unep-grid / mapx Goto Github PK

In the list of available countries, after Liberia we should see:
Somalia
South Sudan
Irak

These are the three likely next countries for which we are going to populate data sets
You should also remove "Palestinian territories", Portugal", "Russia", "Japan" and "Jersey" from the top of the list and place them back in alphabetical order

Expected Behavior

When setting up the style, rules should be created according to two different variables (separately): 1 rule for setting up size of points, 1 rule for setting up the color of point. This way, colors and size would depend on two different variables.

Current Behavior

Only one variable can be used for categorical rules. Both colors and size depend on the same values.

Possible Solution

Steps to Reproduce

1. Create a view of a point source layer.
2. Set the style

Detailed Description

This is a suggestion in case this is doable because I don't know if it is complicated to make different rules to interact. I think that it might be very useful for point data.

Expected Behavior

Selecting a point on map where 2 polygons are located should result in both polygons' data being visualized on the pop-up windows.

Current Behavior

Only one polygon's data is shown. Smaller polygons that are totally recovered by others are impossible to be queried.

Possible Solution

This works for point data. I guess the same solution might apply to polygons as well.

Steps to Reproduce

1. Select the view of a polygon data (Mineralized Areas 2011 for example)
2. Go towards the center of AFG and try to select the blue polygon inside the purple one

...

Detailed Description

Steps to Reproduce

1. Create a view with many values to be differentiated

...

Detailed Description

Expected Behavior

Text content of source's metadata should have white lines if they were entered in the metadata.

Current Behavior

When the source's metadata of a view is visualized, all the text fields are formatted in a way that no white lines are present.

Possible Solution

Steps to Reproduce

1. Select a view (i.e. for Afghanistan: Total population per district in 2016-17 (OCHA - 2016))
2. Select Display metadata
3. Check the abstract field i.e.
   ...

Detailed Description

Detailed Description

When you launch the AFG story map, the three buttons in the upper-left corner have wrong tooltips and should be changed to appropriate ones

Expected Behavior

In edit sources, multiple source item should appear.

Current Behavior

Only one source item is visible.

Quick check list

• This isssue is not linked to a dataset
• This issue is not already discussed in another issue
• This issue concerns a bug
• This issue concerns a feature request
• This is VERY URGENT
• You are a coder and could help with code stuff
• This project is awesome

Context

When the layer is deactivated the attributes continue to appear on the map

Expected Behavior

Current Behavior

Possible Solution

Steps to Reproduce

Detailed Description

Current Behavior

Once the language is changed, the title and abstract change the language, but the labels (style view) do not change. Turn off view and turn on to display the legend correctly.

Steps to Reproduce

1. Go to Peru
2. Turn on view “2016 Mining Unites”
3. Change language to Spanish
4. The labels don’t change the language. See image

5. Turn off the view 6. Turn on the view 7. Now the legend is correctly display

Expected Behavior

It should load it

Current Behavior

Right after the drop on the map, an error occurred.
The original file is meant to be in WGS84 (from metadata) but it's coordinate system was actually undefined.
So, after manipulating the file with ArcGis and dragging it in Map-X I got an error that stated something like "the extension of the data is wrong".
With Thomas I tried to define its coord system on QGIS and we still got an error. This time it was just stated to check the console.
As last try, we have saved the file as geojson on QGIS but we still got the same error to be checked in the console.

Steps to Reproduce

1. I attached the geojson with defined coord system. Can you please check what is the error when loading it in @MAP-X?

all_bphs.zip

...

Detailed Description

Expected Behavior

Send biggest circles to the back and bring to the front the smaller circles.

Current Behavior

Using proportional circles - the biggest circles are in front, covering the other circles. See image:

Expected Behavior

To select role, a dropdown menu should appear

Detailed Description

As in the V2, a slide bar to change the opacity of each view individually.
The return of this feature would be great for taking screenshots from MAP-X.

Expected Behavior

Opening twice the same source should trigger the form twice.

Current Behavior

The form does not appear: I have to select another source and switch back to the first one to have the form to show up.

Steps to Reproduce

1. In the tools tab, click edit source, the form of the default source shows up.
2. Close the modal.
3. Open it again : same source, but the form does not shows.
   ...

Current Behavior

This issue concerns the new version -> https://mapx-dev.unepgrid.ch/app/test/
In Tools, the text of the buttons is not displayed.

Expected Behavior

Current Behavior

Impossible to upload layers

Possible Solution

Steps to Reproduce

1. Drag layer
2. Clik on “upload this GeoJSON”

...

