uffejakobsen / nibtools Goto Github PK
View Code? Open in Web Editor NEWThis project forked from opencbm/nibtools
git mirror of nibtools (https://c64preservation.com/dp.php?pg=nibtools)
This project forked from opencbm/nibtools
git mirror of nibtools (https://c64preservation.com/dp.php?pg=nibtools)
README.TXT for the NIBTOOLS utilities (Updated 2/16/2014) homepage: https://c64preservation.com/dp.php?pg=nibtools NIBTOOLS is copyrighted (C) 2005 Pete Rittwage It is originally based on MNIB which is copyrighted (C) 2000 Markus Brenner In addition, NIBTOOLS at least contains code and/or bug fixes contributed by: - Wolfgang Moser - Spiro Trikaliotis - Nate Lawson - Arnd Menge ======================================== = Introduction = ======================================== NIBTOOLS is a disk transfer program designed for imaging original disks and converting into the G64 and D64 disk image formats. These disk images may be used on C64 emulators like VICE or CCS64 [2,3] and in many cases can be transferred back to real disks. REQUIREMENTS: - Commodore Disk Drive model 1541, 1541-II or 1571, modified to support the parallel XP1541 or XP1571 interface [1] - XP1541 or XP1571 cable * AND * - XE1541, XA1541, or XM1541 cable [1] * OR * - XEP1541, XAP1541, or XMP1541 combination cable [1] * OR * - XUM1541 (ZoomFloppy) with a 1541+Parallel cable, OR a 1571 with no parallel cable needed. - Windows XP/Vista/Windows 7/Windows 10; x64 or x86 Editions, with OpenCBM 0.4.2 or higher Linux with OpenCBM 0.4.0 or higher, MS/DR/Caldera DOS and cwsdpmi.exe software (no longer tested but still compiles with DJGPP for old <=P3 hardware) ======================================== = Usage = ======================================== Reading real disks into disk images: 1) connect 1541/71 drive to your PC's parallel port(s), using the XE1541/XA1541 and the XP1541/71 cables, XEP/XAP/XMP combo cable, or ZoomFloppy. 2) insert disk into drive and start NIBTOOLS: nibread [options] filename.nib 3) use nibconv to convert between different formats: nibconv filename.nib filename.g64 nibconv filename.nib filename.d64 nibconv filename.nbz filename.g64 nibconv filename.nbz filename.d64 nibconv filename.d64 filename.g64 nibconv filename.g64 filename.d64 Writing back disk images to a real disk: 1) connect 1541/71 drive to your PC's parallel port(s), using the XE1541/XA1541 and the XP1541/71 cables, or XEP/XAP/XMP combo cable, or ZoomFloppy. 2) insert destination disk into drive and start NIBTOOLS: nibwrite filename.nib nibwrite filename.nbz nibwrite filename.g64 nibwrite filename.d64 ======================================== = Tips and Tricks = ======================================== Please support us! ------------------ For further development of NIBTOOLS it is *vital* that we get feedback from you, the users! Please send me reports about your usage of NIBTOOLS. We want to know about problems, as well as success and failures to convert Original disks to G64/D64 images. If you own a stack of original disks and plan to convert them using NIBTOOLS, PLEASE DROP ME A MAIL - we would love to get and analyze your NIB images, working as well as non-working, to improve NIBTOOLS's success rate for future versions. If you send us your NIB images I will gladly add your name to the Thank You! list at the end of this document :-) Success Rate on Originals ------------------------- Currently, I estimate NIBTOOLS's 'success rate' on successfully copying copy protected games into working G64 images at about 99%. Writing back to disks using the same hardware has less success, since copy protection was designed to take advantage of the fact that you cannot write everything you can read with any disk drive. Still, you can write back the large majority of software successsully. The following table gives an overview over protection schemes and NIBTOOLS's chances on copying them: Copy Protection D64 G64 Used by Read Errors X X years ca. 1983-1985 Tracks 35-40 X X Firebird, Para Protect Half Tracks X Big Five (Bounty Bob Strikes Back), System 3 Wide/Fat Tracks X early EA, Activision, XEMAG Long/Custom Tracks X Datasoft, Mindscape Slowed down motor X V-MAX!, Later Vorpal Sync counting/anomalies X Epyx (early Vorpal) Nonstandard bitrates X V-MAX!, Rapidlok Bitrate changes in track X Software Toolworks (Chessmaster 2100, etc.) NO sync marks X later EA (Pirateslayer) ALL sync marks (killer) X Br0derbund, various track/sector synchronization X Rapidlok, various 00 Bytes X Rapidlok, Datasoft, Rainbow Arts Not all of these may run on the current emulators. Disk emulation still isn't perfect, especially some of the more tricky protections (sector synchronization, Bitrate