gsutre / netbsd-drmgem Goto Github PK
View Code? Open in Web Editor NEWPorting DRM/GEM from OpenBSD to NetBSD (Intel only)
netbsd-drmgem's People
Contributors
Stargazers
Watchers
netbsd-drmgem's Issues
Hang, then recovery with garbled screen, reboot on X restart
OS: NetBSD-6_BETA amd64 from netbsd-daily 2012-03-21, plus ftp://ftp.netbsd.org/pub/NetBSD/misc/gsutre/drmgem-NetBSD-6.99.3-201203091940Z-amd64/
System: Thinkpad T500 with "Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)"
After running fine for several hours system appeared to hang while page loading on Firefox.
Appeared non responsive with Ctrl+Alt+F1.
After around a minute display switched to black screen with white cursor at top left, system then was able to switch back to X session but with garbled graphics, and then switch back to constty with correct display.
Restarting xdm rebooted machine
Time to integrate into NetBSD 6 (?)
Dear Gregoire,
I've be using netbsd-drmgem code with netbsd 6 BETA kernel and it works perfectly, with no sign of instability, even with VGA output.
Considering my interest to expand NetBSD to as much machines/platforms as possible, don't you think it would already be possible to integrate the code into the next release?
I remember you telling me that you found some instability with it. I'm not too much skilled, but if you need any help, please let me know.
Thanks in advance,
Arthur
Console not restored with genfb(4) on Ironlake
On a Core i5 laptop, the framebuffer console (genfb(4)) is not restored when the X server exits. Instead, a still image with vertical dotted lines is displayed. The X server can be launched again from the console (by typing startx blindly), and the display gets back as expected (under X).
On an older i386 laptop (915GM), everything works fine.
dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.99.14 (GENERIC) #0: Fri Nov 2 18:25:44 CET 2012
instsoft@yosemite:/tmp/netbsd-drmgem.usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8117 MB
avail memory = 7867 MB
timecounter: Timecounters tick every 10.000 msec
No bootinfo commands at boot
RTC BIOS diagnostic error 0x30
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.6 @ 0xf2460 (66 entries)
Dell Inc. Latitude E4310 (0001)
mainbus0 (root)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40, using 32 (20110623/tbfadt-517)
cpu0 at mainbus0 apid 0cpu0: 8 page colors
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
timecounter: Timecounter "lapic" frequency 133092329 Hz quality -100
: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu0: PAT enabled
cpu1 at mainbus0 apid 4cpu1: 2 page colors
x86_ipi_init: ESR 00000040
: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu1: PAT enabled
cpu2 at mainbus0 apid 1cpu2: 2 page colors
: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu2: PAT enabled
cpu3 at mainbus0 apid 5cpu3: 2 page colors
: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu3: PAT enabled
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId , AslId
ioapic0 reenabling
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpi0: ACPI-Fast 24-bit timer
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (ECDV, PNP0C09-0): io 0x930,0x934
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, DLL0410) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
A_CC (SMO8800) at acpi0 not configured
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpivga0: capabilities: _DOS _DOD
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout0: capabilities: _DCS _DGS _DSS
acpiout1 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1: capabilities: _BCL _BCM _BQC _DCS _DGS _DSS
acpiout1: brightness levels: 0 6 13 20 26 33 40 46 53 60 66 73 80 86 93 100
acpiout2 at acpivga0 (DVI, 0x0302): ACPI Display Output Device
acpiout2: capabilities: _DCS _DGS _DSS
acpiout3 at acpivga0 (DVI2, 0x0303): ACPI Display Output Device
acpiout3: capabilities: _DCS _DGS _DSS
acpiout4 at acpivga0 (DP, 0x0300): ACPI Display Output Device
acpiout4: capabilities: _DCS _DGS _DSS
acpiout5 at acpivga0 (DP2, 0x0301): ACPI Display Output Device
acpiout5: capabilities: _DCS _DGS _DSS
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
acpivga0: 0x0302 (acpiout2): Unknown Output Device, head 0
acpivga0: 0x0303 (acpiout3): Unknown Output Device, head 0
acpivga0: 0x0300 (acpiout4): Unknown Output Device, head 0
acpivga0: 0x0301 (acpiout5): Unknown Output Device, head 0
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: SMP LION rechargeable battery
acpibat0: model number DELL Y266P09, serial number 132
acpibat0: granularity: low->warn 0.028 Ah, warn->full 0.028 Ah
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
acpiwmi0: {8D9DDCBC-A997-11DA-B012-B622A1EF5492} oid 4141 count 01 flags 00
acpiwmi0: {A80593CE-A997-11DA-B012-B622A1EF5492} oid 4142 count 01 flags 02
acpiwmi0: {9DBB5994-A997-11DA-B012-B622A1EF5492} oid 00D0 count 01 flags 08
acpiwmi0: {A3776CE0-1E88-11DB-A98B-0800200C9A66} oid 4342 count 01 flags 00
acpiwmi0: {05901221-D566-11D1-B2F0-00A0C9062910} oid 4F4D count 01 flags 00
wmidell0 at acpiwmi0: Dell WMI mappings
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: synaptics_probe: Not synaptics.
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0044 (rev. 0x02)
agp0 at pchb0: detected 32764k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
genfb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0046 (rev. 0x02)
genfb0: recycling existing fb mapping at ffff80008e432000
genfb0: framebuffer at 0xe0000000, size 1024x768, depth 8, stride 1024
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
inteldrm has not been converted to device_t
inteldrm0 at genfb0: ioapic0 pin 16
drmdev has not been converted to device_t
drmdev0 at inteldrm0
wm0 at pci0 dev 25 function 0: PCH LAN (82577LM) Controller (rev. 0x05)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 5c:26:0a:13:8f:e1
ihphy0 at wm0 phy 2: i82577 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
usb0: WARNING: power management not supported
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0 vendor 0x111D product 0x7605 nid 0x01: Sigmatel 92HD81B1X5
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
nid=0D [pin: Speaker (Built-In)]
nid=13 [audio output] [source: dac]
nid=0B [pin: HP Out (Black Jack)]
nid=13 [audio output] [source: dac]
hdafg0: ADC01 2ch: Mic In [Jack]
nid=0A [pin: Mic In (Black Jack)]
nid=0F [pin: Mic In (Black Jack)]
hdafg0: ADC02 2ch: Mic In [Built-In]
nid=11 [pin: Mic In (Built-In)]
hdafg0: DAC03 2ch: Speaker [Jack]
nid=0E [pin: Speaker (Black Jack)]
nid=14 [audio output] [source: dac]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0 vendor 0x8086 product 0x2804 nid 0x01: Intel G45 HDMI
hdafg1: DP00 8ch: Digital Out [Jack]
nid=04 [pin: Digital Out (Jack)]
nid=02 [audio output] [source: dac]
hdafg1: DP01 8ch: Digital Out [Jack]
nid=05 [pin: Digital Out (Jack)]
nid=03 [audio output] [source: dac]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x3b42 (rev. 0x05)
ppb0: PCI Express 2.0 x1 @ 2.5Gb/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x3b44 (rev. 0x05)
ppb1: PCI Express 2.0 x1 @ 2.5Gb/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 0x8086 product 0x422b (rev. 0x35)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 3T3R, MoW, address 00:24:d7:55:88:5c
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x3b46 (rev. 0x05)
ppb2: PCI Express 2.0 x1 @ 2.5Gb/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc0 at pci3 dev 0 function 0: vendor 0x1180 product 0xe822 (rev. 0x01)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: SD Host Specification 1.0, rev.4
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x3b48 (rev. 0x05)
ppb3: PCI Express 2.0 x1 @ 2.5Gb/s
ppb3: disabling notification events
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 17
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
usb1: WARNING: power management not supported
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xa5)
pci5 at ppb4 bus 10
pci5: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3b0f (rev. 0x05)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x3b2f (rev. 0x05)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xe720ff65
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x3b30 (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x200114e4 rev 0x20
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
pci6 at mainbus0 bus 63
pci6: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb1 at pci6 dev 0 function 0: vendor 0x8086 product 0x2c62 (rev. 0x02)
pchb2 at pci6 dev 0 function 1: vendor 0x8086 product 0x2d01 (rev. 0x02)
pchb3 at pci6 dev 2 function 0: vendor 0x8086 product 0x2d10 (rev. 0x02)
pchb4 at pci6 dev 2 function 1: vendor 0x8086 product 0x2d11 (rev. 0x02)
pchb5 at pci6 dev 2 function 2: vendor 0x8086 product 0x2d12 (rev. 0x02)
pchb6 at pci6 dev 2 function 3: vendor 0x8086 product 0x2d13 (rev. 0x02)
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 3 us, pow 1000 mW
acpicpu0: C2: FFH, lat 205 us, pow 500 mW
acpicpu0: C3: FFH, lat 245 us, pow 350 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 25000 mW, 2533 MHz
acpicpu0: P1: FFH, lat 10 us, pow 23390 mW, 2399 MHz
acpicpu0: P2: FFH, lat 10 us, pow 21835 mW, 2266 MHz
acpicpu0: P3: FFH, lat 10 us, pow 20334 mW, 2133 MHz
acpicpu0: P4: FFH, lat 10 us, pow 18817 mW, 1999 MHz
acpicpu0: P5: FFH, lat 10 us, pow 17351 mW, 1866 MHz
acpicpu0: P6: FFH, lat 10 us, pow 15937 mW, 1733 MHz
acpicpu0: P7: FFH, lat 10 us, pow 14528 mW, 1599 MHz
acpicpu0: P8: FFH, lat 10 us, pow 13163 mW, 1466 MHz
acpicpu0: P9: FFH, lat 10 us, pow 11835 mW, 1333 MHz
acpicpu0: P10: FFH, lat 10 us, pow 10512 mW, 1199 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu0: id 1, lapic id 0, cap 0x0bfd, flags 0x0018e297
acpicpu0: P-state coordination: 4 CPUs, domain 0, type HW_ALL
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu1: id 2, lapic id 4, cap 0x0bfd, flags 0x0018e297
acpicpu1: P-state coordination: 4 CPUs, domain 0, type HW_ALL
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
acpicpu2: id 3, lapic id 1, cap 0x0bfd, flags 0x0018e297
acpicpu2: P-state coordination: 4 CPUs, domain 0, type HW_ALL
acpicpu3 at cpu3: ACPI CPU
acpicpu3: id 4, lapic id 5, cap 0x0bfd, flags 0x0018e297
acpicpu3: P-state coordination: 4 CPUs, domain 0, type HW_ALL
Initializing SSP: 43eed83b03fce4ed 4448d3f439bbd192 909df377268351d5 f94ae108de88a0b5 69ee8034bee20f62 afe78681650d4293 49c30be47a73ac3c 2ea22b43d0d99b06
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu1: TSC skew=4 drift=0
cpu2: TSC skew=-6 drift=-2
cpu3: TSC skew=-8 drift=6
cpu1: running
cpu2: running
cpu3: running
TSC not known safe on this CPU
timecounter: Timecounter "TSC" frequency 2527169840 Hz quality -100
acpicpu3: ACPI CPUs started
acpiacad0: AC adapter online.
acpiacad0: AC adapter connected
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
wmidell0: unknown key 0x00 for event 0xD0
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0:
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0 at uhub3 port 8
uvideo0 at uhub2 port 4 configuration 1 interface 0: CN0F5CWW7866409802FKA01 Laptop_Integrated_Webcam_2M, rev 2.00/a7.20, addr 3
video0 at uvideo0: CN0F5CWW7866409802FKA01 Laptop_Integrated_Webcam_2M, rev 2.00/a7.20, addr 3
ugen0: Broadcom Corp 5880, rev 1.10/1.01, addr 3
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
raidattach: Asked for 8 units
Kernelized RAIDframe activated
pad: requested 1 units
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
Searching for RAID components...
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
iwn0: radio is disabled by hardware switch
iwn0: cannot assign link-local address
iwn0: radio is disabled by hardware switch
iwn0: radio is disabled by hardware switch
iwn0: cannot assign link-local address
cprng sysctl: WARNING pseudorandom rekeying.
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
wmidell0: unknown key 0x00 for event 0xD0
wmidell0: unknown key 0x00 for event 0xD0
cprng kernel: WARNING pseudorandom rekeying.
set{u,g}id pid 815 (gnome-pty-helper) was invoked by uid 1001 ppid 203 (Terminal) with fd 2 closed
X log
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 52.146] X Protocol Version 11, Revision 0
[ 52.146] Build Operating System: NetBSD/amd64 -
[ 52.146] Current Operating System: NetBSD yosemite 6.99.14 NetBSD 6.99.14 (GENERIC) #0: Fri Nov 2 18:25:44 CET 2012 instsoft@yosemite:/tmp/netbsd-drmgem.usr/src/sys/arch/amd64/compile/GENERIC amd64
[ 52.146] Build Date: 01 August 2011 01:01:00AM
[ 52.146]
[ 52.146] Current version of pixman: 0.23.2
[ 52.146] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 52.146] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 52.146] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 3 01:00:02 2012
[ 52.148] (II) Loader magic: 0x834c60
[ 52.148] (II) Module ABI versions:
[ 52.148] X.Org ANSI C Emulation: 0.4
[ 52.148] X.Org Video Driver: 10.0
[ 52.148] X.Org XInput driver : 12.2
[ 52.148] X.Org Server Extension : 5.0
[ 52.156] (--) PCI:*(0:0:2:0) 8086:0046:1028:0410 rev 2, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x000060b0/8
[ 52.157] (==) Using default built-in configuration (12 lines)
[ 52.157] (==) --- Start of built-in configuration ---
[ 52.157] Section "Device"
[ 52.157] Identifier "Builtin Default intel Device 0"
[ 52.157] Driver "intel"
[ 52.157] EndSection
[ 52.157] Section "Screen"
[ 52.157] Identifier "Builtin Default intel Screen 0"
[ 52.157] Device "Builtin Default intel Device 0"
[ 52.157] EndSection
[ 52.157] Section "ServerLayout"
[ 52.157] Identifier "Builtin Default Layout"
[ 52.157] Screen "Builtin Default intel Screen 0"
[ 52.157] EndSection
[ 52.157] (==) --- End of built-in configuration ---
[ 52.157] (==) ServerLayout "Builtin Default Layout"
[ 52.157] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 52.157] (**) | |-->Monitor ""
[ 52.158] (**) | |-->Device "Builtin Default intel Device 0"
[ 52.158] (==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
[ 52.158] (==) Not automatically adding devices
[ 52.158] (==) Not automatically enabling devices
[ 52.161] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 52.161] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 52.161] (==) |-->Input Device ""
[ 52.161] (==) |-->Input Device ""
[ 52.161] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 52.161] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 52.161] (II) LoadModule: "extmod"
[ 52.165] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 52.175] (II) Module extmod: vendor="X.Org Foundation"
[ 52.175] compiled for 1.10.3, module version = 1.0.0
[ 52.175] Module class: X.Org Server Extension
[ 52.175] ABI class: X.Org Server Extension, version 5.0
[ 52.175] (II) Loading extension MIT-SCREEN-SAVER
[ 52.175] (II) Loading extension XFree86-VidModeExtension
[ 52.175] (II) Loading extension XFree86-DGA
[ 52.175] (II) Loading extension DPMS
[ 52.175] (II) Loading extension XVideo
[ 52.175] (II) Loading extension XVideo-MotionCompensation
[ 52.175] (II) Loading extension X-Resource
[ 52.175] (II) LoadModule: "dbe"
[ 52.176] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 52.177] (II) Module dbe: vendor="X.Org Foundation"
[ 52.177] compiled for 1.10.3, module version = 1.0.0
[ 52.177] Module class: X.Org Server Extension
[ 52.177] ABI class: X.Org Server Extension, version 5.0
[ 52.177] (II) Loading extension DOUBLE-BUFFER
[ 52.177] (II) LoadModule: "glx"
[ 52.178] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 52.182] (II) Module glx: vendor="X.Org Foundation"
[ 52.183] compiled for 1.10.3, module version = 1.0.0
[ 52.183] ABI class: X.Org Server Extension, version 5.0
[ 52.183] (==) AIGLX enabled
[ 52.183] (II) Loading extension GLX
[ 52.183] (II) LoadModule: "record"
[ 52.184] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 52.185] (II) Module record: vendor="X.Org Foundation"
[ 52.185] compiled for 1.10.3, module version = 1.13.0
[ 52.185] Module class: X.Org Server Extension
[ 52.185] ABI class: X.Org Server Extension, version 5.0
[ 52.185] (II) Loading extension RECORD
[ 52.185] (II) LoadModule: "dri"
[ 52.186] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 52.187] (II) Module dri: vendor="X.Org Foundation"
[ 52.187] compiled for 1.10.3, module version = 1.0.0
[ 52.187] ABI class: X.Org Server Extension, version 5.0
[ 52.188] (II) Loading extension XFree86-DRI
[ 52.188] (II) LoadModule: "dri2"
[ 52.189] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 52.189] (II) Module dri2: vendor="X.Org Foundation"
[ 52.189] compiled for 1.10.3, module version = 1.2.0
[ 52.189] ABI class: X.Org Server Extension, version 5.0
[ 52.190] (II) Loading extension DRI2
[ 52.190] (II) LoadModule: "intel"
[ 52.190] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 52.195] (II) Module intel: vendor="X.Org Foundation"
[ 52.195] compiled for 1.10.3, module version = 2.12.0
[ 52.195] Module class: X.Org Video Driver
[ 52.195] ABI class: X.Org Video Driver, version 10.0
[ 52.196] (II) LoadModule: "mouse"
[ 52.196] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 52.198] (II) Module mouse: vendor="X.Org Foundation"
[ 52.198] compiled for 1.10.3, module version = 1.7.1
[ 52.198] Module class: X.Org XInput Driver
[ 52.198] ABI class: X.Org XInput driver, version 12.2
[ 52.198] (II) LoadModule: "kbd"
[ 52.198] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 52.199] (II) Module kbd: vendor="X.Org Foundation"
[ 52.199] compiled for 1.10.3, module version = 1.6.0
[ 52.199] Module class: X.Org XInput Driver
[ 52.199] ABI class: X.Org XInput driver, version 12.2
[ 52.199] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2),
Ivybridge Server (GT1), Ivybridge Server (GT2)
[ 52.200] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 52.200] (--) using VT number 5
[ 52.232] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 52.233] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 52.233] (II) Loading sub module "vgahw"
[ 52.233] (II) LoadModule: "vgahw"
[ 52.235] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 52.236] (II) Module vgahw: vendor="X.Org Foundation"
[ 52.236] compiled for 1.10.3, module version = 0.1.0
[ 52.236] ABI class: X.Org Video Driver, version 10.0
[ 52.236] (II) Loading sub module "ramdac"
[ 52.236] (II) LoadModule: "ramdac"
[ 52.236] (II) Module "ramdac" already built-in
[ 52.236] drmOpenDevice: node name is /dev/dri/card0
[ 52.236] drmOpenDevice: open result is 15, (OK)
[ 52.236] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 52.236] drmOpenDevice: node name is /dev/dri/card0
[ 52.236] drmOpenDevice: open result is 15, (OK)
[ 52.236] drmOpenByBusid: drmOpenMinor returns 15
[ 52.236] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 52.236] (II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
[ 52.236] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 52.236] (==) intel(0): RGB weight 888
[ 52.236] (==) intel(0): Default visual is TrueColor
[ 52.236] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 52.236] (--) intel(0): Chipset: "Arrandale"
[ 52.236] (--) intel(0): Linear framebuffer at 0xE0000000
[ 52.236] (--) intel(0): IO registers at addr 0xF0000000 size 4194304
[ 52.236] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 52.236] (II) intel(0): No SDVO device is found in VBT
[ 52.238] (II) intel(0): 2 display pipes available.
[ 52.238] (II) Loading sub module "ddc"
[ 52.238] (II) LoadModule: "ddc"
[ 52.238] (II) Module "ddc" already built-in
[ 52.238] (II) Loading sub module "i2c"
[ 52.238] (II) LoadModule: "i2c"
[ 52.238] (II) Module "i2c" already built-in
[ 52.239] (II) intel(0): Output VGA has no monitor section
[ 52.240] (II) intel(0): Output eDP has no monitor section
[ 52.241] (II) intel(0): I2C bus "DPDDC-A" initialized.
[ 52.295] (II) intel(0): eDP output detected
[ 52.295] (II) intel(0): Output HDMI-3 has no monitor section
[ 52.295] (II) intel(0): I2C bus "HDMIB" initialized.
[ 52.295] (II) intel(0): HDMI-3 output detected
[ 52.295] (II) intel(0): Output DP-B has no monitor section
[ 52.295] (II) intel(0): I2C bus "DPDDC-B" initialized.
[ 52.335] (II) intel(0): DP-B output detected
[ 52.335] (II) intel(0): Output HDMI-4 has no monitor section
[ 52.335] (II) intel(0): I2C bus "HDMIC" initialized.
[ 52.335] (II) intel(0): HDMI-4 output detected
[ 52.335] (II) intel(0): Output DP-C has no monitor section
[ 52.335] (II) intel(0): I2C bus "DPDDC-C" initialized.
[ 52.375] (II) intel(0): DP-C output detected
[ 52.415] (II) intel(0): EDID for output VGA
[ 52.416] (II) intel(0): I2C device "DPDDC-A:ddc2" registered at address 0xA0.
[ 55.077] (II) intel(0): EDID for output eDP
[ 55.077] (II) intel(0): Manufacturer: LGD Model: 24d Serial#: 0
[ 55.077] (II) intel(0): Year: 2010 Week: 0
[ 55.077] (II) intel(0): EDID Version: 1.4
[ 55.077] (II) intel(0): Digital Display Input
[ 55.077] (II) intel(0): 6 bits per channel
[ 55.077] (II) intel(0): Digital interface is DisplayPort
[ 55.077] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 17
[ 55.077] (II) intel(0): Gamma: 2.20
[ 55.077] (II) intel(0): No DPMS capabilities specified
[ 55.077] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 55.077] (II) intel(0): First detailed timing is preferred mode
[ 55.077] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 55.077] (II) intel(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
[ 55.077] (II) intel(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
[ 55.077] (II) intel(0): Manufacturer's mask: 0
[ 55.077] (II) intel(0): Supported detailed timing:
[ 55.077] (II) intel(0): clock: 75.5 MHz Image Size: 294 x 166 mm
[ 55.077] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1581 h_border: 0
[ 55.077] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 55.077] (II) intel(0): Supported detailed timing:
[ 55.077] (II) intel(0): clock: 50.3 MHz Image Size: 294 x 166 mm
[ 55.077] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1576 h_border: 0
[ 55.077] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 55.077] (II) intel(0): DR347133WH1
[ 55.077] (II) intel(0): Unknown vendor-specific block 0
[ 55.077] (II) intel(0): EDID (in hex):
[ 55.078] (II) intel(0): 00ffffffffffff0030e44d0200000000
[ 55.078] (II) intel(0): 00140104951d117802d5d59659568c27
[ 55.078] (II) intel(0): 1f505400000001010101010101010101
[ 55.078] (II) intel(0): 0101010101017e1d56d7500019303020
[ 55.078] (II) intel(0): 360026a61000001aa61356d250001930
[ 55.078] (II) intel(0): 3020360026a61000001a000000fe0044
[ 55.078] (II) intel(0): 52333437803133335748310a00000000
[ 55.078] (II) intel(0): 00004131160000000009010a20200006
[ 55.078] (II) intel(0): EDID vendor "LGD", prod id 589
[ 55.078] (II) intel(0): Printing probed modes for output eDP
[ 55.078] (II) intel(0): Modeline "1366x768"x60.2 75.50 1366 1414 1446 1581 768 771 777 793 +hsync -vsync (47.8 kHz)
[ 55.078] (II) intel(0): Modeline "1366x768"x40.2 50.30 1366 1414 1446 1576 768 771 777 793 +hsync -vsync (31.9 kHz)
[ 55.078] (II) intel(0): I2C device "HDMIB:ddc2" registered at address 0xA0.
[ 55.082] (II) intel(0): EDID for output HDMI-3
[ 55.082] (II) intel(0): EDID for output HDMI-3
[ 55.097] (II) intel(0): EDID for output DP-B
[ 55.097] (II) intel(0): I2C device "HDMIC:ddc2" registered at address 0xA0.
[ 55.101] (II) intel(0): EDID for output HDMI-4
[ 55.101] (II) intel(0): EDID for output HDMI-4
[ 55.117] (II) intel(0): EDID for output DP-C
[ 55.117] (II) intel(0): Output VGA disconnected
[ 55.117] (II) intel(0): Output eDP connected
[ 55.117] (II) intel(0): Output HDMI-3 disconnected
[ 55.117] (II) intel(0): Output DP-B disconnected
[ 55.117] (II) intel(0): Output HDMI-4 disconnected
[ 55.117] (II) intel(0): Output DP-C disconnected
[ 55.117] (II) intel(0): Using exact sizes for initial modes
[ 55.117] (II) intel(0): Output eDP using initial mode 1366x768
[ 55.117] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 55.118] (II) intel(0): detected 512 kB GTT.
[ 55.118] (II) intel(0): detected 32764 kB stolen memory.
[ 55.118] (==) intel(0): video overlay key set to 0x101fe
[ 55.118] (==) intel(0): DPI set to (96, 96)
[ 55.118] (II) Loading sub module "fb"
[ 55.118] (II) LoadModule: "fb"
[ 55.119] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 55.121] (II) Module fb: vendor="X.Org Foundation"
[ 55.121] compiled for 1.10.3, module version = 1.0.0
[ 55.121] ABI class: X.Org ANSI C Emulation, version 0.4
[ 55.121] (II) Loading sub module "int10"
[ 55.121] (II) LoadModule: "int10"
[ 55.122] (II) Loading /usr/X11R7/lib/modules/libint10.so
[ 55.124] (II) Module int10: vendor="X.Org Foundation"
[ 55.124] compiled for 1.10.3, module version = 1.0.0
[ 55.124] ABI class: X.Org Video Driver, version 10.0
[ 55.124] (WW) intel(0): remove MTRR a0000 - c0000
[ 55.126] (WW) intel(0): remove MTRR c0000 - 100000
[ 55.127] (II) intel(0): Primary V_BIOS segment is: 0xc000
[ 55.127] (WW) intel(0): remove MTRR 0 - 1000
[ 55.130] (--) intel(0): Console VGA mode is 0x105
[ 55.130] (==) Depth 24 pixmap format is 32 bpp
[ 55.131] (II) intel(0): Kernel reported 1006592 total, 0 used
[ 55.131] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available
[ 55.131] (II) intel(0): [DRI2] Setup complete
[ 55.131] (II) intel(0): [DRI2] DRI driver: i965
[ 55.131] (**) intel(0): Framebuffer tiled
[ 55.131] (**) intel(0): Pixmaps tiled
[ 55.131] (**) intel(0): 3D buffers tiled
[ 55.131] (**) intel(0): SwapBuffers wait enabled
[ 55.190] (==) intel(0): VideoRam: 262144 KB
[ 55.190] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 55.299] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 55.299] (WW) intel(0): remove MTRR a0000 - b0000
[ 55.303] (II) UXA(0): Driver registered support for the following operations:
[ 55.303] (II) solid
[ 55.303] (II) copy
[ 55.303] (II) composite (RENDER acceleration)
[ 55.303] (II) put_image
[ 55.303] (II) get_image
[ 55.303] (==) intel(0): Backing store disabled
[ 55.303] (==) intel(0): Silken mouse enabled
[ 55.304] (II) intel(0): Initializing HW Cursor
[ 56.558] Plane disable
[ 56.558] Pipe disable
[ 56.578] PFIT disable
[ 56.578] FDI TX disable
[ 56.578] FDI RX disable
[ 56.598] FDI TX train 1 preload
[ 56.598] FDI RX train 1 preload
[ 56.618] Transcoder disable
[ 56.638] PCH DPLL disable
[ 56.638] FDI RX PLL PCD disable
[ 56.638] FDI TX PLL disable 00024040
[ 56.658] FDI RX PLL disable 00044000
[ 56.678] DPMS off done
[ 56.698] Plane disable
[ 56.698] Pipe disable
[ 56.718] PFIT disable
[ 56.718] FDI TX disable
[ 56.718] FDI RX disable
[ 56.738] FDI TX train 1 preload
[ 56.738] FDI RX train 1 preload
[ 56.758] Transcoder disable
[ 56.778] PCH DPLL disable
[ 56.778] FDI RX PLL PCD disable
[ 56.778] FDI TX PLL disable 00004040
[ 56.798] FDI RX PLL disable 00044000
[ 56.818] DPMS off done
[ 56.881] (II) intel(0): Fixed memory allocation layout:
[ 56.881] (II) intel(0): 0x01fff000: end of stolen memory
[ 56.881] (II) intel(0): 0x01fff000-0x0fffffff: DRI memory manager (229380 kB)
[ 56.881] (II) intel(0): 0x10000000: end of aperture
[ 56.881] (II) intel(0): BO memory allocation layout:
[ 56.881] (II) intel(0): 0x01fff000: start of memory manager
[ 56.881] (II) intel(0): 0x02776000-0x0277ffff: HW cursors (40 kB)
[ 56.881] (II) intel(0): 0x10000000: end of memory manager
[ 57.289] Plane disable
[ 57.289] Pipe disable
[ 57.309] PFIT disable
[ 57.309] FDI TX disable
[ 57.309] FDI RX disable
[ 57.329] FDI TX train 1 preload
[ 57.329] FDI RX train 1 preload
[ 57.349] Transcoder disable
[ 57.369] PCH DPLL disable
[ 57.369] FDI RX PLL PCD disable
[ 57.369] FDI TX PLL disable 00024040
[ 57.389] FDI RX PLL disable 00044000
[ 57.409] DPMS off done
[ 57.429] Plane disable
[ 57.429] Pipe disable
[ 57.449] PFIT disable
[ 57.449] FDI TX disable
[ 57.449] FDI RX disable
[ 57.469] FDI TX train 1 preload
[ 57.469] FDI RX train 1 preload
[ 57.489] Transcoder disable
[ 57.509] PCH DPLL disable
[ 57.509] FDI RX PLL PCD disable
[ 57.509] FDI TX PLL disable 00004040
[ 57.529] FDI RX PLL disable 00044000
[ 57.549] DPMS off done
[ 57.899] Plane disable
[ 57.899] Pipe disable
[ 57.919] PFIT disable
[ 57.919] FDI TX disable
[ 57.919] FDI RX disable
[ 57.939] FDI TX train 1 preload
[ 57.939] FDI RX train 1 preload
[ 57.959] Transcoder disable
[ 57.979] PCH DPLL disable
[ 57.979] FDI RX PLL PCD disable
[ 57.979] FDI TX PLL disable 00024040
[ 57.999] FDI RX PLL disable 00044000
[ 58.019] DPMS off done
[ 58.039] (WW) intel(0): Chosen PLL clock of 216.0 Mhz more than 2% away from desired 270.0 Mhz
[ 58.039] bpp 6
[ 58.239] Pipe enable
[ 58.259] Plane enable
[ 58.279] LUT load
[ 58.279] DPMS on done
[ 58.830] Plane disable
[ 58.830] Pipe disable
[ 58.850] PFIT disable
[ 58.850] FDI TX disable
[ 58.850] FDI RX disable
[ 58.870] FDI TX train 1 preload
[ 58.870] FDI RX train 1 preload
[ 58.890] Transcoder disable
[ 58.910] PCH DPLL disable
[ 58.910] FDI RX PLL PCD disable
[ 58.910] FDI TX PLL disable 00004040
[ 58.930] FDI RX PLL disable 00044000
[ 58.950] DPMS off done
[ 58.970] (II) intel(0): Output configuration:
[ 58.970] (II) intel(0): Pipe A is on
[ 58.970] (II) intel(0): Display plane A is now enabled and connected to pipe A.
[ 58.970] (II) intel(0): Pipe B is off
[ 58.970] (II) intel(0): Display plane B is now disabled and connected to pipe B.
[ 58.970] (II) intel(0): Output VGA is connected to pipe none
[ 58.970] (II) intel(0): Output eDP is connected to pipe A
[ 58.970] (II) intel(0): Output HDMI-3 is connected to pipe none
[ 58.970] (II) intel(0): Output DP-B is connected to pipe none
[ 58.970] (II) intel(0): Output HDMI-4 is connected to pipe none
[ 58.970] (II) intel(0): Output DP-C is connected to pipe none
[ 58.970] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 58.972] (==) intel(0): DPMS enabled
[ 58.972] (==) intel(0): Intel XvMC decoder enabled
[ 58.973] (II) intel(0): Set up textured video
[ 58.974] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 58.974] (II) intel(0): direct rendering: DRI2 Enabled
[ 58.974] (--) RandR disabled
[ 58.974] (II) Initializing built-in extension Generic Event Extension
[ 58.974] (II) Initializing built-in extension SHAPE
[ 58.974] (II) Initializing built-in extension MIT-SHM
[ 58.974] (II) Initializing built-in extension XInputExtension
[ 58.974] (II) Initializing built-in extension XTEST
[ 58.974] (II) Initializing built-in extension BIG-REQUESTS
[ 58.974] (II) Initializing built-in extension SYNC
[ 58.974] (II) Initializing built-in extension XKEYBOARD
[ 58.974] (II) Initializing built-in extension XC-MISC
[ 58.974] (II) Initializing built-in extension SECURITY
[ 58.974] (II) Initializing built-in extension XINERAMA
[ 58.974] (II) Initializing built-in extension XFIXES
[ 58.974] (II) Initializing built-in extension XFree86-Bigfont
[ 58.974] (II) Initializing built-in extension RENDER
[ 58.974] (II) Initializing built-in extension RANDR
[ 58.974] (II) Initializing built-in extension COMPOSITE
[ 58.974] (II) Initializing built-in extension DAMAGE
[ 59.008] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 59.008] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 59.008] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 59.008] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 59.008] (II) AIGLX: Loaded and initialized /usr/X11R7/lib/modules/dri/i965_dri.so
[ 59.008] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 59.009] (II) intel(0): Setting screen physical size to 361 x 203
[ 59.139] (II) Using input driver 'mouse' for ''
[ 59.139] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 59.140] (**) Option "CorePointer"
[ 59.140] (**) : always reports core events
[ 59.140] (WW) : No Device specified, looking for one...
[ 59.183] (II) : found Device "/dev/wsmouse"
[ 59.191] (--) : Device: "/dev/wsmouse"
[ 59.191] (==) : Protocol: "WSMouse"
[ 59.191] (**) : always reports core events
[ 59.191] (**) Option "Device" "/dev/wsmouse"
[ 59.202] (==) : Emulate3Buttons, Emulate3Timeout: 50
[ 59.203] (**) : ZAxisMapping: buttons 4 and 5
[ 59.203] (**) : Buttons: 9
[ 59.203] (II) XINPUT: Adding extended input device "" (type: MOUSE)
[ 59.203] (**) : (accel) keeping acceleration scheme 1
[ 59.203] (**) : (accel) acceleration profile 0
[ 59.203] (**) : (accel) acceleration factor: 2.000
[ 59.203] (**) : (accel) acceleration threshold: 4
[ 59.209] (II) Using input driver 'kbd' for ''
[ 59.209] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 59.209] (**) Option "CoreKeyboard"
[ 59.209] (**) : always reports core events
[ 59.209] (**) : always reports core events
[ 59.209] (**) Option "Protocol" "standard"
[ 59.209] (**) Option "XkbRules" "base"
[ 59.209] (**) Option "XkbModel" "pc105"
[ 59.210] (**) Option "XkbLayout" "us"
[ 59.210] (II) XINPUT: Adding extended input device "" (type: KEYBOARD)
[ 59.250] Pipe enable
[ 59.250] Plane enable
[ 59.250] LUT load
[ 59.250] DPMS on done
[ 107.089] (II) UnloadModule: "mouse"
[ 107.128] (II) Unloading mouse
[ 107.128] (II) UnloadModule: "kbd"
[ 107.128] (II) Unloading kbd
[ 107.143] Pipe enable
[ 107.143] Plane enable
[ 107.143] LUT load
[ 107.143] DPMS on done
Xen dom0 support?