Detailed Description

Expected Behavior

Current Behavior

The layer « Armed groups – IPIS » in RDC is not displayed.

Possible Solution

Steps to Reproduce

...

Detailed Description

For the circle, or a simple line, or whatever form, I wonder whether the solution is with the "Animate a line" example of Mapbox GL/JS:

https://www.mapbox.com/mapbox-gl-js/example/animate-a-line/

We could simply circle the area of interest to look at. This could mean doing an ad-hoc addition in the code of the story map, but this is worth it for some our our future key story map.

Expected Behavior

View with layer of type line (rivers, road) should disappear when the view is toggled.

Current Behavior

The layer is not removed when the view is toggled.

Expected Behavior

Display Edit source and Add view buttons

Current Behavior

This two buttons are not display correctly

Possible Solution

Steps to Reproduce

1. Login
2. Go to toolbox

...

Detailed Description

This only happens after login. After refreshing mapx the two buttons are displayed correctly.

Expected Behavior

Current Behavior

Layer Colombie-corruption is not displayed

Possible Solution

Steps to Reproduce

...

Detailed Description

Expected Behavior

The name of the source should change after saving the source meta data

Current Behavior

The title is not updated after the text is updated in form

Steps to Reproduce

1. Edit a source
2. Change the title
3. Save the source

Expected Behavior

Make clearer and intuitive in which language we are working in the view and style form.

Current Behavior

Introduce the legend information in other language is not very intuitive.

Possible Solution

Introduce a bottom in the view and style form to change/switch the language. Or a label/tag that indicates the active language.

Steps to Reproduce

1.Change language
2. Fill view information
3. Fill labels (style information)
4. Change again language to fill the information in other languages
...

Detailed Description

Current Behavior

Unites are specified sometimes on the label and sometimes on the abstract.

Possible Solution

A new field calls “unite” in the view form could standardize where to put the unites.

Current Behavior

The order of the views to activate in the story map editor is counter intuitive.
The view on top of the list is on the bottom in MAP-X.

Possible Solution

Reverse the order of the "views to activate"

Expected Behavior

Current Behavior

The information of the Conflict events layer is not displayed properly. For display information is necessary to zoom in or out but in certain scale, half of the information is not displayed as is shown the image.

Possible Solution

Steps to Reproduce

1. Display layer Conflict events in Afghanistan
2. Zoom out and zoom in

...

Detailed Description

This is the only point type layer in Afghanistan.
In Congo and Colombia the same layer exists but it works properly. Therefore this two layers are less heavy:
3.8 Mo Congo
5.7 Mo Colombia
27.1 Mo Afghanistan

Expected Behavior

When a view is selected for showing on map, the entire set of data should be visualized

Current Behavior

Only a selection of data is visualized if a view is selected after a selection of data was applied through the pop-up window. The issue is that the selection remains active even after unselecting the view and reselecting it afterward. This might be an issue if people select a view and do not remember that they previously selected data through the pop-up window.

Possible Solution

Reload the view entirely every time a view is selected

Steps to Reproduce

1. Select a view which has secondary variables being shown in the pop-up window
2. Select one value from a secondary variable and show the data that have this value
3. Unselect the view
4. Select again that view
   ...

Detailed Description

Expected Behavior

One should be able to read the full name of the type

Expected Behavior

When filling the metadata form, under "Annexes" it might be useful to also have an option for dropping files that are not stored under URLs.

Current Behavior

Only URLs are accepted

Possible Solution

Steps to Reproduce

1. Create a new source.
2. Fill metadata
3. Go to "Annexes"
   ...

Detailed Description

Steps to Reproduce

1. Add a view with a numeric attribute where min == max

Possible Solution

It could be great to have some colour palette in vector tiles style form

Expected Behavior

The text should be in accordance with the source's type.

Current Behavior

Regardless of the type of data uploaded in MAP-X, the text is "Upload this GeoJSON"

Steps to Reproduce

1. Drag and drop a shapefile (in a zip archive)
2. Open the new view in the left panel
3. Move the cursor on the upload button

Detailed Description

It would be interesting to be able to easily add youtube videos in a story map without having to go through the JSON editor. A button to add a youtube link would be a very user friendly solution.

Expected Behavior

We shuold not see the "xxx" country in the country dropdown list

Current Behavior

Possible Solution

Steps to Reproduce

...

Detailed Description

Current Behavior

The titles are not so clear. Could be clearer and standardises if the names are changed for those used in the Geonetwork.

Possible Solution

In the metadata forms change the name of:
“Source” to “Distribution information”
“Sources” to “OnLine resources”

Eventually create a new field call, “Organisation name”. Sometimes the distributor is not the same organisation that created the data.

