undefinedC:\Users\22380\.platformio\packages\toolchain-xtensa-esp32\bin\xtensa-esp32-elf-gdb.exe: warning: Couldn't determine a path for the index cache directory.
Reading symbols from c:\Users\22380\Documents\GitHub\wireless-esp8266-dap\.pio\build\esp-wrover-kit\firmware.elf...
PlatformIO Unified Debugger -> https://bit.ly/pio-debug
PlatformIO: debug_tool = ftdi
PlatformIO: Initializing remote target...
Open On-Chip Debugger v0.11.0-esp32-20211220-1338-g554a6c26 (2022-04-08-09:23)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
adapter speed: 20000 kHz
WARNING: boards/esp32-wrover.cfg is deprecated, and may be removed in a future release.
If your board is ESP32-WROVER-KIT, use board/esp32-wrover-kit-1.8v.cfg instead.
adapter speed: 500 kHz
Info : tcl server disabled
Info : telnet server disabled
Info : clock speed 500 kHz
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
Warn : target esp32.cpu1 examination failed
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
Info : starting gdb server for esp32.cpu0 on pipe
Info : accepting 'gdb' connection from pipe
Info : esp32.cpu0: Target halted, PC=0x4000921A, debug_reason=00000000
Info : Set GDB target to 'esp32.cpu0'
Warn : No symbols for FreeRTOS!
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Error: Failed to get flash maps (4294967295)!
Warn : Failed to get flash mappings (-4)!
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Auto-detected flash bank 'esp32.cpu0.flash' size 4096 KB
Info : Using flash bank 'esp32.cpu0.flash' size 4096 KB
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Error: Failed to get flash maps (4294967295)!
Warn : Failed to get flash mappings (-4)!
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Using flash bank 'esp32.cpu0.irom' size 0 KB
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Error: Failed to get flash maps (4294967295)!
Warn : Failed to get flash mappings (-4)!
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Using flash bank 'esp32.cpu0.drom' size 0 KB
Info : New GDB Connection: 1, Target esp32.cpu0, state: halted
Warn : negative reply, retrying
0x4000921a in ?? ()
Error: FreeRTOS: uxTopUsedPriority is not defined, consult the OpenOCD manual for a work-around!
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Debug controller was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
Info : esp32.cpu1: Debug controller was reset.
Info : esp32.cpu1: Core was reset.
esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Debug controller was reset.
esp32.cpu1: Core was reset.
Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
Hardware assisted breakpoint 1 at 0x400d198f: file main/main.c, line 20.
PlatformIO: Initialization completed
PlatformIO: Resume the execution to `debug_init_break = thb app_main`
PlatformIO: More configuration options -> https://bit.ly/pio-debug
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Debug controller was reset.
...
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Debug controller was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Debug controller was reset.
esp32.cpu0: Core was reset.
pio_reset_run_target
Cannot execute this command while the target is running.
Use the "interrupt" command to stop the target
and then try again.
Cannot execute this command while the target is running.
Use the "interrupt" command to stop the target
and then try again.
Cannot execute this command while the target is running.
Use the "interrupt" command to stop the target
and then try again.
undefinedC:\Users\22380\.platformio\packages\toolchain-xtensa-esp32\bin\xtensa-esp32-elf-gdb.exe: warning: Couldn't determine a path for the index cache directory.
Reading symbols from c:\Users\22380\Documents\PlatformIO\Projects\DEMO\.pio\build\esp-wrover-kit\firmware.elf...
PlatformIO Unified Debugger -> https://bit.ly/pio-debug
PlatformIO: debug_tool = ftdi
PlatformIO: Initializing remote target...
Open On-Chip Debugger v0.11.0-esp32-20211220-1338-g554a6c26 (2022-04-08-09:23)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
adapter speed: 20000 kHz
WARNING: boards/esp32-wrover.cfg is deprecated, and may be removed in a future release.
If your board is ESP32-WROVER-KIT, use board/esp32-wrover-kit-1.8v.cfg instead.
adapter speed: 500 kHz
Info : tcl server disabled
Info : telnet server disabled
Info : clock speed 500 kHz
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
Info : esp32.cpu1: Debug controller was reset.
Info : esp32.cpu1: Core was reset.