Hello Gregoire,
I've tried to run NetBSD as Xen dom0 on my machine, with your patch. I've added the following lines to XEN_DOM0 configuration file:
# New DRM/GEM driver ported from OpenBSD (Intel only)
inteldrm* at drm?
drmdev* at inteldrm?
and built up a new kernel. When booted it, got the following:
Is there any chance to get it working in Xen dom0? I use xentools/kernel 4.2 on amd64 (current).
Thanks,
Dmitry
garbled display with genfb(4) on Ironlake
On a Core i5 laptop (Arrandale), booting with genfb(4) console and then launching X gives a garbled display (only the cursor is fine). After killing X, the VT swicth is performed but the console is garbled as well.
However, on an older i386 laptop (915GM), everything works fine.
/var/log/Xorg.0.log (Arrandale)
[ 36.861]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 36.862] X Protocol Version 11, Revision 0
[ 36.862] Build Operating System: NetBSD/amd64 -
[ 36.862] Current Operating System: NetBSD yosemite 5.99.52 NetBSD 5.99.52 (GENERIC) #0: Sat Jun 11 11:23:19 CEST 2011 instsoft@yosemite:/tmp/usr/src/sys/arch/amd64/compile/GENERIC amd64
[ 36.862] Build Date: 23 November 2010 01:33:05AM
[ 36.862]
[ 36.862] Current version of pixman: 0.21.4
[ 36.863] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 36.863] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 36.863] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 11 11:29:53 2011
[ 36.865] (II) Loader magic: 0x815080
[ 36.865] (II) Module ABI versions:
[ 36.865] X.Org ANSI C Emulation: 0.4
[ 36.866] X.Org Video Driver: 8.0
[ 36.866] X.Org XInput driver : 11.0
[ 36.866] X.Org Server Extension : 4.0
[ 36.876] (--) PCI:*(0:0:2:0) 8086:0046:1028:0410 rev 2, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x000060b0/8
[ 36.877] (==) Using default built-in configuration (12 lines)
[ 36.877] (==) --- Start of built-in configuration ---
[ 36.877] Section "Device"
[ 36.877] Identifier "Builtin Default intel Device 0"
[ 36.877] Driver "intel"
[ 36.877] EndSection
[ 36.877] Section "Screen"
[ 36.877] Identifier "Builtin Default intel Screen 0"
[ 36.877] Device "Builtin Default intel Device 0"
[ 36.877] EndSection
[ 36.877] Section "ServerLayout"
[ 36.877] Identifier "Builtin Default Layout"
[ 36.877] Screen "Builtin Default intel Screen 0"
[ 36.877] EndSection
[ 36.877] (==) --- End of built-in configuration ---
[ 36.877] (==) ServerLayout "Builtin Default Layout"
[ 36.877] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 36.877] (**) | |-->Monitor ""
[ 36.878] (**) | |-->Device "Builtin Default intel Device 0"
[ 36.878] (==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
[ 36.878] (==) Not automatically adding devices
[ 36.878] (==) Not automatically enabling devices
[ 36.895] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 36.895] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 36.895] (==) |-->Input Device ""
[ 36.895] (==) |-->Input Device ""
[ 36.895] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 36.895] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 36.895] (II) LoadModule: "extmod"
[ 36.900] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 36.901] (II) Module extmod: vendor="X.Org Foundation"
[ 36.901] compiled for 1.9.2, module version = 1.0.0
[ 36.901] Module class: X.Org Server Extension
[ 36.901] ABI class: X.Org Server Extension, version 4.0
[ 36.902] (II) Loading extension MIT-SCREEN-SAVER
[ 36.902] (II) Loading extension XFree86-VidModeExtension
[ 36.902] (II) Loading extension XFree86-DGA
[ 36.902] (II) Loading extension DPMS
[ 36.902] (II) Loading extension XVideo
[ 36.902] (II) Loading extension XVideo-MotionCompensation
[ 36.902] (II) Loading extension X-Resource
[ 36.902] (II) LoadModule: "dbe"
[ 36.903] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 36.903] (II) Module dbe: vendor="X.Org Foundation"
[ 36.903] compiled for 1.9.2, module version = 1.0.0
[ 36.903] Module class: X.Org Server Extension
[ 36.903] ABI class: X.Org Server Extension, version 4.0
[ 36.904] (II) Loading extension DOUBLE-BUFFER
[ 36.904] (II) LoadModule: "glx"
[ 36.905] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 36.907] (II) Module glx: vendor="X.Org Foundation"
[ 36.908] compiled for 1.9.2, module version = 1.0.0
[ 36.908] ABI class: X.Org Server Extension, version 4.0
[ 36.908] (==) AIGLX enabled
[ 36.908] (II) Loading extension GLX
[ 36.908] (II) LoadModule: "record"
[ 36.910] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 36.910] (II) Module record: vendor="X.Org Foundation"
[ 36.910] compiled for 1.9.2, module version = 1.13.0
[ 36.910] Module class: X.Org Server Extension
[ 36.910] ABI class: X.Org Server Extension, version 4.0
[ 36.910] (II) Loading extension RECORD
[ 36.910] (II) LoadModule: "dri"
[ 36.912] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 36.913] (II) Module dri: vendor="X.Org Foundation"
[ 36.913] compiled for 1.9.2, module version = 1.0.0
[ 36.913] ABI class: X.Org Server Extension, version 4.0
[ 36.913] (II) Loading extension XFree86-DRI
[ 36.914] (II) LoadModule: "dri2"
[ 36.915] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 36.916] (II) Module dri2: vendor="X.Org Foundation"
[ 36.916] compiled for 1.9.2, module version = 1.2.0
[ 36.916] ABI class: X.Org Server Extension, version 4.0
[ 36.916] (II) Loading extension DRI2
[ 36.916] (II) LoadModule: "intel"
[ 36.917] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 36.922] (II) Module intel: vendor="X.Org Foundation"
[ 36.923] compiled for 1.9.2, module version = 2.9.1
[ 36.923] Module class: X.Org Video Driver
[ 36.923] ABI class: X.Org Video Driver, version 8.0
[ 36.923] (II) LoadModule: "mouse"
[ 36.924] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 36.925] (II) Module mouse: vendor="X.Org Foundation"
[ 36.925] compiled for 1.9.2, module version = 1.6.0
[ 36.925] Module class: X.Org XInput Driver
[ 36.925] ABI class: X.Org XInput driver, version 11.0
[ 36.925] (II) LoadModule: "kbd"
[ 36.926] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 36.927] (II) Module kbd: vendor="X.Org Foundation"
[ 36.927] compiled for 1.9.2, module version = 1.5.0
[ 36.927] Module class: X.Org XInput Driver
[ 36.927] ABI class: X.Org XInput driver, version 11.0
[ 36.927] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 36.928] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 36.928] (--) using VT number 5
[ 36.965] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 36.967] (II) Loading sub module "vgahw"
[ 36.967] (II) LoadModule: "vgahw"
[ 36.970] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 36.971] (II) Module vgahw: vendor="X.Org Foundation"
[ 36.971] compiled for 1.9.2, module version = 0.1.0
[ 36.971] ABI class: X.Org Video Driver, version 8.0
[ 36.971] (II) Loading sub module "ramdac"
[ 36.971] (II) LoadModule: "ramdac"
[ 36.971] (II) Module "ramdac" already built-in
[ 36.971] drmOpenDevice: node name is /dev/dri/card0
[ 36.971] drmOpenDevice: open result is 14, (OK)
[ 36.972] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 36.972] drmOpenDevice: node name is /dev/dri/card0
[ 36.972] drmOpenDevice: open result is 14, (OK)
[ 36.972] drmOpenByBusid: drmOpenMinor returns 14
[ 36.972] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 36.972] (II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
[ 36.972] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 36.972] (==) intel(0): RGB weight 888
[ 36.972] (==) intel(0): Default visual is TrueColor
[ 36.972] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 36.972] (--) intel(0): Chipset: "Arrandale"
[ 36.972] (--) intel(0): Linear framebuffer at 0xE0000000
[ 36.972] (--) intel(0): IO registers at addr 0xF0000000 size 4194304
[ 36.972] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 36.973] (II) intel(0): No SDVO device is found in VBT
[ 36.975] (II) intel(0): 2 display pipes available.
[ 36.975] (II) Loading sub module "ddc"
[ 36.975] (II) LoadModule: "ddc"
[ 36.975] (II) Module "ddc" already built-in
[ 36.975] (II) Loading sub module "i2c"
[ 36.975] (II) LoadModule: "i2c"
[ 36.975] (II) Module "i2c" already built-in
[ 36.976] (II) intel(0): Output VGA has no monitor section
[ 36.977] (II) intel(0): Output eDP has no monitor section
[ 36.977]
##############################################
*** In function i830_dp_i2c_init, on line 1861, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 36.977] i830_dp_i2c_init DPDDC-A
[ 36.977] ##############################################
[ 36.978] (II) intel(0): I2C bus "DPDDC-A" initialized.
[ 36.993]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 554, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 36.993] aux_i2c nack
[ 36.993] ##############################################
[ 37.013]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 554, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.013] aux_i2c nack
[ 37.013] ##############################################
[ 37.033] (II) intel(0): eDP output detected
[ 37.033] (II) intel(0): Output HDMI-3 has no monitor section
[ 37.033] (II) intel(0): I2C bus "HDMIB" initialized.
[ 37.033] (II) intel(0): HDMI-3 output detected
[ 37.033] (II) intel(0): Output DP-B has no monitor section
[ 37.033]
##############################################
*** In function i830_dp_i2c_init, on line 1861, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.034] i830_dp_i2c_init DPDDC-B
[ 37.034] ##############################################
[ 37.034] (II) intel(0): I2C bus "DPDDC-B" initialized.
[ 37.053]
##############################################
*** In function i830_dp_aux_ch, on line 381, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.053] dp_aux_ch timeout status 0x5145003e
[ 37.053] ##############################################
[ 37.053]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 525, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.054] aux_ch failed -60
[ 37.054] ##############################################
[ 37.073]
##############################################
*** In function i830_dp_aux_ch, on line 381, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.073] dp_aux_ch timeout status 0x5145003e
[ 37.073] ##############################################
[ 37.074]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 525, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.074] aux_ch failed -60
[ 37.074] ##############################################
[ 37.074] (II) intel(0): DP-B output detected
[ 37.074] (II) intel(0): Output HDMI-4 has no monitor section
[ 37.074] (II) intel(0): I2C bus "HDMIC" initialized.
[ 37.074] (II) intel(0): HDMI-4 output detected
[ 37.074] (II) intel(0): Output DP-C has no monitor section
[ 37.074]
##############################################
*** In function i830_dp_i2c_init, on line 1861, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.074] i830_dp_i2c_init DPDDC-C
[ 37.074] ##############################################
[ 37.074] (II) intel(0): I2C bus "DPDDC-C" initialized.
[ 37.093]
##############################################
*** In function i830_dp_aux_ch, on line 381, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.093] dp_aux_ch timeout status 0x5145003e
[ 37.093] ##############################################
[ 37.094]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 525, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.094] aux_ch failed -60
[ 37.094] ##############################################
[ 37.113]
##############################################
*** In function i830_dp_aux_ch, on line 381, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.113] dp_aux_ch timeout status 0x5145003e
[ 37.113] ##############################################
[ 37.114]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 525, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.114] aux_ch failed -60
[ 37.114] ##############################################
[ 37.114] (II) intel(0): DP-C output detected
[ 37.138] (II) intel(0): EDID for output VGA
[ 37.138] (II) intel(0): I2C device "DPDDC-A:ddc2" registered at address 0xA0.
[ 37.153]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 554, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.153] aux_i2c nack
[ 37.154] ##############################################
[ 37.173]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 554, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.173] aux_i2c nack
[ 37.174] ##############################################
[ 37.193]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 554, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 37.193] aux_i2c nack
[ 37.194] ##############################################
[ 39.835] (II) intel(0): EDID for output eDP
[ 39.835] (II) intel(0): Manufacturer: LGD Model: 24d Serial#: 0
[ 39.835] (II) intel(0): Year: 2010 Week: 0
[ 39.835] (II) intel(0): EDID Version: 1.4
[ 39.835] (II) intel(0): Digital Display Input
[ 39.835] (II) intel(0): 6 bits per channel
[ 39.835] (II) intel(0): Digital interface is DisplayPort
[ 39.835] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 17
[ 39.835] (II) intel(0): Gamma: 2.20
[ 39.835] (II) intel(0): No DPMS capabilities specified
[ 39.835] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 39.835] (II) intel(0): First detailed timing is preferred mode
[ 39.835] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 39.835] (II) intel(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
[ 39.835] (II) intel(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
[ 39.835] (II) intel(0): Manufacturer's mask: 0
[ 39.835] (II) intel(0): Supported detailed timing:
[ 39.836] (II) intel(0): clock: 75.5 MHz Image Size: 294 x 166 mm
[ 39.836] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1581 h_border: 0
[ 39.836] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 39.836] (II) intel(0): Supported detailed timing:
[ 39.836] (II) intel(0): clock: 50.3 MHz Image Size: 294 x 166 mm
[ 39.836] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1576 h_border: 0
[ 39.836] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 39.836] (II) intel(0): DR347133WH1
[ 39.836] (II) intel(0): Unknown vendor-specific block 0
[ 39.836] (II) intel(0): EDID (in hex):
[ 39.836] (II) intel(0): 00ffffffffffff0030e44d0200000000
[ 39.836] (II) intel(0): 00140104951d117802d5d59659568c27
[ 39.836] (II) intel(0): 1f505400000001010101010101010101
[ 39.836] (II) intel(0): 0101010101017e1d56d7500019303020
[ 39.836] (II) intel(0): 360026a61000001aa61356d250001930
[ 39.836] (II) intel(0): 3020360026a61000001a000000fe0044
[ 39.836] (II) intel(0): 52333437803133335748310a00000000
[ 39.836] (II) intel(0): 00004131160000000009010a20200006
[ 39.836] (II) intel(0): EDID vendor "LGD", prod id 589
[ 39.836] (II) intel(0): Printing probed modes for output eDP
[ 39.836] (II) intel(0): Modeline "1366x768"x60.2 75.50 1366 1414 1446 1581 768 771 777 793 +hsync -vsync (47.8 kHz)
[ 39.836] (II) intel(0): Modeline "1366x768"x40.2 50.30 1366 1414 1446 1576 768 771 777 793 +hsync -vsync (31.9 kHz)
[ 39.836] (II) intel(0): I2C device "HDMIB:ddc2" registered at address 0xA0.
[ 39.842] (II) intel(0): EDID for output HDMI-3
[ 39.842] (II) intel(0): EDID for output HDMI-3
[ 39.855]
##############################################
*** In function i830_dp_aux_ch, on line 381, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 39.855] dp_aux_ch timeout status 0x5145003e
[ 39.855] ##############################################
[ 39.855]
##############################################
*** In function ironlake_dp_detect, on line 1505, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 39.856] DPCD: 0000
[ 39.856] ##############################################
[ 39.856] (II) intel(0): EDID for output DP-B
[ 39.856] (II) intel(0): I2C device "HDMIC:ddc2" registered at address 0xA0.
[ 39.861] (II) intel(0): EDID for output HDMI-4
[ 39.861] (II) intel(0): EDID for output HDMI-4
[ 39.875]
##############################################
*** In function i830_dp_aux_ch, on line 381, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 39.875] dp_aux_ch timeout status 0x5145003e
[ 39.875] ##############################################
[ 39.875]
##############################################
*** In function ironlake_dp_detect, on line 1505, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 39.876] DPCD: 0000
[ 39.876] ##############################################
[ 39.876] (II) intel(0): EDID for output DP-C
[ 39.876] (II) intel(0): Output VGA disconnected
[ 39.876] (II) intel(0): Output eDP connected
[ 39.876] (II) intel(0): Output HDMI-3 disconnected
[ 39.876] (II) intel(0): Output DP-B disconnected
[ 39.876] (II) intel(0): Output HDMI-4 disconnected
[ 39.876] (II) intel(0): Output DP-C disconnected
[ 39.876] (II) intel(0): Using exact sizes for initial modes
[ 39.876] (II) intel(0): Output eDP using initial mode 1366x768
[ 39.876] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 39.876] (II) intel(0): detected 512 kB GTT.
[ 39.876] (II) intel(0): detected 32764 kB stolen memory.
[ 39.876] (==) intel(0): video overlay key set to 0x101fe
[ 39.876] (==) intel(0): DPI set to (96, 96)
[ 39.876] (II) Loading sub module "fb"
[ 39.876] (II) LoadModule: "fb"
[ 39.877] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 39.879] (II) Module fb: vendor="X.Org Foundation"
[ 39.879] compiled for 1.9.2, module version = 1.0.0
[ 39.879] ABI class: X.Org ANSI C Emulation, version 0.4
[ 39.879] (II) Loading sub module "int10"
[ 39.879] (II) LoadModule: "int10"
[ 39.881] (II) Loading /usr/X11R7/lib/modules/libint10.so
[ 39.883] (II) Module int10: vendor="X.Org Foundation"
[ 39.883] compiled for 1.9.2, module version = 1.0.0
[ 39.883] ABI class: X.Org Video Driver, version 8.0
[ 39.883] (WW) intel(0): remove MTRR a0000 - c0000
[ 39.885] (WW) intel(0): remove MTRR c0000 - 100000
[ 39.886] (II) intel(0): Primary V_BIOS segment is: 0xc000
[ 39.886] (WW) intel(0): remove MTRR 0 - 1000
[ 39.890] (--) intel(0): Console VGA mode is 0x105
[ 39.890] (==) Depth 24 pixmap format is 32 bpp
[ 39.891] (II) intel(0): Kernel reported 1006592 total, 0 used
[ 39.891] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available
[ 39.891] (II) intel(0): [DRI2] Setup complete
[ 39.891] (II) intel(0): [DRI2] DRI driver: i965
[ 39.891] (**) intel(0): Framebuffer compression disabled
[ 39.891] (**) intel(0): Tiling enabled
[ 39.891] (**) intel(0): SwapBuffers wait enabled
[ 39.970] (==) intel(0): VideoRam: 262144 KB
[ 39.970] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 39.971] (II) intel(0): Tiled allocation successful.
[ 39.971] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 39.971]
##############################################
*** In function I830ScreenInit, on line 2690, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 39.971] assert( if(!vgaHWMapMem(scrn)) )
[ 39.971] ##############################################
[ 39.972] (WW) intel(0): remove MTRR a0000 - b0000
[ 39.973]
##############################################
*** In function I830ScreenInit, on line 2695, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 39.973] assert( if(!I830EnterVT(scrnIndex, 0)) )
[ 39.973] ##############################################
[ 39.973]
##############################################
*** In function I830ScreenInit, on line 2706, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 39.973] assert( if(!fbScreenInit(screen, ...) )
[ 39.973] ##############################################
[ 39.977] (II) UXA(0): Driver registered support for the following operations:
[ 39.977] (II) solid
[ 39.977] (II) copy
[ 39.977] (II) composite (RENDER acceleration)
[ 39.977] (II) put_image
[ 39.977] (II) get_image
[ 39.978] (==) intel(0): Backing store disabled
[ 39.978] (==) intel(0): Silken mouse enabled
[ 39.979] (II) intel(0): Initializing HW Cursor
[ 39.979]
##############################################
*** In function I830EnterVT, on line 2935, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 39.979] Enter VT
[ 39.979] ##############################################
[ 39.979]
##############################################
*** In function ironlake_edp_backlight_off, on line 912, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 39.980]
[ 39.980] ##############################################
[ 39.980]
##############################################
*** In function i830_dp_link_down, on line 1412, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 39.980]
[ 39.980] ##############################################
[ 41.196] Plane disable
[ 41.196] Pipe disable
[ 41.216] PFIT disable
[ 41.216] FDI TX disable
[ 41.216] FDI RX disable
[ 41.236] FDI TX train 1 preload
[ 41.236] FDI RX train 1 preload
[ 41.256] LVDS port force off
[ 41.256] Transcoder disable
[ 41.276] PCH DPLL disable
[ 41.276] FDI RX PLL PCD disable
[ 41.276] FDI TX PLL disable 00024040
[ 41.296] FDI RX PLL disable 00044000
[ 41.316] DPMS off done
[ 41.336] Plane disable
[ 41.336] Pipe disable
[ 41.356] PFIT disable
[ 41.356] FDI TX disable
[ 41.356] FDI RX disable
[ 41.376] FDI TX train 1 preload
[ 41.376] FDI RX train 1 preload
[ 41.396] LVDS port force off
[ 41.396] Transcoder disable
[ 41.416] PCH DPLL disable
[ 41.416] FDI RX PLL PCD disable
[ 41.416] FDI TX PLL disable 00004040
[ 41.436] FDI RX PLL disable 00044000
[ 41.456] DPMS off done
[ 41.520] (II) intel(0): Fixed memory allocation layout:
[ 41.520] (II) intel(0): 0x01fff000: end of stolen memory
[ 41.520] (II) intel(0): 0x01fff000-0x0fffffff: DRI memory manager (229380 kB)
[ 41.520] (II) intel(0): 0x10000000: end of aperture
[ 41.520] (II) intel(0): BO memory allocation layout:
[ 41.520] (II) intel(0): 0x01fff000: start of memory manager
[ 41.520] (II) intel(0): 0x02020000-0x0243ffff: front buffer (4224 kB) X tiled
[ 41.520] (II) intel(0): 0x02520000-0x02529fff: HW cursors (40 kB)
[ 41.520] (II) intel(0): 0x10000000: end of memory manager
[ 41.663]
##############################################
*** In function I830InitHWCursor, on line 82, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_cursor.c ***
[ 41.663] I830InitHWCursor
[ 41.663] ##############################################
[ 41.753]
##############################################
*** In function ironlake_edp_backlight_off, on line 912, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 41.753]
[ 41.753] ##############################################
[ 42.077] Plane disable
[ 42.077] Pipe disable
[ 42.097] PFIT disable
[ 42.097] FDI TX disable
[ 42.097] FDI RX disable
[ 42.117] FDI TX train 1 preload
[ 42.117] FDI RX train 1 preload
[ 42.137] LVDS port force off
[ 42.137] Transcoder disable
[ 42.157] PCH DPLL disable
[ 42.157] FDI RX PLL PCD disable
[ 42.157] FDI TX PLL disable 00024040
[ 42.177] FDI RX PLL disable 00044000
[ 42.197] DPMS off done
[ 42.217] Plane disable
[ 42.217] Pipe disable
[ 42.237] PFIT disable
[ 42.237] FDI TX disable
[ 42.237] FDI RX disable
[ 42.257] FDI TX train 1 preload
[ 42.257] FDI RX train 1 preload
[ 42.277] LVDS port force off
[ 42.277] Transcoder disable
[ 42.297] PCH DPLL disable
[ 42.297] FDI RX PLL PCD disable
[ 42.297] FDI TX PLL disable 00004040
[ 42.317] FDI RX PLL disable 00044000
[ 42.337] DPMS off done
[ 42.358]
##############################################
*** In function i830_dp_mode_fixup, on line 627, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 42.358] Display port link bw 0a lane count 1 clock 270000
[ 42.358] ##############################################
[ 42.359]
##############################################
*** In function ironlake_edp_backlight_off, on line 912, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 42.359]
[ 42.359] ##############################################
[ 42.667]
##############################################
*** In function ironlake_edp_pll_on, on line 924, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 42.667]
[ 42.667] ##############################################
[ 42.687] Plane disable
[ 42.687] Pipe disable
[ 42.707] PFIT disable
[ 42.707] FDI TX disable
[ 42.707] FDI RX disable
[ 42.727] FDI TX train 1 preload
[ 42.727] FDI RX train 1 preload
[ 42.747] LVDS port force off
[ 42.747] Transcoder disable
[ 42.767] PCH DPLL disable
[ 42.767] FDI RX PLL PCD disable
[ 42.767] FDI TX PLL disable 00024040
[ 42.787] FDI RX PLL disable 00044000
[ 42.807] DPMS off done
[ 42.827] (WW) intel(0): Chosen PLL clock of 216.0 Mhz more than 2% away from desired 270.0 Mhz
[ 42.827] bpp 6
[ 42.887]
##############################################
*** In function ironlake_set_pll_edp, on line 1665, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_display.c ***
[ 42.887] eDP PLL enable for clock 270000
[ 42.887] ##############################################
[ 42.987] Pipe enable
[ 42.987] Plane enable
[ 42.987] LUT load
[ 42.988] DPMS on done
[ 43.227]
##############################################
*** In function ironlake_edp_backlight_on, on line 894, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 43.228]
[ 43.228] ##############################################
[ 43.538] Plane disable
[ 43.538] Pipe disable
[ 43.558] PFIT disable
[ 43.558] FDI TX disable
[ 43.558] FDI RX disable
[ 43.578] FDI TX train 1 preload
[ 43.578] FDI RX train 1 preload
[ 43.598] LVDS port force off
[ 43.598] Transcoder disable
[ 43.618] PCH DPLL disable
[ 43.618] FDI RX PLL PCD disable
[ 43.618] FDI TX PLL disable 00004040
[ 43.638] FDI RX PLL disable 00044000
[ 43.658] DPMS off done
[ 43.678] (II) intel(0): Output configuration:
[ 43.678] (II) intel(0): Pipe A is on
[ 43.678] (II) intel(0): Display plane A is now enabled and connected to pipe A.
[ 43.678] (II) intel(0): Pipe B is off
[ 43.678] (II) intel(0): Display plane B is now disabled and connected to pipe B.
[ 43.678] (II) intel(0): Output VGA is connected to pipe none
[ 43.678] (II) intel(0): Output eDP is connected to pipe A
[ 43.678] (II) intel(0): Output HDMI-3 is connected to pipe none
[ 43.678] (II) intel(0): Output DP-B is connected to pipe none
[ 43.678] (II) intel(0): Output HDMI-4 is connected to pipe none
[ 43.678] (II) intel(0): Output DP-C is connected to pipe none
[ 43.678] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 43.679]
##############################################
*** In function I830ScreenInit, on line 2775, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 43.679] assert( if(!miCreateDefColormap(screen)) )
[ 43.679] ##############################################
[ 43.680]
##############################################
*** In function I830ScreenInit, on line 2779, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 43.680] assert( if(!xf86HandleColormaps(screen, ...)) )
[ 43.680] ##############################################
[ 43.680] (==) intel(0): DPMS enabled
[ 43.680] (==) intel(0): Intel XvMC decoder enabled
[ 43.680] (II) intel(0): Set up textured video
[ 43.681] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 43.681] (II) intel(0): direct rendering: DRI2 Enabled
[ 43.682] (--) RandR disabled
[ 43.682] (II) Initializing built-in extension Generic Event Extension
[ 43.682] (II) Initializing built-in extension SHAPE
[ 43.682] (II) Initializing built-in extension MIT-SHM
[ 43.682] (II) Initializing built-in extension XInputExtension
[ 43.682] (II) Initializing built-in extension XTEST
[ 43.682] (II) Initializing built-in extension BIG-REQUESTS
[ 43.682] (II) Initializing built-in extension SYNC
[ 43.682] (II) Initializing built-in extension XKEYBOARD
[ 43.682] (II) Initializing built-in extension XC-MISC
[ 43.682] (II) Initializing built-in extension SECURITY
[ 43.682] (II) Initializing built-in extension XINERAMA
[ 43.682] (II) Initializing built-in extension XFIXES
[ 43.682] (II) Initializing built-in extension XFree86-Bigfont
[ 43.682] (II) Initializing built-in extension RENDER
[ 43.682] (II) Initializing built-in extension RANDR
[ 43.682] (II) Initializing built-in extension COMPOSITE
[ 43.682] (II) Initializing built-in extension DAMAGE
[ 43.698] (II) AIGLX: Screen 0 is not DRI capable
[ 43.726] (II) AIGLX: Loaded and initialized /usr/X11R7/lib/modules/dri/swrast_dri.so
[ 43.726] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 43.726] (II) intel(0): Setting screen physical size to 361 x 203
[ 44.100] (WW) : No Device specified, looking for one...
[ 44.144] (II) : found Device "/dev/wsmouse"
[ 44.150] (**) : Protocol: WSMouse
[ 44.150] (**) Option "CorePointer"
[ 44.150] (**) : always reports core events
[ 44.150] (**) Option "Device" "/dev/wsmouse"
[ 44.161] (==) : Emulate3Buttons, Emulate3Timeout: 50
[ 44.161] (**) : ZAxisMapping: buttons 4 and 5
[ 44.162] (**) : Buttons: 9
[ 44.162] (II) XINPUT: Adding extended input device "" (type: MOUSE)
[ 44.162] (**) : (accel) keeping acceleration scheme 1
[ 44.162] (**) : (accel) acceleration profile 0
[ 44.162] (**) : (accel) acceleration factor: 2.000
[ 44.162] (**) : (accel) acceleration threshold: 4
[ 44.168] (**) Option "CoreKeyboard"
[ 44.168] (**) : always reports core events
[ 44.168] (**) Option "Protocol" "standard"
[ 44.168] (**) : Protocol: standard
[ 44.168] (**) Option "XkbRules" "base"
[ 44.168] (**) : XkbRules: "base"
[ 44.168] (**) Option "XkbModel" "pc105"
[ 44.168] (**) : XkbModel: "pc105"
[ 44.168] (**) Option "XkbLayout" "us"
[ 44.168] (**) : XkbLayout: "us"
[ 44.168] (**) Option "CustomKeycodes" "off"
[ 44.168] (**) : CustomKeycodes disabled
[ 44.168] (II) XINPUT: Adding extended input device "" (type: KEYBOARD)
[ 44.169] Pipe enable
[ 44.169] Plane enable
[ 44.169] LUT load
[ 44.169] DPMS on done
[ 44.169]
##############################################
*** In function ironlake_edp_backlight_on, on line 894, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 44.170]
[ 44.170] ##############################################
[ 66.904]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 554, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 66.904] aux_i2c nack
[ 66.904] ##############################################
[ 66.924]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 554, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 66.924] aux_i2c nack
[ 66.924] ##############################################
[ 66.944]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 554, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 66.944] aux_i2c nack
[ 66.944] ##############################################
[ 69.585] (II) intel(0): EDID vendor "LGD", prod id 589
[ 69.585] (II) intel(0): Printing DDC gathered Modelines:
[ 69.585] (II) intel(0): Modeline "1366x768"x0.0 75.50 1366 1414 1446 1581 768 771 777 793 +hsync -vsync (47.8 kHz)
[ 69.586] (II) intel(0): Modeline "1366x768"x0.0 50.30 1366 1414 1446 1576 768 771 777 793 +hsync -vsync (31.9 kHz)
[ 69.586] (II) intel(0): EDID vendor "LGD", prod id 589
[ 69.605]
##############################################
*** In function i830_dp_aux_ch, on line 381, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 69.605] dp_aux_ch timeout status 0x5145003e
[ 69.606] ##############################################
[ 69.606]
##############################################
*** In function ironlake_dp_detect, on line 1505, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 69.606] DPCD: 0000
[ 69.606] ##############################################
[ 69.625]
##############################################
*** In function i830_dp_aux_ch, on line 381, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 69.626] dp_aux_ch timeout status 0x5145003e
[ 69.626] ##############################################
[ 69.626]
##############################################
*** In function ironlake_dp_detect, on line 1505, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 69.626] DPCD: 0000
[ 69.626] ##############################################
[ 113.769] (II) UnloadModule: "mouse"
[ 113.770] (II) UnloadModule: "kbd"
[ 113.770] Pipe enable
[ 113.770] Plane enable
[ 113.770] LUT load
[ 113.770] DPMS on done
[ 113.771]
##############################################
*** In function ironlake_edp_backlight_on, on line 894, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 113.771]
[ 113.771] ##############################################
[ 113.775]
##############################################
*** In function I830LeaveVT, on line 2873, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 113.776] Leave VT
[ 113.776] ##############################################
[ 114.019]
##############################################
*** In function I830CloseScreen, on line 3062, in file /tmp/drmgem/usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 114.020]
Unmapping memory
[ 114.020] ##############################################
dmesg (Arrandale)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.52 (GENERIC) #0: Sat Jun 11 11:23:19 CEST 2011
instsoft@yosemite:/tmp/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8117 MB
avail memory = 7855 MB
Prep module path=ffs len=282551 pa=dcd000
timecounter: Timecounters tick every 10.000 msec
No bootinfo commands at boot
RTC BIOS diagnostic error 0x30
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.6 @ 0xf2460 (66 entries)
Dell Inc. Latitude E4310 (0001)
mainbus0 (root)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40, using 32 (20110211/tbfadt-517)
cpu0 at mainbus0 apid 0cpu0: 8 page colors
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
timecounter: Timecounter "lapic" frequency 133090221 Hz quality -100
: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu0: PAT enabled
cpu1 at mainbus0 apid 4x86_ipi_init: ESR 00000040
: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu1: PAT enabled
cpu2 at mainbus0 apid 1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu2: PAT enabled
cpu3 at mainbus0 apid 5: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu3: PAT enabled
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110211
acpi0: X/RSDT: OemId , AslId
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpi0: ACPI-Safe 24-bit timer
acpiec0 at acpi0 (ECDV, PNP0C09-0): io 0x930,0x934
FWHD (INT0800) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-0): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, DLL0410) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
A_CC (SMO8800) at acpi0 not configured
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpivga0: capabilities: _DOS _DOD
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout0: capabilities: _DCS _DGS _DSS
acpiout1 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1: capabilities: _BCL _BCM _BQC _DCS _DGS _DSS
acpiout1: brightness levels: 0 6 13 20 26 33 40 46 53 60 66 73 80 86 93 100
acpiout2 at acpivga0 (DVI, 0x0302): ACPI Display Output Device
acpiout2: capabilities: _DCS _DGS _DSS
acpiout3 at acpivga0 (DVI2, 0x0303): ACPI Display Output Device
acpiout3: capabilities: _DCS _DGS _DSS
acpiout4 at acpivga0 (DP, 0x0300): ACPI Display Output Device
acpiout4: capabilities: _DCS _DGS _DSS
acpiout5 at acpivga0 (DP2, 0x0301): ACPI Display Output Device
acpiout5: capabilities: _DCS _DGS _DSS
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
acpivga0: 0x0302 (acpiout2): Unknown Output Device, head 0
acpivga0: 0x0303 (acpiout3): Unknown Output Device, head 0
acpivga0: 0x0300 (acpiout4): Unknown Output Device, head 0
acpivga0: 0x0301 (acpiout5): Unknown Output Device, head 0
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: SMP LION rechargeable battery
acpibat0: model number DELL Y266P09, serial number 132
acpibat0: granularity: low->warn 0.028 Ah, warn->full 0.028 Ah
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
acpiwmi0: {8D9DDCBC-A997-11DA-B012-B622A1EF5492} oid 4141 count 01 flags 00
acpiwmi0: {A80593CE-A997-11DA-B012-B622A1EF5492} oid 4142 count 01 flags 02
acpiwmi0: {9DBB5994-A997-11DA-B012-B622A1EF5492} oid 00D0 count 01 flags 08
acpiwmi0: {A3776CE0-1E88-11DB-A98B-0800200C9A66} oid 4342 count 01 flags 00
acpiwmi0: {05901221-D566-11D1-B2F0-00A0C9062910} oid 4F4D count 01 flags 00
wmidell0 at acpiwmi0: Dell WMI mappings
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: synaptics_probe: Not synaptics.
