如图所示一篇图文混排, 涉及到字体, 颜色, 字间距, 行间距, 图片对齐, 文字对齐, 描边等等属性, 还有网络图片与本地图片混排, 手势响应等需求, 使用本框架可以下面这样实现:
//...省略常量声明
//标题
title.font(titleFont).color(titleColor).onClicked(titleOnClicked).onLayout(titleOnLayout);
//首段
firstPara.color(firstParaColor).align(@0);
//图片需要用一个空字符串起头
NSString *webImageString = @"".append(webImageURL).font(separateLineFont).minLineHeight(@100);
//分割线
separateLine.font(separateLineFont).strokeColor(separateLineColor).strokeWidth(@1);
//本地图片
NSString *locolImageString = @"".append(locolImage);
//最后一段
lastPara.font(lastParaFont).align(@1);
//书名
bookName.font(bookNameFont).color(bookNameColor).onClicked(bookOnClicked).align(@1);
//引用
quote.color(quoteColor).letterSpace(@0).minLineSpace(@8).align(@0);
//设置全局默认属性, 优先级低于指定属性
NSString *defaultAttributes = @"".entire()
.maxSize(maxSize).align(@2).letterSpace(@3).minLineHeight(@20).maxLineHeight(@20).attachAlign(@1).onClicked(textOnClicked).attachSize(attachSize);
//拼接
title.append(firstPara).append(webImageString).append(separateLine).append(locolImageString).append(lastPara).append(bookName).append(quote)
//设置默认属性
.append(defaultAttributes)
//绘制View
.drawView(^(UIView *drawView) {
[self.view addSubview:drawView];
});
甚至可以这样实现:
//...省略常量声明
@""
//拼接全文
.append(title).font(titleFont).color(titleColor).onClicked(titleOnClicked).onLayout(titleOnLayout)
.append(firstPara).color(firstParaColor).align(@0)
.append(webImageURL).font(separateLineFont).minLineHeight(@100)
.append(separateLine).font(separateLineFont).strokeColor(separateLineColor).strokeWidth(@1)
.append(locolImage)
.append(lastPara).font(lastParaFont).align(@1)
.append(bookName).font(bookNameFont).color(bookNameColor).onClicked(bookOnClicked).align(@1)
.append(quote).color(quoteColor).letterSpace(@0).minLineSpace(@8).align(@0)
//设置默认属性
.entire().maxSize(maxSize).align(@2).letterSpace(@3).minLineHeight(@20).maxLineHeight(@20).attachAlign(@1).onClicked(textOnClicked).attachSize(attachSize)
//绘制
.drawView(^(UIView *drawView) {
[self.view addSubview:drawView];
});
对 NSString 的扩展, 操作字符串生成绘制对应视图
-
append(id content)
拼接 content 可以是文本(NSString)、图片(UIImage)、图片链接(NSURL)(必须指定attachSize属性)、视图(CALayer/UIView)
-
entire()
设置整段富文本 优先级低于指定属性, 较为重要的属性 maxSize 设置绘制约束, 部分段落属性只在整段中设置生效
-
drawLayer(^(CALayer *drawLayer)completion)
绘制layer, 无法响应手势, 当有UIView混排建议使用 drawView
-
drawView(^(UIView *drawView)completion)
绘制View, 可响应手势, 建议使用此API
- verticalOffset 垂直偏移
- onClicked 点击回调
- onLayout 展示回调
- cacheFrame 缓存该段文本绘制位置
- font 字体: 文字字体/图片居中对齐字体
- color 颜色
- letterSpace 字间距
- strokeWidth 描边宽度, 整数为镂空, Color不生效; 负数Color生效
- strokeColor 描边颜色
- verticalForm 文字绘制随文字书写方向, 默认 否(0), 是(非0)
- underline 下划线类型, 整形, 0为none, 1为细线 2为加粗 9为双条 参考 CTUnderlineStyle(仅枚举了三种, 其他值也有不同效果)
- attachSize 图片尺寸, 默认为图片本身尺寸, 会根据图片缩放(2x 3x)自动调整
- attachAlign 图片对齐模式, 0为默认, 基准线对齐. 1为居中对齐至特定字体大小 参看 ZJTextattachAlign
- maxSize 绘制的约束尺寸, 默认不限制
- minLineSpace 最小行间距
- maxLineSpace 最大行间距
- minLineHeight 最小行高
- maxLineHeight 最小行高
- align 对齐, 整形, 0为默认靠左 1为靠右 2为居中, 参考 CTTextAlignment
- lineBreakMode 对齐, 整形, 参考 NSLineBreakMode
总体采用 CoreText + 异步绘制图片完成, 理论上性能会比较高, 经过测试如下数据供参考:
内容: 一段文本加上两张图片
机型: iPhone 6
测试结果:
常规(使用NSAttributedString + UILabel)过程: 创建->显示(绘制) 常规分析:
- 主线程代码在 28ms 左右. (主线程代码开始 至 结束耗时)
- UILabel 显示(绘制)耗时在 42ms 左右. (addSubview 至 drawRect 耗时)
- 综合耗时 70ms 左右, 全部在主线程
异步绘制(本框架)过程: 创建->异步绘制->显示 异步绘制分析:
- 主线程(创建)代码在 28ms 左右. (主线程代码开始 至 结束耗时)
- 创建(主线程) + 异步绘制耗时 84ms 左右. (主线程代码开始 至 绘制出图片回调)
- 由 1、2 得出子线程绘制耗时 56ms 左右, 另外经过多次试验(大段文字绘制)得出绘制复杂的段落也耗时增长较少
- 显示耗时 0.75 ms 左右. (addSubview 至 drawRect 耗时)
- 综合耗时 85ms 左右, 其中主线程 29ms, 子线程 56ms
结论:
- 相较于常规方式降低了主线程压力 70ms -> 29ms
- 越复杂的文本收益越高(多控件合一, 异步绘制), 上图中大段富文本绘制时间也只多了 15ms, 耗时增长少
- 总体耗时增加了15ms, 都在子线程, 毕竟处理的逻辑比系统的多
- 与 YYText 总体性能相仿
网络图片下载缓存策略依赖 'SDWebImage'.
pod 'ZJAttributedText'
ZJAttributedText is available under the MIT license. See the LICENSE file for more info.