel the delay when choose OS

Are there any additional step after I upgrade my RAM from 8GB to 12GB (8+4)?

在gibmacos写入u盘的镜像，加入了佬哥您的oc文件，和imacos下载的oc最新boot，改了ShowPicker，bios中的设置按照黑果小兵上的修改，但是开机还是出错，不知道是哪里的问题了，希望佬哥能帮帮忙解决一下。我的笔记本配置和你的是一样的

请问我该如何修改引导文件才能使用雷电接口呢？添加了IOElectrity驱动试了一下，但是没有变化。无法使用雷电接口，仅可以给外接设备充电，不能传输数据。

Hey, how do you set the keys to adjust the screen brightness on a laptop keyboard ?? Right now it's fn + f12 and fn + key pause. My bootloader is opencore. In my laptop acer v3-371, the shortcut from adjusting the screen brightness on the keyboard is the shortcut fn + left arrow key and fn + arrow right key.

你好，我的是G3 带type-C版本，网上找了很多EFI都不能使用type-C 转hdmi外接显示器，大佬能否给出个适配Type-C的版本(支持外接显示器)