Expected Behavior

Current Behavior

I cannot login to the platform

Possible Solution

Steps to Reproduce

1. Open login window
2. Enter e-mail
3. I didn't recibe the password in my mail. I tried 5 times
   ...

Detailed Description

Expected Behavior

E.g. Date format are restricted to DD/MM/YYY format. Sometimes, this is not wanted

Possible Solution

Create a comment section to add some complement to explain some specific issue.

This issue concerns the new version -> https://mapx-dev.unepgrid.ch/app/test/

Expected Behavior

When dragged and dropped in MAP-X, a new source should appear in the left panel.

Current Behavior

When dragged and dropped in MAP-X, nothing appears in the left panel. We must move to another country and then go back to the one where the file was dropped to see the new source.

Steps to Reproduce

1. Add a new source (in my case a GeoJSON)
2. Nothing appears in the left panel
3. Move to another country
4. Go back to the country where you dropped the file
5. The new source is displayed in the left panel

Current Behavior

I cannot connect to the PostGIS.

Steps to Reproduce

1. In QGIS > Add a layer PostGIS
2. Refill connection data
3. Test connection

New feature proposal

It would be relevant to add a new set of metadata for each view which contains at least:

• author of the view (full name)
• author affiliation
• author contact (at least an email address)
• creation date
• last modified date

Current state

When we are in MAP-X we have no knowledge of the specific author of each view.
It is therefore difficult to know who to contact if one has a question about a view or even an issue to report to the author.

Possible Solution

Add a new section in the view metadata

Detailed Description

TBD by the MAP-X team

Quick check list

• This isssue is not linked to a dataset
• This issue is not already discussed in another issue
• This issue concerns a bug
• This issue concerns a feature request
• This is VERY URGENT
• You are a coder and could help with code stuff
• This project is awesome

Context

User-friendly issues on edit sources > Select source. Only one layer is displayed on the list with the scroll roll. Should be better if the list of available sources is longer.
Also, the source that is by default doesn’t display the form to edit the source. It’s necessary to search and select one on the list to display the form, even if the layer you want to edit is the one that is by default.

Expected Behavior

Current Behavior

Possible Solution

Steps to Reproduce

Detailed Description

Expected Behavior

if I resize my window, especially on large screen, I want the picture to span the full width, whatever the height of the screen

Current Behavior

It looks OK when the window is small/medium, but on my big Mac screen it does not span full width

Possible Solution

Steps to Reproduce

1. Fist slide of the AFG story mao, with the picture
   2.make your browser window full width, but small height

...

Detailed Description

Expected Behavior

Current Behavior

Once the layer is dragged in MAP-X the information of the layer is displayed on the map, but is not possible to start the uploading of the layer. The loading bar does not appear.

Possible Solution

Steps to Reproduce

1. Drag any layer in MAP-X

...

Detailed Description

Current Behavior

Geojson larger than 40000 KB takes at least 30 minutes to upload.

Steps to Reproduce

1. Upload layer afg_russian_geology.geojson

...

Current Behavior

For those who do not have much experience with metadata, a guide of possible roles with the explanation can be very useful

Possible Solution

Drop down list with categories of roles. I take the list/image from the Geonetwork.

See image:

Current Behavior

Layer “Sampling point location” in Congo: is not possible to change the size of the points in the style form.

Expected Behavior

The data relative to each point or other kind of data that is selected on map when overposed should be separated by some space or thicker lines. It is not straightforward understanding how many objects were selected. It would also be extremely cool if while moving the pointer above the pop-up window the point to which that particular line is associated change color (to identify which point is that particular line of data associated to).

Current Behavior

when 2 points are clicked their data is shown on the pop-up windows without any space of limit between the lines of data relative to each point. This behavior makes difficult spotting which data is associated to which point and understanding how many points were selected.

Possible Solution

Steps to Reproduce

1. Select a view with point data (Size of mineral deposits (USGS 2006 - National) for example)
2. Select where more points are present
   3.Look at the pop-up windows results
   ...

Detailed Description

Expected Behavior

A scale and a north arrow must be added to MAP-X on views, screenshots & prints.

Expected Behavior

Give access to reviewers for some of the view layers.

Possible Solution

For each view, a "share" button would get a link containing the name of the view and the user's token. This link allows you to view only this view without having to identify yourself.

Expected Behavior

Add a small "box" (maybe at the bottom of the screen) with the x,y coordinates of the cursor.
This "box" could be dynamic (as in QGIS) and could allow the user to enter coordinates to access a specific area in MAP-X.