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0044 (rev. 0x02)
agp0 at pchb0: detected 32764k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
genfb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0046
genfb0: recycling existing fb mapping at ffff800052c60000
genfb0: framebuffer at 0xe0000000, size 1024x768,depth 8, stride 1024
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
inteldrm0 at genfb0: ioapic0 pin 16
drmdev0 at inteldrm0
wm0 at pci0 dev 25 function 0: PCH LAN (82577LM) Controller, rev. 5
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 5c:26:0a:13:8f:e1
ihphy0 at wm0 phy 2: i82577 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
usb0: WARNING: power management not supported
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0 vendor 0x111D product 0x7605 nid 0x01: Sigmatel 92HD81B1X5
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
nid=0D [pin: Speaker (Built-In)]
nid=13 [audio output] [source: dac]
nid=0B [pin: HP Out (Black Jack)]
nid=13 [audio output] [source: dac]
hdafg0: ADC01 2ch: Mic In [Jack]
nid=0A [pin: Mic In (Black Jack)]
nid=0F [pin: Mic In (Black Jack)]
hdafg0: ADC02 2ch: Mic In [Built-In]
nid=11 [pin: Mic In (Built-In)]
hdafg0: DAC03 2ch: Speaker [Jack]
nid=0E [pin: Speaker (Black Jack)]
nid=14 [audio output] [source: dac]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0 vendor 0x8086 product 0x2804 nid 0x01: Intel G45 HDMI
hdafg1: DP00 8ch: Digital Out [Jack]
nid=04 [pin: Digital Out (Jack)]
nid=02 [audio output] [source: dac]
hdafg1: DP01 8ch: Digital Out [Jack]
nid=05 [pin: Digital Out (Jack)]
nid=03 [audio output] [source: dac]
hdafg1: 8ch/0ch 48000Hz 16/16*
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x3b42 (rev. 0x05)
ppb0: PCI Express 2.0
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x3b44 (rev. 0x05)
ppb1: PCI Express 2.0
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 0x8086 product 0x422b (rev. 0x35)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 3T3R, MoW, address 00:24:d7:55:88:5c
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x3b46 (rev. 0x05)
ppb2: PCI Express 2.0
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc0 at pci3 dev 0 function 0: vendor 0x1180 product 0xe822 (rev. 0x01)
sdhc0: interrupting at ioapic0 pin 18
sdmmc0 at sdhc0
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x3b48 (rev. 0x05)
ppb3: PCI Express 2.0
ppb3: disabling notification events
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 17
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
usb1: WARNING: power management not supported
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xa5)
pci5 at ppb4 bus 10
pci5: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3b0f (rev. 0x05)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x3b2f
ahcisata0: interrupting at ioapic0 pin 18
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 0x10300, 6 ports, 32 command slots, features 0xe720e060
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x3b30 (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 3 us, pow 1000 mW
acpicpu0: C2: FFH, lat 205 us, pow 500 mW, bus master check
acpicpu0: C3: FFH, lat 245 us, pow 350 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 25000 mW, 2533 MHz
acpicpu0: P1: FFH, lat 10 us, pow 23390 mW, 2399 MHz
acpicpu0: P2: FFH, lat 10 us, pow 21835 mW, 2266 MHz
acpicpu0: P3: FFH, lat 10 us, pow 20334 mW, 2133 MHz
acpicpu0: P4: FFH, lat 10 us, pow 18817 mW, 1999 MHz
acpicpu0: P5: FFH, lat 10 us, pow 17351 mW, 1866 MHz
acpicpu0: P6: FFH, lat 10 us, pow 15937 mW, 1733 MHz
acpicpu0: P7: FFH, lat 10 us, pow 14528 mW, 1599 MHz
acpicpu0: P8: FFH, lat 10 us, pow 13163 mW, 1466 MHz
acpicpu0: P9: FFH, lat 10 us, pow 11835 mW, 1333 MHz
acpicpu0: P10: FFH, lat 10 us, pow 10512 mW, 1199 MHz
acpicpu0: T0: HLT, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: HLT, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: HLT, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: HLT, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: HLT, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: HLT, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: HLT, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: HLT, lat 1 us, pow 0 mW, 16 %
acpicpu0: id 1, lapic id 0, cap 0x0bfd, flags 0x0018e297
acpicpu0: P-state coordination: 4 CPUs, domain 0, type HW_ALL
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu1: id 2, lapic id 4, cap 0x0bfd, flags 0x0018e297
acpicpu1: P-state coordination: 4 CPUs, domain 0, type HW_ALL
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
acpicpu2: id 3, lapic id 1, cap 0x0bfd, flags 0x0018e297
acpicpu2: P-state coordination: 4 CPUs, domain 0, type HW_ALL
acpicpu3 at cpu3: ACPI CPU
acpicpu3: id 4, lapic id 5, cap 0x0bfd, flags 0x0018e297
acpicpu3: P-state coordination: 4 CPUs, domain 0, type HW_ALL
Initializing SSP: ed6027eb2a4c88a0 2f75831afb9b6d1b dafda8f2986ea99a c1c63efd239195f1 c48e64e6d732a01b 7c9be6ad333ce709 bec006f109d788c3 2a215c0f7f10c628
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu1: TSC skew=6 drift=-4
cpu2: TSC skew=-162 drift=154
cpu3: TSC skew=4 drift=-8
TSC not known safe on this CPU
timecounter: Timecounter "TSC" frequency 2527272600 Hz quality -100
acpiacad0: AC adapter offline.
acpiacad0: AC adapter not connected
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
cpu1: running
cpu2: running
cpu3: running
acpicpu3: ACPI CPUs started
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0:
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0 at uhub3 port 8
uvideo0 at uhub2 port 4 configuration 1 interface 0: CN0F5CWW7866409802FKA01 Laptop_Integrated_Webcam_2M, rev 2.00/a7.20, addr 3
video0 at uvideo0: CN0F5CWW7866409802FKA01 Laptop_Integrated_Webcam_2M, rev 2.00/a7.20, addr 3
ugen0: Broadcom Corp 5880, rev 1.10/1.01, addr 3
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
raidattach: Asked for 8 units
Kernelized RAIDframe activated
pad: requested 1 units
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
Searching for RAID components...
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
iwn0: radio is disabled by hardware switch
iwn0: cannot assign link-local address
iwn0: radio is disabled by hardware switch
iwn0: radio is disabled by hardware switch
iwn0: cannot assign link-local address
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
/var/log/Xorg.0.log (915GM)
[ 45.344]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 45.344] X Protocol Version 11, Revision 0
[ 45.344] Build Operating System: NetBSD/i386 -
[ 45.344] Current Operating System: NetBSD niagara 5.99.52 NetBSD 5.99.52 (GENERIC) #1: Sat Jun 11 01:41:07 CEST 2011 sutre@niagara:/home/sutre/tmp/usr/src/sys/arch/i386/compile/GENERIC i386
[ 45.346] Build Date: 23 November 2010 01:33:05AM
[ 45.346]
[ 45.346] Current version of pixman: 0.21.4
[ 45.346] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 45.346] Markers: (--) probed, (*_) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45.346](==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 11 10:58:57 2011
[ 45.495](II) Loader magic: 0x82277dc
[ 45.495](II) Module ABI versions:
[ 45.495] X.Org ANSI C Emulation: 0.4
[ 45.495] X.Org Video Driver: 8.0
[ 45.495] X.Org XInput driver : 11.0
[ 45.495] X.Org Server Extension : 4.0
[ 45.508](--) PCI:_(0:0:2:0) 8086:2592:10cf:12e2 rev 4, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001400/8
[ 45.508](--) PCI: (0:0:2:1) 8086:2792:10cf:12e2 rev 4, Mem @ 0x00000000/524288
[ 45.515](==) Using default built-in configuration (12 lines)
[ 45.515](==) --- Start of built-in configuration ---
[ 45.515] Section "Device"
[ 45.515] Identifier "Builtin Default intel Device 0"
[ 45.515] Driver "intel"
[ 45.515] EndSection
[ 45.515] Section "Screen"
[ 45.515] Identifier "Builtin Default intel Screen 0"
[ 45.515] Device "Builtin Default intel Device 0"
[ 45.515] EndSection
[ 45.516] Section "ServerLayout"
[ 45.516] Identifier "Builtin Default Layout"
[ 45.516] Screen "Builtin Default intel Screen 0"
[ 45.516] EndSection
[ 45.516](==) --- End of built-in configuration ---
[ 45.527](==) ServerLayout "Builtin Default Layout"
[ 45.527](**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 45.527](**) | |-->Monitor ""
[ 45.542](**) | |-->Device "Builtin Default intel Device 0"
[ 45.542](==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
[ 45.542](==) Not automatically adding devices
[ 45.542](==) Not automatically enabling devices
[ 45.825](==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 45.825](==) ModulePath set to "/usr/X11R7/lib/modules"
[ 45.826](==) |-->Input Device ""
[ 45.826](==) |-->Input Device ""
[ 45.826](==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 45.826](==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 45.826](II) LoadModule: "extmod"
[ 45.937](II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 45.960](II) Module extmod: vendor="X.Org Foundation"
[ 45.974] compiled for 1.9.2, module version = 1.0.0
[ 45.974] Module class: X.Org Server Extension
[ 45.974] ABI class: X.Org Server Extension, version 4.0
[ 45.974](II) Loading extension MIT-SCREEN-SAVER
[ 45.974](II) Loading extension XFree86-VidModeExtension
[ 45.975](II) Loading extension XFree86-DGA
[ 45.976](II) Loading extension DPMS
[ 45.976](II) Loading extension XVideo
[ 45.976](II) Loading extension XVideo-MotionCompensation
[ 45.976](II) Loading extension X-Resource
[ 45.976](II) LoadModule: "dbe"
[ 45.979](II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 45.987](II) Module dbe: vendor="X.Org Foundation"
[ 45.987] compiled for 1.9.2, module version = 1.0.0
[ 45.987] Module class: X.Org Server Extension
[ 45.987] ABI class: X.Org Server Extension, version 4.0
[ 45.987](II) Loading extension DOUBLE-BUFFER
[ 45.987](II) LoadModule: "glx"
[ 45.991](II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 46.061](II) Module glx: vendor="X.Org Foundation"
[ 46.173] compiled for 1.9.2, module version = 1.0.0
[ 46.173] ABI class: X.Org Server Extension, version 4.0
[ 46.190](==) AIGLX enabled
[ 46.190](II) Loading extension GLX
[ 46.190](II) LoadModule: "record"
[ 46.194](II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 46.229](II) Module record: vendor="X.Org Foundation"
[ 46.229] compiled for 1.9.2, module version = 1.13.0
[ 46.229] Module class: X.Org Server Extension
[ 46.229] ABI class: X.Org Server Extension, version 4.0
[ 46.229](II) Loading extension RECORD
[ 46.229](II) LoadModule: "dri"
[ 46.233](II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 46.282](II) Module dri: vendor="X.Org Foundation"
[ 46.282] compiled for 1.9.2, module version = 1.0.0
[ 46.282] ABI class: X.Org Server Extension, version 4.0
[ 46.327](II) Loading extension XFree86-DRI
[ 46.327](II) LoadModule: "dri2"
[ 46.331](II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 46.365](II) Module dri2: vendor="X.Org Foundation"
[ 46.365] compiled for 1.9.2, module version = 1.2.0
[ 46.365] ABI class: X.Org Server Extension, version 4.0
[ 46.365](II) Loading extension DRI2
[ 46.365](II) LoadModule: "intel"
[ 46.367](II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 46.747](II) Module intel: vendor="X.Org Foundation"
[ 46.747] compiled for 1.9.2, module version = 2.9.1
[ 46.748] Module class: X.Org Video Driver
[ 46.748] ABI class: X.Org Video Driver, version 8.0
[ 46.777](II) LoadModule: "mouse"
[ 46.779](II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 46.870](II) Module mouse: vendor="X.Org Foundation"
[ 46.870] compiled for 1.9.2, module version = 1.6.0
[ 46.870] Module class: X.Org XInput Driver
[ 46.870] ABI class: X.Org XInput driver, version 11.0
[ 46.870](II) LoadModule: "kbd"
[ 46.872](II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 46.937](II) Module kbd: vendor="X.Org Foundation"
[ 46.937] compiled for 1.9.2, module version = 1.5.0
[ 46.937] Module class: X.Org XInput Driver
[ 46.938] ABI class: X.Org XInput driver, version 11.0
[ 46.953](II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 46.955](--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 46.955](--) using VT number 5
[ 47.041](WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 47.079](II) Loading sub module "vgahw"
[ 47.079](II) LoadModule: "vgahw"
[ 47.152](II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 47.223](II) Module vgahw: vendor="X.Org Foundation"
[ 47.223] compiled for 1.9.2, module version = 0.1.0
[ 47.223] ABI class: X.Org Video Driver, version 8.0
[ 47.223](II) Loading sub module "ramdac"
[ 47.223](II) LoadModule: "ramdac"
[ 47.223](II) Module "ramdac" already built-in
[ 47.224] drmOpenDevice: node name is /dev/dri/card0
[ 47.224] drmOpenDevice: open result is 11, (OK)
[ 47.224] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 47.224] drmOpenDevice: node name is /dev/dri/card0
[ 47.224] drmOpenDevice: open result is 11, (OK)
[ 47.224] drmOpenByBusid: drmOpenMinor returns 11
[ 47.224] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 47.224](II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
[ 47.224](==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 47.224](==) intel(0): RGB weight 888
[ 47.224](==) intel(0): Default visual is TrueColor
[ 47.225](II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[ 47.225](--) intel(0): Chipset: "915GM"
[ 47.225](--) intel(0): Linear framebuffer at 0xC0000000
[ 47.225](--) intel(0): IO registers at addr 0xB0080000 size 524288
[ 47.233](WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 47.299](II) intel(0): No SDVO device is found in VBT
[ 47.368](II) intel(0): 2 display pipes available.
[ 47.371](II) Loading sub module "ddc"
[ 47.371](II) LoadModule: "ddc"
[ 47.371](II) Module "ddc" already built-in
[ 47.371](II) Loading sub module "i2c"
[ 47.371](II) LoadModule: "i2c"
[ 47.371](II) Module "i2c" already built-in
[ 47.432](II) intel(0): Output VGA has no monitor section
[ 47.433](II) intel(0): Output LVDS has no monitor section
[ 47.457](II) intel(0): I2C bus "LVDSDDC_C" initialized.
[ 47.457](II) intel(0): Attempting to determine panel fixed mode.
[ 47.457](II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
[ 47.463](II) intel(0): EDID for output LVDS
[ 47.514](II) intel(0): Output TV has no monitor section
[ 47.515](WW) intel(0): remove MTRR a0000 - b0000
[ 47.884](II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 47.885](II) intel(0): I2C bus "CRTDDC_A" removed.
[ 48.595](II) intel(0): EDID for output VGA
[ 48.600](II) intel(0): EDID for output LVDS
[ 48.601](II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
[ 48.601](II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
[ 48.601](II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
[ 48.601](II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 48.601](II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 48.601](II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 48.601](II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 48.601](II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 48.601](II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 48.601](II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 48.601](II) intel(0): Not using default mode "Gpu hang with glxgears
Running glxgears works for a few seconds and then freezes the X server (sort of). Switching to console VT is still possible, though.
startx log
/usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 1: Input/output error (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Input/output error.
/var/log/messages
/netbsd: inteldrm0: gpu hung!
/var/log/Xorg.0.log
[ 103.395]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 103.395] X Protocol Version 11, Revision 0
[ 103.395] Build Operating System: NetBSD/i386 -
[ 103.395] Current Operating System: NetBSD niagara 5.99.44 NetBSD 5.99.44 (GENERIC) #6: Fri Jan 28 15:37:52 CET 2011 sutre@niagara:/usr/src/sys/arch/i386/compile/GENERIC i386
[ 103.396] Build Date: 23 November 2010 01:33:05AM
[ 103.396]
[ 103.396] Current version of pixman: 0.21.2
[ 103.396] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 103.396] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 103.397] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 28 16:08:11 2011
[ 103.397] (II) Loader magic: 0x82277dc
[ 103.397] (II) Module ABI versions:
[ 103.397] X.Org ANSI C Emulation: 0.4
[ 103.397] X.Org Video Driver: 8.0
[ 103.397] X.Org XInput driver : 11.0
[ 103.398] X.Org Server Extension : 4.0
[ 103.403] (--) PCI:*(0:0:2:0) 8086:2592:10cf:12e2 rev 4, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001400/8
[ 103.403] (--) PCI: (0:0:2:1) 8086:2792:10cf:12e2 rev 4, Mem @ 0x00000000/524288
[ 103.404] (==) Using default built-in configuration (30 lines)
[ 103.404] (==) --- Start of built-in configuration ---
[ 103.404] Section "Device"
[ 103.404] Identifier "Builtin Default intel Device 0"
[ 103.404] Driver "intel"
[ 103.404] EndSection
[ 103.404] Section "Screen"
[ 103.404] Identifier "Builtin Default intel Screen 0"
[ 103.404] Device "Builtin Default intel Device 0"
[ 103.404] EndSection
[ 103.404] Section "Device"
[ 103.404] Identifier "Builtin Default vesa Device 0"
[ 103.404] Driver "vesa"
[ 103.404] EndSection
[ 103.404] Section "Screen"
[ 103.404] Identifier "Builtin Default vesa Screen 0"
[ 103.404] Device "Builtin Default vesa Device 0"
[ 103.404] EndSection
[ 103.404] Section "Device"
[ 103.404] Identifier "Builtin Default fbdev Device 0"
[ 103.404] Driver "fbdev"
[ 103.404] EndSection
[ 103.404] Section "Screen"
[ 103.404] Identifier "Builtin Default fbdev Screen 0"
[ 103.405] Device "Builtin Default fbdev Device 0"
[ 103.405] EndSection
[ 103.405] Section "ServerLayout"
[ 103.405] Identifier "Builtin Default Layout"
[ 103.405] Screen "Builtin Default intel Screen 0"
[ 103.405] Screen "Builtin Default vesa Screen 0"
[ 103.405] Screen "Builtin Default fbdev Screen 0"
[ 103.405] EndSection
[ 103.405] (==) --- End of built-in configuration ---
[ 103.405] (==) ServerLayout "Builtin Default Layout"
[ 103.405] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 103.405] (**) | |-->Monitor ""
[ 103.406] (**) | |-->Device "Builtin Default intel Device 0"
[ 103.406] (==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
[ 103.406] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
[ 103.406] (**) | |-->Monitor ""
[ 103.407] (**) | |-->Device "Builtin Default vesa Device 0"
[ 103.407] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
[ 103.407] (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
[ 103.407] (**) | |-->Monitor ""
[ 103.407] (**) | |-->Device "Builtin Default fbdev Device 0"
[ 103.407] (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
[ 103.407] (==) Not automatically adding devices
[ 103.407] (==) Not automatically enabling devices
[ 103.408] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 103.408] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 103.408] (==) |-->Input Device ""
[ 103.408] (==) |-->Input Device ""
[ 103.408] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 103.408] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 103.408] (II) LoadModule: "extmod"
[ 103.412] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 103.413] (II) Module extmod: vendor="X.Org Foundation"
[ 103.413] compiled for 1.9.2, module version = 1.0.0
[ 103.413] Module class: X.Org Server Extension
[ 103.413] ABI class: X.Org Server Extension, version 4.0
[ 103.413] (II) Loading extension MIT-SCREEN-SAVER
[ 103.413] (II) Loading extension XFree86-VidModeExtension
[ 103.413] (II) Loading extension XFree86-DGA
[ 103.413] (II) Loading extension DPMS
[ 103.414] (II) Loading extension XVideo
[ 103.414] (II) Loading extension XVideo-MotionCompensation
[ 103.414] (II) Loading extension X-Resource
[ 103.414] (II) LoadModule: "dbe"
[ 103.417] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 103.418] (II) Module dbe: vendor="X.Org Foundation"
[ 103.418] compiled for 1.9.2, module version = 1.0.0
[ 103.418] Module class: X.Org Server Extension
[ 103.418] ABI class: X.Org Server Extension, version 4.0
[ 103.418] (II) Loading extension DOUBLE-BUFFER
[ 103.418] (II) LoadModule: "glx"
[ 103.422] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 103.422] (II) Module glx: vendor="X.Org Foundation"
[ 103.422] compiled for 1.9.2, module version = 1.0.0
[ 103.422] ABI class: X.Org Server Extension, version 4.0
[ 103.422] (==) AIGLX enabled
[ 103.422] (II) Loading extension GLX
[ 103.422] (II) LoadModule: "record"
[ 103.427] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 103.427] (II) Module record: vendor="X.Org Foundation"
[ 103.459] compiled for 1.9.2, module version = 1.13.0
[ 103.459] Module class: X.Org Server Extension
[ 103.459] ABI class: X.Org Server Extension, version 4.0
[ 103.459] (II) Loading extension RECORD
[ 103.459] (II) LoadModule: "dri"
[ 103.463] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 103.463] (II) Module dri: vendor="X.Org Foundation"
[ 103.464] compiled for 1.9.2, module version = 1.0.0
[ 103.464] ABI class: X.Org Server Extension, version 4.0
[ 103.464] (II) Loading extension XFree86-DRI
[ 103.464] (II) LoadModule: "dri2"
[ 103.467] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 103.468] (II) Module dri2: vendor="X.Org Foundation"
[ 103.468] compiled for 1.9.2, module version = 1.2.0
[ 103.468] ABI class: X.Org Server Extension, version 4.0
[ 103.468] (II) Loading extension DRI2
[ 103.468] (II) LoadModule: "intel"
[ 103.470] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 103.471] (II) Module intel: vendor="X.Org Foundation"
[ 103.471] compiled for 1.9.2, module version = 2.9.1
[ 103.472] Module class: X.Org Video Driver
[ 103.472] ABI class: X.Org Video Driver, version 8.0
[ 103.472] (II) LoadModule: "vesa"
[ 103.475] (II) Loading /usr/X11R7/lib/modules/drivers/vesa_drv.so
[ 103.475] (II) Module vesa: vendor="X.Org Foundation"
[ 103.475] compiled for 1.9.2, module version = 2.3.0
[ 103.475] Module class: X.Org Video Driver
[ 103.475] ABI class: X.Org Video Driver, version 8.0
[ 103.475] (II) LoadModule: "fbdev"
[ 103.484] (WW) Warning, couldn't open module fbdev
[ 103.484] (II) UnloadModule: "fbdev"
[ 103.484] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 103.484] (II) LoadModule: "mouse"
[ 103.486] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 103.486] (II) Module mouse: vendor="X.Org Foundation"
[ 103.486] compiled for 1.9.2, module version = 1.6.0
[ 103.487] Module class: X.Org XInput Driver
[ 103.487] ABI class: X.Org XInput driver, version 11.0
[ 103.487] (II) LoadModule: "kbd"
[ 103.489] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 103.489] (II) Module kbd: vendor="X.Org Foundation"
[ 103.489] compiled for 1.9.2, module version = 1.5.0
[ 103.489] Module class: X.Org XInput Driver
[ 103.489] ABI class: X.Org XInput driver, version 11.0
[ 103.489] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 103.491] (II) VESA: driver for VESA chipsets: vesa
[ 103.491] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 103.491] (--) using VT number 5
[ 103.499] (WW) Falling back to old probe method for vesa
[ 103.499] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 103.499] (II) Loading sub module "vgahw"
[ 103.500] (II) LoadModule: "vgahw"
[ 103.504] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 103.505] (II) Module vgahw: vendor="X.Org Foundation"
[ 103.505] compiled for 1.9.2, module version = 0.1.0
[ 103.505] ABI class: X.Org Video Driver, version 8.0
[ 103.505] (II) Loading sub module "ramdac"
[ 103.505] (II) LoadModule: "ramdac"
[ 103.505] (II) Module "ramdac" already built-in
[ 103.505] drmOpenDevice: node name is /dev/dri/card0
[ 103.505] drmOpenDevice: open result is 10, (OK)
[ 103.506] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 103.506] drmOpenDevice: node name is /dev/dri/card0
[ 103.506] drmOpenDevice: open result is 10, (OK)
[ 103.506] drmOpenByBusid: drmOpenMinor returns 10
[ 103.506] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 103.506] (II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
[ 103.506] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 103.506] (==) intel(0): RGB weight 888
[ 103.506] (==) intel(0): Default visual is TrueColor
[ 103.506] (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[ 103.506] (--) intel(0): Chipset: "915GM"
[ 103.506] (--) intel(0): Linear framebuffer at 0xC0000000
[ 103.506] (--) intel(0): IO registers at addr 0xB0080000 size 524288
[ 103.506] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 103.507] (II) intel(0): No SDVO device is found in VBT
[ 103.507] (II) intel(0): 2 display pipes available.
[ 103.507] (II) Loading sub module "ddc"
[ 103.507] (II) LoadModule: "ddc"
[ 103.508] (II) Module "ddc" already built-in
[ 103.508] (II) Loading sub module "i2c"
[ 103.508] (II) LoadModule: "i2c"
[ 103.508] (II) Module "i2c" already built-in
[ 103.508] (II) intel(0): Output VGA has no monitor section
[ 103.508] (II) intel(0): Output LVDS has no monitor section
[ 103.508] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[ 103.508] (II) intel(0): Attempting to determine panel fixed mode.
[ 103.508] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
[ 103.514] (II) intel(0): EDID for output LVDS
[ 103.514] (II) intel(0): Output TV has no monitor section
[ 103.514] (WW) intel(0): remove MTRR a0000 - b0000
[ 103.897] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 103.898] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 104.608] (II) intel(0): EDID for output VGA
[ 104.613] (II) intel(0): EDID for output LVDS
[ 104.614] (II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "1024x768i" (interlace mode not supported)
[ 104.614] (II) intel(0): Not using default mode "512x384i" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 104.614] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
[ 104.615] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
[ 104.615] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
[ 104.615] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[ 104.615] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[ 104.615] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[ 104.615] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 104.615] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 104.615] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 104.615] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 104.615] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 104.616] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 104.616] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 104.616] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 104.616] (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
[ 104.616] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 104.616] (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
[ 104.616] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 104.616] (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
[ 104.616] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 104.616] (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
[ 104.616] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 104.616] (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[ 104.616] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 104.616] (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[ 104.616] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 104.616] (II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
[ 104.616] (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[ 104.616] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 104.616] (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[ 104.616] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 104.616] (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[ 104.617] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 104.617] (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[ 104.617] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 104.617] (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[ 104.617] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 104.617] (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[ 104.617] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 104.617] (II) intel(0): Printing probed modes for output LVDS
[ 104.617] (II) intel(0): Modeline "1280x768"x59.8 81.00 1280 1328 1440 1688 768 771 777 802 (48.0 kHz)
[ 104.617] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 104.617] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 104.617] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 104.617] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 104.617] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 104.617] (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 104.617] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 104.617] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 104.618] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 104.618] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 104.618] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 104.618] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 104.618] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 104.618] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 104.618] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
[ 104.618] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
[ 104.618] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
[ 105.258] (II) intel(0): EDID for output TV
[ 105.258] (II) intel(0): Output VGA disconnected
[ 105.258] (II) intel(0): Output LVDS connected
[ 105.258] (II) intel(0): Output TV disconnected
[ 105.258] (II) intel(0): Using exact sizes for initial modes
[ 105.258] (II) intel(0): Output LVDS using initial mode 1280x768
[ 105.258] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 105.258]
##############################################
*** In function RestoreHWState, on line 1900, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 105.258] RestoreHWState
[ 105.258] ##############################################
[ 105.758] (WW) intel(0): remove MTRR a0000 - b0000
[ 105.798] (II) intel(0): detected 256 kB GTT.
[ 105.798] (II) intel(0): detected 7932 kB stolen memory.
[ 105.798] (==) intel(0): video overlay key set to 0x101fe
[ 105.798] (==) intel(0): DPI set to (96, 96)
[ 105.798] (II) Loading sub module "fb"
[ 105.798] (II) LoadModule: "fb"
[ 105.803] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 105.803] (II) Module fb: vendor="X.Org Foundation"
[ 105.803] compiled for 1.9.2, module version = 1.0.0
[ 105.803] ABI class: X.Org ANSI C Emulation, version 0.4
[ 105.803] (II) UnloadModule: "vesa"
[ 105.804] (II) Unloading /usr/X11R7/lib/modules/drivers/vesa_drv.so
[ 105.804] (==) Depth 24 pixmap format is 32 bpp
[ 105.804] (II) intel(0): Kernel reported 491520 total, 0 used
[ 105.804] (II) intel(0): I830CheckAvailableMemory: 1966080 kB available
[ 105.804] (II) intel(0): [DRI2] Setup complete
[ 105.804] (II) intel(0): [DRI2] DRI driver: i915
[ 105.804] (**) intel(0): Framebuffer compression disabled
[ 105.804] (**) intel(0): Tiling enabled
[ 105.804] (**) intel(0): SwapBuffers wait enabled
[ 105.854] (==) intel(0): VideoRam: 262144 KB
[ 105.854] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 105.854] (II) intel(0): Tiled allocation successful.
[ 105.854] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 105.855]
##############################################
*** In function I830ScreenInit, on line 2641, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 105.855] assert( if(!vgaHWMapMem(scrn)) )
[ 105.855] ##############################################
[ 105.855] (WW) intel(0): remove MTRR a0000 - b0000
[ 105.856]
##############################################
*** In function I830ScreenInit, on line 2646, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 105.856] assert( if(!I830EnterVT(scrnIndex, 0)) )
[ 105.856] ##############################################
[ 105.856]
##############################################
*** In function I830ScreenInit, on line 2657, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 105.856] assert( if(!fbScreenInit(screen, ...) )
[ 105.856] ##############################################
[ 105.857] (II) UXA(0): Driver registered support for the following operations:
[ 105.857] (II) solid
[ 105.857] (II) copy
[ 105.857] (II) composite (RENDER acceleration)
[ 105.857] (II) put_image
[ 105.857] (II) get_image
[ 105.857] (==) intel(0): Backing store disabled
[ 105.857] (==) intel(0): Silken mouse enabled
[ 105.857] (II) intel(0): Initializing HW Cursor
[ 105.857]
##############################################
*** In function I830EnterVT, on line 2886, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 105.882] Enter VT
[ 105.882] ##############################################
[ 105.982] (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
[ 106.782] (II) intel(0): Fixed memory allocation layout:
[ 106.783] (II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000005f800000 physical
)
[ 106.783] (II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000005f80a000 physical
)
[ 106.783] (II) intel(0): 0x007bf000: end of stolen memory
[ 106.783] (II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
[ 106.783] (II) intel(0): 0x10000000: end of aperture
[ 106.783] (II) intel(0): BO memory allocation layout:
[ 106.783] (II) intel(0): 0x007bf000: start of memory manager
[ 106.783] (II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
[ 106.783] (II) intel(0): 0x0fff5000: end of memory manager
[ 106.783]
##############################################
*** In function I830InitHWCursor, on line 82, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_cursor.c ***
[ 106.783] I830InitHWCursor
[ 106.783] ##############################################
[ 107.009] (II) intel(0): using SSC reference clock of 96 MHz
[ 107.029] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[ 107.449] (II) intel(0): Output configuration:
[ 107.449] (II) intel(0): Pipe A is off
[ 107.449] (II) intel(0): Display plane B is now disabled and connected to pipe A.
[ 107.449] (II) intel(0): Pipe B is on
[ 107.449] (II) intel(0): Display plane A is now enabled and connected to pipe B.
[ 107.449] (II) intel(0): Output VGA is connected to pipe none
[ 107.449] (II) intel(0): Output LVDS is connected to pipe B
[ 107.450] (II) intel(0): Output TV is connected to pipe none
[ 107.450] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 107.450]
##############################################
*** In function I830ScreenInit, on line 2726, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 107.450] assert( if(!miCreateDefColormap(screen)) )
[ 107.450] ##############################################
[ 107.450]
##############################################
*** In function I830ScreenInit, on line 2730, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 107.450] assert( if(!xf86HandleColormaps(screen, ...)) )
[ 107.450] ##############################################
[ 107.450] (==) intel(0): DPMS enabled
[ 107.450] (II) intel(0): Set up textured video
[ 107.450] (II) intel(0): Set up overlay video
[ 107.450] (II) intel(0): direct rendering: DRI2 Enabled
[ 107.451] (--) RandR disabled
[ 107.451] (II) Initializing built-in extension Generic Event Extension
[ 107.451] (II) Initializing built-in extension SHAPE
[ 107.451] (II) Initializing built-in extension MIT-SHM
[ 107.451] (II) Initializing built-in extension XInputExtension
[ 107.451] (II) Initializing built-in extension XTEST
[ 107.451] (II) Initializing built-in extension BIG-REQUESTS
[ 107.451] (II) Initializing built-in extension SYNC
[ 107.451] (II) Initializing built-in extension XKEYBOARD
[ 107.451] (II) Initializing built-in extension XC-MISC
[ 107.451] (II) Initializing built-in extension SECURITY
[ 107.451] (II) Initializing built-in extension XINERAMA
[ 107.451] (II) Initializing built-in extension XFIXES
[ 107.451] (II) Initializing built-in extension XFree86-Bigfont
[ 107.451] (II) Initializing built-in extension RENDER
[ 107.451] (II) Initializing built-in extension RANDR
[ 107.451] (II) Initializing built-in extension COMPOSITE
[ 107.451] (II) Initializing built-in extension DAMAGE
[ 107.478] (II) AIGLX: Screen 0 is not DRI capable
[ 107.497] (II) AIGLX: Loaded and initialized /usr/X11R7/lib/modules/dri/swrast_dri.so
[ 107.497] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 107.499] (II) intel(0): Setting screen physical size to 338 x 203
[ 107.881] (WW) : No Device specified, looking for one...