changes, bad GCR) are not yet fully implemented by all current emulators. --- usage: nibread/nibwrite [options] filename (some options are for reading only, some are for writing only, some are for both) -D[n] : Drive # (default 8) -S[n] : Starting Track (default 1) -E[n] : Ending Track (default 41) -P : Force to use parallel instead of SRQ on 1571 drive -T : Track skew in microseconds - Some protections depend on data being perfectly aligned from track to track. Some depend on them being skewed a specific amount from each other. You can use this feature to reproduce this if you know the skew. There is a tool to determine the skew of original disks in OpenCBM called rpm1541. -t : Timer-based track alignment. Used to simulate track to track alignment using tightly controlled delays. It can be accurate to 10ms or so on a stable drive, nearly useless on others. -u[n] : Unformat disk for [n] passes (removes *ALL* data) This option alternates writing all sync, then all $00 bytes (bad GCR) to the entire disk surface, simulating the state of a brand new never-formatted disk. -l : Limit functions to 40 tracks (R/W) Some disk drives will not function past track 41 and will click and jam the heads too far forward. The drive cover must then be removed and the head pushed back manually. If this happens to you, use this option with every operation. There are only a few disks which utilize track 41 for protection. -h : Toggle halftracks (R/W) This option will step the drive heads 1/2 track at a time during disk operations instead of a full track. This protection is only very rarely used. I have only found 2 disks out of thousands. Bounty Bob Strikes Back is one. -k : Disable reading 'killer' tracks (R) Some drives will timeout when trying to read tracks that consist of all sync. If you cannot read a disk because of timeouts, use this option. -r[n] : Disable or modify 'reduce syncs' option (R) By default, NIBTOOLS will "compress" a track when writing back out to a disk if the track is longer than what your drive can write at any given density (due to drive motor speed). Some protections count sync lengths so the protection might fail with this option. For 99% of disks, it is fine and is the default setting. * You can now specify a minimum sync length to leave behind in bytes using [n] -F[n] : Creates a "FAT" track in the output image when used with nibconv, on track [n]+0.5,[n]+1. When used without [n] it will attempt to detect a FAT track by comparing GCR data. Most fat tracks are autodetected, but not all. -g : Enable 'reduce gaps' option (R) This option is another form of "compression" used when writing out a disk. "gaps" are inert data placed right before a sync mark that can usually be safely removed, but it's possible to remove too much and damage data, so this is off by default. If NIBTOOLS is truncating tracks and they still won't load, you can try this option to squeeze a bit more onto the track. -0 : Enable 'reduce bad GCR' option (R) This option is another form of "compression" used when writing out a disk. "Bad GCR" (when not used for copy protection) is unformatted or corrupted data that can usually be safely removed. It is not on by default, but if NIBTOOLS is truncating tracks and they still won't load, you can try this option to squeeze a bit more onto the track. -f[n] : Modify the "fixing" of bad GCR (W) - "Bad GCR" is either corrupted (or illegal) GCR that are either intentionally placed on a disk for protection, or are simply unformatted data on the disk. NIBTOOLS will by default write 0x01 bytes to the disk to simulate this. Some protections check this data to see that it is unformatted (semi-random values). This option can be disabled if the program is using illegal GCR as part of regular data, such as some V-MAX track 20 loaders. * You can now specify an aggression level as [n] 0 = do not repair detected bad GCR 1 = kill only completely bad GCR bytes (default if no level specified) (after one bad byte has already passed) 2 = kill completely bad GCR bytes and "mask out" the bad GCR in bytes preceding and following them (after one bad one has already passed) 3 = kill bad GCR bytes as well as the bytes preceding and following them (even if this is the first bad GCR byte encountered) -c : Disable automatic capacity adjustments. By default NIBTOOLS measures the speed of your drive and makes adjustments to the data (compression) based on that speed. If your drive is exactly 300rpm or the tracks you are writing are standard (D64), you can bypass this and save a few seconds. -aX : Alternative track alignments (W) There are several different ways to align tracks when writing