whowechina / mai_pico Goto Github PK

Bug Description

Stuck on aime check when using io4

Steps to reproduce

1. Set segatools' io4 emulation to disable

[io4]
enable=0

2. Plug in the rp2040 with the burned-in firmware from the Production
3. Set hid to joy
4. Launching the game

Other

I tried to use lkick-io4 and it works everything perfectly

But I had to use multiple boards to replace what would have been done with a single board

mai2led已经更新，您的项目可否更新一下呢？
按键部分无法投币，
灯光部分还有一些不足，呼吸效果，渐变效果都没有。
如果补全这个工程真的就太棒了

您好，ITO玻璃的四角能否做成类似于官方原装触屏那种样式？
正方形的四角锋利且占据一定空间，如果能剪裁掉或将更加完美（不知道这是否会增加成本）

First of all, thanks for the writeup, its looks pretty straightforward and cool.

I have a question about sourcing the required glass. It seems relatively hard to find but I found this website walthly that say they can do it.

My only issue is that I was quoted $1500USD for their min order of 5 pieces, this seems quite excessive.

Is this similar to what sourcing it through the mentioned taobao store was?

部分壁厚太薄了，打印精度不够可能会有问题

Can anyone tell me how to configure s.ini? I am trying to write UF2 firmware, and a device named "Mai Pico" also appears in Windows. How can I configure my ini file?

The current configuration is as follows:

[vfs]
amfs=amfs
appdata=appdata
option=option

[dns]
default=16.0.0.140

[io4]
enable=0

[button]
enable=0

[aime]
enable=1

[jvs]
enable=0

The current symptom is getting stuck in Aime Check.

M2*5mm的自攻螺丝。。 只能堪堪露出尖头，锁不上盖板。。

我这边在嘉立创三维猴打印的按键，用M2*8mm的螺丝可以稳定锁上