[ 107.884] (II) : found Device "/dev/wsmouse"
[ 107.920] (**) : Protocol: WSMouse
[ 107.920] (**) Option "CorePointer"
[ 107.920] (**) : always reports core events
[ 107.920] (**) Option "Device" "/dev/wsmouse"
[ 107.960] (==) : Emulate3Buttons, Emulate3Timeout: 50
[ 107.960] (**) : ZAxisMapping: buttons 4 and 5
[ 107.960] (**) : Buttons: 9
[ 107.960] (II) XINPUT: Adding extended input device "" (type: MOUSE)
[ 107.960] (**) : (accel) keeping acceleration scheme 1
[ 107.960] (**) : (accel) acceleration profile 0
[ 107.960] (**) : (accel) acceleration factor: 2.000
[ 107.960] (**) : (accel) acceleration threshold: 4
[ 107.963] (**) Option "CoreKeyboard"
[ 107.963] (**) : always reports core events
[ 107.963] (**) Option "Protocol" "standard"
[ 107.963] (**) : Protocol: standard
[ 107.963] (**) Option "XkbRules" "base"
[ 107.964] (**) : XkbRules: "base"
[ 107.964] (**) Option "XkbModel" "pc105"
[ 107.964] (**) : XkbModel: "pc105"
[ 107.964] (**) Option "XkbLayout" "us"
[ 107.964] (**) : XkbLayout: "us"
[ 107.964] (**) Option "CustomKeycodes" "off"
[ 107.964] (**) : CustomKeycodes disabled
[ 107.964] (II) XINPUT: Adding extended input device "" (type: KEYBOARD)
[ 127.392] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 127.396] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Input/output error.
[ 140.680] (II) UnloadModule: "mouse"
[ 140.680] (II) UnloadModule: "kbd"
[ 140.681]
##############################################
*** In function I830LeaveVT, on line 2824, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 140.681] Leave VT
[ 140.681] ##############################################
[ 140.681]
##############################################
*** In function RestoreHWState, on line 1900, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 140.681] RestoreHWState
[ 140.681] ##############################################
[ 142.094]
##############################################
*** In function I830CloseScreen, on line 3013, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 142.094]
Unmapping memory
[ 142.094] ##############################################
dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.44 (GENERIC) #6: Fri Jan 28 15:37:52 CET 2011
sutre@niagara:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 1526 MB
avail memory = 1488 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
FUJITSU SIEMENS LIFEBOOK P7120 ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) M processor 1.20GHz, id 0x6d8
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20100528
acpi0: X/RSDT: OemId , AslId
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
CPU0 (ACPI Object Type 'Processor') at acpi0 not configured
MCFG (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: 1 15 29 43 57 71 85 100
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x0300): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0, bios detect
acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
acpivga0: 0x0300 (acpiout3): Unknown Output Device, head 0, bios detect
MBIO (PNP0C02) at acpi0 not configured
fujbp0 at acpi0 (FJEX, FUJ02B1): Fujitsu Brightness & Pointer
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
fujhk0 at acpi0 (FEXT, FUJ02E3): Fujitsu Hotkeys
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (CMB1, PNP0C0A-1): ACPI Battery
acpibat0: Fujitsu LION rechargeable battery
acpibat0: model number CP234019, serial number 1
acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah
acpibat1 at acpi0 (CMB2, PNP0C0A-2): ACPI Battery
acpibat1: Fujitsu LION rechargeable battery
acpibat1: model number CP194250 / CP194251, serial number 2
acpibat1: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah
acpitz0 at acpi0 (TZ00)
acpitz0: levels: critical 105.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Up/down buttons, Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2590 (rev. 0x04)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
inteldrm0 at vga1: ioapic0 pin 16
drmdev0 at inteldrm0
vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: Realtek ALC260
hdafg0: duplicate pin in association
hdafg0: ADC01 2ch: Line In [Built-In], AUX [Built-In], Mic In [Jack]
hdafg0: 0ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
hdvsmfg at hdaudio0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4)
pci1 at ppb0 bus 6
pci1: i/o space, memory space enabled
cbb0 at pci1 dev 3 function 0: vendor 0x1180 product 0x0476 (rev. 0xb3)
fwohci0 at pci1 dev 3 function 1: vendor 0x1180 product 0x0552 (rev. 0x08)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:0e:10:03:8b:4c:05
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci1 dev 3 function 2: vendor 0x1180 product 0x0822 (rev. 0x17)
sdhc0: interrupting at ioapic0 pin 16
sdmmc0 at sdhc0
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x08) at pci1 dev 3 function 3 not configured
vendor 0x1180 product 0x0852 (miscellaneous system, revision 0x03) at pci1 dev 3 function 4 not configured
rtk0 at pci1 dev 4 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20
rtk0: Ethernet address 00:17:42:02:39:db
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
iwi0 at pci1 dev 5 function 0: vendor 0x8086 product 0x4223 (rev. 0x05)
iwi0: interrupting at ioapic0 pin 18
iwi0: 802.11 address 00:16:6f:75:e7:5f
iwi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 7
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2641 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
gpiobus at ichlpcib0 not configured
piixide0 at pci0 dev 31 function 1: Intel 82801FB IDE Controller (ICH6) (rev. 0x04)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus0 drive 0:
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: LITEON Technology USB Multimedia Keyboard, rev 1.10/1.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
uhidev1 at uhub1 port 1 configuration 1 interface 0
uhidev1: Logitech USB RECEIVER, rev 1.10/25.10, addr 2, iclass 3/1
ums0 at uhidev1: 16 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 2 configuration 1 interface 1
uhidev2: LITEON Technology USB Multimedia Keyboard, rev 1.10/1.01, addr 2, iclass 3/0
uhidev2: 1 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ugen0 at uhub2 port 1
ugen0: AuthenTec Fingerprint Sensor, rev 1.10/6.21, addr 2
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
Display become garbled, again
Hello,
After running X for ~15 hours, I have tried to open many images at the same time in the Firefox. The system has hang up for some seconds (and mplayer stopped playing), but then returned but display was garbled. netbsd-drmgem rev 35f9144, NetBSD 5.99.56 amd64
Xorg.0.log
[ 19.929]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 19.929] X Protocol Version 11, Revision 0
[ 19.929] Build Operating System: NetBSD/amd64 -
[ 19.929] Current Operating System: NetBSD vault 5.99.56 NetBSD 5.99.56 (GENERIC) #2: Mon Oct 17 04:31:52 MSK 2011 dm@vault:/usr/obj/sys/arch/amd64/compile/GENERIC amd64
[ 19.929] Build Date: 01 August 2011 01:01:00AM
[ 19.930]
[ 19.930] Current version of pixman: 0.23.2
[ 19.930] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 19.930] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.930] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 3 01:27:35 2011
[ 19.937] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.953] (==) ServerLayout "X.org Configured"
[ 19.953] (**) |-->Screen "Screen0" (0)
[ 19.953] (**) | |-->Monitor "Monitor0"
[ 19.962] (**) | |-->Device "Card0"
[ 19.962] (**) |-->Screen "Screen1" (1)
[ 19.962] (**) | |-->Monitor "Monitor1"
[ 19.962] (**) | |-->Device "Card1"
[ 19.962] (**) |-->Input Device "Mouse0"
[ 19.962] (**) |-->Input Device "Keyboard0"
[ 19.962] (==) Not automatically adding devices
[ 19.962] (==) Not automatically enabling devices
[ 19.997] (WW) `fonts.dir' not found (or not valid) in "/usr/X11R7/lib/X11/fonts/cyrillic/".
[ 19.997] Entry deleted from font path.
[ 19.997] (Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/cyrillic/").
[ 19.997] (**) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/,
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 19.997] (**) ModulePath set to "/usr/X11R7/lib/modules"
[ 20.008] (II) Loader magic: 0x82fc60
[ 20.008] (II) Module ABI versions:
[ 20.008] X.Org ANSI C Emulation: 0.4
[ 20.008] X.Org Video Driver: 10.0
[ 20.008] X.Org XInput driver : 12.2
[ 20.008] X.Org Server Extension : 5.0
[ 20.014] (--) PCI:*(0:0:2:0) 8086:2e32:1462:7592 rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000cc00/8
[ 20.014] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 20.014] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 20.014] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 20.014] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 20.014] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 20.014] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 20.014] (II) LoadModule: "dbe"
[ 20.063] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 20.077] (II) Module dbe: vendor="X.Org Foundation"
[ 20.077] compiled for 1.10.3, module version = 1.0.0
[ 20.077] Module class: X.Org Server Extension
[ 20.077] ABI class: X.Org Server Extension, version 5.0
[ 20.077] (II) Loading extension DOUBLE-BUFFER
[ 20.077] (II) LoadModule: "dri"
[ 20.078] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 20.086] (II) Module dri: vendor="X.Org Foundation"
[ 20.092] compiled for 1.10.3, module version = 1.0.0
[ 20.092] ABI class: X.Org Server Extension, version 5.0
[ 20.097] (II) Loading extension XFree86-DRI
[ 20.097] (II) LoadModule: "dri2"
[ 20.098] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 20.105] (II) Module dri2: vendor="X.Org Foundation"
[ 20.106] compiled for 1.10.3, module version = 1.2.0
[ 20.106] ABI class: X.Org Server Extension, version 5.0
[ 20.106] (II) Loading extension DRI2
[ 20.106] (II) LoadModule: "extmod"
[ 20.106] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 20.115] (II) Module extmod: vendor="X.Org Foundation"
[ 20.115] compiled for 1.10.3, module version = 1.0.0
[ 20.115] Module class: X.Org Server Extension
[ 20.115] ABI class: X.Org Server Extension, version 5.0
[ 20.115] (II) Loading extension MIT-SCREEN-SAVER
[ 20.115] (II) Loading extension XFree86-VidModeExtension
[ 20.115] (II) Loading extension XFree86-DGA
[ 20.116] (II) Loading extension DPMS
[ 20.116] (II) Loading extension XVideo
[ 20.116] (II) Loading extension XVideo-MotionCompensation
[ 20.116] (II) Loading extension X-Resource
[ 20.116] (II) LoadModule: "glx"
[ 20.117] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 20.125] (II) Module glx: vendor="X.Org Foundation"
[ 20.125] compiled for 1.10.3, module version = 1.0.0
[ 20.125] ABI class: X.Org Server Extension, version 5.0
[ 20.129] (==) AIGLX enabled
[ 20.129] (II) Loading extension GLX
[ 20.129] (II) LoadModule: "record"
[ 20.130] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 20.133] (II) Module record: vendor="X.Org Foundation"
[ 20.133] compiled for 1.10.3, module version = 1.13.0
[ 20.133] Module class: X.Org Server Extension
[ 20.133] ABI class: X.Org Server Extension, version 5.0
[ 20.134] (II) Loading extension RECORD
[ 20.134] (II) LoadModule: "shadow"
[ 20.135] (II) Loading /usr/X11R7/lib/modules/extensions/libshadow.so
[ 20.139] (II) Module shadow: vendor="X.Org Foundation"
[ 20.139] compiled for 1.10.3, module version = 1.1.0
[ 20.139] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.139] (II) LoadModule: "intel"
[ 20.139] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 20.169] (II) Module intel: vendor="X.Org Foundation"
[ 20.169] compiled for 1.10.3, module version = 2.9.1
[ 20.169] Module class: X.Org Video Driver
[ 20.169] ABI class: X.Org Video Driver, version 10.0
[ 20.169] (II) LoadModule: "vesa"
[ 20.170] (II) Loading /usr/X11R7/lib/modules/drivers/vesa_drv.so
[ 20.187] (II) Module vesa: vendor="X.Org Foundation"
[ 20.187] compiled for 1.10.3, module version = 2.3.0
[ 20.187] Module class: X.Org Video Driver
[ 20.187] ABI class: X.Org Video Driver, version 10.0
[ 20.187] (II) LoadModule: "mouse"
[ 20.188] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 20.193] (II) Module mouse: vendor="X.Org Foundation"
[ 20.193] compiled for 1.10.3, module version = 1.7.1
[ 20.193] Module class: X.Org XInput Driver
[ 20.193] ABI class: X.Org XInput driver, version 12.2
[ 20.193] (II) LoadModule: "kbd"
[ 20.194] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 20.204] (II) Module kbd: vendor="X.Org Foundation"
[ 20.204] compiled for 1.10.3, module version = 1.6.0
[ 20.204] Module class: X.Org XInput Driver
[ 20.204] ABI class: X.Org XInput driver, version 12.2
[ 20.204] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 20.205] (II) VESA: driver for VESA chipsets: vesa
[ 20.205] (--) Using wscons driver on /dev/ttyE0 in pcvt compatibility mode (version 3.32)
[ 20.205] (--) using VT number 1
[ 20.205] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 20.205] (WW) Falling back to old probe method for vesa
[ 20.205] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 20.206] (II) Loading sub module "vgahw"
[ 20.206] (II) LoadModule: "vgahw"
[ 20.211] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 20.215] (II) Module vgahw: vendor="X.Org Foundation"
[ 20.215] compiled for 1.10.3, module version = 0.1.0
[ 20.215] ABI class: X.Org Video Driver, version 10.0
[ 20.215] (II) Loading sub module "ramdac"
[ 20.215] (II) LoadModule: "ramdac"
[ 20.215] (II) Module "ramdac" already built-in
[ 20.216] drmOpenDevice: node name is /dev/dri/card0
[ 20.216] drmOpenDevice: open result is 13, (OK)
[ 20.216] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 20.216] drmOpenDevice: node name is /dev/dri/card0
[ 20.216] drmOpenDevice: open result is 13, (OK)
[ 20.216] drmOpenByBusid: drmOpenMinor returns 13
[ 20.216] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 20.216] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 20.216] (==) intel(0): RGB weight 888
[ 20.216] (==) intel(0): Default visual is TrueColor
[ 20.216] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41
[ 20.216] (--) intel(0): Chipset: "G41"
[ 20.216] (--) intel(0): Linear framebuffer at 0xD0000000
[ 20.216] (--) intel(0): IO registers at addr 0xFE400000 size 4194304
[ 20.216] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 20.216] (II) intel(0): No SDVO device is found in VBT
[ 20.221] (II) intel(0): 2 display pipes available.
[ 20.221] (II) Loading sub module "ddc"
[ 20.221] (II) LoadModule: "ddc"
[ 20.221] (II) Module "ddc" already built-in
[ 20.221] (II) Loading sub module "i2c"
[ 20.221] (II) LoadModule: "i2c"
[ 20.221] (II) Module "i2c" already built-in
[ 20.240] (II) intel(0): Output VGA using monitor section Monitor0
[ 20.240] (WW) intel(0): remove MTRR a0000 - b0000
[ 20.320] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 20.320] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 20.369] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 20.369] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 20.369] (II) intel(0): EDID for output VGA
[ 20.369] (II) intel(0): Manufacturer: DEL Model: f010 Serial#: 827930700
[ 20.369] (II) intel(0): Year: 2010 Week: 49
[ 20.369] (II) intel(0): EDID Version: 1.3
[ 20.369] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 20.369] (II) intel(0): Sync: Separate
[ 20.369] (II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 20.369] (II) intel(0): Gamma: 2.20
[ 20.369] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 20.369] (II) intel(0): Default color space is primary color space
[ 20.369] (II) intel(0): First detailed timing is preferred mode
[ 20.369] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 20.369] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 20.369] (II) intel(0): Supported established timings:
[ 20.369] (II) intel(0): 720x400@70Hz
[ 20.369] (II) intel(0): 640x480@60Hz
[ 20.369] (II) intel(0): 640x480@75Hz
[ 20.369] (II) intel(0): 800x600@60Hz
[ 20.369] (II) intel(0): 800x600@75Hz
[ 20.369] (II) intel(0): 1024x768@60Hz
[ 20.369] (II) intel(0): 1024x768@75Hz
[ 20.369] (II) intel(0): 1280x1024@75Hz
[ 20.369] (II) intel(0): Manufacturer's mask: 0
[ 20.369] (II) intel(0): Supported standard timings:
[ 20.369] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 20.369] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 20.369] (II) intel(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 20.369] (II) intel(0): Supported detailed timing:
[ 20.370] (II) intel(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 20.370] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 20.370] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 20.370] (II) intel(0): Serial No: H735H0BU1Y8L
[ 20.370] (II) intel(0): Monitor name: DELL 2209WA
[ 20.370] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[ 20.370] (II) intel(0): EDID (in hex):
[ 20.370] (II) intel(0): 00ffffffffffff0010ac10f04c385931
[ 20.370] (II) intel(0): 31140103682f1e782eee95a3544c9926
[ 20.370] (II) intel(0): 0f5054a54b00714f8180b30001010101
[ 20.370] (II) intel(0): 01010101010121399030621a274068b0
[ 20.370] (II) intel(0): 3600da281100001c000000ff00483733
[ 20.370] (II) intel(0): 35483042553159384c0a000000fc0044
[ 20.370] (II) intel(0): 454c4c203232303957410a20000000fd
[ 20.370] (II) intel(0): 00384b1e5310000a20202020202000d4
[ 20.370] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 20.370] (II) intel(0): Using EDID range info for horizontal sync
[ 20.370] (II) intel(0): Using EDID range info for vertical refresh
[ 20.370] (II) intel(0): Printing DDC gathered Modelines:
[ 20.370] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 20.370] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 20.370] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 20.370] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.370] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 20.370] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 20.370] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 20.370] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 20.370] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 20.370] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 20.370] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 20.370] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 20.370] (II) intel(0): Printing probed modes for output VGA
[ 20.370] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 20.370] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 20.370] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 20.370] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 20.370] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 20.370] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 20.370] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 20.370] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 20.370] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 20.370] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.370] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 20.370] (II) intel(0): Output VGA connected
[ 20.370] (II) intel(0): Using exact sizes for initial modes
[ 20.370] (II) intel(0): Output VGA using initial mode 1680x1050
[ 20.370] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 20.370]
##############################################
*** In function RestoreHWState, on line 1902, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 20.370] RestoreHWState
[ 20.370] ##############################################
[ 20.887] (WW) intel(0): remove MTRR a0000 - b0000
[ 20.920] (II) intel(0): detected 512 kB GTT.
[ 20.920] (II) intel(0): detected 32764 kB stolen memory.
[ 20.920] (==) intel(0): video overlay key set to 0x101fe
[ 20.920] (**) intel(0): Display dimensions: (470, 300) mm
[ 20.920] (**) intel(0): DPI set to (90, 88)
[ 20.920] (II) Loading sub module "fb"
[ 20.920] (II) LoadModule: "fb"
[ 20.921] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 20.927] (II) Module fb: vendor="X.Org Foundation"
[ 20.927] compiled for 1.10.3, module version = 1.0.0
[ 20.927] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.927] (II) UnloadModule: "vesa"
[ 20.927] (II) Unloading vesa
[ 20.931] (==) Depth 24 pixmap format is 32 bpp
[ 20.932] (II) intel(0): Kernel reported 1006592 total, 0 used
[ 20.932] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available
[ 20.937] (II) intel(0): [DRI2] Setup complete
[ 20.937] (II) intel(0): [DRI2] DRI driver: i965
[ 20.937] (**) intel(0): Framebuffer compression disabled
[ 20.937] (**) intel(0): Tiling enabled
[ 20.937] (**) intel(0): SwapBuffers wait enabled
[ 20.995] (==) intel(0): VideoRam: 262144 KB
[ 20.995] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 20.995] (II) intel(0): Tiled allocation successful.
[ 20.995] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 20.995]
##############################################
*** In function I830ScreenInit, on line 2643, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 20.995] assert( if(!vgaHWMapMem(scrn)) )
[ 20.995] ##############################################
[ 20.995] (WW) intel(0): remove MTRR a0000 - b0000
[ 20.996]
##############################################
*** In function I830ScreenInit, on line 2648, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 20.996] assert( if(!I830EnterVT(scrnIndex, 0)) )
[ 20.996] ##############################################
[ 20.996]
##############################################
*** In function I830ScreenInit, on line 2659, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 20.996] assert( if(!fbScreenInit(screen, ...) )
[ 20.996] ##############################################
[ 21.039] (II) UXA(0): Driver registered support for the following operations:
[ 21.039] (II) solid
[ 21.039] (II) copy
[ 21.039] (II) composite (RENDER acceleration)
[ 21.039] (II) put_image
[ 21.039] (II) get_image
[ 21.039] (==) intel(0): Backing store disabled
[ 21.039] (==) intel(0): Silken mouse enabled
[ 21.040] (II) intel(0): Initializing HW Cursor
[ 21.041]
##############################################
*** In function I830EnterVT, on line 2888, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 21.041] Enter VT
[ 21.041] ##############################################
[ 21.352] (II) intel(0): Fixed memory allocation layout:
[ 21.352] (II) intel(0): 0x01fff000: end of stolen memory
[ 21.352] (II) intel(0): 0x01fff000-0x0fffffff: DRI memory manager (229380 kB)
[ 21.352] (II) intel(0): 0x10000000: end of aperture
[ 21.352] (II) intel(0): BO memory allocation layout:
[ 21.352] (II) intel(0): 0x01fff000: start of memory manager
[ 21.352] (II) intel(0): 0x02020000-0x0274dfff: front buffer (7352 kB) X tiled
[ 21.352] (II) intel(0): 0x02820000-0x02829fff: HW cursors (40 kB)
[ 21.352] (II) intel(0): 0x10000000: end of memory manager
[ 21.511]
##############################################
*** In function I830InitHWCursor, on line 82, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_cursor.c ***
[ 21.511] I830InitHWCursor
[ 21.511] ##############################################
[ 21.876] (II) intel(0): Output configuration:
[ 21.876] (II) intel(0): Pipe A is on
[ 21.876] (II) intel(0): Display plane A is now enabled and connected to pipe A.
[ 21.876] (II) intel(0): Pipe B is off
[ 21.876] (II) intel(0): Display plane B is now disabled and connected to pipe B.
[ 21.876] (II) intel(0): Output VGA is connected to pipe A
[ 21.876] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.887]
##############################################
*** In function I830ScreenInit, on line 2728, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 21.887] assert( if(!miCreateDefColormap(screen)) )
[ 21.887] ##############################################
[ 21.896]
##############################################
*** In function I830ScreenInit, on line 2732, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 21.896] assert( if(!xf86HandleColormaps(screen, ...)) )
[ 21.896] ##############################################
[ 21.896] (==) intel(0): DPMS enabled
[ 21.903] (II) intel(0): Set up textured video
[ 21.910] (II) intel(0): direct rendering: DRI2 Enabled
[ 21.910] (--) RandR disabled
[ 21.910] (II) Initializing built-in extension Generic Event Extension
[ 21.910] (II) Initializing built-in extension SHAPE
[ 21.910] (II) Initializing built-in extension MIT-SHM
[ 21.910] (II) Initializing built-in extension XInputExtension
[ 21.910] (II) Initializing built-in extension XTEST
[ 21.910] (II) Initializing built-in extension BIG-REQUESTS
[ 21.910] (II) Initializing built-in extension SYNC
[ 21.910] (II) Initializing built-in extension XKEYBOARD
[ 21.910] (II) Initializing built-in extension XC-MISC
[ 21.910] (II) Initializing built-in extension SECURITY
[ 21.910] (II) Initializing built-in extension XINERAMA
[ 21.910] (II) Initializing built-in extension XFIXES
[ 21.910] (II) Initializing built-in extension XFree86-Bigfont
[ 21.910] (II) Initializing built-in extension RENDER
[ 21.910] (II) Initializing built-in extension RANDR
[ 21.910] (II) Initializing built-in extension COMPOSITE
[ 21.910] (II) Initializing built-in extension DAMAGE
[ 21.927] (II) AIGLX: Screen 0 is not DRI capable
[ 22.040] (II) AIGLX: Loaded and initialized /usr/X11R7/lib/modules/dri/swrast_dri.so
[ 22.040] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 22.041] (II) intel(0): Setting screen physical size to 444 x 277
[ 22.847] (II) Using input driver 'mouse' for 'Mouse0'
[ 22.847] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 22.847] (**) Option "CorePointer"
[ 22.847] (**) Mouse0: always reports core events
[ 22.855] (**) Option "Protocol" "wsmouse"
[ 22.855] (**) Option "Device" "/dev/wsmouse"
[ 22.855] (**) Mouse0: Protocol: "wsmouse"
[ 22.855] (**) Mouse0: always reports core events
[ 22.885] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 22.885] (**) Option "ZAxisMapping" "4 5 6 7"
[ 22.885] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 22.885] (**) Mouse0: Buttons: 11
[ 22.885] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 22.885] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 22.885] (**) Mouse0: (accel) acceleration profile 0
[ 22.885] (**) Mouse0: (accel) acceleration factor: 2.000
[ 22.885] (**) Mouse0: (accel) acceleration threshold: 4
[ 22.885] (II) Using input driver 'kbd' for 'Keyboard0'
[ 22.885] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 22.885] (**) Option "CoreKeyboard"
[ 22.885] (**) Keyboard0: always reports core events
[ 22.886] (**) Keyboard0: always reports core events
[ 22.886] (**) Option "Protocol" "standard"
[ 22.886] (**) Option "XkbRules" "xorg"
[ 22.886] (**) Option "XkbModel" "pc105"
[ 22.886] (**) Option "XkbLayout" "us,ru"
[ 22.886] (**) Option "XkbVariant" ",winkeys"
[ 22.886] (**) Option "XkbOptions" "grp:alt_shift_toggle"
[ 22.886] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 24.003] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 24.003] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 24.052] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 24.052] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 24.052] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 24.052] (II) intel(0): Using hsync ranges from config file
[ 24.052] (II) intel(0): Using vrefresh ranges from config file
[ 24.052] (II) intel(0): Printing DDC gathered Modelines:
[ 24.052] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 24.052] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 24.052] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 24.052] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 24.052] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 24.052] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 24.052] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 24.052] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 24.052] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 24.052] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 24.052] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 24.052] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 24.069] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 24.069] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 24.118] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 24.118] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 24.118] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 24.118] (II) intel(0): Using hsync ranges from config file
[ 24.118] (II) intel(0): Using vrefresh ranges from config file
[ 24.118] (II) intel(0): Printing DDC gathered Modelines:
[ 24.118] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 24.118] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 24.118] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 24.118] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 24.118] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 24.118] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 24.118] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 24.118] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 24.118] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 24.118] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 24.118] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 24.118] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 58145.933] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.933] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.933] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.933] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.933] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.933] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.933] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.933] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.933] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.933] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.933] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.934] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.935] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.935] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.935] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.935] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.935] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.935] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.935] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.935] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.935] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.935] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 58145.937] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Input/output error.
The rest of dmesg:
sg_dmamap_load_raw: unable to allocate extent subregion: 35
sg_dmamap_load_raw: unable to allocate extent subregion: 35
sg_dmamap_load_raw: unable to allocate extent subregion: 35
...
(a lot of it)
...
sg_dmamap_load_raw: unable to allocate extent subregion: 35
sg_dmamap_load_raw: unable to allocate extent subregion: 35
sg_dmamap_load_raw: unable to allocate extent subregion: 35
inteldrm0: gpu hung!
Dmitry
After returning from Xscreensaver, windows become displayed with artifacts on redraw
Xorg.0.log
[ 773.774]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 773.775] X Protocol Version 11, Revision 0
[ 773.775] Build Operating System: NetBSD/amd64 -
[ 773.775] Current Operating System: NetBSD vault 5.99.56 NetBSD 5.99.56 (GENERIC) #0: Tue Oct 11 01:12:02 MSK 2011 dm@:/usr/obj/sys/arch/amd64/compile/GENERIC amd64
[ 773.775] Build Date: 01 August 2011 01:01:00AM
[ 773.775]
[ 773.775] Current version of pixman: 0.23.2
[ 773.775] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 773.775] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 773.775] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 14 22:01:27 2011
[ 773.782] (==) Using config file: "/etc/X11/xorg.conf"
[ 773.806] (==) ServerLayout "X.org Configured"
[ 773.806] (**) |-->Screen "Screen0" (0)
[ 773.806] (**) | |-->Monitor "Monitor0"
[ 773.807] (**) | |-->Device "Card0"
[ 773.807] (**) |-->Screen "Screen1" (1)
[ 773.807] (**) | |-->Monitor "Monitor1"
[ 773.807] (**) | |-->Device "Card1"
[ 773.808] (**) |-->Input Device "Mouse0"
[ 773.808] (**) |-->Input Device "Keyboard0"
[ 773.808] (==) Not automatically adding devices
[ 773.808] (==) Not automatically enabling devices
[ 773.843] (**) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/,
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 773.843] (**) ModulePath set to "/usr/X11R7/lib/modules"
[ 773.845] (II) Loader magic: 0x82fc60
[ 773.845] (II) Module ABI versions:
[ 773.845] X.Org ANSI C Emulation: 0.4
[ 773.845] X.Org Video Driver: 10.0
[ 773.845] X.Org XInput driver : 12.2
[ 773.845] X.Org Server Extension : 5.0
[ 773.851] (--) PCI:*(0:0:2:0) 8086:2e32:1462:7592 rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000cc00/8
[ 773.851] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 773.851] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 773.851] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 773.851] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 773.851] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 773.851] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 773.851] (II) LoadModule: "dbe"
[ 773.875] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 773.889] (II) Module dbe: vendor="X.Org Foundation"
[ 773.889] compiled for 1.10.3, module version = 1.0.0
[ 773.889] Module class: X.Org Server Extension
[ 773.889] ABI class: X.Org Server Extension, version 5.0
[ 773.889] (II) Loading extension DOUBLE-BUFFER
[ 773.889] (II) LoadModule: "dri"
[ 773.890] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 773.898] (II) Module dri: vendor="X.Org Foundation"
[ 773.904] compiled for 1.10.3, module version = 1.0.0
[ 773.904] ABI class: X.Org Server Extension, version 5.0
[ 773.909] (II) Loading extension XFree86-DRI
[ 773.909] (II) LoadModule: "dri2"
[ 773.910] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 773.918] (II) Module dri2: vendor="X.Org Foundation"
[ 773.918] compiled for 1.10.3, module version = 1.2.0
[ 773.918] ABI class: X.Org Server Extension, version 5.0
[ 773.918] (II) Loading extension DRI2
[ 773.918] (II) LoadModule: "extmod"
[ 773.919] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 773.927] (II) Module extmod: vendor="X.Org Foundation"
[ 773.927] compiled for 1.10.3, module version = 1.0.0
[ 773.927] Module class: X.Org Server Extension
[ 773.927] ABI class: X.Org Server Extension, version 5.0
[ 773.928] (II) Loading extension MIT-SCREEN-SAVER
[ 773.928] (II) Loading extension XFree86-VidModeExtension
[ 773.928] (II) Loading extension XFree86-DGA
[ 773.928] (II) Loading extension DPMS
[ 773.928] (II) Loading extension XVideo
[ 773.928] (II) Loading extension XVideo-MotionCompensation
[ 773.928] (II) Loading extension X-Resource
[ 773.928] (II) LoadModule: "glx"
[ 773.929] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 773.937] (II) Module glx: vendor="X.Org Foundation"
[ 773.937] compiled for 1.10.3, module version = 1.0.0
[ 773.937] ABI class: X.Org Server Extension, version 5.0
[ 773.941] (==) AIGLX enabled
[ 773.942] (II) Loading extension GLX
[ 773.942] (II) LoadModule: "record"
[ 773.943] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 773.946] (II) Module record: vendor="X.Org Foundation"
[ 773.946] compiled for 1.10.3, module version = 1.13.0
[ 773.946] Module class: X.Org Server Extension
[ 773.946] ABI class: X.Org Server Extension, version 5.0
[ 773.946] (II) Loading extension RECORD
[ 773.946] (II) LoadModule: "shadow"
[ 773.947] (II) Loading /usr/X11R7/lib/modules/extensions/libshadow.so
[ 773.951] (II) Module shadow: vendor="X.Org Foundation"
[ 773.951] compiled for 1.10.3, module version = 1.1.0
[ 773.951] ABI class: X.Org ANSI C Emulation, version 0.4
[ 773.951] (II) LoadModule: "intel"
[ 773.951] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 773.996] (II) Module intel: vendor="X.Org Foundation"
[ 773.996] compiled for 1.10.3, module version = 2.9.1
[ 773.996] Module class: X.Org Video Driver
[ 773.996] ABI class: X.Org Video Driver, version 10.0
[ 773.996] (II) LoadModule: "vesa"
[ 773.997] (II) Loading /usr/X11R7/lib/modules/drivers/vesa_drv.so
[ 774.008] (II) Module vesa: vendor="X.Org Foundation"
[ 774.008] compiled for 1.10.3, module version = 2.3.0
[ 774.008] Module class: X.Org Video Driver
[ 774.008] ABI class: X.Org Video Driver, version 10.0
[ 774.008] (II) LoadModule: "mouse"
[ 774.008] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 774.014] (II) Module mouse: vendor="X.Org Foundation"
[ 774.014] compiled for 1.10.3, module version = 1.7.1
[ 774.014] Module class: X.Org XInput Driver
[ 774.014] ABI class: X.Org XInput driver, version 12.2
[ 774.014] (II) LoadModule: "kbd"
[ 774.014] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 774.024] (II) Module kbd: vendor="X.Org Foundation"
[ 774.024] compiled for 1.10.3, module version = 1.6.0
[ 774.024] Module class: X.Org XInput Driver
[ 774.024] ABI class: X.Org XInput driver, version 12.2
[ 774.024] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 774.025] (II) VESA: driver for VESA chipsets: vesa
[ 774.025] (--) Using wscons driver on /dev/ttyE0 in pcvt compatibility mode (version 3.32)
[ 774.025] (--) using VT number 1
[ 774.025] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 774.026] (WW) Falling back to old probe method for vesa
[ 774.026] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 774.026] (II) Loading sub module "vgahw"
[ 774.026] (II) LoadModule: "vgahw"
[ 774.032] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 774.036] (II) Module vgahw: vendor="X.Org Foundation"
[ 774.036] compiled for 1.10.3, module version = 0.1.0
[ 774.036] ABI class: X.Org Video Driver, version 10.0
[ 774.036] (II) Loading sub module "ramdac"
[ 774.036] (II) LoadModule: "ramdac"
[ 774.036] (II) Module "ramdac" already built-in
[ 774.036] drmOpenDevice: node name is /dev/dri/card0
[ 774.036] drmOpenDevice: open result is 13, (OK)
[ 774.036] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 774.036] drmOpenDevice: node name is /dev/dri/card0
[ 774.036] drmOpenDevice: open result is 13, (OK)
[ 774.036] drmOpenByBusid: drmOpenMinor returns 13
[ 774.036] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 774.036] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 774.036] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 774.036] (==) intel(0): RGB weight 888
[ 774.036] (==) intel(0): Default visual is TrueColor
[ 774.036] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41
[ 774.037] (--) intel(0): Chipset: "G41"
[ 774.037] (--) intel(0): Linear framebuffer at 0xD0000000
[ 774.037] (--) intel(0): IO registers at addr 0xFE400000 size 4194304
[ 774.037] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 774.037] (II) intel(0): No SDVO device is found in VBT
[ 774.041] (II) intel(0): 2 display pipes available.