them back. By default, NIBTOOLS will do it's best to figure out how the original disk was aligned by analyzing the track data. To force other methods, use this option. -aw: Align all tracks to the longest run of unformatted data. -ag: Align all tracks to the longest gap between sectors. -a0: Align all tracks to sector 0. -as: Align all tracks to the longest sync mark. -aa: Align all tracks to the longest run of any one byte (autogap). -an: Align all tracks to the raw data as found (not normally used). -eX : Extended read retries (R) This is used on deteriorated disks to increase the number of read attempts to get a track with no errors. Use any numerical value, but if it's too high it could take a while to read the disk. Default is 10. -pX : Custom protection handlers (W) This is used to set some flags to handle copy protections which don't remaster with default settings. -px: Used for V-MAX disks to remaster track 20 properly. -pg: Used for GMA/Securispeed disks to remaster track 38/39 properly. -pm: Used for older Rainbow Arts/Magic Bytes to remaster track 36 properly -pr: Used for Rapidlok disks to help remaster them properly (limited success without patches). -pv: Used for newer Vorpal disks, which must be custom aligned when remastered. -G[n] : Match track gap by [n] bytes. By default the pattern matching looks for repeating patterns of 7 (56 bits) bytes to find the gaps. You can adjust this if you are getting too small track length detection (or too large). -d : Force default densities. By default NIBTOOLS tries to detect the density of the written data. If you're sure the disk is standard, you can use this to bypass the checks and save time. This is useful because sometimes badly damaged tracks can detect at the wrong density. -v : Verbose. Output more detailed data to console. Specify multiple times (-v -v) for more info. -V : Enable raw track matching. This is a raw read verification -I : (When used with nibread) Interactive mode. This allows for reading many disks in one sitting without having to initialize the disk drive every time. Imaging a disk in this way takes about 8 seconds for a full 41 tracks. -I : (When used with nibconv, nibwrite) "Fix" too short syncs. Sometimes when reading, we detect a short sync (9 bits instead of 10) and the 1541 can't find the headers when written back out. This will correct that, at the cost of making the track slightly longer. -i : Utilize index hole sensor on the 1571 drive, or the "Super-Card+" index hole circuit in any drive. This works for read/write on side 1 *ONLY*. It will lock up if you try to do this on the flipside of a disk, because it will never see the index hole. This also does not work in SRQ mode. -b[x] : Force custom "fill" byte to use for overlap and filling empty space. Default is 0x55, which is normally "inert" and doesn't interfere with the data stream. Will accept '0' for "bad" GCR, "5" for 0x55 (inert data), "F" for sync, or "?" to repeat the last byte found before the track loops. -C[n] : Simulate a certain track capacity (given [n] as motor RPM, default 300) used when converting to G64. You can use this to see what happens when creating a G64 with regards to compression/truncation that happens when writing to a real disk with a motor at that RPM. Accepts any number, but only numbers around 300 make much sense to try. The max a G64 track can be is 7928 bytes (in VICE) and you'll get a damaged track if you go less than about 290, due to data truncation. Why Does it Bump? ----------------- At the beginning of each disk transfer NIBTOOLS issues a 'bump' command. This is necessary to guarantee an optimal track adjustment of the read head. As NIBTOOLS can't rely on sector checksums, there's no other way on adjusting the head-to-track alignment but bumping. Sorry! ======================================== = References = ======================================== The latest version of this program is available on http://c64preservation.com/nibtools [1] Circuit-diagrams and order form for the adaptor and cables http://sta.c64.org/cables.html (diagrams and shop for X-cables) http://sta.c64.org/xe1541.html (XE1541 cable) http://sta.c64.org/xa1541.html (XA1541 cable) http://sta.c64.org/xp1541.html (XP1541/71 cables) [2] CCS64 homepage http://www.computerbrains.com/ccs64/ [3] VICE homepage http://viceteam.org/ "Thank you!" to all people who helped me out with information and testing - Andreas Boose - Joe Forster - Michael Klein - Matt Larsen - Mat Allen (Mayhem) - Chris Link - Jerry Kurtz - H�kan Sundell - Nicolas Welte - Tim Schurman - Joerg Droege - Quader - Jani - LordCrass
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.