Info : starting gdb server for esp32.cpu0 on pipe
Info : accepting 'gdb' connection from pipe
Info : esp32.cpu0: Target halted, PC=0x400E403E, debug_reason=00000000
Info : Set GDB target to 'esp32.cpu0'
Info : esp32.cpu1: Target halted, PC=0x400E403E, debug_reason=00000000
Warn : No symbols for FreeRTOS!
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Flash mapping 0: 0x10020 -> 0x3f400020, 30 KB
Info : Flash mapping 1: 0x20020 -> 0x400d0020, 82 KB
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Auto-detected flash bank 'esp32.cpu0.flash' size 4096 KB
Info : Using flash bank 'esp32.cpu0.flash' size 4096 KB
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Flash mapping 0: 0x10020 -> 0x3f400020, 30 KB
Info : Flash mapping 1: 0x20020 -> 0x400d0020, 82 KB
Info : Using flash bank 'esp32.cpu0.irom' size 84 KB
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Flash mapping 0: 0x10020 -> 0x3f400020, 30 KB
Info : Flash mapping 1: 0x20020 -> 0x400d0020, 82 KB
Info : Using flash bank 'esp32.cpu0.drom' size 32 KB
Info : New GDB Connection: 1, Target esp32.cpu0, state: halted
Warn : negative reply, retrying
0x400e403e in esp_pm_impl_waiti () at C:\Users\22380\.platformio\packages\framework-espidf\components\hal\esp32\include/hal/cpu_ll.h:183
183 asm volatile ("waiti 0\n");
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Debug controller was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
Info : esp32.cpu1: Debug controller was reset.
Info : esp32.cpu1: Core was reset.
esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Debug controller was reset.
esp32.cpu1: Core was reset.
Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Flash mapping 0: 0x10020 -> 0x3f400020, 30 KB
Info : Flash mapping 1: 0x20020 -> 0x400d0020, 82 KB
Flash mapping 0: 0x10020 -> 0x3f400020, 30 KB
Flash mapping 1: 0x20020 -> 0x400d0020, 82 KB
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Auto-detected flash bank 'esp32.cpu1.flash' size 4096 KB
Info : Using flash bank 'esp32.cpu1.flash' size 4096 KB
** Programming Started **
Auto-detected flash bank 'esp32.cpu1.flash' size 4096 KB
Using flash bank 'esp32.cpu1.flash' size 4096 KB
** Programming Started **
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : PROF: Data transferred in 1010.16 ms @ 27.7183 KB/s
PROF: Data transferred in 1010.16 ms @ 27.7183 KB/s
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
** Programming Finished **
** Verify Started **
** Programming Finished **
** Verify Started **
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
** Verified OK **
** Verified OK **
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Debug controller was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
Info : esp32.cpu1: Debug controller was reset.
Info : esp32.cpu1: Core was reset.
esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Debug controller was reset.
esp32.cpu1: Core was reset.
Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
** Programming Started **
** Programming Started **
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : PROF: Data transferred in 158.033 ms @ 25.3112 KB/s
PROF: Data transferred in 158.033 ms @ 25.3112 KB/s
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
** Programming Finished **
** Verify Started **
** Programming Finished **
** Verify Started **
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
** Verified OK **
** Verified OK **
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Debug controller was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
Info : esp32.cpu1: Debug controller was reset.
Info : esp32.cpu1: Core was reset.
esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Debug controller was reset.
esp32.cpu1: Core was reset.
Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
** Programming Started **
** Programming Started **
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : PROF: Data transferred in 6049.46 ms @ 27.7711 KB/s
PROF: Data transferred in 6049.46 ms @ 27.7711 KB/s
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
** Programming Finished **
** Verify Started **
** Programming Finished **
** Verify Started **
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
** Verified OK **
** Verified OK **
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Debug controller was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
Info : esp32.cpu1: Debug controller was reset.
Info : esp32.cpu1: Core was reset.
esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Debug controller was reset.
esp32.cpu1: Core was reset.
Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
Hardware assisted breakpoint 1 at 0x400e3de0: file src/main.c, line 1.