[ 774.041] (II) Loading sub module "ddc"
[ 774.041] (II) LoadModule: "ddc"
[ 774.041] (II) Module "ddc" already built-in
[ 774.041] (II) Loading sub module "i2c"
[ 774.041] (II) LoadModule: "i2c"
[ 774.041] (II) Module "i2c" already built-in
[ 774.060] (II) intel(0): Output VGA using monitor section Monitor0
[ 774.061] (WW) intel(0): remove MTRR a0000 - b0000
[ 774.136] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 774.136] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 774.185] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 774.185] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 774.185] (II) intel(0): EDID for output VGA
[ 774.185] (II) intel(0): Manufacturer: DEL Model: f010 Serial#: 827930700
[ 774.185] (II) intel(0): Year: 2010 Week: 49
[ 774.185] (II) intel(0): EDID Version: 1.3
[ 774.185] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 774.185] (II) intel(0): Sync: Separate
[ 774.185] (II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 774.185] (II) intel(0): Gamma: 2.20
[ 774.185] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 774.185] (II) intel(0): Default color space is primary color space
[ 774.185] (II) intel(0): First detailed timing is preferred mode
[ 774.185] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 774.185] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 774.185] (II) intel(0): Supported established timings:
[ 774.185] (II) intel(0): 720x400@70Hz
[ 774.185] (II) intel(0): 640x480@60Hz
[ 774.185] (II) intel(0): 640x480@75Hz
[ 774.185] (II) intel(0): 800x600@60Hz
[ 774.185] (II) intel(0): 800x600@75Hz
[ 774.185] (II) intel(0): 1024x768@60Hz
[ 774.185] (II) intel(0): 1024x768@75Hz
[ 774.185] (II) intel(0): 1280x1024@75Hz
[ 774.185] (II) intel(0): Manufacturer's mask: 0
[ 774.185] (II) intel(0): Supported standard timings:
[ 774.185] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 774.185] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 774.185] (II) intel(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 774.185] (II) intel(0): Supported detailed timing:
[ 774.185] (II) intel(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 774.185] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 774.185] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 774.185] (II) intel(0): Serial No: H735H0BU1Y8L
[ 774.185] (II) intel(0): Monitor name: DELL 2209WA
[ 774.185] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[ 774.185] (II) intel(0): EDID (in hex):
[ 774.185] (II) intel(0): 00ffffffffffff0010ac10f04c385931
[ 774.185] (II) intel(0): 31140103682f1e782eee95a3544c9926
[ 774.185] (II) intel(0): 0f5054a54b00714f8180b30001010101
[ 774.185] (II) intel(0): 01010101010121399030621a274068b0
[ 774.185] (II) intel(0): 3600da281100001c000000ff00483733
[ 774.185] (II) intel(0): 35483042553159384c0a000000fc0044
[ 774.185] (II) intel(0): 454c4c203232303957410a20000000fd
[ 774.185] (II) intel(0): 00384b1e5310000a20202020202000d4
[ 774.185] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 774.186] (II) intel(0): Using EDID range info for horizontal sync
[ 774.186] (II) intel(0): Using EDID range info for vertical refresh
[ 774.186] (II) intel(0): Printing DDC gathered Modelines:
[ 774.186] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 774.186] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 774.186] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 774.186] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 774.186] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 774.186] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 774.186] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 774.186] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 774.186] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 774.186] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 774.186] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 774.186] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 774.186] (II) intel(0): Printing probed modes for output VGA
[ 774.186] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 774.186] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 774.186] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 774.186] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 774.186] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 774.186] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 774.186] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 774.186] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 774.186] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 774.186] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 774.186] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 774.186] (II) intel(0): Output VGA connected
[ 774.186] (II) intel(0): Using exact sizes for initial modes
[ 774.186] (II) intel(0): Output VGA using initial mode 1680x1050
[ 774.186] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 774.186]
##############################################
*** In function RestoreHWState, on line 1902, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 774.186] RestoreHWState
[ 774.186] ##############################################
[ 774.704] (WW) intel(0): remove MTRR a0000 - b0000
[ 774.737] (II) intel(0): detected 512 kB GTT.
[ 774.737] (II) intel(0): detected 32764 kB stolen memory.
[ 774.737] (==) intel(0): video overlay key set to 0x101fe
[ 774.737] (**) intel(0): Display dimensions: (470, 300) mm
[ 774.737] (**) intel(0): DPI set to (90, 88)
[ 774.737] (II) Loading sub module "fb"
[ 774.737] (II) LoadModule: "fb"
[ 774.738] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 774.747] (II) Module fb: vendor="X.Org Foundation"
[ 774.747] compiled for 1.10.3, module version = 1.0.0
[ 774.747] ABI class: X.Org ANSI C Emulation, version 0.4
[ 774.748] (II) UnloadModule: "vesa"
[ 774.748] (II) Unloading vesa
[ 774.752] (==) Depth 24 pixmap format is 32 bpp
[ 774.752] (II) intel(0): Kernel reported 1006592 total, 0 used
[ 774.752] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available
[ 774.761] (II) intel(0): [DRI2] Setup complete
[ 774.761] (II) intel(0): [DRI2] DRI driver: i965
[ 774.761] (**) intel(0): Framebuffer compression disabled
[ 774.761] (**) intel(0): Tiling enabled
[ 774.761] (**) intel(0): SwapBuffers wait enabled
[ 774.819] (==) intel(0): VideoRam: 262144 KB
[ 774.819] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 774.819] (II) intel(0): Tiled allocation successful.
[ 774.831] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 774.831]
##############################################
*** In function I830ScreenInit, on line 2643, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 774.831] assert( if(!vgaHWMapMem(scrn)) )
[ 774.831] ##############################################
[ 774.831] (WW) intel(0): remove MTRR a0000 - b0000
[ 774.832]
##############################################
*** In function I830ScreenInit, on line 2648, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 774.832] assert( if(!I830EnterVT(scrnIndex, 0)) )
[ 774.832] ##############################################
[ 774.832]
##############################################
*** In function I830ScreenInit, on line 2659, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 774.832] assert( if(!fbScreenInit(screen, ...) )
[ 774.832] ##############################################
[ 774.859] (II) UXA(0): Driver registered support for the following operations:
[ 774.859] (II) solid
[ 774.859] (II) copy
[ 774.859] (II) composite (RENDER acceleration)
[ 774.859] (II) put_image
[ 774.859] (II) get_image
[ 774.859] (==) intel(0): Backing store disabled
[ 774.859] (==) intel(0): Silken mouse enabled
[ 774.860] (II) intel(0): Initializing HW Cursor
[ 774.861]
##############################################
*** In function I830EnterVT, on line 2888, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 774.861] Enter VT
[ 774.861] ##############################################
[ 774.861] (WW) intel(0): drmSetMaster failed: 2.6.29 or newer kernel required for multi-server DRI
[ 775.171] (II) intel(0): Fixed memory allocation layout:
[ 775.171] (II) intel(0): 0x01fff000: end of stolen memory
[ 775.171] (II) intel(0): 0x01fff000-0x0fffffff: DRI memory manager (229380 kB)
[ 775.171] (II) intel(0): 0x10000000: end of aperture
[ 775.171] (II) intel(0): BO memory allocation layout:
[ 775.171] (II) intel(0): 0x01fff000: start of memory manager
[ 775.171] (II) intel(0): 0x02020000-0x0274dfff: front buffer (7352 kB) X tiled
[ 775.171] (II) intel(0): 0x02820000-0x02829fff: HW cursors (40 kB)
[ 775.171] (II) intel(0): 0x10000000: end of memory manager
[ 775.352]
##############################################
*** In function I830InitHWCursor, on line 82, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_cursor.c ***
[ 775.352] I830InitHWCursor
[ 775.352] ##############################################
[ 775.714] (II) intel(0): Output configuration:
[ 775.714] (II) intel(0): Pipe A is on
[ 775.714] (II) intel(0): Display plane A is now enabled and connected to pipe A.
[ 775.714] (II) intel(0): Pipe B is off
[ 775.714] (II) intel(0): Display plane B is now disabled and connected to pipe B.
[ 775.714] (II) intel(0): Output VGA is connected to pipe A
[ 775.714] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 775.723]
##############################################
*** In function I830ScreenInit, on line 2728, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 775.723] assert( if(!miCreateDefColormap(screen)) )
[ 775.723] ##############################################
[ 775.733]
##############################################
*** In function I830ScreenInit, on line 2732, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 775.733] assert( if(!xf86HandleColormaps(screen, ...)) )
[ 775.733] ##############################################
[ 775.733] (==) intel(0): DPMS enabled
[ 775.744] (II) intel(0): Set up textured video
[ 775.755] (II) intel(0): direct rendering: DRI2 Enabled
[ 775.767] (--) RandR disabled
[ 775.767] (II) Initializing built-in extension Generic Event Extension
[ 775.767] (II) Initializing built-in extension SHAPE
[ 775.767] (II) Initializing built-in extension MIT-SHM
[ 775.767] (II) Initializing built-in extension XInputExtension
[ 775.767] (II) Initializing built-in extension XTEST
[ 775.767] (II) Initializing built-in extension BIG-REQUESTS
[ 775.767] (II) Initializing built-in extension SYNC
[ 775.767] (II) Initializing built-in extension XKEYBOARD
[ 775.767] (II) Initializing built-in extension XC-MISC
[ 775.767] (II) Initializing built-in extension SECURITY
[ 775.767] (II) Initializing built-in extension XINERAMA
[ 775.767] (II) Initializing built-in extension XFIXES
[ 775.767] (II) Initializing built-in extension XFree86-Bigfont
[ 775.768] (II) Initializing built-in extension RENDER
[ 775.768] (II) Initializing built-in extension RANDR
[ 775.768] (II) Initializing built-in extension COMPOSITE
[ 775.768] (II) Initializing built-in extension DAMAGE
[ 775.789] (II) AIGLX: Screen 0 is not DRI capable
[ 775.886] (II) AIGLX: Loaded and initialized /usr/X11R7/lib/modules/dri/swrast_dri.so
[ 775.886] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 775.886] (II) intel(0): Setting screen physical size to 444 x 277
[ 776.609] (II) Using input driver 'mouse' for 'Mouse0'
[ 776.609] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 776.609] (**) Option "CorePointer"
[ 776.609] (**) Mouse0: always reports core events
[ 776.616] (**) Option "Protocol" "wsmouse"
[ 776.616] (**) Option "Device" "/dev/wsmouse"
[ 776.617] (**) Mouse0: Protocol: "wsmouse"
[ 776.617] (**) Mouse0: always reports core events
[ 776.617] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 776.617] (**) Option "ZAxisMapping" "4 5 6 7"
[ 776.617] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 776.617] (**) Mouse0: Buttons: 11
[ 776.617] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 776.617] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 776.617] (**) Mouse0: (accel) acceleration profile 0
[ 776.617] (**) Mouse0: (accel) acceleration factor: 2.000
[ 776.617] (**) Mouse0: (accel) acceleration threshold: 4
[ 776.617] (II) Using input driver 'kbd' for 'Keyboard0'
[ 776.617] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 776.617] (**) Option "CoreKeyboard"
[ 776.617] (**) Keyboard0: always reports core events
[ 776.617] (**) Keyboard0: always reports core events
[ 776.617] (**) Option "Protocol" "standard"
[ 776.617] (**) Option "XkbRules" "xorg"
[ 776.617] (**) Option "XkbModel" "pc105"
[ 776.617] (**) Option "XkbLayout" "us,ru"
[ 776.617] (**) Option "XkbVariant" ",winkeys"
[ 776.617] (**) Option "XkbOptions" "grp:alt_shift_toggle"
[ 776.617] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 777.124] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 777.124] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 777.173] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 777.173] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 777.173] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 777.173] (II) intel(0): Using hsync ranges from config file
[ 777.173] (II) intel(0): Using vrefresh ranges from config file
[ 777.173] (II) intel(0): Printing DDC gathered Modelines:
[ 777.173] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 777.173] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 777.173] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 777.173] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 777.173] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 777.173] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 777.173] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 777.173] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 777.173] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 777.173] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 777.173] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 777.173] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 777.190] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 777.190] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 777.239] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 777.239] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 777.239] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 777.239] (II) intel(0): Using hsync ranges from config file
[ 777.239] (II) intel(0): Using vrefresh ranges from config file
[ 777.239] (II) intel(0): Printing DDC gathered Modelines:
[ 777.239] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 777.239] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 777.239] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 777.239] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 777.239] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 777.239] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 777.239] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 777.239] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 777.239] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 777.239] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 777.239] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 777.239] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 11325.364] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Cannot allocate memory.
dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.56 (GENERIC) #0: Tue Oct 11 01:12:02 MSK 2011
dm@:/usr/obj/sys/arch/amd64/compile/GENERIC
total memory = 8157 MB
avail memory = 7906 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
MSI MS-7592 (5.0)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz, id 0x1067a
cpu1 at mainbus0 apid 1: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz, id 0x1067a
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <7592MS,A7592400,20101101>, AslId <MSFT,00000097>
ACPI Warning: Incorrect checksum in table [OEMB] - 0x43, should be 0x3C (20110623/tbutils-282)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
LPTE (PNP0400) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
FWH (INT0800) at acpi0 not configured
FWHE (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
SIOR (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2e30 (rev. 0x03)
agp0 at pchb0: detected 32764k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2e32 (rev. 0x03)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
inteldrm has not been converted to device_t
inteldrm0 at vga0: ioapic0 pin 16
drmdev has not been converted to device_t
drmdev0 at inteldrm0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: VIA VT1708S
hdafg0: DAC00 8ch: Speaker [Jack], HP Out [Jack]
hdafg0: ADC01 2ch: CD [Built-In], Line In [Jack], Mic In [Jack]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: 8ch/2ch 48000Hz PCM16*
audio0 at hdafg0: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x01)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
alc0 at pci2 dev 0 function 0: Atheros AR8131 PCIe Gigabit Ethernet
alc0: interrupting at ioapic0 pin 17
alc0: Ethernet address 6c:62:6d:c2:29:fd
atphy0 at alc0 phy 0: L1 10/100/1000 PHY, rev. 11
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x01)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
rtk0 at pci4 dev 0 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 16
rtk0: Ethernet address 00:e0:52:ca:e6:63
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 10 us, pow 89000 mW, 2803 MHz
acpicpu0: P1: FFH, lat 10 us, pow 77000 mW, 2403 MHz
acpicpu0: P2: FFH, lat 10 us, pow 66000 mW, 2003 MHz
acpicpu0: P3: FFH, lat 10 us, pow 55000 mW, 1603 MHz
acpicpu0: P4: FFH, lat 10 us, pow 46000 mW, 1203 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus0 drive 0
wd0: <ST3250820A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484518 cyl, 16 head, 63 sec, 512 bytes/sect x 488395055 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 1: <PIONEER DVD-RW DVR-219L, KFQC221355WL, 1.02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus2 drive 0
wd1: <ST500DM002-1BC142>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
cd0(piixide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
error: [drm:pid11620:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
An error in dmesg
Actually, the system is fully operational, but I've observed the following message in dmesg:
sg_iomap_create: unable to allocate page map with 2052 entries
error: [drm:pid590:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap: 12
The system is
~ $ uname -a
NetBSD vault 6.99.19 NetBSD 6.99.19 (GENERIC) #2: Sun May 26 12:10:00 MSK 2013 dm@:/usr/obj/sys/arch/amd64/compile/GENERIC amd64
~ $ uptime
10:33PM up 1 day, 5:11, 7 users, load averages: 0.71, 0.88, 0.83
Gpu hang in multi-head
The VGA output of the laptop is connected to a 1680x1050 monitor. Multihead is set up after running startx with:
xrandr --output VGA --auto --output LVDS --auto --below VGA
Then using two Firefox windows and few xterms rapidly freezes the X server (sort of).
startx log
/usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error /usr/xsrc/external/mit/libdrm/dist/intel/intel_bufmgr_gem.c:953: Error setting to CPU domain 111: Input/output error (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Input/output error.
/var/log/messages
/netbsd: inteldrm0: gpu hung!
/var/log/Xorg.0.log
[ 45.196]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 45.196] X Protocol Version 11, Revision 0
[ 45.196] Build Operating System: NetBSD/i386 -
[ 45.196] Current Operating System: NetBSD niagara 5.99.44 NetBSD 5.99.44 (GENERIC) #6: Fri Jan 28 15:37:52 CET 2011 sutre@niagara:/usr/src/sys/arch/i386/compile/GENERIC i386
[ 45.198] Build Date: 23 November 2010 01:33:05AM
[ 45.198]
[ 45.198] Current version of pixman: 0.21.2
[ 45.198] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 45.198] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45.198] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 28 16:44:24 2011
[ 45.206] (II) Loader magic: 0x82277dc
[ 45.206] (II) Module ABI versions:
[ 45.206] X.Org ANSI C Emulation: 0.4
[ 45.206] X.Org Video Driver: 8.0
[ 45.206] X.Org XInput driver : 11.0
[ 45.206] X.Org Server Extension : 4.0
[ 45.213] (--) PCI:*(0:0:2:0) 8086:2592:10cf:12e2 rev 4, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001400/8
[ 45.213] (--) PCI: (0:0:2:1) 8086:2792:10cf:12e2 rev 4, Mem @ 0x00000000/524288
[ 45.226] (==) Using default built-in configuration (30 lines)
[ 45.226] (==) --- Start of built-in configuration ---
[ 45.226] Section "Device"
[ 45.226] Identifier "Builtin Default intel Device 0"
[ 45.226] Driver "intel"
[ 45.226] EndSection
[ 45.226] Section "Screen"
[ 45.226] Identifier "Builtin Default intel Screen 0"
[ 45.226] Device "Builtin Default intel Device 0"
[ 45.226] EndSection
[ 45.226] Section "Device"
[ 45.226] Identifier "Builtin Default vesa Device 0"
[ 45.227] Driver "vesa"
[ 45.227] EndSection
[ 45.227] Section "Screen"
[ 45.227] Identifier "Builtin Default vesa Screen 0"
[ 45.227] Device "Builtin Default vesa Device 0"
[ 45.227] EndSection
[ 45.227] Section "Device"
[ 45.227] Identifier "Builtin Default fbdev Device 0"
[ 45.227] Driver "fbdev"
[ 45.227] EndSection
[ 45.227] Section "Screen"
[ 45.227] Identifier "Builtin Default fbdev Screen 0"
[ 45.227] Device "Builtin Default fbdev Device 0"
[ 45.227] EndSection
[ 45.227] Section "ServerLayout"
[ 45.227] Identifier "Builtin Default Layout"
[ 45.227] Screen "Builtin Default intel Screen 0"
[ 45.227] Screen "Builtin Default vesa Screen 0"
[ 45.227] Screen "Builtin Default fbdev Screen 0"
[ 45.227] EndSection
[ 45.227] (==) --- End of built-in configuration ---
[ 45.232] (==) ServerLayout "Builtin Default Layout"
[ 45.232] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 45.232] (**) | |-->Monitor ""
[ 45.236] (**) | |-->Device "Builtin Default intel Device 0"
[ 45.236] (==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
[ 45.236] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
[ 45.236] (**) | |-->Monitor ""
[ 45.237] (**) | |-->Device "Builtin Default vesa Device 0"
[ 45.237] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
[ 45.237] (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
[ 45.237] (**) | |-->Monitor ""
[ 45.238] (**) | |-->Device "Builtin Default fbdev Device 0"
[ 45.238] (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
[ 45.238] (==) Not automatically adding devices
[ 45.238] (==) Not automatically enabling devices
[ 45.445] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 45.445] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 45.445] (==) |-->Input Device ""
[ 45.445] (==) |-->Input Device ""
[ 45.445] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 45.445] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 45.445] (II) LoadModule: "extmod"
[ 45.486] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 45.508] (II) Module extmod: vendor="X.Org Foundation"
[ 45.515] compiled for 1.9.2, module version = 1.0.0
[ 45.515] Module class: X.Org Server Extension
[ 45.515] ABI class: X.Org Server Extension, version 4.0
[ 45.515] (II) Loading extension MIT-SCREEN-SAVER
[ 45.515] (II) Loading extension XFree86-VidModeExtension
[ 45.515] (II) Loading extension XFree86-DGA
[ 45.516] (II) Loading extension DPMS
[ 45.516] (II) Loading extension XVideo
[ 45.516] (II) Loading extension XVideo-MotionCompensation
[ 45.516] (II) Loading extension X-Resource
[ 45.516] (II) LoadModule: "dbe"
[ 45.520] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 45.638] (II) Module dbe: vendor="X.Org Foundation"
[ 45.638] compiled for 1.9.2, module version = 1.0.0
[ 45.638] Module class: X.Org Server Extension
[ 45.638] ABI class: X.Org Server Extension, version 4.0
[ 45.638] (II) Loading extension DOUBLE-BUFFER
[ 45.638] (II) LoadModule: "glx"
[ 45.642] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 45.690] (II) Module glx: vendor="X.Org Foundation"
[ 45.691] compiled for 1.9.2, module version = 1.0.0
[ 45.691] ABI class: X.Org Server Extension, version 4.0
[ 45.705] (==) AIGLX enabled
[ 45.705] (II) Loading extension GLX
[ 45.706] (II) LoadModule: "record"
[ 45.710] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 45.720] (II) Module record: vendor="X.Org Foundation"
[ 45.720] compiled for 1.9.2, module version = 1.13.0
[ 45.720] Module class: X.Org Server Extension
[ 45.720] ABI class: X.Org Server Extension, version 4.0
[ 45.720] (II) Loading extension RECORD
[ 45.720] (II) LoadModule: "dri"
[ 45.724] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 45.731] (II) Module dri: vendor="X.Org Foundation"
[ 45.732] compiled for 1.9.2, module version = 1.0.0
[ 45.732] ABI class: X.Org Server Extension, version 4.0
[ 45.741] (II) Loading extension XFree86-DRI
[ 45.741] (II) LoadModule: "dri2"
[ 45.745] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 45.763] (II) Module dri2: vendor="X.Org Foundation"
[ 45.764] compiled for 1.9.2, module version = 1.2.0
[ 45.764] ABI class: X.Org Server Extension, version 4.0
[ 45.764] (II) Loading extension DRI2
[ 45.764] (II) LoadModule: "intel"
[ 45.766] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 45.800] (II) Module intel: vendor="X.Org Foundation"
[ 45.800] compiled for 1.9.2, module version = 2.9.1
[ 45.800] Module class: X.Org Video Driver
[ 45.800] ABI class: X.Org Video Driver, version 8.0
[ 45.801] (II) LoadModule: "vesa"
[ 45.804] (II) Loading /usr/X11R7/lib/modules/drivers/vesa_drv.so
[ 45.816] (II) Module vesa: vendor="X.Org Foundation"
[ 45.816] compiled for 1.9.2, module version = 2.3.0
[ 45.816] Module class: X.Org Video Driver
[ 45.816] ABI class: X.Org Video Driver, version 8.0
[ 45.816] (II) LoadModule: "fbdev"
[ 45.839] (WW) Warning, couldn't open module fbdev
[ 45.839] (II) UnloadModule: "fbdev"
[ 45.839] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 45.839] (II) LoadModule: "mouse"
[ 45.841] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 45.851] (II) Module mouse: vendor="X.Org Foundation"
[ 45.851] compiled for 1.9.2, module version = 1.6.0
[ 45.851] Module class: X.Org XInput Driver
[ 45.851] ABI class: X.Org XInput driver, version 11.0
[ 45.851] (II) LoadModule: "kbd"
[ 45.853] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 45.879] (II) Module kbd: vendor="X.Org Foundation"
[ 45.879] compiled for 1.9.2, module version = 1.5.0
[ 45.879] Module class: X.Org XInput Driver
[ 45.879] ABI class: X.Org XInput driver, version 11.0
[ 45.880] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 45.881] (II) VESA: driver for VESA chipsets: vesa
[ 45.881] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 45.881] (--) using VT number 5
[ 45.885] (WW) Falling back to old probe method for vesa
[ 45.899] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 45.900] (II) Loading sub module "vgahw"
[ 45.900] (II) LoadModule: "vgahw"
[ 45.905] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 45.914] (II) Module vgahw: vendor="X.Org Foundation"
[ 45.914] compiled for 1.9.2, module version = 0.1.0
[ 45.914] ABI class: X.Org Video Driver, version 8.0
[ 45.914] (II) Loading sub module "ramdac"
[ 45.914] (II) LoadModule: "ramdac"
[ 45.914] (II) Module "ramdac" already built-in
[ 45.914] drmOpenDevice: node name is /dev/dri/card0
[ 45.915] drmOpenDevice: open result is 10, (OK)
[ 45.915] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 45.915] drmOpenDevice: node name is /dev/dri/card0
[ 45.915] drmOpenDevice: open result is 10, (OK)
[ 45.915] drmOpenByBusid: drmOpenMinor returns 10
[ 45.915] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 45.915] (II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
[ 45.915] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 45.915] (==) intel(0): RGB weight 888
[ 45.915] (==) intel(0): Default visual is TrueColor
[ 45.915] (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[ 45.915] (--) intel(0): Chipset: "915GM"
[ 45.916] (--) intel(0): Linear framebuffer at 0xC0000000
[ 45.916] (--) intel(0): IO registers at addr 0xB0080000 size 524288
[ 45.916] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 45.916] (II) intel(0): No SDVO device is found in VBT
[ 45.935] (II) intel(0): 2 display pipes available.
[ 45.935] (II) Loading sub module "ddc"
[ 45.935] (II) LoadModule: "ddc"
[ 45.935] (II) Module "ddc" already built-in
[ 45.935] (II) Loading sub module "i2c"
[ 45.935] (II) LoadModule: "i2c"
[ 45.935] (II) Module "i2c" already built-in
[ 45.945] (II) intel(0): Output VGA has no monitor section
[ 45.945] (II) intel(0): Output LVDS has no monitor section
[ 45.945] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[ 45.946] (II) intel(0): Attempting to determine panel fixed mode.
[ 45.946] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
[ 45.951] (II) intel(0): EDID for output LVDS
[ 45.953] (II) intel(0): Output TV has no monitor section
[ 45.953] (WW) intel(0): remove MTRR a0000 - b0000
[ 46.363] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 46.363] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 47.033] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 47.033] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 47.035] (II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
[ 47.097] (II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
[ 47.097] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 47.097] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 47.098] (II) intel(0): EDID for output VGA
[ 47.098] (II) intel(0): Manufacturer: VSC Model: e51d Serial#: 16843009
[ 47.098] (II) intel(0): Year: 2006 Week: 8
[ 47.098] (II) intel(0): EDID Version: 1.3
[ 47.098] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 47.098] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 47.098] (II) intel(0): Max Image Size [cm]: horiz.: 43 vert.: 27
[ 47.098] (II) intel(0): Gamma: 2.20
[ 47.098] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 47.098] (II) intel(0): Default color space is primary color space
[ 47.098] (II) intel(0): First detailed timing is preferred mode
[ 47.098] (II) intel(0): redX: 0.640 redY: 0.352 greenX: 0.288 greenY: 0.628
[ 47.098] (II) intel(0): blueX: 0.144 blueY: 0.076 whiteX: 0.313 whiteY: 0.329
[ 47.098] (II) intel(0): Supported established timings:
[ 47.098] (II) intel(0): 720x400@70Hz
[ 47.098] (II) intel(0): 640x480@60Hz
[ 47.098] (II) intel(0): 640x480@67Hz
[ 47.099] (II) intel(0): 640x480@72Hz
[ 47.099] (II) intel(0): 640x480@75Hz
[ 47.099] (II) intel(0): 800x600@56Hz
[ 47.099] (II) intel(0): 800x600@60Hz
[ 47.099] (II) intel(0): 800x600@72Hz
[ 47.099] (II) intel(0): 800x600@75Hz
[ 47.099] (II) intel(0): 832x624@75Hz
[ 47.099] (II) intel(0): 1024x768@60Hz
[ 47.099] (II) intel(0): 1024x768@70Hz
[ 47.099] (II) intel(0): 1024x768@75Hz
[ 47.099] (II) intel(0): 1280x1024@75Hz
[ 47.099] (II) intel(0): 1152x864@75Hz
[ 47.099] (II) intel(0): Manufacturer's mask: 0
[ 47.099] (II) intel(0): Supported standard timings:
[ 47.099] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 75 vid: 4019
[ 47.099] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 47.099] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 47.099] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 47.099] (II) intel(0): Supported detailed timing:
[ 47.099] (II) intel(0): clock: 146.2 MHz Image Size: 433 x 271 mm
[ 47.099] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 47.100] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 47.100] (II) intel(0): Serial No: Q6Y060806377
[ 47.100] (II) intel(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 215 MHz
[ 47.100] (II) intel(0): Monitor name: VX2025wm
[ 47.100] (II) intel(0): EDID (in hex):
[ 47.100] (II) intel(0): 00ffffffffffff005a631de501010101
[ 47.100] (II) intel(0): 081001030e2b1b782ecfe5a35a49a024
[ 47.100] (II) intel(0): 135054bfef80b30f81808140714f0101
[ 47.100] (II) intel(0): 01010101010121399030621a274068b0
[ 47.100] (II) intel(0): 3600b10f1100001c000000ff00513659
[ 47.100] (II) intel(0): 3036303830363337370a000000fd0032
[ 47.100] (II) intel(0): 4b1e5215000a202020202020000000fc
[ 47.100] (II) intel(0): 00565832303235776d0a20202020009e
[ 47.100] (II) intel(0): EDID vendor "VSC", prod id 58653
[ 47.137] (II) intel(0): Using EDID range info for horizontal sync
[ 47.137] (II) intel(0): Using EDID range info for vertical refresh
[ 47.137] (II) intel(0): Printing DDC gathered Modelines:
[ 47.138] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 47.138] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 47.138] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 47.138] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 47.138] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 47.138] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 47.138] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 47.138] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 47.138] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 47.138] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 47.138] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 47.138] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 47.138] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 47.138] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 47.139] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 47.139] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 47.139] (II) intel(0): Modeline "1680x1050"x0.0 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
[ 47.139] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 47.139] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 47.139] (II) intel(0): EDID vendor "VSC", prod id 58653
[ 47.139] (II) intel(0): Printing probed modes for output VGA
[ 47.139] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 47.139] (II) intel(0): Modeline "1680x1050"x74.9 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
[ 47.139] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 47.139] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 47.139] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 47.139] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 47.140] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 47.140] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 47.140] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 47.140] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 47.140] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 47.140] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 47.140] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 47.140] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 47.140] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 47.140] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 47.140] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 47.140] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 47.140] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 47.146] (II) intel(0): EDID for output LVDS
[ 47.147] (II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "1024x768i" (interlace mode not supported)
[ 47.147] (II) intel(0): Not using default mode "512x384i" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
[ 47.147] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 47.147] (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
[ 47.148] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 47.148] (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
[ 47.148] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 47.148] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[ 47.148] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 47.148] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[ 47.148] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 47.148] (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
[ 47.148] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 47.148] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 47.148] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 47.148] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 47.148] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 47.148] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 47.148] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 47.148] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 47.148] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 47.148] (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
[ 47.148] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 47.148] (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
[ 47.148] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 47.149] (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
[ 47.149] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 47.149] (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
[ 47.149] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 47.149] (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
[ 47.149] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 47.149] (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[ 47.149] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 47.149] (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[ 47.149] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 47.149] (II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
[ 47.149] (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[ 47.149] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 47.149] (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
[ 47.149] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 47.149] (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
[ 47.149] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 47.149] (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[ 47.149] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 47.149] (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[ 47.149] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 47.150] (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
[ 47.150] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 47.150] (II) intel(0): Printing probed modes for output LVDS
[ 47.150] (II) intel(0): Modeline "1280x768"x59.8 81.00 1280 1328 1440 1688 768 771 777 802 (48.0 kHz)
[ 47.150] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 47.150] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 47.150] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 47.150] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 47.150] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 47.150] (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 47.150] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 47.150] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 47.150] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 47.150] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 47.150] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 47.150] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 47.151] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 47.151] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 47.151] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
[ 47.151] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
[ 47.151] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
[ 47.783] (II) intel(0): EDID for output TV
[ 47.783] (II) intel(0): Output VGA connected
[ 47.783] (II) intel(0): Output LVDS connected
[ 47.783] (II) intel(0): Output TV disconnected
[ 47.784] (II) intel(0): Using fuzzy aspect match for initial modes
[ 47.784] (II) intel(0): Output VGA using initial mode 1024x768
[ 47.784] (II) intel(0): Output LVDS using initial mode 1024x768
[ 47.784] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 47.784]
##############################################
*** In function RestoreHWState, on line 1900, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 47.784] RestoreHWState
[ 47.784] ##############################################
[ 48.284] (WW) intel(0): remove MTRR a0000 - b0000
[ 48.323] (II) intel(0): detected 256 kB GTT.
[ 48.323] (II) intel(0): detected 7932 kB stolen memory.
[ 48.323] (==) intel(0): video overlay key set to 0x101fe
[ 48.323] (**) intel(0): Display dimensions: (430, 270) mm
[ 48.323] (**) intel(0): DPI set to (60, 72)
[ 48.323] (II) Loading sub module "fb"
[ 48.323] (II) LoadModule: "fb"
[ 48.328] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 48.371] (II) Module fb: vendor="X.Org Foundation"
[ 48.371] compiled for 1.9.2, module version = 1.0.0
[ 48.371] ABI class: X.Org ANSI C Emulation, version 0.4
[ 48.371] (II) UnloadModule: "vesa"
[ 48.371] (II) Unloading /usr/X11R7/lib/modules/drivers/vesa_drv.so
[ 48.385] (==) Depth 24 pixmap format is 32 bpp
[ 48.385] (II) intel(0): Kernel reported 491520 total, 0 used
[ 48.385] (II) intel(0): I830CheckAvailableMemory: 1966080 kB available
[ 48.385] (II) intel(0): [DRI2] Setup complete
[ 48.385] (II) intel(0): [DRI2] DRI driver: i915
[ 48.385] (**) intel(0): Framebuffer compression disabled
[ 48.385] (**) intel(0): Tiling enabled
[ 48.385] (**) intel(0): SwapBuffers wait enabled
[ 48.435] (==) intel(0): VideoRam: 262144 KB
[ 48.435] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 48.435] (II) intel(0): Tiled allocation successful.
[ 48.444] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 48.444]
##############################################
*** In function I830ScreenInit, on line 2641, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 48.444] assert( if(!vgaHWMapMem(scrn)) )
[ 48.444] ##############################################
[ 48.444] (WW) intel(0): remove MTRR a0000 - b0000
[ 48.445]
##############################################
*** In function I830ScreenInit, on line 2646, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 48.446] assert( if(!I830EnterVT(scrnIndex, 0)) )
[ 48.446] ##############################################
[ 48.446]
##############################################
*** In function I830ScreenInit, on line 2657, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 48.446] assert( if(!fbScreenInit(screen, ...) )
[ 48.446] ##############################################
[ 48.484] (II) UXA(0): Driver registered support for the following operations:
[ 48.484] (II) solid
[ 48.484] (II) copy
[ 48.484] (II) composite (RENDER acceleration)
[ 48.484] (II) put_image
[ 48.484] (II) get_image
[ 48.484] (==) intel(0): Backing store disabled
[ 48.484] (==) intel(0): Silken mouse enabled
[ 48.485] (II) intel(0): Initializing HW Cursor
[ 48.485]
##############################################
*** In function I830EnterVT, on line 2886, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 48.500] Enter VT
[ 48.501] ##############################################
[ 48.601] (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
[ 49.391] (II) intel(0): Fixed memory allocation layout:
[ 49.391] (II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000005f800000 physical
)
[ 49.391] (II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000005f80a000 physical
)
[ 49.391] (II) intel(0): 0x007bf000: end of stolen memory
[ 49.392] (II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
[ 49.392] (II) intel(0): 0x10000000: end of aperture
[ 49.392] (II) intel(0): BO memory allocation layout:
[ 49.392] (II) intel(0): 0x007bf000: start of memory manager
[ 49.392] (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
[ 49.392] (II) intel(0): 0x0fff5000: end of memory manager
[ 49.392]
##############################################
*** In function I830InitHWCursor, on line 82, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_cursor.c ***
[ 49.392] I830InitHWCursor
[ 49.392] ##############################################
[ 49.835] (II) intel(0): using SSC reference clock of 96 MHz
[ 49.855] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[ 50.015] (II) intel(0): Output configuration:
[ 50.015] (II) intel(0): Pipe A is on
[ 50.015] (II) intel(0): Display plane B is now enabled and connected to pipe A.
