Bootloader can't get IP from DHCP Server about gd32f407re-dmx512-rdm HOT 18 CLOSED

Unfortunately there is a documentation missing for the board and the functionality of the code to get starting. :( I also tried the OPI zero , that one works like a charm btw.

from gd32f407re-dmx512-rdm.

There is documentation here -> https://www.gd32-dmx.org

The readme here -> https://github.com/vanvught/GD32F407RE-Bootloader-TFTP tells that the bootloader must be loaded and then the firmware at 0x08007000. You can install the initial firmware also with the GD32 tools ( http://www.gd32mcu.com/en/download/7?kw=GD32F4) or when the KEY_BOOTLOADER_TFTP_GPIO_PINx is pressed during reset, the Java UI can be used.

i can see the device in the Firmware Update Manager, but with an ip in the range of 169.x.x.x.

The 169.254.x.y is ZeroConfig and enabled when DHCP is not working ->https://www.orangepi-dmx.org/orange-pi/network-configuration/ethernet

By the way the PC0 LED is blinking in 500ms intervals.

The firmware is running.

the network settings for your firmware release? DHCP or Static IP?

Default is DHCP

from gd32f407re-dmx512-rdm.

With exception for the firmware with 4x RDM/DMX, you can use USART0 for debugging -> https://www.gd32-dmx.org/dev-board.html

from gd32f407re-dmx512-rdm.

I also tried the OPI zero , that one works like a charm btw.

The GD32 firmware is exactly the same as the OPi firmware functionality.

from gd32f407re-dmx512-rdm.

Thank you for your time & answer.
I don't see a reason why it is not connecting via DHCP. I am using the DP83848 also with stm32f407 and there is no problem. Although i use it there with static ip.
Since i can not compile the whole library for now because i don't have eclipse installed and i am not familiar with the GD32 device, is there a chance you can make for me a gd32f407re binary with a static ip? So i can see if it is a hardware or network problem. That would be the easiest way for me to troubleshoot the device now. On OPI, i can make changes to network via the network.txt file. But here i am stuck.

from gd32f407re-dmx512-rdm.

Since i can not compile the whole library for now because i don't have eclipse installed and i am not familiar with the GD32 device, is there a chance you can make for me a gd32f407re binary with a static ip?

No need to compile the firmware.

On OPI, i can make changes to network via the network.txt file.

The configuration can be done with (same as with the OPi):

1. Human readable UDP messages -> https://www.orangepi-dmx.org/orange-pi/remote-configuration-management-for-spi-flash
2. The sample Java UI -> https://github.com/vanvught/Remote-Config-UI/releases/tag/V19
3. RNC -> https://github.com/hippyau/rnc

from gd32f407re-dmx512-rdm.

i don't have eclipse installed

No need to install Eclipse CDT. You can just work with the make file.

from gd32f407re-dmx512-rdm.

The configuration can be done with (same as with the OPi):

1. Human readable UDP messages -> https://www.orangepi-dmx.org/orange-pi/remote-configuration-management-for-spi-flash

2. The sample Java UI -> https://github.com/vanvught/Remote-Config-UI/releases/tag/V19

3. RNC -> https://github.com/hippyau/rnc

Since i am not able to get an dynamic IP from the device, i can not use the above solutions to change to static IP. I tried also rnc now and it is not able to detect the device. The rnc app is stuck on "Searching please wait".
The device is there in the firmware update window but as i said with an 169.x.x.x IP. And for example if i try to read the version from Action->version it comes with : "169.254.71.43 Bootloader TFTP , #Error - Timeout" message. I also can NOT turn on the TFTP server of course. I am out of ideas.

from gd32f407re-dmx512-rdm.

Ok so i finally managed the device to obtain an IP adress and flashed the firmware. So everything is fine.
What i did: I just tried another router and it worked.
Thanks so much for your help and your great work!

from gd32f407re-dmx512-rdm.

What i did: I just tried another router and it worked.

What would be different with this other router?

from gd32f407re-dmx512-rdm.

What i did: I just tried another router and it worked.

What would be different with this other router?

At the moment i really have no idea.
The one that not worked, is my new router for my fiber internet. Upon connecting the gd32 device to one of my old routers it got the ip assigned. Need to look more deeper to the fiber router settings.

Edit: Of course, both routers have the DHCP enabled and their IP is 192.168.0.1

from gd32f407re-dmx512-rdm.

At the moment i really have no idea.

I am happy to look at Wireshark captures for the DHCP process.

from gd32f407re-dmx512-rdm.

I noticed that the router which does not assigns an ip uses DHCPv6. Could this be a reason?
I will send you later the wireshark capture too.

from gd32f407re-dmx512-rdm.

Hi Arjan,

Happy weekend.

Unfortunately i have difficulties with uploading the firmware through the TFTP server.
The TFTP server starts sometimes and sometimes not. And when it starts, the UDP file transfer will fail with "receive timed out" error message.
I spent now so much time on this and don't wanna give up. I wish there was a way to flash the firmware through SWD on the chip without dealing with UDP and TFTP.

The readme here -> https://github.com/vanvught/GD32F407RE-Bootloader-TFTP tells that the bootloader must be loaded and then the firmware at 0x08007000.

I tried as you mentioned to first flash the bootloader at 0x08000000 (the bootloader works fine btw.) and then the firmware to 0x08007000 through SWD, but that does not work for me. The firmware will not start.
Could you please give me some tips on how to flash the firmware without the TFTP server but with SWD?
Thank you for taking time.

Note: Where can i buy the PCB's for GD32F4xx board? Do you have some?

from gd32f407re-dmx512-rdm.

Note: Where can i buy the PCB's for GD32F4xx board? Do you have some?

I have all the files ready for ordering at JLCPCB. I've just ordered a new batch with the SPI flash on the PCB. I will publish the files as soon as I received the boards and tested successfully.
Where do you live? When in Europe, it is worthwhile sending to you. Otherwise, it is better when you order directly from JLCPCB.

from gd32f407re-dmx512-rdm.

and then the firmware to 0x08007000

My apologies here, the firmware is at 0x08008000 -> https://github.com/vanvught/GD32F407RE-DMX512-RDM/blob/main/firmware-template-gd32/gd32f407re_flash.ld#L3

I do not have GD32-Link, therefore I do not use SWD. I flash the bootloader with USB UDF or USART0 (unfortunately on Windows only). Then I load the firmware with the TFTP server.

from gd32f407re-dmx512-rdm.

My apologies here, the firmware is at 0x08008000 ->

Omg, this solved the issue. Now i am able to flash the firmware with SWD too. And everything works fine. Thank you.

from gd32f407re-dmx512-rdm.

I've just ordered a new batch with the SPI flash on the PCB. I will publish the files as soon as I received the boards and tested successfully.

Oh, as i will use the board definetely with the spi flash, i better wait for the new board then. Hopefully the board test will run fine for you.
I don't live in the EU, so i will take the jlcpcb option then.

from gd32f407re-dmx512-rdm.