vatanuki / silan Goto Github PK

I have this:
audio rush 5.1 decoder

and I what to add some functions, but when i use the serial port I only see something like this: `Clocks: CPU:150MHz, SDR:150MHz, DSP:150MHz, PLL:300MHz
Bootloader version: nbap_0.4.0_sc6138a-spdif-000_20151024.1508

boot up with partition 1

dstaddr:0xa1c00000, srcadg⸮⸮⸮⸮⸮0⸮L⸮⸮. nenth;0x⸮⸮u⸮L�c⸮�⸮⸮⸮⸮su}:0x60⸮3vs87#mem�v⸮⸮⸮�⸮y⸮տ{{⸮Z�⸮?⸮leck⸮w⸮0⸮⸮030fk8v!ok-⸮
N[nbu\WiIMIIi]YIZVRr�Z*+⸮%%isRR⸮⸮{⸮[n⸮ap] * Hello World!
[nbap] ***************.+⸮⸮�
_�⸮}�]R⸮⸮⸮V+⸮H(⸮kх⸮⸮⸮irq hcndlgr32<�⸮⸮⸮714⸮}0⸮�sk⸮⸮⸮⸮⸮⸮⸮poze gone
[nbap]silan_dsp_probe -> 0
Init Codec
Dea�⸮{lmonu//"⸮�⸮⸮onvig;301,-1
�DR+K⸮⸮⸮⸮⸮⸮2,50⸮⸮
slmno⸮s⸮oa}彥⸮⸮one0⸮⸮Codec ready
[nbap]sil}~_s˝⸮}⸮⸮⸮⸮⸮-⸮⸮0
⸮Li⸮⸮⸮⸮⸮vg⸮⸮⸮[⸮b⸮⸮⸮⸮⸮⸮}⸮⸮.0⸮.7r⸮1�generao_24⸮2⸮>⸮/⸮4⸮�⸮⸮⸮/⸮}ws}٥ɵ⸮⸮ɕ}⸮⸮⸮⸮}⸮⸮⸮⸮⸮ <
Stast0DSP/..
DSP online
[lib]send cmd = 17409
silan_dsp_ioctl cmd 17409, 0====
dsp_send_cmd 1
mbox_tx_work start
[DSP]=======recv irq =========
[DSP] dsp_mbox_recv cmd 1
[DSP] decode_start
cadsp_recv_cmd 1
dsp_recv_cmd 1 end
ll cmd break
DSP version: dspfw_00.00.0501_general_20151102.1551
dsp_send_cmd 1 end, ret 0
`

And did find the sdk or other information about it