[ 50.015] (II) intel(0): Pipe B is on
[ 50.015] (II) intel(0): Display plane A is now enabled and connected to pipe B.
[ 50.015] (II) intel(0): Output VGA is connected to pipe A
[ 50.015] (II) intel(0): Output LVDS is connected to pipe B
[ 50.015] (II) intel(0): Output TV is connected to pipe none
[ 50.015] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 50.056]
##############################################
*** In function I830ScreenInit, on line 2726, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 50.056] assert( if(!miCreateDefColormap(screen)) )
[ 50.056] ##############################################
[ 50.080]
##############################################
*** In function I830ScreenInit, on line 2730, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 50.080] assert( if(!xf86HandleColormaps(screen, ...)) )
[ 50.080] ##############################################
[ 50.080] (==) intel(0): DPMS enabled
[ 50.080] (II) intel(0): Set up textured video
[ 50.080] (II) intel(0): Set up overlay video
[ 50.087] (II) intel(0): direct rendering: DRI2 Enabled
[ 50.098] (--) RandR disabled
[ 50.098] (II) Initializing built-in extension Generic Event Extension
[ 50.098] (II) Initializing built-in extension SHAPE
[ 50.098] (II) Initializing built-in extension MIT-SHM
[ 50.098] (II) Initializing built-in extension XInputExtension
[ 50.098] (II) Initializing built-in extension XTEST
[ 50.098] (II) Initializing built-in extension BIG-REQUESTS
[ 50.098] (II) Initializing built-in extension SYNC
[ 50.098] (II) Initializing built-in extension XKEYBOARD
[ 50.098] (II) Initializing built-in extension XC-MISC
[ 50.098] (II) Initializing built-in extension SECURITY
[ 50.098] (II) Initializing built-in extension XINERAMA
[ 50.098] (II) Initializing built-in extension XFIXES
[ 50.098] (II) Initializing built-in extension XFree86-Bigfont
[ 50.098] (II) Initializing built-in extension RENDER
[ 50.098] (II) Initializing built-in extension RANDR
[ 50.098] (II) Initializing built-in extension COMPOSITE
[ 50.098] (II) Initializing built-in extension DAMAGE
[ 50.148] (II) AIGLX: Screen 0 is not DRI capable
[ 50.308] (II) AIGLX: Loaded and initialized /usr/X11R7/lib/modules/dri/swrast_dri.so
[ 50.308] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 50.309] (II) intel(0): Setting screen physical size to 270 x 203
[ 51.280] (WW) : No Device specified, looking for one...
[ 51.317] (II) : found Device "/dev/wsmouse"
[ 51.355] (**) : Protocol: WSMouse
[ 51.355] (**) Option "CorePointer"
[ 51.356] (**) : always reports core events
[ 51.356] (**) Option "Device" "/dev/wsmouse"
[ 51.425] (==) : Emulate3Buttons, Emulate3Timeout: 50
[ 51.426] (**) : ZAxisMapping: buttons 4 and 5
[ 51.426] (**) : Buttons: 9
[ 51.426] (II) XINPUT: Adding extended input device "" (type: MOUSE)
[ 51.426] (**) : (accel) keeping acceleration scheme 1
[ 51.426] (**) : (accel) acceleration profile 0
[ 51.426] (**) : (accel) acceleration factor: 2.000
[ 51.426] (**) : (accel) acceleration threshold: 4
[ 51.463] (**) Option "CoreKeyboard"
[ 51.464] (**) : always reports core events
[ 51.464] (**) Option "Protocol" "standard"
[ 51.464] (**) : Protocol: standard
[ 51.464] (**) Option "XkbRules" "base"
[ 51.464] (**) : XkbRules: "base"
[ 51.464] (**) Option "XkbModel" "pc105"
[ 51.464] (**) : XkbModel: "pc105"
[ 51.464] (**) Option "XkbLayout" "us"
[ 51.464] (**) : XkbLayout: "us"
[ 51.464] (**) Option "CustomKeycodes" "off"
[ 51.464] (**) : CustomKeycodes disabled
[ 51.464] (II) XINPUT: Adding extended input device "" (type: KEYBOARD)
[ 59.229] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 59.230] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 59.230] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 59.230] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 59.233] (II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
[ 59.295] (II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
[ 59.295] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 59.295] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 59.295] (II) intel(0): EDID vendor "VSC", prod id 58653
[ 59.432] (II) intel(0): Allocate new frame buffer 1680x1818 stride 2048
[ 59.518] (II) intel(0): New front buffer at 0x1000000
[ 60.541] (II) intel(0): using SSC reference clock of 96 MHz
[ 60.561] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[ 118.626] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.637] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.638] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.638] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.639] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.639] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.640] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.640] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.640] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.641] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.641] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.642] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.642] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.643] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.643] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.643] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.644] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.644] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: Input/output error
[ 118.677] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Input/output error.
[ 153.415]
##############################################
*** In function I830LeaveVT, on line 2824, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 153.416] Leave VT
[ 153.416] ##############################################
[ 153.416]
##############################################
*** In function RestoreHWState, on line 1900, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 153.416] RestoreHWState
[ 153.416] ##############################################
[ 166.047] (II) UnloadModule: "kbd"
[ 166.047] (II) UnloadModule: "mouse"
[ 166.091]
##############################################
*** In function I830CloseScreen, on line 3013, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 166.091]
Unmapping memory
[ 166.091] ##############################################
dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.44 (GENERIC) #6: Fri Jan 28 15:37:52 CET 2011
sutre@niagara:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 1526 MB
avail memory = 1488 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
FUJITSU SIEMENS LIFEBOOK P7120 ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) M processor 1.20GHz, id 0x6d8
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20100528
acpi0: X/RSDT: OemId , AslId
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
CPU0 (ACPI Object Type 'Processor') at acpi0 not configured
MCFG (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: 1 15 29 43 57 71 85 100
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x0300): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0, bios detect
acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
acpivga0: 0x0300 (acpiout3): Unknown Output Device, head 0, bios detect
MBIO (PNP0C02) at acpi0 not configured
fujbp0 at acpi0 (FJEX, FUJ02B1): Fujitsu Brightness & Pointer
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
fujhk0 at acpi0 (FEXT, FUJ02E3): Fujitsu Hotkeys
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (CMB1, PNP0C0A-1): ACPI Battery
acpibat0: Fujitsu LION rechargeable battery
acpibat0: model number CP234019, serial number 1
acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah
acpibat1 at acpi0 (CMB2, PNP0C0A-2): ACPI Battery
acpibat1: Fujitsu LION rechargeable battery
acpibat1: model number CP194250 / CP194251, serial number 2
acpibat1: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah
acpitz0 at acpi0 (TZ00)
acpitz0: levels: critical 105.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Up/down buttons, Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2590 (rev. 0x04)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
inteldrm0 at vga1: ioapic0 pin 16
drmdev0 at inteldrm0
vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: Realtek ALC260
hdafg0: duplicate pin in association
hdafg0: ADC01 2ch: Line In [Built-In], AUX [Built-In], Mic In [Jack]
hdafg0: 0ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
hdvsmfg at hdaudio0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4)
pci1 at ppb0 bus 6
pci1: i/o space, memory space enabled
cbb0 at pci1 dev 3 function 0: vendor 0x1180 product 0x0476 (rev. 0xb3)
fwohci0 at pci1 dev 3 function 1: vendor 0x1180 product 0x0552 (rev. 0x08)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:0e:10:03:8b:4c:05
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci1 dev 3 function 2: vendor 0x1180 product 0x0822 (rev. 0x17)
sdhc0: interrupting at ioapic0 pin 16
sdmmc0 at sdhc0
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x08) at pci1 dev 3 function 3 not configured
vendor 0x1180 product 0x0852 (miscellaneous system, revision 0x03) at pci1 dev 3 function 4 not configured
rtk0 at pci1 dev 4 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20
rtk0: Ethernet address 00:17:42:02:39:db
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
iwi0 at pci1 dev 5 function 0: vendor 0x8086 product 0x4223 (rev. 0x05)
iwi0: interrupting at ioapic0 pin 18
iwi0: 802.11 address 00:16:6f:75:e7:5f
iwi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 7
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2641 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
gpiobus at ichlpcib0 not configured
piixide0 at pci0 dev 31 function 1: Intel 82801FB IDE Controller (ICH6) (rev. 0x04)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus0 drive 0:
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: LITEON Technology USB Multimedia Keyboard, rev 1.10/1.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
uhidev1 at uhub1 port 1 configuration 1 interface 0
uhidev1: Logitech USB RECEIVER, rev 1.10/25.10, addr 2, iclass 3/1
ums0 at uhidev1: 16 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 2 configuration 1 interface 1
uhidev2: LITEON Technology USB Multimedia Keyboard, rev 1.10/1.01, addr 2, iclass 3/0
uhidev2: 1 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ugen0 at uhub2 port 1
ugen0: AuthenTec Fingerprint Sensor, rev 1.10/6.21, addr 2
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
Compilation Error NetBSD 6.99.14 amd64
Hello,
First of all, thank you for your work. I want to share with you an error when I compile in current. Here are the logs:
# pwd
/home/ja/tmp/netbsd-drmgem/netbsd-drmgem.usr/src/sys/arch/amd64/conf
# config GENERIC
Build directory is ../compile/GENERIC
Don't forget to run "make depend"
# cd ../compile/GENERIC/
# make clean && make depend && make
[...]
# compile GENERIC/drm_drv.o
gcc -mcmodel=kernel -mno-red-zone -mno-sse -mno-sse2 -mno-sse3 -ffreestanding -fno-zero-initialized-in-bss -O2 -fno-omit-frame-pointer -fstack-protector -Wstack-protector --param ssp-buffer-size=1 -fno-strict-aliasing -fno-common -std=gnu99 -Werror -Wall -Wno-main -Wno-format-zero-length -Wpointer-arith -Wmissing-prototypes -Wstrict-prototypes -Wold-style-definition -Wswitch -Wshadow -Wcast-qual -Wwrite-strings -Wno-unreachable-code -Wno-pointer-sign -Wno-attributes -Wextra -Wno-unused-parameter -Wold-style-definition -Wno-sign-compare -Damd64 -Dx86_64 -I. -I../../../../../common/include -I../../../../arch -I../../../.. -nostdinc -DDIAGNOSTIC -DMAXUSERS=64 -D_KERNEL -D_KERNEL_OPT -std=gnu99 -I../../../../lib/libkern/../../../common/lib/libc/quad -I../../../../lib/libkern/../../../common/lib/libc/string -I../../../../lib/libkern/../../../common/lib/libc/arch/x86_64/string -I../../../../external/bsd/ipf -I../../../../external/isc/atheros_hal/dist -I../../../../external/isc/atheros_hal/ic -I../../../../../common/include -I../../../../external/bsd/acpica/dist/include -c ../../../../dev/pci/drm/drm_drv.c
../../../../dev/pci/drm/drm_drv.c:369:23: error: expected ')' before 'sizeof'
*** Error code 1
Stop.
make: stopped in /home/ja/tmp/netbsd-drmgem/netbsd-drmgem.usr/src/sys/arch/amd64/compile/GENERIC
# uname -a
NetBSD spof.j4.pe.intra 6.99.14 NetBSD 6.99.14 (J4) #0: Tue Oct 30 11:46:23 CET 2012 [email protected]:/usr/objdir/sys/arch/amd64/compile/J4 amd64
Build issues on NetBSD-current (amd64)
Hello,
I am trying to build netbsd-drmgem on my amd64 machine. NetBSD is updated to today's current.
During building
$ cd /usr/src/external/mit/xorg/lib/libdrm
$ su root -c "make includes"
$ make
$ su root -c "make install"
I have got some issues:
# compile libdrm/xf86drm.ln
lint -chapbxzFS -I/usr/X11R7/include/libdrm -DCSRG_BASED -DFUNCPROTO=15 -DNARROWPROTO -I/usr/X11R7/include -D__AMD64__ -i /usr/xsrc/external/mit/libdrm/dist/xf86drm.c
/usr/X11R7/include/libdrm/drm.h(178): warning: trailing ',' prohibited in enum declaration [54]
/usr/X11R7/include/libdrm/drm.h(428): warning: trailing ',' prohibited in enum declaration [54]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(149): warning: assignment in conditional context [159]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(193): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(320): warning: comparison of unsigned int with 0, op p >= p [162]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(337): warning: conversion to 'unsigned long' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(383): warning: conversion to 'unsigned long' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(420): warning: conversion to 'long' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(454): warning: assignment in conditional context [159]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(562): warning: assignment in conditional context [159]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(715): warning: conversion from 'unsigned long' to 'int' may lose accuracy [132]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(717): warning: conversion from 'unsigned long' to 'int' may lose accuracy [132]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(719): warning: conversion from 'unsigned long' to 'int' may lose accuracy [132]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(742): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(757): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(757): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(759): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(759): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(761): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(761): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(774): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(796): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(812): warning: pointer casts may be troublesome [247]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(794): warning: argument fd unused in function drmGetLibVersion [231]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(826): warning: cast discards 'const' from pointer target type [275]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(851): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(851): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(876): warning: cast discards 'const' from pointer target type [275]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(964): warning: enum type mismatch, op p = p [130]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(965): warning: enum type mismatch, op p = p [130]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1009): warning: enum type mismatch, op p = p [130]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1031): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1031): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1130): warning: conversion from 'unsigned long' to 'unsigned int' may lose accuracy [132]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1132): warning: conversion to 'long' due to prototype, arg #6 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1168): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1168): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1176): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1178): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1178): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1221): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1221): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1229): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1231): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1231): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1292): warning: enum type mismatch, op p = p [130]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1380): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1380): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1382): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(1382): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(2145): warning: conversion from 'unsigned long' to 'unsigned int' may lose accuracy [132]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(2146): warning: enum type mismatch, op p = p [130]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(2147): warning: enum type mismatch, op p = p [130]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(2162): warning: conversion from 'unsigned long' to 'int' may lose accuracy [132]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(2163): warning: conversion from 'unsigned long' to 'int' may lose accuracy [132]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(2471): warning: constant in conditional context [161]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(2502): DRM_IOCTL_SET_MASTER undefined [99]
/usr/xsrc/external/mit/libdrm/dist/xf86drm.c(2507): DRM_IOCTL_DROP_MASTER undefined [99]
# compile libdrm/xf86drm.o
*** Error code 1 (continuing)
gcc -O2 -I/usr/X11R7/include/libdrm -std=gnu99 -Werror -fno-strict-aliasing -I/usr/X11R7/include/libdrm -DCSRG_BASED -DFUNCPROTO=15 -DNARROWPROTO -I/usr/X11R7/include -D__AMD64__ -c /usr/xsrc/external/mit/libdrm/dist/xf86drm.c -o xf86drm.o
# compile libdrm/xf86drm.pico
*** Error code 1 (continuing)
gcc -O2 -I/usr/X11R7/include/libdrm -std=gnu99 -Werror -fno-strict-aliasing -I/usr/X11R7/include/libdrm -DCSRG_BASED -DFUNCPROTO=15 -DNARROWPROTO -I/usr/X11R7/include -D__AMD64__ -c -fPIC -DPIC /usr/xsrc/external/mit/libdrm/dist/xf86drm.c -o xf86drm.pico
# compile libdrm/xf86drm.po
*** Error code 1 (continuing)
gcc -O2 -I/usr/X11R7/include/libdrm -std=gnu99 -Werror -fno-strict-aliasing -I/usr/X11R7/include/libdrm -DCSRG_BASED -DFUNCPROTO=15 -DNARROWPROTO -I/usr/X11R7/include -D__AMD64__ -c -DGPROF -DPROF -pg /usr/xsrc/external/mit/libdrm/dist/xf86drm.c -o xf86drm.po
# compile libdrm/xf86drmMode.ln
*** Error code 1 (continuing)
lint -chapbxzFS -I/usr/X11R7/include/libdrm -DCSRG_BASED -DFUNCPROTO=15 -DNARROWPROTO -I/usr/X11R7/include -D__AMD64__ -i /usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c
/usr/X11R7/include/libdrm/drm.h(178): warning: trailing ',' prohibited in enum declaration [54]
/usr/X11R7/include/libdrm/drm.h(428): warning: trailing ',' prohibited in enum declaration [54]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(77): warning: cannot do pointer arithmetic on operand of unknown size [136]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(156): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(156): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(161): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(161): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(166): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(166): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(171): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(171): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(199): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(211): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(211): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(212): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(212): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(213): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(213): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(214): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(214): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(251): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(251): warning: conversion of 'unsigned long' to 'int' is out of range, arg #2 [295]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(251): warning: assignment in conditional context [159]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(260): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(260): warning: conversion of 'unsigned long' to 'int' is out of range, arg #2 [295]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(275): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(292): initialisation of an incomplete type [175]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(292): incomplete structure or union drm_mode_fb_dirty_cmd: dirty [31]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(294): illegal member use: fb_id [102]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(295): undefined struct/union member: clips_ptr [101]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(295): warning: conversion from 'unsigned long' to 'int' may lose accuracy [132]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(296): undefined struct/union member: num_clips [101]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(298): DRM_IOCTL_MODE_DIRTYFB undefined [99]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(320): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(353): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(353): warning: conversion of 'unsigned long' to 'int' is out of range, arg #2 [295]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(370): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(370): warning: conversion of 'unsigned long' to 'int' is out of range, arg #2 [295]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(382): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(382): warning: conversion of 'unsigned long' to 'int' is out of range, arg #2 [295]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(401): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(432): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(432): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(435): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(435): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(441): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(441): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(447): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(447): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(470): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(483): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(483): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(484): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(484): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(485): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(485): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(487): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(487): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(519): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(519): warning: conversion of 'unsigned long' to 'int' is out of range, arg #2 [295]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(529): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(529): warning: conversion of 'unsigned long' to 'int' is out of range, arg #2 [295]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(549): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(549): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(552): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(552): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(555): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(555): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(556): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(556): warning: conversion from 'unsigned long' to 'int' may lose accuracy, arg #1 [298]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(564): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(572): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(572): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(575): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(575): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(577): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(577): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(578): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(578): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(614): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(621): warning: conversion to 'int' due to prototype, arg #1 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(626): warning: conversion to 'int' due to prototype, arg #3 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(651): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(651): warning: conversion of 'unsigned long' to 'int' is out of range, arg #2 [295]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(660): warning: argument busid unused in function drmCheckModesettingSupported [231]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(728): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(728): warning: conversion of 'unsigned long' to 'int' is out of range, arg #2 [295]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(742): warning: conversion to 'int' due to prototype, arg #2 [259]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(742): warning: conversion of 'unsigned long' to 'int' is out of range, arg #2 [295]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(755): warning: conversion from 'long' to 'int' may lose accuracy [132]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(763): warning: possible pointer alignment problem [135]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(763): warning: pointer casts may be troublesome [247]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(769): warning: possible pointer alignment problem [135]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(769): warning: pointer casts may be troublesome [247]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(780): warning: possible pointer alignment problem [135]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(780): warning: pointer casts may be troublesome [247]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(799): incomplete structure or union drm_mode_crtc_page_flip: flip [31]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(801): illegal member use: fb_id [102]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(802): illegal member use: crtc_id [102]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(803): illegal member use: user_data [102]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(804): illegal member use: flags [102]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(805): illegal member use: reserved [102]
/usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c(807): DRM_IOCTL_MODE_PAGE_FLIP undefined [99]
# compile libdrm/xf86drmMode.o
*** Error code 1 (continuing)
gcc -O2 -I/usr/X11R7/include/libdrm -std=gnu99 -Werror -fno-strict-aliasing -I/usr/X11R7/include/libdrm -DCSRG_BASED -DFUNCPROTO=15 -DNARROWPROTO -I/usr/X11R7/include -D__AMD64__ -c /usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c -o xf86drmMode.o
# compile libdrm/xf86drmMode.pico
*** Error code 1 (continuing)
gcc -O2 -I/usr/X11R7/include/libdrm -std=gnu99 -Werror -fno-strict-aliasing -I/usr/X11R7/include/libdrm -DCSRG_BASED -DFUNCPROTO=15 -DNARROWPROTO -I/usr/X11R7/include -D__AMD64__ -c -fPIC -DPIC /usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c -o xf86drmMode.pico
# compile libdrm/xf86drmMode.po
*** Error code 1 (continuing)
gcc -O2 -I/usr/X11R7/include/libdrm -std=gnu99 -Werror -fno-strict-aliasing -I/usr/X11R7/include/libdrm -DCSRG_BASED -DFUNCPROTO=15 -DNARROWPROTO -I/usr/X11R7/include -D__AMD64__ -c -DGPROF -DPROF -pg /usr/xsrc/external/mit/libdrm/dist/xf86drmMode.c -o xf86drmMode.po
# build libdrm/libdrm.so.3.2
*** Error code 1 (continuing)
rm -f libdrm.so.3.2
gcc -Wl,-x -shared -Wl,-soname,libdrm.so.3 -Wl,--warn-shared-textrel -Wl,-rpath,/usr/X11R7/lib -L=/usr/X11R7/lib -o libdrm.so.3.2 -Wl,-rpath-link,/lib -L=/lib -Wl,--whole-archive libdrm_pic.a -Wl,--no-whole-archive
all ===> drm
*** Error code 1 (continuing)
`all' not remade because of errors.
I have resolved some issues related to include files (undefined identifiers), but it still failed to compile, as I think, due to many type conversion warnings.
Really, converting from int to long should be harmful on non-x86 systems. What should I do, how can I fix this stuff? Had you tried to build it on x86_64?
How does the graphics work on x86?
Regards,
Dmitry
GPU Hang on i386 / i915GM with Firefox
Opening several Firefox windows easily triggers the dreaded inteldrm0: gpu hung! error. The problem occurs on a Fujitsu Siemens Lifebook P7120 with the following setup:
- NetBSD/i386 (6.99.16), releng snapshot 201302101340Z.
- Pkgsrc package firefox-18.0.2 build from source.
- Installation of netbsd-drmgem with
autobuild.sh -mv 201302101340Z. - Graphics chipset: Intel 915GM.
The problem can be systematically triggered as follows:
- Start the X server with
startxand let twm initialize the session. - Launch
firefoxand open a second Firefox window (with Ctrl-N). - Load
file:///usr/bin/in the first window andfile:///usr/lib/in the second window. - Switch back and forth between the two windows (by left-clicking on the title bar) and move them around.
- The X server freezes for a bit, and the message
inteldrm0: gpu hung!appears in the kernel log.
As for issue #2, using DebugWait works around this problem.
Notes
- A netbsd-drmgem kernel with a vanilla X server does not exhibit the problem.
- This issue was already present in the first netbsd-drmgem release.
- The problem does not occur on another laptop with an Ironlake chipset (and NetBSD/amd64).
/var/log/messages
/netbsd: inteldrm0: gpu hung! /netbsd: _fault: failed to set to gtt (5) /netbsd: inteldrm_fault: failed to set to gtt (5) syslogd[356]: last message repeated 797 times /netbsd: error: [drm:pid171:i915_gem_cleanup_ringbuffer] *ERROR* failed to quiesce ring buffer whilst cleaning up: 16
/var/log/Xorg.0.log
[ 84.456] (EE) intel(0): Detected a hung GPU, disabling acceleration.
Compilation Error NetBSD amd64
Hello,
Thank you for your great work. I'm using automatic installation (autobuild.sh) but during compilation I get an error. Can you help me ?
# compile libm/s_fma.ln
lint -chapbxzFS -D_MULTI_LIBM -D_POSIX_MODE -DLIBM_SCCS
-I/home/tty/drmgem/netbsd-drmgem.usr/src/lib/libm/gen
-i /home/tty/drmgem/netbsd-drmgem.usr/src/lib/libm/src/s_fma.c
# compile libm/s_fma.o
gcc -O2 -std=gnu99 -Wall -Wstrict-prototypes -Wmissing-prototypes
-Wpointer-arith -Wno-sign-compare -Wno-traditional -Wa,--fatal-warnings
-Wreturn-type -Wswitch -Wshadow -Wcast-qual -Wwrite-strings -Wextra
-Wno-unused-parameter -Wno-sign-compare -Wsign-compare -Wformat=2
-Werror -fno-strict-aliasing -D_MULTI_LIBM -D_POSIX_MODE -DLIBM_SCCS
-I/home/tty/drmgem/netbsd-drmgem.usr/src/lib/libm/gen
-c /home/tty/drmgem/netbsd-drmgem.usr/src/lib/libm/src/s_fma.c -o s_fma.o
cc1: warnings being treated as errors
/home/tty/drmgem/netbsd-drmgem.usr/src/lib/libm/src/s_fma.c:189:1: error: no previous prototype for 'fma'
*** Error code 1
Stop.
make: stopped in /home/tty/drmgem/netbsd-drmgem.usr/src/lib/libm
$ uname -a
NetBSD TekBSD 6.99.14 NetBSD 6.99.14 (GENERIC) #0: Sat Oct 27 19:27:36 CEST 2012
instsoft@yosemite:/tmp/netbsd-drmgem.usr/src/sys/arch/amd64/compile/GENERIC amd64
Thank,
Unexpected X server crash
I have just switched from GVim to Firefox, and...
Xorg.0.log
[ 162.297]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 162.297] X Protocol Version 11, Revision 0
[ 162.297] Build Operating System: NetBSD/amd64 -
[ 162.297] Current Operating System: NetBSD vault 5.99.56 NetBSD 5.99.56 (GENERIC) #0: Tue Oct 11 01:12:02 MSK 2011 dm@:/usr/obj/sys/arch/amd64/compile/GENERIC amd64
[ 162.297] Build Date: 01 August 2011 01:01:00AM
[ 162.297]
[ 162.297] Current version of pixman: 0.23.2
[ 162.305] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 162.305] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 162.305] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 14 02:54:27 2011
[ 162.313] (==) Using config file: "/etc/X11/xorg.conf"
[ 162.323] (==) ServerLayout "X.org Configured"
[ 162.323] (**) |-->Screen "Screen0" (0)
[ 162.323] (**) | |-->Monitor "Monitor0"
[ 162.338] (**) | |-->Device "Card0"
[ 162.338] (**) |-->Screen "Screen1" (1)
[ 162.338] (**) | |-->Monitor "Monitor1"
[ 162.338] (**) | |-->Device "Card1"
[ 162.338] (**) |-->Input Device "Mouse0"
[ 162.338] (**) |-->Input Device "Keyboard0"
[ 162.339] (==) Not automatically adding devices
[ 162.339] (==) Not automatically enabling devices
[ 162.374] (**) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/,
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 162.374] (**) ModulePath set to "/usr/X11R7/lib/modules"
[ 162.374] (II) Loader magic: 0x82fc60
[ 162.374] (II) Module ABI versions:
[ 162.374] X.Org ANSI C Emulation: 0.4
[ 162.374] X.Org Video Driver: 10.0
[ 162.374] X.Org XInput driver : 12.2
[ 162.374] X.Org Server Extension : 5.0
[ 162.379] (--) PCI:*(0:0:2:0) 8086:2e32:1462:7592 rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000cc00/8
[ 162.379] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 162.379] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 162.379] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 162.379] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 162.379] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 162.379] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 162.379] (II) LoadModule: "dbe"
[ 162.405] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 162.420] (II) Module dbe: vendor="X.Org Foundation"
[ 162.420] compiled for 1.10.3, module version = 1.0.0
[ 162.420] Module class: X.Org Server Extension
[ 162.420] ABI class: X.Org Server Extension, version 5.0
[ 162.420] (II) Loading extension DOUBLE-BUFFER
[ 162.420] (II) LoadModule: "dri"
[ 162.421] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 162.428] (II) Module dri: vendor="X.Org Foundation"
[ 162.435] compiled for 1.10.3, module version = 1.0.0
[ 162.435] ABI class: X.Org Server Extension, version 5.0
[ 162.440] (II) Loading extension XFree86-DRI
[ 162.440] (II) LoadModule: "dri2"
[ 162.441] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 162.448] (II) Module dri2: vendor="X.Org Foundation"
[ 162.448] compiled for 1.10.3, module version = 1.2.0
[ 162.448] ABI class: X.Org Server Extension, version 5.0
[ 162.448] (II) Loading extension DRI2
[ 162.448] (II) LoadModule: "extmod"
[ 162.449] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 162.458] (II) Module extmod: vendor="X.Org Foundation"
[ 162.458] compiled for 1.10.3, module version = 1.0.0
[ 162.458] Module class: X.Org Server Extension
[ 162.458] ABI class: X.Org Server Extension, version 5.0
[ 162.458] (II) Loading extension MIT-SCREEN-SAVER
[ 162.458] (II) Loading extension XFree86-VidModeExtension
[ 162.458] (II) Loading extension XFree86-DGA
[ 162.459] (II) Loading extension DPMS
[ 162.459] (II) Loading extension XVideo
[ 162.459] (II) Loading extension XVideo-MotionCompensation
[ 162.459] (II) Loading extension X-Resource
[ 162.459] (II) LoadModule: "glx"
[ 162.460] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 162.468] (II) Module glx: vendor="X.Org Foundation"
[ 162.468] compiled for 1.10.3, module version = 1.0.0
[ 162.468] ABI class: X.Org Server Extension, version 5.0
[ 162.472] (==) AIGLX enabled
[ 162.472] (II) Loading extension GLX
[ 162.472] (II) LoadModule: "record"
[ 162.473] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 162.476] (II) Module record: vendor="X.Org Foundation"
[ 162.476] compiled for 1.10.3, module version = 1.13.0
[ 162.476] Module class: X.Org Server Extension
[ 162.476] ABI class: X.Org Server Extension, version 5.0
[ 162.476] (II) Loading extension RECORD
[ 162.476] (II) LoadModule: "shadow"
[ 162.477] (II) Loading /usr/X11R7/lib/modules/extensions/libshadow.so
[ 162.482] (II) Module shadow: vendor="X.Org Foundation"
[ 162.482] compiled for 1.10.3, module version = 1.1.0
[ 162.482] ABI class: X.Org ANSI C Emulation, version 0.4
[ 162.482] (II) LoadModule: "intel"
[ 162.482] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 162.527] (II) Module intel: vendor="X.Org Foundation"
[ 162.527] compiled for 1.10.3, module version = 2.9.1
[ 162.527] Module class: X.Org Video Driver
[ 162.527] ABI class: X.Org Video Driver, version 10.0
[ 162.527] (II) LoadModule: "vesa"
[ 162.528] (II) Loading /usr/X11R7/lib/modules/drivers/vesa_drv.so
[ 162.555] (II) Module vesa: vendor="X.Org Foundation"
[ 162.555] compiled for 1.10.3, module version = 2.3.0
[ 162.555] Module class: X.Org Video Driver
[ 162.555] ABI class: X.Org Video Driver, version 10.0
[ 162.555] (II) LoadModule: "mouse"
[ 162.556] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 162.561] (II) Module mouse: vendor="X.Org Foundation"
[ 162.561] compiled for 1.10.3, module version = 1.7.1
[ 162.561] Module class: X.Org XInput Driver
[ 162.561] ABI class: X.Org XInput driver, version 12.2
[ 162.561] (II) LoadModule: "kbd"
[ 162.562] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 162.572] (II) Module kbd: vendor="X.Org Foundation"
[ 162.572] compiled for 1.10.3, module version = 1.6.0
[ 162.572] Module class: X.Org XInput Driver
[ 162.572] ABI class: X.Org XInput driver, version 12.2
[ 162.572] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 162.572] (II) VESA: driver for VESA chipsets: vesa
[ 162.573] (--) Using wscons driver on /dev/ttyE0 in pcvt compatibility mode (version 3.32)
[ 162.573] (--) using VT number 1
[ 162.573] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 162.573] (WW) Falling back to old probe method for vesa
[ 162.573] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 162.574] (II) Loading sub module "vgahw"
[ 162.574] (II) LoadModule: "vgahw"
[ 162.579] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 162.583] (II) Module vgahw: vendor="X.Org Foundation"
[ 162.583] compiled for 1.10.3, module version = 0.1.0
[ 162.583] ABI class: X.Org Video Driver, version 10.0
[ 162.583] (II) Loading sub module "ramdac"
[ 162.583] (II) LoadModule: "ramdac"
[ 162.583] (II) Module "ramdac" already built-in
[ 162.583] drmOpenDevice: node name is /dev/dri/card0
[ 162.583] drmOpenDevice: open result is 13, (OK)
[ 162.583] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 162.583] drmOpenDevice: node name is /dev/dri/card0
[ 162.583] drmOpenDevice: open result is 13, (OK)
[ 162.583] drmOpenByBusid: drmOpenMinor returns 13
[ 162.584] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 162.584] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 162.584] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 162.584] (==) intel(0): RGB weight 888
[ 162.584] (==) intel(0): Default visual is TrueColor
[ 162.584] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41
[ 162.584] (--) intel(0): Chipset: "G41"
[ 162.584] (--) intel(0): Linear framebuffer at 0xD0000000
[ 162.584] (--) intel(0): IO registers at addr 0xFE400000 size 4194304
[ 162.584] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 162.584] (II) intel(0): No SDVO device is found in VBT
[ 162.589] (II) intel(0): 2 display pipes available.
