amiravni / msgeq7_esp8266_ws2812 Goto Github PK

everytime i try to upload equ.html , i get this "Update error: ERROR[10]: Magic byte is wrong, not 0xE9" error. I am using Wemos D1 Mini (Esp8266MOD). it works when i am using
this "http://www.whatimade.today/content/images/2016/04/equ.html" url but having trouble uploading equ.html. Please hel me. P.S. And thanks for this awesome project .

I'm using the Arduino version on an ESP8266 - I've tried a few different variants (standard ESP-12E, D1 Mini and a Witty Cloud board to see if that gave the same behaviour).

Everything flashes successfully, when the ESP8266 is reset the blue activity/wifi LED is lit up solid. There's nothing of any sense on the serial debug, just garbled mess - on all baud rates (I assume 115,200 is the correct serial rate)

Have you seen this before?

I upload MSGEQ7.ino and webPage in a ESP8266-12E module but I can't run setting webpage!
Please help me.
Thanks.

This is what it says...

C:\Users\win7\Documents\Arduino\libraries\WebSockets\src\WebSocketsClient.cpp: In member function 'void WebSocketsClient::begin(const char*, uint16_t, const char*, const char*)':

C:\Users\win7\Documents\Arduino\libraries\WebSockets\src\WebSocketsClient.cpp:65:16: error: 'RANDOM_REG32' was not declared in this scope

 randomSeed(RANDOM_REG32);

I tried several different firmware versions. They all returned right serial feedback like this

ets Jan 8 2013,rst cause:2, boot mode:(3,6)

load 0x4010f000, len 1384, room 16

ets Jan 8 2013,rst cause:2, boot mode:(3,6)

load 0x4010f000, len 1384, room 16
tail 8
chksum 0x2d
csum 0x2d
v09f0c112
~ld

However, after that, the blue onboard LED stays on and nothing else goes on. What should I do?

I tried to blink a LED with those firmware and they all worked fine.