unltdnetworx / iobroker.snips Goto Github PK
View Code? Open in Web Editor NEWSnips-Adapter for ioBroker (Achtung: Einstellung der Snips-Plattform zum 31.01.2020 aufgrund Verkauf an Sonos)
Home Page: http://www.iobroker.net/
License: MIT License
Snips-Adapter for ioBroker (Achtung: Einstellung der Snips-Plattform zum 31.01.2020 aufgrund Verkauf an Sonos)
Home Page: http://www.iobroker.net/
License: MIT License
I am an automatic service from ioBroker that searches adapters and makes suggestions.
I noticed that your adapter is not integrated in the ioBroker.discovery. Using the Discovery adapter, ioBroker can automatically find devices or suggest services to the user for installation. If possible I would live to see your adapter added there.
Some adapters have already been added and you can use them as blueprints. See: https://github.com/ioBroker/ioBroker.discovery You need to fork this project and then create a PR for your adapter to be added.
Basically the plugins can do HTTP calls, UDP discovery, MDNS, UPNP and will iterate over all devices found by IP scan and check local serial ports. If you want you can also add new discovery methods but please try to do that with at least dependencies as possible.
Then create one file under lib/adapters for your adapter to implement the detection and proposal of an instance to the user.
On questions, the other developers will support in the forum or via GitHub issues too.
If no detection is possible, simply close this issue and I won't bother you again. ;-)
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
please remove usage of adapter.getMessage
, the method does nothing and will be removed in the next js-controller version
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/Bettman66/ioBroker.snips
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
Dear Adapter developer,
with js-controller 4.0 object definitions are now also checked that min/max in only provided for number/mixed objects and that the type of the default value matches to the object type.
If something is not correct this is logged as 'warning' or 'info' log.
Please also make sure to update to the lastest @iobroker/testing dependency 2.5.4 or to accept the PR from Apollon77 for legacy testing!
Please spent some time to verify your adapter by ideally starting with a fresh instance and do some actions and verify the log. If you see a warn or info log there from these checks please adjust the adapter and fix the relevant cases.
For questions please refer to ioBroker/ioBroker.js-controller#1749
Please close the issue after you checked it.
Thank you very much for your support to get the best experience for the growing numbers of ioBroker users!
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/unltdnetworx/ioBroker.snips
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/unltdnetworx/ioBroker.snips
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
Dear Adapter developer,
with js-controller 3.2 and js-controller 3.3 some additional checks were added to make sure that created objects match to the specifications and also written state values match to the object definition.
If something is not correct this is logged as 'warning' or 'info' log.
Please take the time to verify your adapter by ideally starting with a fresh instance and do some actions and verify the log. If you see a warn log there from these checks please adjust the adapter and fix the relevant cases.
For questions please refer to ioBroker/ioBroker.js-controller#1301
Additionally we are preparing Admin 5 which will have a completely rewritten UI. Please install Admin 5, activate that new UI and verify that the configuration of you adapter works as expected also there.
More informations on Admin 5 can be found in Forum https://forum.iobroker.net/topic/44282/test-adapter-admin-5-0-x-alpha-der-neuen-ui
Please close the issue after you checked it.
Thank you very much for your support!
Hi,
the new js-controller 2.0 will come into latest repository in the next days and we want to make sure that all adapters are working well. We already did a 2 weeks Beta test and so some adapter were aleady checked and some needed slight adjustments.
You can find more information in ioBroker/ioBroker.js-controller#482 and in the ioBroker Forum. If you have more technical questions please write in the referenced issue or in the Developer thread please. General questions are best in the genral thread.
Please update your systems to js-controller 2.0 and check your adapter.
Please close this issue once you have checked your adapter or received successfull reports from users.
Thank you very much for your support. Please contact us in the other Threads or Forum on any question.
Version: stable=1.5.0 (357 days old) => latest=1.5.1 (17 days old)
Installs: stable=175 (82.94%), latest=18 (8.53%), total=211
Click to edit
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/unltdnetworx/ioBroker.snips
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
We have detected that your adapter supports the compact mode. Please use the latest js-controller 2.0 and verify that everything works.
Some more information what is important to check can be found at ioBroker/ioBroker.js-controller#512
On questions please answer to the linked issue. Please close this issue after your test and add the version number that you have tested please as a comment.