[ 162.589] (II) Loading sub module "ddc"
[ 162.589] (II) LoadModule: "ddc"
[ 162.589] (II) Module "ddc" already built-in
[ 162.589] (II) Loading sub module "i2c"
[ 162.589] (II) LoadModule: "i2c"
[ 162.589] (II) Module "i2c" already built-in
[ 162.608] (II) intel(0): Output VGA using monitor section Monitor0
[ 162.608] (WW) intel(0): remove MTRR a0000 - b0000
[ 162.681] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 162.681] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 162.730] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 162.730] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 162.730] (II) intel(0): EDID for output VGA
[ 162.730] (II) intel(0): Manufacturer: DEL Model: f010 Serial#: 827930700
[ 162.730] (II) intel(0): Year: 2010 Week: 49
[ 162.730] (II) intel(0): EDID Version: 1.3
[ 162.730] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 162.730] (II) intel(0): Sync: Separate
[ 162.730] (II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 162.730] (II) intel(0): Gamma: 2.20
[ 162.730] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 162.730] (II) intel(0): Default color space is primary color space
[ 162.730] (II) intel(0): First detailed timing is preferred mode
[ 162.730] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 162.730] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 162.730] (II) intel(0): Supported established timings:
[ 162.730] (II) intel(0): 720x400@70Hz
[ 162.730] (II) intel(0): 640x480@60Hz
[ 162.730] (II) intel(0): 640x480@75Hz
[ 162.730] (II) intel(0): 800x600@60Hz
[ 162.730] (II) intel(0): 800x600@75Hz
[ 162.730] (II) intel(0): 1024x768@60Hz
[ 162.730] (II) intel(0): 1024x768@75Hz
[ 162.730] (II) intel(0): 1280x1024@75Hz
[ 162.730] (II) intel(0): Manufacturer's mask: 0
[ 162.730] (II) intel(0): Supported standard timings:
[ 162.730] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 162.730] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 162.730] (II) intel(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 162.730] (II) intel(0): Supported detailed timing:
[ 162.730] (II) intel(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 162.730] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 162.730] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 162.730] (II) intel(0): Serial No: H735H0BU1Y8L
[ 162.730] (II) intel(0): Monitor name: DELL 2209WA
[ 162.730] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[ 162.730] (II) intel(0): EDID (in hex):
[ 162.730] (II) intel(0): 00ffffffffffff0010ac10f04c385931
[ 162.730] (II) intel(0): 31140103682f1e782eee95a3544c9926
[ 162.730] (II) intel(0): 0f5054a54b00714f8180b30001010101
[ 162.730] (II) intel(0): 01010101010121399030621a274068b0
[ 162.730] (II) intel(0): 3600da281100001c000000ff00483733
[ 162.730] (II) intel(0): 35483042553159384c0a000000fc0044
[ 162.730] (II) intel(0): 454c4c203232303957410a20000000fd
[ 162.730] (II) intel(0): 00384b1e5310000a20202020202000d4
[ 162.730] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 162.731] (II) intel(0): Using EDID range info for horizontal sync
[ 162.731] (II) intel(0): Using EDID range info for vertical refresh
[ 162.731] (II) intel(0): Printing DDC gathered Modelines:
[ 162.731] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 162.731] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 162.731] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 162.731] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 162.731] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 162.731] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 162.731] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 162.731] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 162.731] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 162.731] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 162.731] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 162.731] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 162.731] (II) intel(0): Printing probed modes for output VGA
[ 162.731] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 162.731] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 162.731] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 162.731] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 162.731] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 162.731] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 162.731] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 162.731] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 162.731] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 162.731] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 162.731] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 162.731] (II) intel(0): Output VGA connected
[ 162.731] (II) intel(0): Using exact sizes for initial modes
[ 162.731] (II) intel(0): Output VGA using initial mode 1680x1050
[ 162.731] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 162.731]
##############################################
*** In function RestoreHWState, on line 1902, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 162.731] RestoreHWState
[ 162.731] ##############################################
[ 163.250] (WW) intel(0): remove MTRR a0000 - b0000
[ 163.283] (II) intel(0): detected 512 kB GTT.
[ 163.284] (II) intel(0): detected 32764 kB stolen memory.
[ 163.284] (==) intel(0): video overlay key set to 0x101fe
[ 163.284] (**) intel(0): Display dimensions: (470, 300) mm
[ 163.284] (**) intel(0): DPI set to (90, 88)
[ 163.284] (II) Loading sub module "fb"
[ 163.284] (II) LoadModule: "fb"
[ 163.285] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 163.295] (II) Module fb: vendor="X.Org Foundation"
[ 163.295] compiled for 1.10.3, module version = 1.0.0
[ 163.295] ABI class: X.Org ANSI C Emulation, version 0.4
[ 163.295] (II) UnloadModule: "vesa"
[ 163.295] (II) Unloading vesa
[ 163.299] (==) Depth 24 pixmap format is 32 bpp
[ 163.299] (II) intel(0): Kernel reported 1006592 total, 0 used
[ 163.299] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available
[ 163.308] (II) intel(0): [DRI2] Setup complete
[ 163.308] (II) intel(0): [DRI2] DRI driver: i965
[ 163.308] (**) intel(0): Framebuffer compression disabled
[ 163.308] (**) intel(0): Tiling enabled
[ 163.308] (**) intel(0): SwapBuffers wait enabled
[ 163.367] (==) intel(0): VideoRam: 262144 KB
[ 163.367] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 163.367] (II) intel(0): Tiled allocation successful.
[ 163.378] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 163.378]
##############################################
*** In function I830ScreenInit, on line 2643, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 163.378] assert( if(!vgaHWMapMem(scrn)) )
[ 163.378] ##############################################
[ 163.378] (WW) intel(0): remove MTRR a0000 - b0000
[ 163.379]
##############################################
*** In function I830ScreenInit, on line 2648, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 163.379] assert( if(!I830EnterVT(scrnIndex, 0)) )
[ 163.379] ##############################################
[ 163.379]
##############################################
*** In function I830ScreenInit, on line 2659, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 163.379] assert( if(!fbScreenInit(screen, ...) )
[ 163.379] ##############################################
[ 163.406] (II) UXA(0): Driver registered support for the following operations:
[ 163.406] (II) solid
[ 163.406] (II) copy
[ 163.406] (II) composite (RENDER acceleration)
[ 163.406] (II) put_image
[ 163.406] (II) get_image
[ 163.406] (==) intel(0): Backing store disabled
[ 163.406] (==) intel(0): Silken mouse enabled
[ 163.408] (II) intel(0): Initializing HW Cursor
[ 163.408]
##############################################
*** In function I830EnterVT, on line 2888, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 163.408] Enter VT
[ 163.408] ##############################################
[ 163.408] (WW) intel(0): drmSetMaster failed: 2.6.29 or newer kernel required for multi-server DRI
[ 163.717] (II) intel(0): Fixed memory allocation layout:
[ 163.717] (II) intel(0): 0x01fff000: end of stolen memory
[ 163.717] (II) intel(0): 0x01fff000-0x0fffffff: DRI memory manager (229380 kB)
[ 163.717] (II) intel(0): 0x10000000: end of aperture
[ 163.717] (II) intel(0): BO memory allocation layout:
[ 163.717] (II) intel(0): 0x01fff000: start of memory manager
[ 163.717] (II) intel(0): 0x02020000-0x0274dfff: front buffer (7352 kB) X tiled
[ 163.717] (II) intel(0): 0x02820000-0x02829fff: HW cursors (40 kB)
[ 163.717] (II) intel(0): 0x10000000: end of memory manager
[ 163.890]
##############################################
*** In function I830InitHWCursor, on line 82, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_cursor.c ***
[ 163.890] I830InitHWCursor
[ 163.890] ##############################################
[ 164.270] (II) intel(0): Output configuration:
[ 164.270] (II) intel(0): Pipe A is on
[ 164.270] (II) intel(0): Display plane A is now enabled and connected to pipe A.
[ 164.270] (II) intel(0): Pipe B is off
[ 164.270] (II) intel(0): Display plane B is now disabled and connected to pipe B.
[ 164.270] (II) intel(0): Output VGA is connected to pipe A
[ 164.270] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 164.271]
##############################################
*** In function I830ScreenInit, on line 2728, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 164.271] assert( if(!miCreateDefColormap(screen)) )
[ 164.271] ##############################################
[ 164.294]
##############################################
*** In function I830ScreenInit, on line 2732, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 164.294] assert( if(!xf86HandleColormaps(screen, ...)) )
[ 164.294] ##############################################
[ 164.294] (==) intel(0): DPMS enabled
[ 164.308] (II) intel(0): Set up textured video
[ 164.318] (II) intel(0): direct rendering: DRI2 Enabled
[ 164.331] (--) RandR disabled
[ 164.331] (II) Initializing built-in extension Generic Event Extension
[ 164.331] (II) Initializing built-in extension SHAPE
[ 164.331] (II) Initializing built-in extension MIT-SHM
[ 164.331] (II) Initializing built-in extension XInputExtension
[ 164.331] (II) Initializing built-in extension XTEST
[ 164.331] (II) Initializing built-in extension BIG-REQUESTS
[ 164.331] (II) Initializing built-in extension SYNC
[ 164.331] (II) Initializing built-in extension XKEYBOARD
[ 164.331] (II) Initializing built-in extension XC-MISC
[ 164.331] (II) Initializing built-in extension SECURITY
[ 164.331] (II) Initializing built-in extension XINERAMA
[ 164.331] (II) Initializing built-in extension XFIXES
[ 164.331] (II) Initializing built-in extension XFree86-Bigfont
[ 164.331] (II) Initializing built-in extension RENDER
[ 164.331] (II) Initializing built-in extension RANDR
[ 164.331] (II) Initializing built-in extension COMPOSITE
[ 164.331] (II) Initializing built-in extension DAMAGE
[ 164.353] (II) AIGLX: Screen 0 is not DRI capable
[ 164.458] (II) AIGLX: Loaded and initialized /usr/X11R7/lib/modules/dri/swrast_dri.so
[ 164.458] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 164.459] (II) intel(0): Setting screen physical size to 444 x 277
[ 165.231] (II) Using input driver 'mouse' for 'Mouse0'
[ 165.231] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 165.231] (**) Option "CorePointer"
[ 165.231] (**) Mouse0: always reports core events
[ 165.238] (**) Option "Protocol" "wsmouse"
[ 165.238] (**) Option "Device" "/dev/wsmouse"
[ 165.238] (**) Mouse0: Protocol: "wsmouse"
[ 165.238] (**) Mouse0: always reports core events
[ 165.238] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 165.238] (**) Option "ZAxisMapping" "4 5 6 7"
[ 165.238] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 165.238] (**) Mouse0: Buttons: 11
[ 165.239] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 165.239] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 165.239] (**) Mouse0: (accel) acceleration profile 0
[ 165.239] (**) Mouse0: (accel) acceleration factor: 2.000
[ 165.239] (**) Mouse0: (accel) acceleration threshold: 4
[ 165.239] (II) Using input driver 'kbd' for 'Keyboard0'
[ 165.239] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 165.239] (**) Option "CoreKeyboard"
[ 165.239] (**) Keyboard0: always reports core events
[ 165.239] (**) Keyboard0: always reports core events
[ 165.239] (**) Option "Protocol" "standard"
[ 165.239] (**) Option "XkbRules" "xorg"
[ 165.239] (**) Option "XkbModel" "pc105"
[ 165.239] (**) Option "XkbLayout" "us,ru"
[ 165.239] (**) Option "XkbVariant" ",winkeys"
[ 165.239] (**) Option "XkbOptions" "grp:alt_shift_toggle"
[ 165.239] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 993.713] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 993.713] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 993.762] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 993.762] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 993.762] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 993.762] (II) intel(0): Using hsync ranges from config file
[ 993.762] (II) intel(0): Using vrefresh ranges from config file
[ 993.762] (II) intel(0): Printing DDC gathered Modelines:
[ 993.762] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 993.762] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 993.762] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 993.762] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 993.762] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 993.762] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 993.762] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 993.763] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 993.763] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 993.763] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 993.763] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 993.763] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 993.780] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 993.780] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 993.829] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 993.829] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 993.829] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 993.829] (II) intel(0): Using hsync ranges from config file
[ 993.829] (II) intel(0): Using vrefresh ranges from config file
[ 993.829] (II) intel(0): Printing DDC gathered Modelines:
[ 993.829] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 993.829] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 993.829] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 993.829] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 993.829] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 993.829] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 993.829] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 993.829] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 993.829] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 993.829] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 993.829] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 993.829] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 12028.608] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Cannot allocate memory.
[ 12028.609] Segmentation fault at address 0x7f7ff5e80000
[ 12028.610]
Fatal server error:
[ 12028.610] Caught signal 11 (Segmentation fault). Server aborting
[ 12028.610]
[ 12028.610]
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
[ 12028.610] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 12028.610]
[ 12028.610] (II) UnloadModule: "mouse"
[ 12028.610] (II) Unloading mouse
[ 12028.611] (II) UnloadModule: "kbd"
[ 12028.611] (II) Unloading kbd
[ 12028.611]
##############################################
*** In function I830LeaveVT, on line 2826, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 12028.611] Leave VT
[ 12028.611] ##############################################
[ 12028.611]
##############################################
*** In function RestoreHWState, on line 1902, in file /usr/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 12028.611] RestoreHWState
[ 12028.611] ##############################################
[ 12029.216] (WW) intel(0): drmDropMaster failed: Invalid argument
messages
Oct 14 03:00:00 vault newsyslog[1579]: log file turned over
Oct 14 03:00:00 vault syslogd[152]: restart
Oct 14 06:12:13 vault /netbsd: error: [drm:pid539:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
Oct 14 06:12:13 vault /netbsd: error: [drm:pid539:i915_gem_object_bind_to_gtt] *ERROR* Failed to create dmamap
Oct 14 06:12:13 vault /netbsd: inteldrm_fault: failed to bind
Console on the wrong output in multi-head (Ironlake, eDP)
On a Dell Latitude E4310 with Core i5, Ironlake, and integrated panel on eDP, if an external monitor is connected by VGA when the X server starts, then the console is restored on the external monitor. This problem is related to issue #3 that is now considered fixed.
According to the logs of the X server, when the X session is closed, the console is sent to the output that was connected to pipe A. However, the allocation of pipes seems to be dependent on the order in which potential outputs are detected in I830SetupOutputs(). Currently, VGA is processed first, and then LVDS, eDP, HDMI and DP, in this order.
With the following patch, LVDS and eDP are processed first, and hence get connected to pipe A. However, if the display output is switched (using Fn-F8) before booting NetBSD, then the console is still sent to the integrated panel when the X server exits, which is a problem. Indeed, on this laptop, the integrated panel's backlight remains off in that Fn-F8 case (but the X server still sees the eDP output and connects it to pipe A).
--- a/xsrc/external/mit/xf86-video-intel/dist/src/intel_driver.c
+++ b/xsrc/external/mit/xf86-video-intel/dist/src/intel_driver.c
@@ -645,33 +645,33 @@ static Bool has_edp_a(ScrnInfoPtr scrn)
static void I830SetupOutputs(ScrnInfoPtr scrn)
{
xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR (scrn);
intel_screen_private *intel = intel_get_screen_private(scrn);
int o, c;
Bool lvds_detected = FALSE;
Bool dpd_is_edp = FALSE;
- /* everyone has at least a single analog output */
- i830_crt_init(scrn);
-
/* Set up integrated LVDS */
if (IS_MOBILE(intel) && !IS_I830(intel))
i830_lvds_init(scrn);
if (HAS_PCH_SPLIT(intel)) {
dpd_is_edp = i830_dpd_is_edp(scrn);
if (has_edp_a(scrn))
i830_dp_init(scrn, DP_A);
if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
i830_dp_init(scrn, PCH_DP_D);
}
+ /* everyone has at least a single analog output */
+ i830_crt_init(scrn);
+
if (HAS_PCH_SPLIT(intel)) {
int found;
Console not restored on Ironlake in multi-head
On a Core i5 laptop with multi-head (eDP + VGA), switching back to the console (e.g., when leaving the X server) gives a non-working console: the laptop panel is blank, and the console ``appears'' on the VGA-connected monitor, but the output is garbled (moving lines).
This problem disappears (i.e., the console is displayed correctly on the internal panel) when the following command is executed before terminating the X server:
xrandr --output VGA --off
VT switches lead to gpu hang + kernel panic
Performing vt switches from X back and forth and playing with the desktop (opening windows, moving them around) leads, after a short time, to a:
inteldrm0: gpu hung!
and the X server screen freezes, except for the mouse cursor that's still working. It's still possible to get back to a virtual console, though.
If the server process is killed, and X restarted, then we get a kernel panic with the following ddb(4) backtrace:
error: [drm:pid1068:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck
panic: kernel diagnostic assertion "TAILQ_EMPTY(&dev_priv->mm.request_list)" failed: file "[...]src/sys/dev/pci/drm/i915_drv.c", line 4483
fatal breakpoint trap in supervisor mode
trap type 1 code 0 rip ffffffff802521a5 cs 8 rflags 3246 cr2 ffff80006763e000 cpl 0 rsp ffff80006a732870
Stopped in pid 1068.1 (Xorg) at netbsd:breakpoint+0x5: leave
db{0}> bt
breakpoint() at netbsd:breakpoint+0x5
panic() at netbsd:panic+0x219
kern_assert() at netbsd:kern_assert+0x2d
i915_gem_entervt_ioctl() at netbsd:i915_gem_entervt_ioctl+0x128
inteldrm_ioctl() at netbsd:inteldrm_ioctl+0x7a
cdev_ioctl() at netbsd:cdev_ioctl+0x77
VOP_IOCTL() at netbsd:VOP_IOCTL+0x3b
vn_ioctl() at netbsd:vn_ioctl+0x6e
sys_ioctl() at netbsd:sys_ioctl+0x13c
syscall() at netbsd:syscall+0xac
db{0}>
If, instead of killing the X server, one switches back to the VT of the running X server, then a similar panic occurs.
This was tested by launching startx with exec xfce4-session in .xinitrc.
startx log
(EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Input/output error.
/var/log/Xorg.0.log
[ 89.001]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 89.001] X Protocol Version 11, Revision 0
[ 89.001] Build Operating System: NetBSD/amd64 -
[ 89.001] Current Operating System: NetBSD yosemite 5.99.55 NetBSD 5.99.55 (GENERIC) #1: Sat Sep 24 10:20:47 CEST 2011 sutre@tahoe:/data/sutre/build-amd64/home/sutre/NetBSD/src/sys/arch/amd64/compile/GENERIC amd64
[ 89.002] Build Date: 01 August 2011 01:01:00AM
[ 89.002]
[ 89.002] Current version of pixman: 0.23.2
[ 89.002] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 89.002] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 89.002] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 25 12:27:44 2011
[ 89.005] (II) Loader magic: 0x854da0
[ 89.005] (II) Module ABI versions:
[ 89.005] X.Org ANSI C Emulation: 0.4
[ 89.005] X.Org Video Driver: 10.0
[ 89.005] X.Org XInput driver : 12.2
[ 89.005] X.Org Server Extension : 5.0
[ 89.015] (--) PCI:*(0:0:2:0) 8086:0046:1028:0410 rev 2, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x000060b0/8
[ 89.016] (==) Using default built-in configuration (12 lines)
[ 89.016] (==) --- Start of built-in configuration ---
[ 89.016] Section "Device"
[ 89.016] Identifier "Builtin Default intel Device 0"
[ 89.016] Driver "intel"
[ 89.016] EndSection
[ 89.016] Section "Screen"
[ 89.016] Identifier "Builtin Default intel Screen 0"
[ 89.016] Device "Builtin Default intel Device 0"
[ 89.016] EndSection
[ 89.016] Section "ServerLayout"
[ 89.016] Identifier "Builtin Default Layout"
[ 89.016] Screen "Builtin Default intel Screen 0"
[ 89.016] EndSection
[ 89.016] (==) --- End of built-in configuration ---
[ 89.016] (==) ServerLayout "Builtin Default Layout"
[ 89.017] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 89.017] (**) | |-->Monitor ""
[ 89.018] (**) | |-->Device "Builtin Default intel Device 0"
[ 89.018] (==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
[ 89.018] (==) Not automatically adding devices
[ 89.018] (==) Not automatically enabling devices
[ 89.023] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 89.023] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 89.023] (==) |-->Input Device ""
[ 89.023] (==) |-->Input Device ""
[ 89.023] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 89.023] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 89.023] (II) LoadModule: "extmod"
[ 89.027] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 89.029] (II) Module extmod: vendor="X.Org Foundation"
[ 89.029] compiled for 1.10.3, module version = 1.0.0
[ 89.029] Module class: X.Org Server Extension
[ 89.029] ABI class: X.Org Server Extension, version 5.0
[ 89.029] (II) Loading extension MIT-SCREEN-SAVER
[ 89.029] (II) Loading extension XFree86-VidModeExtension
[ 89.029] (II) Loading extension XFree86-DGA
[ 89.030] (II) Loading extension DPMS
[ 89.030] (II) Loading extension XVideo
[ 89.030] (II) Loading extension XVideo-MotionCompensation
[ 89.030] (II) Loading extension X-Resource
[ 89.030] (II) LoadModule: "dbe"
[ 89.031] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 89.032] (II) Module dbe: vendor="X.Org Foundation"
[ 89.032] compiled for 1.10.3, module version = 1.0.0
[ 89.032] Module class: X.Org Server Extension
[ 89.032] ABI class: X.Org Server Extension, version 5.0
[ 89.032] (II) Loading extension DOUBLE-BUFFER
[ 89.032] (II) LoadModule: "glx"
[ 89.033] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 89.036] (II) Module glx: vendor="X.Org Foundation"
[ 89.037] compiled for 1.10.3, module version = 1.0.0
[ 89.037] ABI class: X.Org Server Extension, version 5.0
[ 89.038] (==) AIGLX enabled
[ 89.038] (II) Loading extension GLX
[ 89.038] (II) LoadModule: "record"
[ 89.039] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 89.040] (II) Module record: vendor="X.Org Foundation"
[ 89.040] compiled for 1.10.3, module version = 1.13.0
[ 89.040] Module class: X.Org Server Extension
[ 89.040] ABI class: X.Org Server Extension, version 5.0
[ 89.040] (II) Loading extension RECORD
[ 89.040] (II) LoadModule: "dri"
[ 89.041] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 89.042] (II) Module dri: vendor="X.Org Foundation"
[ 89.043] compiled for 1.10.3, module version = 1.0.0
[ 89.043] ABI class: X.Org Server Extension, version 5.0
[ 89.043] (II) Loading extension XFree86-DRI
[ 89.044] (II) LoadModule: "dri2"
[ 89.045] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 89.046] (II) Module dri2: vendor="X.Org Foundation"
[ 89.046] compiled for 1.10.3, module version = 1.2.0
[ 89.046] ABI class: X.Org Server Extension, version 5.0
[ 89.046] (II) Loading extension DRI2
[ 89.046] (II) LoadModule: "intel"
[ 89.046] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 89.051] (II) Module intel: vendor="X.Org Foundation"
[ 89.052] compiled for 1.10.3, module version = 2.9.1
[ 89.052] Module class: X.Org Video Driver
[ 89.052] ABI class: X.Org Video Driver, version 10.0
[ 89.053] (II) LoadModule: "mouse"
[ 89.053] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 89.054] (II) Module mouse: vendor="X.Org Foundation"
[ 89.055] compiled for 1.10.3, module version = 1.7.1
[ 89.055] Module class: X.Org XInput Driver
[ 89.055] ABI class: X.Org XInput driver, version 12.2
[ 89.055] (II) LoadModule: "kbd"
[ 89.055] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 89.056] (II) Module kbd: vendor="X.Org Foundation"
[ 89.056] compiled for 1.10.3, module version = 1.6.0
[ 89.056] Module class: X.Org XInput Driver
[ 89.056] ABI class: X.Org XInput driver, version 12.2
[ 89.056] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 89.057] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 89.057] (--) using VT number 5
[ 89.065] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 89.066] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 89.067] (II) Loading sub module "vgahw"
[ 89.067] (II) LoadModule: "vgahw"
[ 89.070] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 89.071] (II) Module vgahw: vendor="X.Org Foundation"
[ 89.071] compiled for 1.10.3, module version = 0.1.0
[ 89.071] ABI class: X.Org Video Driver, version 10.0
[ 89.071] (II) Loading sub module "ramdac"
[ 89.071] (II) LoadModule: "ramdac"
[ 89.071] (II) Module "ramdac" already built-in
[ 89.071] drmOpenDevice: node name is /dev/dri/card0
[ 89.071] drmOpenDevice: open result is 14, (OK)
[ 89.071] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 89.071] drmOpenDevice: node name is /dev/dri/card0
[ 89.071] drmOpenDevice: open result is 14, (OK)
[ 89.071] drmOpenByBusid: drmOpenMinor returns 14
[ 89.071] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 89.071] (II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
[ 89.071] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 89.071] (==) intel(0): RGB weight 888
[ 89.071] (==) intel(0): Default visual is TrueColor
[ 89.071] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 89.071] (--) intel(0): Chipset: "Arrandale"
[ 89.072] (--) intel(0): Linear framebuffer at 0xE0000000
[ 89.072] (--) intel(0): IO registers at addr 0xF0000000 size 4194304
[ 89.072] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 89.072] (II) intel(0): No SDVO device is found in VBT
[ 89.076] (II) intel(0): 2 display pipes available.
[ 89.076] (II) Loading sub module "ddc"
[ 89.076] (II) LoadModule: "ddc"
[ 89.076] (II) Module "ddc" already built-in
[ 89.076] (II) Loading sub module "i2c"
[ 89.076] (II) LoadModule: "i2c"
[ 89.076] (II) Module "i2c" already built-in
[ 89.077] (II) intel(0): Output VGA has no monitor section
[ 89.078] (II) intel(0): Output eDP has no monitor section
[ 89.078]
##############################################
*** In function i830_dp_i2c_init, on line 1869, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.078] i830_dp_i2c_init DPDDC-A
[ 89.078] ##############################################
[ 89.078] (II) intel(0): I2C bus "DPDDC-A" initialized.
[ 89.094]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 562, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.094] aux_i2c nack
[ 89.094] ##############################################
[ 89.114]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 562, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.114] aux_i2c nack
[ 89.114] ##############################################
[ 89.134] (II) intel(0): eDP output detected
[ 89.134] (II) intel(0): Output HDMI-3 has no monitor section
[ 89.134] (II) intel(0): I2C bus "HDMIB" initialized.
[ 89.134] (II) intel(0): HDMI-3 output detected
[ 89.134] (II) intel(0): Output DP-B has no monitor section
[ 89.134]
##############################################
*** In function i830_dp_i2c_init, on line 1869, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.134] i830_dp_i2c_init DPDDC-B
[ 89.134] ##############################################
[ 89.134] (II) intel(0): I2C bus "DPDDC-B" initialized.
[ 89.154]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.155] dp_aux_ch timeout status 0x5145003e
[ 89.155] ##############################################
[ 89.155]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 533, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.155] aux_ch failed -60
[ 89.155] ##############################################
[ 89.174]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.174] dp_aux_ch timeout status 0x5145003e
[ 89.174] ##############################################
[ 89.174]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 533, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.174] aux_ch failed -60
[ 89.174] ##############################################
[ 89.174] (II) intel(0): DP-B output detected
[ 89.174] (II) intel(0): Output HDMI-4 has no monitor section
[ 89.174] (II) intel(0): I2C bus "HDMIC" initialized.
[ 89.174] (II) intel(0): HDMI-4 output detected
[ 89.174] (II) intel(0): Output DP-C has no monitor section
[ 89.174]
##############################################
*** In function i830_dp_i2c_init, on line 1869, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.174] i830_dp_i2c_init DPDDC-C
[ 89.174] ##############################################
[ 89.174] (II) intel(0): I2C bus "DPDDC-C" initialized.
[ 89.194]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.194] dp_aux_ch timeout status 0x5145003e
[ 89.194] ##############################################
[ 89.194]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 533, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.194] aux_ch failed -60
[ 89.194] ##############################################
[ 89.214]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.214] dp_aux_ch timeout status 0x5145003e
[ 89.214] ##############################################
[ 89.214]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 533, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.214] aux_ch failed -60
[ 89.214] ##############################################
[ 89.214] (II) intel(0): DP-C output detected
[ 89.238] (II) intel(0): EDID for output VGA
[ 89.239] (II) intel(0): I2C device "DPDDC-A:ddc2" registered at address 0xA0.
[ 89.254]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 562, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 89.254] aux_i2c nack
[ 89.254] ##############################################
[ 91.896] (II) intel(0): EDID for output eDP
[ 91.896] (II) intel(0): Manufacturer: LGD Model: 24d Serial#: 0
[ 91.896] (II) intel(0): Year: 2010 Week: 0
[ 91.896] (II) intel(0): EDID Version: 1.4
[ 91.896] (II) intel(0): Digital Display Input
[ 91.896] (II) intel(0): 6 bits per channel
[ 91.896] (II) intel(0): Digital interface is DisplayPort
[ 91.896] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 17
[ 91.896] (II) intel(0): Gamma: 2.20
[ 91.896] (II) intel(0): No DPMS capabilities specified
[ 91.896] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 91.896] (II) intel(0): First detailed timing is preferred mode
[ 91.896] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 91.896] (II) intel(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
[ 91.896] (II) intel(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
[ 91.896] (II) intel(0): Manufacturer's mask: 0
[ 91.896] (II) intel(0): Supported detailed timing:
[ 91.896] (II) intel(0): clock: 75.5 MHz Image Size: 294 x 166 mm
[ 91.896] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1581 h_border: 0
[ 91.896] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 91.896] (II) intel(0): Supported detailed timing:
[ 91.896] (II) intel(0): clock: 50.3 MHz Image Size: 294 x 166 mm
[ 91.896] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1576 h_border: 0
[ 91.896] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 91.896] (II) intel(0): DR347133WH1
[ 91.896] (II) intel(0): Unknown vendor-specific block 0
[ 91.896] (II) intel(0): EDID (in hex):
[ 91.896] (II) intel(0): 00ffffffffffff0030e44d0200000000
[ 91.896] (II) intel(0): 00140104951d117802d5d59659568c27
[ 91.897] (II) intel(0): 1f505400000001010101010101010101
[ 91.897] (II) intel(0): 0101010101017e1d56d7500019303020
[ 91.897] (II) intel(0): 360026a61000001aa61356d250001930
[ 91.897] (II) intel(0): 3020360026a61000001a000000fe0044
[ 91.897] (II) intel(0): 52333437803133335748310a00000000
[ 91.897] (II) intel(0): 00004131160000000009010a20200006
[ 91.897] (II) intel(0): EDID vendor "LGD", prod id 589
[ 91.897] (II) intel(0): Printing probed modes for output eDP
[ 91.897] (II) intel(0): Modeline "1366x768"x60.2 75.50 1366 1414 1446 1581 768 771 777 793 +hsync -vsync (47.8 kHz)
[ 91.897] (II) intel(0): Modeline "1366x768"x40.2 50.30 1366 1414 1446 1576 768 771 777 793 +hsync -vsync (31.9 kHz)
[ 91.897] (II) intel(0): I2C device "HDMIB:ddc2" registered at address 0xA0.
[ 91.901] (II) intel(0): EDID for output HDMI-3
[ 91.901] (II) intel(0): EDID for output HDMI-3
[ 91.916]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 91.916] dp_aux_ch timeout status 0x5145003e
[ 91.916] ##############################################
[ 91.916]
##############################################
*** In function ironlake_dp_detect, on line 1513, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 91.916] DPCD: 0000
[ 91.916] ##############################################
[ 91.916] (II) intel(0): EDID for output DP-B
[ 91.916] (II) intel(0): I2C device "HDMIC:ddc2" registered at address 0xA0.
[ 91.920] (II) intel(0): EDID for output HDMI-4
[ 91.920] (II) intel(0): EDID for output HDMI-4
[ 91.936]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 91.936] dp_aux_ch timeout status 0x5145003e
[ 91.936] ##############################################
[ 91.936]
##############################################
*** In function ironlake_dp_detect, on line 1513, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 91.936] DPCD: 0000
[ 91.936] ##############################################
[ 91.936] (II) intel(0): EDID for output DP-C
[ 91.936] (II) intel(0): Output VGA disconnected
[ 91.936] (II) intel(0): Output eDP connected
[ 91.936] (II) intel(0): Output HDMI-3 disconnected
[ 91.936] (II) intel(0): Output DP-B disconnected
[ 91.936] (II) intel(0): Output HDMI-4 disconnected
[ 91.936] (II) intel(0): Output DP-C disconnected
[ 91.936] (II) intel(0): Using exact sizes for initial modes
[ 91.936] (II) intel(0): Output eDP using initial mode 1366x768
[ 91.936] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 91.936] (II) intel(0): detected 512 kB GTT.
[ 91.936] (II) intel(0): detected 32764 kB stolen memory.
[ 91.936] (==) intel(0): video overlay key set to 0x101fe
[ 91.936] (==) intel(0): DPI set to (96, 96)
[ 91.936] (II) Loading sub module "fb"
[ 91.936] (II) LoadModule: "fb"
[ 91.938] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 91.939] (II) Module fb: vendor="X.Org Foundation"
[ 91.940] compiled for 1.10.3, module version = 1.0.0
[ 91.940] ABI class: X.Org ANSI C Emulation, version 0.4
[ 91.940] (II) Loading sub module "int10"
[ 91.940] (II) LoadModule: "int10"
[ 91.941] (II) Loading /usr/X11R7/lib/modules/libint10.so
[ 91.943] (II) Module int10: vendor="X.Org Foundation"
[ 91.944] compiled for 1.10.3, module version = 1.0.0
[ 91.944] ABI class: X.Org Video Driver, version 10.0
[ 91.944] (WW) intel(0): remove MTRR a0000 - c0000
[ 91.945] (WW) intel(0): remove MTRR c0000 - 100000
[ 91.947] (II) intel(0): Primary V_BIOS segment is: 0xc000
[ 91.947] (WW) intel(0): remove MTRR 0 - 1000
[ 91.951] (--) intel(0): Console VGA mode is 0x3
[ 91.951] (==) Depth 24 pixmap format is 32 bpp
[ 91.952] (II) intel(0): Kernel reported 1006592 total, 0 used
[ 91.952] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available
[ 91.952] (II) intel(0): [DRI2] Setup complete
[ 91.952] (II) intel(0): [DRI2] DRI driver: i965
[ 91.952] (**) intel(0): Framebuffer compression disabled
[ 91.952] (**) intel(0): Tiling enabled
[ 91.952] (**) intel(0): SwapBuffers wait enabled
[ 92.066] (==) intel(0): VideoRam: 262144 KB
[ 92.066] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 92.067] (II) intel(0): Tiled allocation successful.
