ujfuentes / yosys Goto Github PK
View Code? Open in Web Editor NEWThis project forked from yosyshq/yosys
Yosys Open SYnthesis Suite
Home Page: http://www.clifford.at/yosys/
This project forked from yosyshq/yosys
Yosys Open SYnthesis Suite
Home Page: http://www.clifford.at/yosys/
/-----------------------------------------------------------------------------\ | | | yosys -- Yosys Open SYnthesis Suite | | | | Copyright (C) 2012 - 2016 Clifford Wolf <[email protected]> | | | | Permission to use, copy, modify, and/or distribute this software for any | | purpose with or without fee is hereby granted, provided that the above | | copyright notice and this permission notice appear in all copies. | | | | THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | | WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | | MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | | ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | | WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | | ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | | OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | | | \-----------------------------------------------------------------------------/ yosys -- Yosys Open SYnthesis Suite =================================== This is a framework for RTL synthesis tools. It currently has extensive Verilog-2005 support and provides a basic set of synthesis algorithms for various application domains. Yosys can be adapted to perform any synthesis job by combining the existing passes (algorithms) using synthesis scripts and adding additional passes as needed by extending the yosys C++ code base. Yosys is free software licensed under the ISC license (a GPL compatible license that is similar in terms to the MIT license or the 2-clause BSD license). Web Site ======== More information and documentation can be found on the Yosys web site: http://www.clifford.at/yosys/ Getting Started =============== You need a C++ compiler with C++11 support (up-to-date CLANG or GCC is recommended) and some standard tools such as GNU Flex, GNU Bison, and GNU Make. TCL, readline and libffi are optional (see ENABLE_* settings in Makefile). Xdot (graphviz) is used by the "show" command in yosys to display schematics. For example on Ubuntu Linux 14.04 LTS the following commands will install all prerequisites for building yosys: $ yosys_deps="build-essential clang bison flex libreadline-dev gawk tcl-dev libffi-dev git mercurial graphviz xdot pkg-config python3" $ sudo apt-get install $yosys_deps There are also pre-compiled Yosys binary packages for Ubuntu and Win32 as well as a source distribution for Visual Studio. Visit the Yosys download page for more information: http://www.clifford.at/yosys/download.html To configure the build system to use a specific compiler, use one of $ make config-clang $ make config-gcc For other compilers and build configurations it might be necessary to make some changes to the config section of the Makefile. $ vi Makefile ..or.. $ vi Makefile.conf To build Yosys simply type 'make' in this directory. $ make $ make test $ sudo make install Note that this also downloads, builds and installs ABC (using yosys-abc as executable name). Yosys can be used with the interactive command shell, with synthesis scripts or with command line arguments. Let's perform a simple synthesis job using the interactive command shell: $ ./yosys yosys> the command "help" can be used to print a list of all available commands and "help <command>" to print details on the specified command: yosys> help help reading the design using the Verilog frontend: yosys> read_verilog tests/simple/fiedler-cooley.v writing the design to the console in yosys's internal format: yosys> write_ilang elaborate design hierarchy: yosys> hierarchy convert processes ("always" blocks) to netlist elements and perform some simple optimizations: yosys> proc; opt display design netlist using xdot: yosys> show the same thing using 'gv' as postscript viewer: yosys> show -format ps -viewer gv translating netlist to gate logic and perform some simple optimizations: yosys> techmap; opt write design netlist to a new Verilog file: yosys> write_verilog synth.v a similar synthesis can be performed using yosys command line options only: $ ./yosys -o synth.v -p hierarchy -p proc -p opt \ -p techmap -p opt tests/simple/fiedler-cooley.v or using a simple synthesis script: $ cat synth.ys read_verilog tests/simple/fiedler-cooley.v hierarchy; proc; opt; techmap; opt write_verilog synth.v $ ./yosys synth.ys It is also possible to only have the synthesis commands but not the read/write commands in the synthesis script: $ cat synth.ys hierarchy; proc; opt; techmap; opt $ ./yosys -o synth.v tests/simple/fiedler-cooley.v synth.ys The following very basic synthesis script should work