PlatformIO: Initialization completed
PlatformIO: Resume the execution to `debug_init_break = thb app_main`
PlatformIO: More configuration options -> https://bit.ly/pio-debug
Info : esp32.cpu0: Target halted, PC=0x400E3DE0, debug_reason=00000001
esp32.cpu0: Target halted, PC=0x400E3DE0, debug_reason=00000001
Info : Set GDB target to 'esp32.cpu0'
Set GDB target to 'esp32.cpu0'
Info : esp32.cpu1: Target halted, PC=0x400E403E, debug_reason=00000000
esp32.cpu1: Target halted, PC=0x400E403E, debug_reason=00000000
[New Thread 1073440948]
[New Thread 1073439060]
[New Thread 1073413508]
[New Thread 1073432724]
[New Thread 1073412896]
[Switching to Thread 1073437172]
Thread 1 "main" hit Temporary breakpoint 1, app_main () at src/main.c:1
1 void app_main() {
Note: automatically using hardware breakpoints for read-only addresses.
Thread 1 "main" hit Breakpoint 5, app_main () at src/main.c:4
4 a++;
undefinedC:\Users\22380\.platformio\packages\toolchain-xtensa-esp32\bin\xtensa-esp32-elf-gdb.exe: warning: Couldn't determine a path for the index cache directory.
Reading symbols from c:\Users\22380\Documents\GitHub\wireless-esp8266-dap\.pio\build\esp-wrover-kit\firmware.elf...
PlatformIO Unified Debugger -> https://bit.ly/pio-debug
PlatformIO: debug_tool = ftdi
PlatformIO: Initializing remote target...
Open On-Chip Debugger v0.11.0-esp32-20211220-1338-g554a6c26 (2022-04-08-09:23)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
adapter speed: 20000 kHz
WARNING: boards/esp32-wrover.cfg is deprecated, and may be removed in a future release.
If your board is ESP32-WROVER-KIT, use board/esp32-wrover-kit-1.8v.cfg instead.
adapter speed: 500 kHz
Info : tcl server disabled
Info : telnet server disabled
Info : clock speed 500 kHz
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
Warn : target esp32.cpu1 examination failed
Info : starting gdb server for esp32.cpu0 on pipe
Info : accepting 'gdb' connection from pipe
Info : esp32.cpu0: Target halted, PC=0x4000921A, debug_reason=00000000
Info : Set GDB target to 'esp32.cpu0'
Warn : No symbols for FreeRTOS!
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Error: Failed to get flash maps (4294967295)!
Warn : Failed to get flash mappings (-4)!
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Auto-detected flash bank 'esp32.cpu0.flash' size 4096 KB
Info : Using flash bank 'esp32.cpu0.flash' size 4096 KB
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Error: Failed to get flash maps (4294967295)!
Warn : Failed to get flash mappings (-4)!
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Using flash bank 'esp32.cpu0.irom' size 0 KB
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Error: Failed to get flash maps (4294967295)!
Warn : Failed to get flash mappings (-4)!
Info : esp32.cpu0: Target halted, PC=0x4009260E, debug_reason=00000001
Info : Using flash bank 'esp32.cpu0.drom' size 0 KB
Info : New GDB Connection: 1, Target esp32.cpu0, state: halted
Warn : negative reply, retrying
0x4000921a in ?? ()
Error: FreeRTOS: uxTopUsedPriority is not defined, consult the OpenOCD manual for a work-around!
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Debug controller was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
Info : esp32.cpu0: Core was reset.
esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
Info : esp32.cpu1: Debug controller was reset.
Info : esp32.cpu1: Core was reset.
esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Debug controller was reset.
esp32.cpu1: Core was reset.
Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
Hardware assisted breakpoint 1 at 0x400e39ac: file main/main.c, line 18.
PlatformIO: Initialization completed
PlatformIO: Resume the execution to `debug_init_break = thb app_main`
PlatformIO: More configuration options -> https://bit.ly/pio-debug
Warn : address 0x400e39af not writable
Error: esp32.cpu0: Failed to write breakpoint instruction (-4)!
Error: esp32.cpu0: Failed to add SW breakpoint!
Error: can't add breakpoint: unknown reason
Warning:
Cannot insert breakpoint 2.
Cannot access memory at address 0x400e39af
Command aborted.
在此,还想提问一下,是否存在一种可能,使得在未经main执行前,jtag所对应的引脚已经被启用,虽然并没有进行init,但是会扰乱原本的引脚信号,从而使得jtag无法进行调试?