Thank you for your support.
The upcoming version 2.0.0 of js-controller will support a new mode for low memory devices. For this, a few minor adjustments to the adapter must be made. Please follow these instructions: https://forum.iobroker.net/viewtopic.php?f=24&t=20387#p213466
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/Bettman66/ioBroker.snips
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
Dear fellows,
I'm using snips in iobroker with node-red.
Every time, "receive.text", has changed, I have to check "receive" for every single Device (Satellites).
After that, I have to check every slot to use it later.
Would I be possible to implement also a field "everything" with an array of all slotinformation (json?), including the sending device, so that only this field has to be taken from iobroker to node-red?
sincerly Kay Koch
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/unltdnetworx/ioBroker.snips
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
Version: stable=1.5.0 (355 days old) => latest=1.5.1 (15 days old)
Installs: stable=175 (82.55%), latest=17 (8.02%), total=212
Click to edit
We have detected that your adapter supports the compact mode. Please use the latest js-controller 2.0 and verify that everything works.
Some more information what is important to check can be found at ioBroker/ioBroker.js-controller#512
On questions please answer to the linked issue. Please close this issue after your test and add the version number that you have tested please as a comment.
Thank you for your support.
Dear Adapter developer,
Node.js 14 is now available for a year and Node.js 16 was release just some days ago and will become LTS by October 2021. We plan to update the ioBroker Node.js recommendation (currently 12.x) to 14.x later this year.
Please check your adapter with Node.js 14 especially, and ideally also directly with Node.js 16
Please add both versions to the adapter testing which is executed on commits.
If your adapter requires a certain minimum version of Node.js please set the 'engine' setting in package.json accordingly! Please also do this if the adapter is not able to work in certain Node.js versions, so that ioBroker can prevent users from installing te adapter if not compatible!
On questions please talk to us at ioBroker/ioBroker.js-controller#1138
Please close the issue after you checked it.
Thank you very much for your support!
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubusercontent.com/Bettman66/ioBroker.snips
Thanks,
your automatic adapter checker.
P.S.: There is a community in Github, which supports the maintenance and further development of adapters. There you will find many experienced developers who are always ready to assist anyone. New developers are always welcome there. For more informations visit: https://github.com/iobroker-community-adapters/info
During the installation of Version 0.0.5 i get an Error, the Adapter will not get installed correnctly.
Fertig mit Fehler: module.js:674 throw err; ^ SyntaxError: /opt/iobroker/node_modules/iobroker.snips/io-package.json: Unexpected string in JSON at position 396 at JSON.parse () at Object.Module._extensions..json (module.js:671:27) at Module.load (module.js:565:32) at tryModuleLoad (module.js:505:12) at Function.Module._load (module.js:497:3) at Module.require (module.js:596:17) at require (internal/module.js:11:18) at Upload.uploadAdapter (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js:219:23) at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:748:44 at Timeout.upload [as _onTimeout] (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js:287:57)
A question in advance:
Snips is bought from Sonos.
Google will buy Sonos.
The free gui is ending at first of february.
It's possible to remove snips from your adapter list default and lastest.
I'm worry snips won't work from first february and new operator want to install it.
Greetings,
Mathias
Hi,
the new js-controller 2.0 will come into latest repository in the next days and we want to make sure that all adapters are working well. We already did a 2 weeks Beta test and so some adapter were aleady checked and some needed slight adjustments.
You can find more information in ioBroker/ioBroker.js-controller#482 and in the ioBroker Forum. If you have more technical questions please write in the referenced issue or in the Developer thread please. General questions are best in the genral thread.
Please update your systems to js-controller 2.0 and check your adapter.
Please close this issue once you have checked your adapter or received successfull reports from users.
Thank you very much for your support. Please contact us in the other Threads or Forum on any question.
Hi, i got those warnings after js controller update:
snips.0 | 2021-07-17 12:05:54.730 | info | State value to set for "snips.0.devices.default.receive.slotTime" has to be type "number" but received type "string" |
---|---|---|---|
snips.0 | 2021-07-17 12:05:54.730 | info | State value to set for "snips.0.devices.default.receive.slotValue" has to be type "number" but received type "string" |
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.