The KR260 carrier defines a GPIO interface for the various PMOD connectors on the board, however, due to the way it's defined, when you try to connect it to a GPIO IP it only sees the first of the pins, and there doesn't appear to be any way to resolve this properly without editing the board definitions.

I think instead of defining each as a distinct physical port, they need to be grouped as part of the same physical port definition possibly. If there's a way to get around this, it's not documented anywhere that I can see

In preset.xml, it should be:

<ip vendor="xilinx.com" library="ip" name="cmac_usplus">
                  <user_parameters>
                        <user_parameter name="CONFIG.GT_TYPE" value="GTY" />
                        <user_parameter name="CONFIG.CMAC_CAUI4_MODE" value="1" />
                        <user_parameter name="CONFIG.NUM_LANES" value="4" />
                        <user_parameter name="CONFIG.CMAC_CORE_SELECT" value="CMACE4_X0Y4" />
                        <user_parameter name="CONFIG.GT_GROUP_SELECT" value= "X0Y28~X0Y31" />
                        <user_parameter name="CONFIG.RS_FEC_TRANSCODE_BYPASS" value= "0" />
                  </user_parameters>
                </ip>

And not

 <ip vendor="xilinx.com" library="ip" name="cmac_usplus">
                  <user_parameters>
                        <user_parameter name="CONFIG.GT_TYPE" value="GTY" />
                        <user_parameter name="CONFIG.CMAC_CAUI4_MODE" value="1" />
                        <user_parameter name="CONFIG.NUM_LANES" value="4" />
                        <user_parameter name="CONFIG.CMAC_CORE_SELECT" value="CMACE4_X0Y7" />
                        <user_parameter name="CONFIG.GT_GROUP_SELECT" value= "Quad_X0Y7" />
                        <user_parameter name="CONFIG.RS_FEC_TRANSCODE_BYPASS" value= "0" />
                  </user_parameters>
                </ip>

Hello, on the diligent vivado board master file, cmods7-25 exists, but it is not available on the vivado xhub store or here. Could you create a board file for CMODS7-25?

In your README.md file says;

The Board Store is an open source repository of Board data files designed primarily for use with the Xilinx Vivado Design Suite.

However, I can't seem to find any information about what license this repo is under?

You can find info about adding a license file at https://docs.github.com/en/free-pro-team@latest/github/building-a-strong-community/adding-a-license-to-a-repository

See https://docs.github.com/en/free-pro-team@latest/github/creating-cloning-and-archiving-repositories/licensing-a-repository , https://github.blog/2016-09-21-license-now-displayed-on-repository-overview/ and https://opensource.guide/legal/

I would recommend talking to @clavin-xlnx if you need advice.

Hello, It seems that Engineering Samples for ZCU216 are not available in this version. Coul be added from branch 2020.2?

Here is the main one with discussions:
#579

I get

ERROR: [Common 17-1475] Error reading json file 'C:/Users/[.,.]/AppData/Roaming/Xilinx/Vivado/2020.2/xhub/board_store/xilinx_board_store/XilinxBoardStore/Vivado/2020.2/.staging/boards/Trenz_Electronic/TE0725LP/1.0/xitem.json'.

I think it's the same issue as mentioned here
https://forums.xilinx.com/t5/Design-Entry/Vivado-2019-2-Update-Board-Repositories-failing/td-p/1099617

which was fixed I believe here:
725ca6e#diff-910406bb80736645e65416895549d4828ff0dbe87332b9e105f77aedc2aa674a
and

vivado_2020.2.json should contain lines 3064-3100 of
https://github.com/Xilinx/XilinxBoardStore/blob/2020.1/catalog/vivado_2020.1.json

LINE 28 OF BOARD.XML xcu50-fsvh2104-2L-e
and line 2 of part0_pins.xml xcu50-fsvh2104-2L-e

Both should be xcu50-fsvh2104-2-e

Kria KV260 Vision AI Starter Kit User Guide (UG1089) gives a links to this git,but there is no KV260 related Vivado board files

When using the board file for Vivado2019.1 I'm getting this error.

maybe it has something to do with the "es1" part in the name?
./part0_pins.xml:<part_info part_name="xcu280-fsvh2892-2L-e-es1">

TCL in Vivado gives:
Error reading json file ...../boards/Xilinx/au50/es/1.0/xitem.json
The board is not present in this repo anymore

Hi,

I was trying to add the au280 board part (in branch 2018.3) to Vivado 2018.3. However, it seems that the board files cannot be recognized and I got this warning in the log.

WARNING: [Board 49-26] cannot add Board Part xilinx.com:au280:part0:1.0 available at /work/shared/common/xilinx/Vivado/XilinxBoardStore/boards/Xilinx/au280/1.0/board.xml as part xcu280-fsvh2892-2l-e-es1 specified in board_part file
 is either invalid or not available
WARNING: [Board 49-26] cannot add Board Part xilinx.com:au280:part0:1.1 available at /work/shared/common/xilinx/Vivado/XilinxBoardStore/boards/Xilinx/au280/1.1/board.xml as part xcu280-fsvh2892-2l-e-es1 specified in board_part file
 is either invalid or not available

I also tried to open XIC and import the board files according to this post: https://forums.xilinx.com/t5/Design-Entry/WARNING-Board-49-26-cannot-add-Board-Part-xilinx-com-au200-part0/td-p/1069210

But unfortunately, XIC cannot be opened and it returned the following errors:

(test) [user@server xic]$ ./xic
Exception in thread "main" java.lang.ExceptionInInitializerError
	at com.xilinx.xic.z.a(Unknown Source)
	at com.xilinx.xic.P.b(Unknown Source)
	at com.xilinx.xic.P.<init>(Unknown Source)
	at com.xilinx.xic.z.<init>(Unknown Source)
	at com.xilinx.xic.XIC.<init>(Unknown Source)
	at com.xilinx.xic.XIC.l(Unknown Source)
	at com.xilinx.xic.XIC.main(Unknown Source)
Caused by: java.lang.IllegalArgumentException: /home/user/.Xilinx/registry/notifications.xml (No such file or directory)
	at [email protected]/javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)
	at p.a.e(Unknown Source)
	at p.a.<init>(Unknown Source)
	at p.a.<clinit>(Unknown Source)
	... 7 more

It seems that the RFSoC2x2 board files are only available inside the 2020.1 branch. Would it be possible to add them also to the 2020.2, as it is presently the "official" for the development with PYNQ? Of course, if it can be upgraded to all the upper versions, it would be fantastic.

Thanks in advance

Hello everyone,

the commits 691ebe7 and 3ccc05c
removed support for Alveo cards in Vivado flow.

Why? Can you revert them, please?

Thank you, best regards.