topquark22 / thermo55 Goto Github PK

Found in: Branch V3

Expected behaviour:
Always-on display switch is actively-read and takes effect during the loop. It keeps the display on if engaged. If not engaged, the display is deactivated after the timeout period .

Actual behaviour:
Always-on display takes effect after the display is activated. It doesn't ever turn off the display even if the switch is disengaged.

• Implement a 2nd POT for fine threshold adjustment
• Coarse POT has range -100 - 300 degrees
• Fine POT has range +/- 40 degrees added to coarse POT resding

Problem: There are no analog pins remaining in the parallel_interface configuration, so this will only be possible in the I2C configuration.