vahempio / tasmota-for-ewelink Goto Github PK

I've received my gateway today and it has the V1.4 revision of the PCB.
Should this work with this firmware the same way?

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): _____
• Tasmota binary firmware version number used: _____
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

Attempted to flash zigbee firmware (.ota) from file and I get invalid file signature....

PROBLEM DESCRIPTION

The bin file under bin/ncp-uart-nsw_6.7.9_115200.ota is not a real ota file but seems to be an HTML.

REQUESTED INFORMATION

--

TO REPRODUCE

Check file content

EXPECTED BEHAVIOUR

File to look similar to https://github.com/arendst/Tasmota/blob/development/tools/fw_SonoffZigbeeBridge_ezsp/ncp-uart-nsw_6.7.9_115200.ota

SCREENSHOTS

--

ADDITIONAL CONTEXT

--

PROBLEM DESCRIPTION

backlog Template {"NAME":"ZB-GW03-V1.3","GPIO":[0,0,3552,0,3584,0,0,0,5793,5792,320,544,5536,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,608,640,32,0,0,0,0,0],"FLAG":0,"BASE":1} ; module 0

but i cannot get ETHERNET to work.
Nothing shows in the Console about ETH.
In my router i do not get a DHCP record.
Can you help me out?

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): _____
• Tasmota binary firmware version number used: _____
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:
Used

• Provide the output of this command: Status 0:

  STATUS 0 output here:

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:
backlog Template {"NAME":"ZB-GW03-V1.3","GPIO":[0,0,3552,0,3584,0,0,0,5793,5792,320,544,5536,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,608,640,32,0,0,0,0,0],"FLAG":0,"BASE":1} ; module 0

but i cannot get ETHERNET to work.
Nothing shows in the Console about ETH.
In my router i do not get a DHCP record.
Can you help me out?

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

Can you update to the latest 12.0.2? I've tried building it with your code changes and I cant seem to get it to compile. May be an issue on my end only.

If you manage to get it working, can you update the .bin for us not-so-tech-savy?

Any chance you can upgrade the firmware to 12.3.0?

HI,you have a good job with the device,Thank You for that!
when I config zigbee2mqtt with:(192.168.1.136 is the zigbee bridge device with tasmota32-v12.0.2-EWELINK.bin,I read your answer in the other issue ),

serial:
  port: tcp://192.168.1.136:8888

zigbee2mqtt log is：

Zigbee2MQTT:error 2022-09-17 15:56:37: Exiting...
Zigbee2MQTT:error 2022-09-17 15:56:38: Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
    at ZStackAdapter.start (/app/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:103:27)
    at Controller.start (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:132:29)
    at Zigbee.start (/app/lib/zigbee.ts:58:27)
    at Controller.start (/app/lib/controller.ts:101:27)
    at start (/app/index.js:109:5)

some thing in the tasmota console log tell me the z2m try to connect to the zigbee bridge but did't got the right response:

16:58:46.350 TCP: Got connection from 192.168.1.27
16:58:46.353 TCP: to MCU/1: EF
16:58:47.397 TCP: to MCU/1: FE00210120
16:58:53.402 TCP: to MCU/1: FE00210120
16:58:59.405 TCP: to MCU/1: FE00210120

can you help me?