zho-zho-zho / comfyui-artgallery Goto Github PK

I use stability Matrix

Cmd('git') failed due to: exit code(128)
cmdline: git clone -v --recursive --progress -- https://github.com/ZHO-ZHO-ZHO/ComfyUI-ArtGallery.git E:\Stabilty Matrix AI\Data\Packages\ComfyUI\custom_nodes\ComfyUI-ArtGallery

and if i use cmd directly on custom_nodes i get :

git clone https://github.com/ZHO-ZHO-ZHO/ComfyUI-ArtGallery.git
Cloning into 'ComfyUI-ArtGallery'...
remote: Enumerating objects: 1949, done.
remote: Counting objects: 100% (399/399), done.
remote: Compressing objects: 100% (386/386), done.
error: RPC failed; curl 92 HTTP/2 stream 5 was not closed cleanly: CANCEL (err 8)
error: 7956 bytes of body are still expected
fetch-pack: unexpected disconnect while reading sideband packet
fatal: early EOF
fatal: fetch-pack: invalid index-pack output

any ideas ?

如题

很棒的工作！

一点建议：希望类似pyssss的lora和模型加载节点，在浏览选择艺术家、风格等下拉图片列表时，能够随着鼠标移动实时显示对应的图片，这样更方便根据样例图片选择对应的艺术家等。

when launching comfyui this error appears:

C:\Users\Luna\Documents\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-ArtGallery../../web/extensions/core/uploadImage.js
Original code block not found.❌
File 'C:\Users\Luna

\Documents\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-ArtGallery../../folder_paths.py' updated successfully.✅
Original code block not found.❌

I cant find those to install missing nodes:

Any guide on this?

项目克隆了好几次，太容易失败了，而且相对于国内，github的下载速度并不快
个人理解：
项目中提到 预览图片的作用一是可视化提示词（也提到这个是重点），二是输出参考图。所以个人觉得它不太需要有多么精细的画质，可以把它的画质降低或者大小再压缩一下，然后再放在项目中；或者是把预览图片与项目做分离，把它放在其他网盘中提供下载

下面是在终端上克隆项目的日志，失败了好几次，现在已经下载至少半个多小时，才下载 58% ，大小已经快 1个 G 了。太难了

PS D:\05Tools\Stable_Diffusion\Blender_ComfyUI\ComfyUI\custom_nodes> git clone https://github.com/ZHO-ZHO-ZHO/ComfyUI-ArtGallery.git
Cloning into 'ComfyUI-ArtGallery'...
remote: Enumerating objects: 1949, done.
remote: Counting objects: 100% (399/399), done.
remote: Compressing objects: 100% (386/386), done.
error: RPC failed; curl 92 HTTP/2 stream 5 was not closed cleanly: CANCEL (err 8)
error: 2427 bytes of body are still expected
fetch-pack: unexpected disconnect while reading sideband packet
fatal: early EOF
fatal: fetch-pack: invalid index-pack output
PS D:\05Tools\Stable_Diffusion\Blender_ComfyUI\ComfyUI\custom_nodes> git clone https://github.com/ZHO-ZHO-ZHO/ComfyUI-ArtGallery.git
Cloning into 'ComfyUI-ArtGallery'...
remote: Enumerating objects: 1949, done.
remote: Counting objects: 100% (399/399), done.
remote: Compressing objects: 100% (386/386), done.
error: RPC failed; curl 92 HTTP/2 stream 5 was not closed cleanly: CANCEL (err 8)
error: 7389 bytes of body are still expected
fetch-pack: unexpected disconnect while reading sideband packet
fatal: early EOF
fatal: fetch-pack: invalid index-pack output
PS D:\05Tools\Stable_Diffusion\Blender_ComfyUI\ComfyUI\custom_nodes> git clone https://github.com/ZHO-ZHO-ZHO/ComfyUI-ArtGallery.git
Cloning into 'ComfyUI-ArtGallery'...
remote: Enumerating objects: 1949, done.
remote: Counting objects: 100% (399/399), done.
remote: Compressing objects: 100% (386/386), done.
Receiving objects:  58% (1147/1949), 944.14 MiB | 404.00 KiB/s

E:\Blender_ComfyUI\ComfyUI\custom_nodes\ComfyUI-ArtGallery../../web/extensions/core/uploadImage.js
Traceback (most recent call last):
File "E:\Blender_ComfyUI\ComfyUI\nodes.py", line 1893, in load_custom_node
module_spec.loader.exec_module(module)
File "", line 883, in exec_module
File "", line 241, in call_with_frames_removed
File "E:\Blender_ComfyUI\ComfyUI\custom_nodes\ComfyUI-ArtGallery_init.py", line 56, in
modify_js_file(uploadimg_js_file_path, new_js_content)
File "E:\Blender_ComfyUI\ComfyUI\custom_nodes\ComfyUI-ArtGallery_init_.py", line 6, in modify_js_file
content = file.read()
UnicodeDecodeError: 'gbk' codec can't decode byte 0x80 in position 336: illegal multibyte sequence

Cannot import E:\Blender_ComfyUI\ComfyUI\custom_nodes\ComfyUI-ArtGallery module for custom nodes: 'gbk' codec can't decode byte 0x80 in position 336: illegal multibyte sequence

I see others have had the same issue as I, when trying to load ComfyUI-ArtGallery.
It looks like the files "uploadImage.js" is a 0 byte empty file.

Has anyone any solution to how to install this custom node?

C:\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-ArtGallery../../web/extensions/core/uploadImage.js
Original code block not found.❌
File 'C:\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-ArtGallery../../folder_paths.py' updated successfully.✅
Traceback (most recent call last):
File "C:\ComfyUI_windows_portable\ComfyUI\nodes.py", line 1800, in load_custom_node
module_spec.loader.exec_module(module)
File "", line 940, in exec_module
File "", line 241, in call_with_frames_removed
File "C:\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-ArtGallery_init.py", line 256, in
modify_wedgets_js_file(wedgets_js_file_path, new_wedgets_js_content, new_wedgets_js_content_2)
File "C:\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-ArtGallery_init_.py", line 153, in modify_wedgets_js_file
file.write(content)
File "encodings\cp1252.py", line 19, in encode
UnicodeEncodeError: 'charmap' codec can't encode characters in position 6973-6981: character maps to

Cannot import C:\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-ArtGallery module for custom nodes: 'charmap' codec can't encode characters in position 6973-6981: character maps to
I have tried everything - I believe?

I can't find the node