• openList supports an additional boolean packed. Needed if the PLC has pack variables activated. In this mode, a set(), setMore() or cyclic send will always send all variables in one packed message, instead of sending each variable in an individual UDP packet. Also receive detects if message is packed and handles it correctly
• send port not hardcoded to 1202, can be defined as an optional parameter in client().
• debug: log sent and received messages
• UDP message parts are encoded properly so listId can be larger than 0xF and the message counters increment correctly

To exchange global variables with a CoDeSys-PLC is very easy. Just create a NetworkVariableList (NVL (Sender)) and add your variables to the list. With this package you can receive this UDP-packages and parse them.

To send data to a CoDeSys-PLC, you define a new list with this node-module and use the generated definition to define the network variable list in your PLC as NVL (receiver).

The package is type-save and will hint you on your inputs. You can use it in Typescript and JavaScript. Please be careful with the types when you use it with JavaScript.

Create a new client with the netvar package

import { client } from 'netvar'

const netVar = client()
const netVar1 = client('192.168.0.123') //defaults to port 1202
const netVar2 = client('192.168.0.255', {port: 1202}) //uses the same port for send and receive
const netVar3 = client('192.168.0.123', {port: 1202, send_port: 1302}) //receive from port 1202, send to port 1302
const netVar4 = client('192.168.0.123', {debug: true}) //enable debug messages

Define a new variable list or enter the definition of an existing network variable list. The names do not matter for the communication and can be adjusted to your naming conventions.

Note: If you add a onChange callback you get all updates on this list live from the network.

const list1 = netVar.openList(
  { listId: 1 },
  {
    emergency: t.boolean(0),
    working: t.word(1),
    counter: t.dWord(2, 4242),
  },
)

// more lists
const list2 = netVar.openList({
  {
    listId: 2,
    onChange: (name, value) => console.log(name, value),
    cyclic: true,
    cycleInterval: 2000,
    packed: true, //pack all variables on send (when set() or setMore()). Some PLCs only support this mode
  },
  {
    Active: t.boolean(0),
    Next_Task: t.string(1, 'nut'),
    Speed: t.real(2, Math.PI),
  },
)

Read the value of a property from the list.

This value will be your initial values until you change it or you get different information over the network.

const value = list1.get('working')
console.log(value)

Set a one new value to a specific property from the list or set a number of new values.

The new values are send to the other peers (PLC).

list1.set('working', false)
list1.setMore({
  working: false,
  counter: 42,
})

Build the Definition to set the network variable list configuration on a PLC (receiver)

import fs from 'fs'
fs.writeFileSync('definiting.gvl', list1.definition)

Example:

import { t } from 'netvar'
const vars = {
  test: t.real(1, Math.PI),
}