well with all designs: # check design hierarchy hierarchy # translate processes (always blocks) proc; opt # detect and optimize FSM encodings fsm; opt # implement memories (arrays) memory; opt # convert to gate logic techmap; opt If ABC is enabled in the Yosys build configuration and a cell library is given in the liberty file mycells.lib, the following synthesis script will synthesize for the given cell library: # the high-level stuff hierarchy; proc; fsm; opt; memory; opt # mapping to internal cell library techmap; opt # mapping flip-flops to mycells.lib dfflibmap -liberty mycells.lib # mapping logic to mycells.lib abc -liberty mycells.lib # cleanup clean If you do not have a liberty file but want to test this synthesis script, you can use the file examples/cmos/cmos_cells.lib from the yosys sources. Liberty file downloads for and information about free and open ASIC standard cell libraries can be found here: http://www.vlsitechnology.org/html/libraries.html http://www.vlsitechnology.org/synopsys/vsclib013.lib The command "synth" provides a good default synthesis script (see "help synth"). If possible a synthesis script should borrow from "synth". For example: # the high-level stuff hierarchy synth -run coarse # mapping to internal cells techmap; opt -fast dfflibmap -liberty mycells.lib abc -liberty mycells.lib clean Yosys is under construction. A more detailed documentation will follow. Unsupported Verilog-2005 Features ================================= The following Verilog-2005 features are not supported by yosys and there are currently no plans to add support for them: - Non-synthesizable language features as defined in IEC 62142(E):2005 / IEEE Std. 1364.1(E):2002 - The "tri", "triand", "trior", "wand" and "wor" net types - The "config" keyword and library map files - The "disable", "primitive" and "specify" statements - Latched logic (is synthesized as logic with feedback loops) Verilog Attributes and non-standard features ============================================ - The 'full_case' attribute on case statements is supported (also the non-standard "// synopsys full_case" directive) - The 'parallel_case' attribute on case statements is supported (also the non-standard "// synopsys parallel_case" directive) - The "// synopsys translate_off" and "// synopsys translate_on" directives are also supported (but the use of `ifdef .. `endif is strongly recommended instead). - The "nomem2reg" attribute on modules or arrays prohibits the automatic early conversion of arrays to separate registers. This is potentially dangerous. Usually the front-end has good reasons for converting an array to a list of registers. Prohibiting this step will likely result in incorrect synthesis results. - The "mem2reg" attribute on modules or arrays forces the early conversion of arrays to separate registers. - The "nomeminit" attribute on modules or arrays prohibits the creation of initialized memories. This effectively puts "mem2reg" on all memories that are written to in an "initial" block and are not ROMs. - The "nolatches" attribute on modules or always-blocks prohibits the generation of logic-loops for latches. Instead all not explicitly assigned values default to x-bits. This does not affect clocked storage elements such as flip-flops. - The "nosync" attribute on registers prohibits the generation of a storage element. The register itself will always have all bits set to 'x' (undefined). The variable may only be used as blocking assigned temporary variable within an always block. This is mostly used internally by yosys to synthesize Verilog functions and access arrays. - The "onehot" attribute on wires mark them as onehot state register. This is used for example for memory port sharing and set by the fsm_map pass. - The "blackbox" attribute on modules is used to mark empty stub modules that have the same ports as the real thing but do not contain information on the internal configuration. This modules are only used by the synthesis passes to identify input and output ports of cells. The Verilog backend also does not output blackbox modules on default. - The "keep" attribute on cells and wires is used to mark objects that should never be removed by the optimizer. This is used for example for cells that have hidden connections that are not part of the netlist, such as IO pads. Setting the "keep" attribute on a module has the same effect as setting it on all instances of the module. - The "keep_hierarchy" attribute on cells and modules keeps the "flatten" command from flattening the indicated cells and modules. - The "init" attribute on wires is set by the frontend when a register is initialized "FPGA-style" with 'reg foo = val'. It can be used during synthesis to add the necessary reset logic. - The "top" attribute on a module marks this