ylj2000 / hdmi_to_mipi Goto Github PK

大佬能否确认一下是问题的原因是什么，硬件设计，还是驱动问题？

我现在在做tc358840的驱动，需要840的寄存器配置脚本，麻烦问一下大佬870配置脚本从哪找到的

Hello
Having issues with configuration for new panels

I have 2 similar panels (same driving IC-NT51021) - 1200x1920-60Hz

• AUO G080UAN01.0 - DATASHEET
• Innolux N080JCE-G41 - Didn't find datasheet but checked Linux kernel for timings/configuration

One thing that bothers me in Main_Parameters is table HDMI Input
HPW - must be >=32 (but for my panels that number is 1)
VSW - must be 2-1023 (but in datasheet is 1)

If I fill all data with datasheet values I get 60Hz but not working as it should(status for some filed is NG), getting artifacts and after few min flickering, so tried to use different data (min that is required in field below), I get 58.278Hz, have flickering still but rarely, and on HDMI disconnect/connect ghosting/fading

Do you have any advice or you know how to get this data right so can make this working?
Thanks a lot

是否可以默认横屏？因为更多是横屏需要，如果能做到横竖切换就更好了～(￣▽￣～)~

这里使用立创EDA，导入AD时，需要PcbDoc的格式时文本格式的。请问是否方便上传一份文本格式的PcbDoc。AD在导出时有该选项。感谢。