SHT30 Humidity and Temperature Sensor

The SHT30 is a Humidity and Temperature Sensor.

This Device is available from ControlEverything.com [SKU: SHT30_I2CS]

https://www.controleverything.com/content/Temperature?sku=SHT30_I2CS

This Sample code can be used with Raspberry Pi, Arduino, Particle Photon, Beaglebone Black and Onion Omega.

Download and install pi4j library on Raspberry pi. Steps to install pi4j are provided at:

http://pi4j.com/install.html

Download (or git pull) the code in pi.

Compile the java program.

$> pi4j SHT30.java

Run the java program.

$> pi4j SHT30

Download and install smbus library on Raspberry pi. Steps to install smbus are provided at:

https://pypi.python.org/pypi/smbus-cffi/0.5.1

Download (or git pull) the code in pi. Run the program.

$> python SHT30.py

Download and install Arduino Software (IDE) on your machine. Steps to install Arduino are provided at:

https://www.arduino.cc/en/Main/Software

Download (or git pull) the code and double click the file to run the program.

Compile and upload the code on Arduino IDE and see the output on Serial Monitor.

Login to your Photon and setup your device according to steps provided at:

https://docs.particle.io/guide/getting-started/connect/photon/

Download (or git pull) the code. Go to online IDE and copy the code.

https://build.particle.io/build/

Verify and flash the code on your Photon. Code output is shown in logs at dashboard:

https://dashboard.particle.io/user/logs

Download (or git pull) the code in Beaglebone Black.

Compile the c program.

$>gcc SHT30.c -o SHT30

Run the c program.

$>./SHT30

Get Started and setting up the Onion Omega according to steps provided at :

https://wiki.onion.io/Get-Started

To install the Python module, run the following commands:

opkg update

opkg install python-light pyOnionI2C

Download (or git pull) the code in Onion Omega. Run the program.

$> python SHT30.py

#####The code output is the relative humidity in %RH and temperature reading in degree celsius and fahrenheit.