zeisss / jane Goto Github PK

#Jane

Jane is released in Version 1.1 - Black Widow

##What is Jane?

• A system to control home devices e.g.: AVR, TV or other IR devices and computers via SSH
• Jane uses Tasker with AutoVoice to control the system with your voice

##What is working?

• Infrared control code receiving
• Sending single infrared codes via Tasker using AutoVoice
• Sinatra Webserver
• Remote Control Outlets

###Addons

• SSH connection + command execution
• SunSet

##Requirements

• Raspberry PI + raspbian
• eurocard or plugboard
• 1x IR-Emitter - TSAL 6200
• 1x IR-Receiver - TSOP4838
• 1x 1 kOhm Resistor
• 1x 100 Ohm Resistor
• 1x bipolar Transistor NPN - BC547C
• WiFi-stick recommended for more flexibility

##Circuit plan

##Software installation ###LIRC Enter the following commands:

• $ sudo apt-get install lirc
• $ sudo vim /etc/modules
• Add the following lines:
• lircv_dev
• lirc_rpi gpio_in_pin=22 gpio_out_pin=23

###LIRC configuration

• $ cd /etc/lirc/
• $ sudo vim hardware.conf Enter/comment the following line:
• LIRCD_ARGS="--listen" TCP Listener at Port 8765
• #START_LIRCMD=false
• #START_IREXEC=false
• LOAD_MODULES=true
• DRIVER="default"
• DEVICE="/dev/lirc0"
• MODULES="lirc_rpi" Save and quit the file and execute the following
• $ sudo /etc/init.d/lirc restart

##Read key codes

• The standard configuration file is located in /etc/lirc/lircd.conf
• For the first tests, create the file ~/led.conf
• LIRC have a lot options for key bindings, to see the options execute:
• $ irrecord -list namespace
• Notice the keys you need
• To test the receiver execute: $ sudo irrecord -d /dev/lirc0 ~/led.conf
• All commands are stored in ~/led.conf now. Copy the whole content in /etc/lirc/lircd.conf
• For each control you have to repeat this procedure

• First restart the lirc daemon sudo /etc/init.d/lirc restart
• To send a command execute: $ irsend SEND_ONCE "name of the control" "key"
• example: $ irsend SEND_ONCE TV KEY_POWER

! No active development for now ! The Android app is located in a seperate repostiroy:

• Jane-app

• HomeCheck (addon)
• new Material Design WebUI
• Temperaturesensor with light feedback

see LICENSE files