voodoobrew101 / remote_control_power_wheels_project Goto Github PK
View Code? Open in Web Editor NEWThis program is intended to allow 2 inputs and one output for making a remote control power wheels Input one is a pwm signal from the remote reciever Input two is variable voltage from a 5v hall sensor pedal. I think my pedal is not great because the voltage range is pretty small. Output is in the form of a pwm signal that works with RC car speed controllers. There is a govenor conected to an aux channel that agjust the max speed the pedal will alow. I use spektrum remotes wich have a signal range of 1100-1900 pwm The failsafe for spektrum recievers is 1500 if the remote is not turned on. This Sets the Govenor to 50% when the remote is turned off The remote off govener speed can be adjused if your esc has a throttle curve. Set the 50% mark of the throttle curve to what you want the throttle off governor to be. My Forward/Neutral/Reverse switch is 3 position SPDT On-Off-On