module as the top of the design hierarchy. The "hierarchy" command sets this attribute when called with "-top". Other commands, such as "flatten" and various backends use this attribute to determine the top module. - The "src" attribute is set on cells and wires created by to the string "<hdl-file-name>:<line-number>" by the HDL front-end and is then carried through the synthesis. When entities are combined, a new |-separated string is created that contains all the string from the original entities. - In addition to the (* ... *) attribute syntax, yosys supports the non-standard {* ... *} attribute syntax to set default attributes for everything that comes after the {* ... *} statement. (Reset by adding an empty {* *} statement.) - In module parameter and port declarations, and cell port and parameter lists, a trailing comma is ignored. This simplifies writing verilog code generators a bit in some cases. - Modules can be declared with "module mod_name(...);" (with three dots instead of a list of module ports). With this syntax it is sufficient to simply declare a module port as 'input' or 'output' in the module body. - When defining a macro with `define, all text between triple double quotes is interpreted as macro body, even if it contains unescaped newlines. The tipple double quotes are removed from the macro body. For example: `define MY_MACRO(a, b) """ assign a = 23; assign b = 42; """ - The attribute "via_celltype" can be used to implement a Verilog task or function by instantiating the specified cell type. The value is the name of the cell type to use. For functions the name of the output port can be specified by appending it to the cell type separated by a whitespace. The body of the task or function is unused in this case and can be used to specify a behavioral model of the cell type for simulation. For example: module my_add3(A, B, C, Y); parameter WIDTH = 8; input [WIDTH-1:0] A, B, C; output [WIDTH-1:0] Y; ... endmodule module top; ... (* via_celltype = "my_add3 Y" *) (* via_celltype_defparam_WIDTH = 32 *) function [31:0] add3; input [31:0] A, B, C; begin add3 = A + B + C; end endfunction ... endmodule - A limited subset of DPI-C functions is supported. The plugin mechanism (see "help plugin") can be used load .so files with implementations of DPI-C routines. As a non-standard extension it is possible to specify a plugin alias using the "<alias>:" syntax. for example: module dpitest; import "DPI-C" function foo:round = real my_round (real); parameter real r = my_round(12.345); endmodule $ yosys -p 'plugin -a foo -i /lib/libm.so; read_verilog dpitest.v' - Sized constants (the syntax <size>'s?[bodh]<value>) support constant expressions as <size>. If the expression is not a simple identifier, it must be put in parentheses. Examples: WIDTH'd42, (4+2)'b101010 - The system tasks $finish and $display are supported in initial blocks in and unconditional context (only if/case statements on parameters and constant values). The intended use for this is synthesis-time DRC. Supported features from SystemVerilog ===================================== When read_verilog is called with -sv, it accepts some language features from SystemVerilog: - The "assert" statement from SystemVerilog is supported in its most basic form. In module context: "assert property (<expression>);" and within an always block: "assert(<expression>);". It is transformed to a $assert cell. - The keywords "always_comb", "always_ff" and "always_latch", "logic" and "bit" are supported. Building the documentation ========================== Note that there is no need to build the manual if you just want to read it. Simply download the PDF from http://www.clifford.at/yosys/documentation.html instead. On Ubuntu, texlive needs these packages to be able to build the manual: sudo apt-get install texlive-binaries sudo apt-get install texlive-science # install algorithm2e.sty sudo apt-get install texlive-bibtex-extra # gets multibib.sty sudo apt-get install texlive-fonts-extra # gets skull.sty and dsfont.sty sudo apt-get install texlive-publishers # IEEEtran.cls Also the non-free font luximono should be installed, there is unfortulately no Ubuntu package for this so it should be installed separately using `getnonfreefonts`: wget https://tug.org/fonts/getnonfreefonts/install-getnonfreefonts sudo texlua install-getnonfreefonts # will install to /usr/local by default, can be changed by editing BINDIR at MANDIR at the top of the script getnonfreefonts luximono # installs to /home/user/texmf Then execute, from the root of the repository: make manual Notes: - To run `make manual` you need to have installed yosys with `make install`, otherwise it will fail on finding `kernel/yosys.h` while building `PRESENTATION_Prog`.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.