[ 92.067] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 92.067]
##############################################
*** In function I830ScreenInit, on line 2692, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 92.068] assert( if(!vgaHWMapMem(scrn)) )
[ 92.068] ##############################################
[ 92.068] (WW) intel(0): remove MTRR a0000 - b0000
[ 92.069]
##############################################
*** In function I830ScreenInit, on line 2697, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 92.069] assert( if(!I830EnterVT(scrnIndex, 0)) )
[ 92.069] ##############################################
[ 92.069]
##############################################
*** In function I830ScreenInit, on line 2708, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 92.069] assert( if(!fbScreenInit(screen, ...) )
[ 92.069] ##############################################
[ 92.074] (II) UXA(0): Driver registered support for the following operations:
[ 92.074] (II) solid
[ 92.074] (II) copy
[ 92.074] (II) composite (RENDER acceleration)
[ 92.074] (II) put_image
[ 92.074] (II) get_image
[ 92.074] (==) intel(0): Backing store disabled
[ 92.074] (==) intel(0): Silken mouse enabled
[ 92.075] (II) intel(0): Initializing HW Cursor
[ 92.075]
##############################################
*** In function I830EnterVT, on line 2937, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 92.075] Enter VT
[ 92.075] ##############################################
[ 92.075]
##############################################
*** In function ironlake_edp_backlight_off, on line 920, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 92.075]
[ 92.075] ##############################################
[ 92.075]
##############################################
*** In function i830_dp_link_down, on line 1420, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 92.075]
[ 92.075] ##############################################
[ 93.287] Plane disable
[ 93.327] Pipe disable
[ 93.347] PFIT disable
[ 93.347] FDI TX disable
[ 93.347] FDI RX disable
[ 93.367] FDI TX train 1 preload
[ 93.367] FDI RX train 1 preload
[ 93.387] LVDS port force off
[ 93.387] Transcoder disable
[ 93.407] PCH DPLL disable
[ 93.407] FDI RX PLL PCD disable
[ 93.407] FDI TX PLL disable 00024040
[ 93.427] FDI RX PLL disable 00044000
[ 93.447] DPMS off done
[ 93.467] Plane disable
[ 93.467] Pipe disable
[ 93.487] PFIT disable
[ 93.487] FDI TX disable
[ 93.487] FDI RX disable
[ 93.507] FDI TX train 1 preload
[ 93.507] FDI RX train 1 preload
[ 93.527] LVDS port force off
[ 93.527] Transcoder disable
[ 93.547] PCH DPLL disable
[ 93.547] FDI RX PLL PCD disable
[ 93.547] FDI TX PLL disable 00004040
[ 93.567] FDI RX PLL disable 00044000
[ 93.587] DPMS off done
[ 93.652] (II) intel(0): Fixed memory allocation layout:
[ 93.652] (II) intel(0): 0x01fff000: end of stolen memory
[ 93.652] (II) intel(0): 0x01fff000-0x0fffffff: DRI memory manager (229380 kB)
[ 93.652] (II) intel(0): 0x10000000: end of aperture
[ 93.652] (II) intel(0): BO memory allocation layout:
[ 93.652] (II) intel(0): 0x01fff000: start of memory manager
[ 93.652] (II) intel(0): 0x02020000-0x0243ffff: front buffer (4224 kB) X tiled
[ 93.652] (II) intel(0): 0x02520000-0x02529fff: HW cursors (40 kB)
[ 93.652] (II) intel(0): 0x10000000: end of memory manager
[ 93.806]
##############################################
*** In function I830InitHWCursor, on line 82, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_cursor.c ***
[ 93.806] I830InitHWCursor
[ 93.806] ##############################################
[ 93.895]
##############################################
*** In function ironlake_edp_backlight_off, on line 920, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 93.895]
[ 93.895] ##############################################
[ 94.217] Plane disable
[ 94.217] Pipe disable
[ 94.237] PFIT disable
[ 94.237] FDI TX disable
[ 94.237] FDI RX disable
[ 94.257] FDI TX train 1 preload
[ 94.257] FDI RX train 1 preload
[ 94.277] LVDS port force off
[ 94.277] Transcoder disable
[ 94.297] PCH DPLL disable
[ 94.297] FDI RX PLL PCD disable
[ 94.298] FDI TX PLL disable 00024040
[ 94.317] FDI RX PLL disable 00044000
[ 94.337] DPMS off done
[ 94.358] Plane disable
[ 94.358] Pipe disable
[ 94.378] PFIT disable
[ 94.378] FDI TX disable
[ 94.378] FDI RX disable
[ 94.398] FDI TX train 1 preload
[ 94.398] FDI RX train 1 preload
[ 94.418] LVDS port force off
[ 94.418] Transcoder disable
[ 94.438] PCH DPLL disable
[ 94.438] FDI RX PLL PCD disable
[ 94.438] FDI TX PLL disable 00004040
[ 94.458] FDI RX PLL disable 00044000
[ 94.478] DPMS off done
[ 94.499]
##############################################
*** In function i830_dp_mode_fixup, on line 635, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 94.499] Display port link bw 0a lane count 1 clock 270000
[ 94.499] ##############################################
[ 94.500]
##############################################
*** In function ironlake_edp_backlight_off, on line 920, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 94.500]
[ 94.500] ##############################################
[ 94.808]
##############################################
*** In function ironlake_edp_pll_on, on line 932, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 94.808]
[ 94.808] ##############################################
[ 94.828] Plane disable
[ 94.828] Pipe disable
[ 94.848] PFIT disable
[ 94.848] FDI TX disable
[ 94.848] FDI RX disable
[ 94.868] FDI TX train 1 preload
[ 94.868] FDI RX train 1 preload
[ 94.888] LVDS port force off
[ 94.888] Transcoder disable
[ 94.908] PCH DPLL disable
[ 94.908] FDI RX PLL PCD disable
[ 94.908] FDI TX PLL disable 00024040
[ 94.928] FDI RX PLL disable 00044000
[ 94.948] DPMS off done
[ 94.968] (WW) intel(0): Chosen PLL clock of 216.0 Mhz more than 2% away from desired 270.0 Mhz
[ 94.968] bpp 6
[ 95.028]
##############################################
*** In function ironlake_set_pll_edp, on line 1665, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_display.c ***
[ 95.028] eDP PLL enable for clock 270000
[ 95.028] ##############################################
[ 95.128] Pipe enable
[ 95.128] Plane enable
[ 95.128] LUT load
[ 95.128] DPMS on done
[ 95.368]
##############################################
*** In function ironlake_edp_backlight_on, on line 902, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 95.368]
[ 95.368] ##############################################
[ 95.678] Plane disable
[ 95.679] Pipe disable
[ 95.698] PFIT disable
[ 95.698] FDI TX disable
[ 95.698] FDI RX disable
[ 95.718] FDI TX train 1 preload
[ 95.718] FDI RX train 1 preload
[ 95.738] LVDS port force off
[ 95.738] Transcoder disable
[ 95.758] PCH DPLL disable
[ 95.758] FDI RX PLL PCD disable
[ 95.759] FDI TX PLL disable 00004040
[ 95.778] FDI RX PLL disable 00044000
[ 95.798] DPMS off done
[ 95.819] (II) intel(0): Output configuration:
[ 95.819] (II) intel(0): Pipe A is on
[ 95.819] (II) intel(0): Display plane A is now enabled and connected to pipe A.
[ 95.819] (II) intel(0): Pipe B is off
[ 95.819] (II) intel(0): Display plane B is now disabled and connected to pipe B.
[ 95.819] (II) intel(0): Output VGA is connected to pipe none
[ 95.819] (II) intel(0): Output eDP is connected to pipe A
[ 95.819] (II) intel(0): Output HDMI-3 is connected to pipe none
[ 95.819] (II) intel(0): Output DP-B is connected to pipe none
[ 95.819] (II) intel(0): Output HDMI-4 is connected to pipe none
[ 95.819] (II) intel(0): Output DP-C is connected to pipe none
[ 95.819] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 95.819]
##############################################
*** In function I830ScreenInit, on line 2777, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 95.820] assert( if(!miCreateDefColormap(screen)) )
[ 95.820] ##############################################
[ 95.820]
##############################################
*** In function I830ScreenInit, on line 2781, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 95.820] assert( if(!xf86HandleColormaps(screen, ...)) )
[ 95.820] ##############################################
[ 95.821] (==) intel(0): DPMS enabled
[ 95.821] (II) intel(0): Set up textured video
[ 95.822] (II) intel(0): direct rendering: DRI2 Enabled
[ 95.823] (--) RandR disabled
[ 95.823] (II) Initializing built-in extension Generic Event Extension
[ 95.823] (II) Initializing built-in extension SHAPE
[ 95.823] (II) Initializing built-in extension MIT-SHM
[ 95.823] (II) Initializing built-in extension XInputExtension
[ 95.823] (II) Initializing built-in extension XTEST
[ 95.823] (II) Initializing built-in extension BIG-REQUESTS
[ 95.823] (II) Initializing built-in extension SYNC
[ 95.823] (II) Initializing built-in extension XKEYBOARD
[ 95.823] (II) Initializing built-in extension XC-MISC
[ 95.823] (II) Initializing built-in extension SECURITY
[ 95.823] (II) Initializing built-in extension XINERAMA
[ 95.823] (II) Initializing built-in extension XFIXES
[ 95.823] (II) Initializing built-in extension XFree86-Bigfont
[ 95.823] (II) Initializing built-in extension RENDER
[ 95.823] (II) Initializing built-in extension RANDR
[ 95.823] (II) Initializing built-in extension COMPOSITE
[ 95.823] (II) Initializing built-in extension DAMAGE
[ 95.839] (II) AIGLX: Screen 0 is not DRI capable
[ 95.869] (II) AIGLX: Loaded and initialized /usr/X11R7/lib/modules/dri/swrast_dri.so
[ 95.869] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 95.870] (II) intel(0): Setting screen physical size to 361 x 203
[ 96.247] (II) Using input driver 'mouse' for ''
[ 96.247] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 96.247] (**) Option "CorePointer"
[ 96.247] (**) : always reports core events
[ 96.247] (WW) : No Device specified, looking for one...
[ 96.291] (II) : found Device "/dev/wsmouse"
[ 96.297] (--) : Device: "/dev/wsmouse"
[ 96.297] (==) : Protocol: "WSMouse"
[ 96.297] (**) : always reports core events
[ 96.297] (**) Option "Device" "/dev/wsmouse"
[ 96.310] (==) : Emulate3Buttons, Emulate3Timeout: 50
[ 96.310] (**) : ZAxisMapping: buttons 4 and 5
[ 96.310] (**) : Buttons: 9
[ 96.310] (II) XINPUT: Adding extended input device "" (type: MOUSE)
[ 96.310] (**) : (accel) keeping acceleration scheme 1
[ 96.310] (**) : (accel) acceleration profile 0
[ 96.310] (**) : (accel) acceleration factor: 2.000
[ 96.310] (**) : (accel) acceleration threshold: 4
[ 96.317] (II) Using input driver 'kbd' for ''
[ 96.317] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 96.317] (**) Option "CoreKeyboard"
[ 96.317] (**) : always reports core events
[ 96.317] (**) : always reports core events
[ 96.317] (**) Option "Protocol" "standard"
[ 96.317] (**) Option "XkbRules" "base"
[ 96.317] (**) Option "XkbModel" "pc105"
[ 96.317] (**) Option "XkbLayout" "us"
[ 96.317] (II) XINPUT: Adding extended input device "" (type: KEYBOARD)
[ 96.318] Pipe enable
[ 96.318] Plane enable
[ 96.318] LUT load
[ 96.318] DPMS on done
[ 96.318]
##############################################
*** In function ironlake_edp_backlight_on, on line 902, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 96.318]
[ 96.318] ##############################################
[ 97.740]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 562, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 97.740] aux_i2c nack
[ 97.740] ##############################################
[ 100.382] (II) intel(0): EDID vendor "LGD", prod id 589
[ 100.382] (II) intel(0): Printing DDC gathered Modelines:
[ 100.382] (II) intel(0): Modeline "1366x768"x0.0 75.50 1366 1414 1446 1581 768 771 777 793 +hsync -vsync (47.8 kHz)
[ 100.382] (II) intel(0): Modeline "1366x768"x0.0 50.30 1366 1414 1446 1576 768 771 777 793 +hsync -vsync (31.9 kHz)
[ 100.382] (II) intel(0): EDID vendor "LGD", prod id 589
[ 100.402]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 100.402] dp_aux_ch timeout status 0x5145003e
[ 100.402] ##############################################
[ 100.402]
##############################################
*** In function ironlake_dp_detect, on line 1513, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 100.402] DPCD: 0000
[ 100.402] ##############################################
[ 100.422]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 100.422] dp_aux_ch timeout status 0x5145003e
[ 100.422] ##############################################
[ 100.422]
##############################################
*** In function ironlake_dp_detect, on line 1513, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 100.422] DPCD: 0000
[ 100.422] ##############################################
[ 107.553]
##############################################
*** In function I830LeaveVT, on line 2875, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 107.553] Leave VT
[ 107.553] ##############################################
[ 109.339]
##############################################
*** In function I830EnterVT, on line 2937, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 109.339] Enter VT
[ 109.339] ##############################################
[ 109.339]
##############################################
*** In function ironlake_edp_backlight_off, on line 920, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 109.339]
[ 109.339] ##############################################
[ 109.339]
##############################################
*** In function i830_dp_link_down, on line 1420, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 109.339]
[ 109.339] ##############################################
[ 110.579] Plane disable
[ 110.619] Pipe disable
[ 110.639] PFIT disable
[ 110.639] FDI TX disable
[ 110.639] FDI RX disable
[ 110.659] FDI TX train 1 preload
[ 110.659] FDI RX train 1 preload
[ 110.679] LVDS port force off
[ 110.679] Transcoder disable
[ 110.699] PCH DPLL disable
[ 110.699] FDI RX PLL PCD disable
[ 110.699] FDI TX PLL disable 00024040
[ 110.719] FDI RX PLL disable 00044000
[ 110.739] DPMS off done
[ 110.759] Plane disable
[ 110.759] Pipe disable
[ 110.779] PFIT disable
[ 110.779] FDI TX disable
[ 110.779] FDI RX disable
[ 110.799] FDI TX train 1 preload
[ 110.799] FDI RX train 1 preload
[ 110.819] LVDS port force off
[ 110.819] Transcoder disable
[ 110.839] PCH DPLL disable
[ 110.839] FDI RX PLL PCD disable
[ 110.839] FDI TX PLL disable 00004040
[ 110.859] FDI RX PLL disable 00044000
[ 110.879] DPMS off done
[ 110.942] (II) intel(0): Fixed memory allocation layout:
[ 110.942] (II) intel(0): 0x01fff000: end of stolen memory
[ 110.942] (II) intel(0): 0x01fff000-0x0fffffff: DRI memory manager (229380 kB)
[ 110.942] (II) intel(0): 0x10000000: end of aperture
[ 110.942] (II) intel(0): BO memory allocation layout:
[ 110.942] (II) intel(0): 0x01fff000: start of memory manager
[ 110.942] (II) intel(0): 0x02020000-0x0243ffff: front buffer (4224 kB) X tiled
[ 110.942] (II) intel(0): 0x02520000-0x02529fff: HW cursors (40 kB)
[ 110.942] (II) intel(0): 0x10000000: end of memory manager
[ 111.095]
##############################################
*** In function I830InitHWCursor, on line 82, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_cursor.c ***
[ 111.095] I830InitHWCursor
[ 111.095] ##############################################
[ 111.180]
##############################################
*** In function ironlake_edp_backlight_off, on line 920, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 111.180]
[ 111.180] ##############################################
[ 111.509] Plane disable
[ 111.509] Pipe disable
[ 111.529] PFIT disable
[ 111.529] FDI TX disable
[ 111.529] FDI RX disable
[ 111.549] FDI TX train 1 preload
[ 111.549] FDI RX train 1 preload
[ 111.569] LVDS port force off
[ 111.569] Transcoder disable
[ 111.589] PCH DPLL disable
[ 111.589] FDI RX PLL PCD disable
[ 111.589] FDI TX PLL disable 00024040
[ 111.609] FDI RX PLL disable 00044000
[ 111.629] DPMS off done
[ 111.649] Plane disable
[ 111.649] Pipe disable
[ 111.669] PFIT disable
[ 111.669] FDI TX disable
[ 111.669] FDI RX disable
[ 111.689] FDI TX train 1 preload
[ 111.689] FDI RX train 1 preload
[ 111.709] LVDS port force off
[ 111.709] Transcoder disable
[ 111.729] PCH DPLL disable
[ 111.729] FDI RX PLL PCD disable
[ 111.729] FDI TX PLL disable 00004040
[ 111.749] FDI RX PLL disable 00044000
[ 111.769] DPMS off done
[ 111.790]
##############################################
*** In function i830_dp_mode_fixup, on line 635, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 111.790] Display port link bw 0a lane count 1 clock 270000
[ 111.790] ##############################################
[ 111.790]
##############################################
*** In function ironlake_edp_backlight_off, on line 920, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 111.790]
[ 111.791] ##############################################
[ 112.100]
##############################################
*** In function ironlake_edp_pll_on, on line 932, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 112.100]
[ 112.100] ##############################################
[ 112.120] Plane disable
[ 112.120] Pipe disable
[ 112.140] PFIT disable
[ 112.140] FDI TX disable
[ 112.140] FDI RX disable
[ 112.160] FDI TX train 1 preload
[ 112.160] FDI RX train 1 preload
[ 112.180] LVDS port force off
[ 112.180] Transcoder disable
[ 112.200] PCH DPLL disable
[ 112.200] FDI RX PLL PCD disable
[ 112.200] FDI TX PLL disable 00024040
[ 112.220] FDI RX PLL disable 00044000
[ 112.240] DPMS off done
[ 112.260] (WW) intel(0): Chosen PLL clock of 216.0 Mhz more than 2% away from desired 270.0 Mhz
[ 112.260] bpp 6
[ 112.320]
##############################################
*** In function ironlake_set_pll_edp, on line 1665, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_display.c ***
[ 112.320] eDP PLL enable for clock 270000
[ 112.320] ##############################################
[ 112.420] Pipe enable
[ 112.420] Plane enable
[ 112.420] LUT load
[ 112.420] DPMS on done
[ 112.660]
##############################################
*** In function ironlake_edp_backlight_on, on line 902, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 112.660]
[ 112.660] ##############################################
[ 112.970] Plane disable
[ 112.970] Pipe disable
[ 112.990] PFIT disable
[ 112.990] FDI TX disable
[ 112.990] FDI RX disable
[ 113.010] FDI TX train 1 preload
[ 113.010] FDI RX train 1 preload
[ 113.030] LVDS port force off
[ 113.030] Transcoder disable
[ 113.050] PCH DPLL disable
[ 113.050] FDI RX PLL PCD disable
[ 113.050] FDI TX PLL disable 00004040
[ 113.070] FDI RX PLL disable 00044000
[ 113.090] DPMS off done
[ 113.110] (II) intel(0): Output configuration:
[ 113.110] (II) intel(0): Pipe A is on
[ 113.110] (II) intel(0): Display plane A is now enabled and connected to pipe A.
[ 113.110] (II) intel(0): Pipe B is off
[ 113.110] (II) intel(0): Display plane B is now disabled and connected to pipe B.
[ 113.110] (II) intel(0): Output VGA is connected to pipe none
[ 113.110] (II) intel(0): Output eDP is connected to pipe A
[ 113.110] (II) intel(0): Output HDMI-3 is connected to pipe none
[ 113.110] (II) intel(0): Output DP-B is connected to pipe none
[ 113.111] (II) intel(0): Output HDMI-4 is connected to pipe none
[ 113.111] (II) intel(0): Output DP-C is connected to pipe none
[ 113.150]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 562, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 113.150] aux_i2c nack
[ 113.150] ##############################################
[ 115.792] (II) intel(0): EDID vendor "LGD", prod id 589
[ 115.792] (II) intel(0): Printing DDC gathered Modelines:
[ 115.792] (II) intel(0): Modeline "1366x768"x0.0 75.50 1366 1414 1446 1581 768 771 777 793 +hsync -vsync (47.8 kHz)
[ 115.792] (II) intel(0): Modeline "1366x768"x0.0 50.30 1366 1414 1446 1576 768 771 777 793 +hsync -vsync (31.9 kHz)
[ 115.792] (II) intel(0): EDID vendor "LGD", prod id 589
[ 115.812]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 115.812] dp_aux_ch timeout status 0x5145003e
[ 115.812] ##############################################
[ 115.812]
##############################################
*** In function ironlake_dp_detect, on line 1513, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 115.812] DPCD: 0000
[ 115.812] ##############################################
[ 115.832]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 115.832] dp_aux_ch timeout status 0x5145003e
[ 115.832] ##############################################
[ 115.832]
##############################################
*** In function ironlake_dp_detect, on line 1513, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 115.832] DPCD: 0000
[ 115.832] ##############################################
[ 115.835] Pipe enable
[ 115.835] Plane enable
[ 115.835] LUT load
[ 115.835] DPMS on done
[ 115.835]
##############################################
*** In function ironlake_edp_backlight_on, on line 902, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 115.835]
[ 115.835] ##############################################
[ 178.335]
##############################################
*** In function I830LeaveVT, on line 2875, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 178.335] Leave VT
[ 178.335] ##############################################
[ 180.027]
##############################################
*** In function I830EnterVT, on line 2937, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 180.027] Enter VT
[ 180.027] ##############################################
[ 180.027]
##############################################
*** In function ironlake_edp_backlight_off, on line 920, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 180.027]
[ 180.027] ##############################################
[ 180.027]
##############################################
*** In function i830_dp_link_down, on line 1420, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 180.027]
[ 180.027] ##############################################
[ 181.207] Plane disable
[ 181.247] Pipe disable
[ 181.267] PFIT disable
[ 181.267] FDI TX disable
[ 181.267] FDI RX disable
[ 181.287] FDI TX train 1 preload
[ 181.287] FDI RX train 1 preload
[ 181.307] LVDS port force off
[ 181.307] Transcoder disable
[ 181.327] PCH DPLL disable
[ 181.327] FDI RX PLL PCD disable
[ 181.327] FDI TX PLL disable 00024040
[ 181.347] FDI RX PLL disable 00044000
[ 181.367] DPMS off done
[ 181.387] Plane disable
[ 181.387] Pipe disable
[ 181.407] PFIT disable
[ 181.407] FDI TX disable
[ 181.407] FDI RX disable
[ 181.427] FDI TX train 1 preload
[ 181.427] FDI RX train 1 preload
[ 181.447] LVDS port force off
[ 181.447] Transcoder disable
[ 181.467] PCH DPLL disable
[ 181.467] FDI RX PLL PCD disable
[ 181.467] FDI TX PLL disable 00004040
[ 181.487] FDI RX PLL disable 00044000
[ 181.507] DPMS off done
[ 181.570] (II) intel(0): Fixed memory allocation layout:
[ 181.570] (II) intel(0): 0x01fff000: end of stolen memory
[ 181.570] (II) intel(0): 0x01fff000-0x0fffffff: DRI memory manager (229380 kB)
[ 181.570] (II) intel(0): 0x10000000: end of aperture
[ 181.570] (II) intel(0): BO memory allocation layout:
[ 181.570] (II) intel(0): 0x01fff000: start of memory manager
[ 181.570] (II) intel(0): 0x02020000-0x0243ffff: front buffer (4224 kB) X tiled
[ 181.570] (II) intel(0): 0x02520000-0x02529fff: HW cursors (40 kB)
[ 181.570] (II) intel(0): 0x10000000: end of memory manager
[ 181.719]
##############################################
*** In function I830InitHWCursor, on line 82, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_cursor.c ***
[ 181.720] I830InitHWCursor
[ 181.720] ##############################################
[ 181.805]
##############################################
*** In function ironlake_edp_backlight_off, on line 920, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 181.805]
[ 181.805] ##############################################
[ 182.127] Plane disable
[ 182.127] Pipe disable
[ 182.147] PFIT disable
[ 182.147] FDI TX disable
[ 182.147] FDI RX disable
[ 182.167] FDI TX train 1 preload
[ 182.167] FDI RX train 1 preload
[ 182.187] LVDS port force off
[ 182.187] Transcoder disable
[ 182.207] PCH DPLL disable
[ 182.207] FDI RX PLL PCD disable
[ 182.208] FDI TX PLL disable 00024040
[ 182.227] FDI RX PLL disable 00044000
[ 182.247] DPMS off done
[ 182.267] Plane disable
[ 182.268] Pipe disable
[ 182.288] PFIT disable
[ 182.288] FDI TX disable
[ 182.288] FDI RX disable
[ 182.308] FDI TX train 1 preload
[ 182.308] FDI RX train 1 preload
[ 182.328] LVDS port force off
[ 182.328] Transcoder disable
[ 182.348] PCH DPLL disable
[ 182.348] FDI RX PLL PCD disable
[ 182.348] FDI TX PLL disable 00004040
[ 182.368] FDI RX PLL disable 00044000
[ 182.388] DPMS off done
[ 182.409]
##############################################
*** In function i830_dp_mode_fixup, on line 635, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 182.409] Display port link bw 0a lane count 1 clock 270000
[ 182.409] ##############################################
[ 182.409]
##############################################
*** In function ironlake_edp_backlight_off, on line 920, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 182.409]
[ 182.409] ##############################################
[ 182.718]
##############################################
*** In function ironlake_edp_pll_on, on line 932, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 182.718]
[ 182.718] ##############################################
[ 182.738] Plane disable
[ 182.738] Pipe disable
[ 182.758] PFIT disable
[ 182.758] FDI TX disable
[ 182.758] FDI RX disable
[ 182.778] FDI TX train 1 preload
[ 182.778] FDI RX train 1 preload
[ 182.798] LVDS port force off
[ 182.798] Transcoder disable
[ 182.818] PCH DPLL disable
[ 182.818] FDI RX PLL PCD disable
[ 182.818] FDI TX PLL disable 00024040
[ 182.838] FDI RX PLL disable 00044000
[ 182.858] DPMS off done
[ 182.878] (WW) intel(0): Chosen PLL clock of 216.0 Mhz more than 2% away from desired 270.0 Mhz
[ 182.878] bpp 6
[ 182.938]
##############################################
*** In function ironlake_set_pll_edp, on line 1665, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_display.c ***
[ 182.938] eDP PLL enable for clock 270000
[ 182.938] ##############################################
[ 183.038] Pipe enable
[ 183.038] Plane enable
[ 183.038] LUT load
[ 183.038] DPMS on done
[ 183.278]
##############################################
*** In function ironlake_edp_backlight_on, on line 902, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 183.278]
[ 183.278] ##############################################
[ 183.588] Plane disable
[ 183.588] Pipe disable
[ 183.608] PFIT disable
[ 183.608] FDI TX disable
[ 183.608] FDI RX disable
[ 183.628] FDI TX train 1 preload
[ 183.628] FDI RX train 1 preload
[ 183.648] LVDS port force off
[ 183.648] Transcoder disable
[ 183.668] PCH DPLL disable
[ 183.668] FDI RX PLL PCD disable
[ 183.668] FDI TX PLL disable 00004040
[ 183.688] FDI RX PLL disable 00044000
[ 183.708] DPMS off done
[ 183.729] (II) intel(0): Output configuration:
[ 183.729] (II) intel(0): Pipe A is on
[ 183.729] (II) intel(0): Display plane A is now enabled and connected to pipe A.
[ 183.729] (II) intel(0): Pipe B is off
[ 183.729] (II) intel(0): Display plane B is now disabled and connected to pipe B.
[ 183.729] (II) intel(0): Output VGA is connected to pipe none
[ 183.729] (II) intel(0): Output eDP is connected to pipe A
[ 183.729] (II) intel(0): Output HDMI-3 is connected to pipe none
[ 183.729] (II) intel(0): Output DP-B is connected to pipe none
[ 183.729] (II) intel(0): Output HDMI-4 is connected to pipe none
[ 183.729] (II) intel(0): Output DP-C is connected to pipe none
[ 183.769]
##############################################
*** In function i830_dp_i2c_aux_ch, on line 562, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 183.769] aux_i2c nack
[ 183.769] ##############################################
[ 186.410] (II) intel(0): EDID vendor "LGD", prod id 589
[ 186.410] (II) intel(0): Printing DDC gathered Modelines:
[ 186.410] (II) intel(0): Modeline "1366x768"x0.0 75.50 1366 1414 1446 1581 768 771 777 793 +hsync -vsync (47.8 kHz)
[ 186.410] (II) intel(0): Modeline "1366x768"x0.0 50.30 1366 1414 1446 1576 768 771 777 793 +hsync -vsync (31.9 kHz)
[ 186.410] (II) intel(0): EDID vendor "LGD", prod id 589
[ 186.430]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 186.430] dp_aux_ch timeout status 0x5145003e
[ 186.430] ##############################################
[ 186.430]
##############################################
*** In function ironlake_dp_detect, on line 1513, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 186.430] DPCD: 0000
[ 186.430] ##############################################
[ 186.450]
##############################################
*** In function i830_dp_aux_ch, on line 385, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 186.450] dp_aux_ch timeout status 0x5145003e
[ 186.450] ##############################################
[ 186.450]
##############################################
*** In function ironlake_dp_detect, on line 1513, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 186.450] DPCD: 0000
[ 186.450] ##############################################
[ 186.460] Pipe enable
[ 186.460] Plane enable
[ 186.460] LUT load
[ 186.460] DPMS on done
[ 186.460]
##############################################
*** In function ironlake_edp_backlight_on, on line 902, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_dp.c ***
[ 186.460]
[ 186.460] ##############################################
[ 200.111] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Input/output error.
[ 201.224]
##############################################
*** In function I830LeaveVT, on line 2875, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 201.224] Leave VT
[ 201.224] ##############################################
[ 205.032] (II) UnloadModule: "kbd"
[ 205.032] (II) Unloading kbd
[ 205.032] (II) UnloadModule: "mouse"
[ 205.032] (II) Unloading mouse
[ 205.033]
##############################################
*** In function I830CloseScreen, on line 3064, in file /home/sutre/NetBSD/xsrc/external/mit/xf86-video-intel/dist/src/i830_driver.c ***
[ 205.033]
Unmapping memory
[ 205.033] ##############################################
dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.55 (GENERIC) #24: Sun Sep 25 19:03:12 CEST 2011
sutre@tahoe:/data/sutre/build-amd64/home/sutre/NetBSD/src/sys/arch/amd64/compile/GENERIC
total memory = 8117 MB
avail memory = 7867 MB
timecounter: Timecounters tick every 10.000 msec
No bootinfo commands at boot
RTC BIOS diagnostic error 0x30
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.6 @ 0xf2460 (66 entries)
Dell Inc. Latitude E4310 (0001)
mainbus0 (root)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40, using 32 (20110623/tbfadt-517)
cpu0 at mainbus0 apid 0cpu0: 8 page colors
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
timecounter: Timecounter "lapic" frequency 133089584 Hz quality -100
: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu0: PAT enabled
cpu1 at mainbus0 apid 4x86_ipi_init: ESR 00000040
: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu1: PAT enabled
cpu2 at mainbus0 apid 1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu2: PAT enabled
cpu3 at mainbus0 apid 5: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, id 0x20655
cpu3: PAT enabled
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId , AslId
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpi0: ACPI-Fast 24-bit timer
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (ECDV, PNP0C09-0): io 0x930,0x934
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
UAR1 (PNP0501) at acpi0 not configured
pckbc2 at acpi0 (PS2M, DLL0410) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
A_CC (SMO8800) at acpi0 not configured
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpivga0: capabilities: _DOS _DOD
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout0: capabilities: _DCS _DGS _DSS
acpiout1 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1: capabilities: _BCL _BCM _BQC _DCS _DGS _DSS
acpiout1: brightness levels: 0 6 13 20 26 33 40 46 53 60 66 73 80 86 93 100
acpiout2 at acpivga0 (DVI, 0x0302): ACPI Display Output Device
acpiout2: capabilities: _DCS _DGS _DSS
acpiout3 at acpivga0 (DVI2, 0x0303): ACPI Display Output Device
acpiout3: capabilities: _DCS _DGS _DSS
acpiout4 at acpivga0 (DP, 0x0300): ACPI Display Output Device
acpiout4: capabilities: _DCS _DGS _DSS
acpiout5 at acpivga0 (DP2, 0x0301): ACPI Display Output Device
acpiout5: capabilities: _DCS _DGS _DSS
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
acpivga0: 0x0302 (acpiout2): Unknown Output Device, head 0
acpivga0: 0x0303 (acpiout3): Unknown Output Device, head 0
acpivga0: 0x0300 (acpiout4): Unknown Output Device, head 0
acpivga0: 0x0301 (acpiout5): Unknown Output Device, head 0
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: SMP LION rechargeable battery
acpibat0: model number DELL Y266P09, serial number 132
acpibat0: granularity: low->warn 0.028 Ah, warn->full 0.028 Ah
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
acpiwmi0: {8D9DDCBC-A997-11DA-B012-B622A1EF5492} oid 4141 count 01 flags 00
acpiwmi0: {A80593CE-A997-11DA-B012-B622A1EF5492} oid 4142 count 01 flags 02
acpiwmi0: {9DBB5994-A997-11DA-B012-B622A1EF5492} oid 00D0 count 01 flags 08
acpiwmi0: {A3776CE0-1E88-11DB-A98B-0800200C9A66} oid 4342 count 01 flags 00
acpiwmi0: {05901221-D566-11D1-B2F0-00A0C9062910} oid 4F4D count 01 flags 00
wmidell0 at acpiwmi0: Dell WMI mappings
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pms0: synaptics_probe: Not synaptics.
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0044 (rev. 0x02)
agp0 at pchb0: detected 32764k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0046 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
inteldrm has not been converted to device_t
inteldrm0 at vga0: ioapic0 pin 16
drmdev has not been converted to device_t
drmdev0 at inteldrm0
wm0 at pci0 dev 25 function 0: PCH LAN (82577LM) Controller, rev. 5
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 5c:26:0a:13:8f:e1
ihphy0 at wm0 phy 2: i82577 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
usb0: WARNING: power management not supported
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0 vendor 0x111D product 0x7605 nid 0x01: Sigmatel 92HD81B1X5
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
nid=0D [pin: Speaker (Built-In)]
nid=13 [audio output] [source: dac]
nid=0B [pin: HP Out (Black Jack)]
nid=13 [audio output] [source: dac]
hdafg0: ADC01 2ch: Mic In [Jack]
nid=0A [pin: Mic In (Black Jack)]
nid=0F [pin: Mic In (Black Jack)]
hdafg0: ADC02 2ch: Mic In [Built-In]
nid=11 [pin: Mic In (Built-In)]
hdafg0: DAC03 2ch: Speaker [Jack]
nid=0E [pin: Speaker (Black Jack)]
nid=14 [audio output] [source: dac]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0 vendor 0x8086 product 0x2804 nid 0x01: Intel G45 HDMI
hdafg1: DP00 8ch: Digital Out [Jack]
nid=04 [pin: Digital Out (Jack)]
nid=02 [audio output] [source: dac]
hdafg1: DP01 8ch: Digital Out [Jack]
nid=05 [pin: Digital OuVanilla X server segfault with drmgem kernel
On i915GM hardware, a vanilla NetBSD -current X server segfaults under a netbsd-drmgem kernel. The problem does not occur when DRI support is disabled in xorg.conf. The dmesg and X.org logs follow.
A similar issue was reported privately, this time on i965GM hardware and modular X.org.
dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.99.12 (GENERIC) #0: Sun Oct 7 23:04:44 CEST 2012
sutre@niagara:/tmp/netbsd-drmgem.usr/src/sys/arch/i386/compile/GENERIC
total memory = 1526 MB
avail memory = 1487 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
FUJITSU SIEMENS LIFEBOOK P7120 ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) M processor 1.20GHz, id 0x6d8
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId , AslId
ioapic0 reenabling
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
MCFG (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: 1 15 29 43 57 71 85 100
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x0300): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0, bios detect
acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
acpivga0: 0x0300 (acpiout3): Unknown Output Device, head 0, bios detect
MBIO (PNP0C02) at acpi0 not configured
fujbp0 at acpi0 (FJEX, FUJ02B1): Fujitsu Brightness & Pointer
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
fujhk0 at acpi0 (FEXT, FUJ02E3): Fujitsu Hotkeys
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (CMB1, PNP0C0A-1): ACPI Battery
acpibat0: Fujitsu LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah
acpibat1 at acpi0 (CMB2, PNP0C0A-2): ACPI Battery
acpitz0 at acpi0 (TZ00)
acpitz0: levels: critical 105.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Up/down buttons, Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2590 (rev. 0x04)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
inteldrm has not been converted to device_t
inteldrm0 at vga1: ioapic0 pin 16
drmdev has not been converted to device_t
drmdev0 at inteldrm0
vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: Realtek ALC260
hdafg0: duplicate pin in association
hdafg0: ADC01 2ch: Line In [Built-In], AUX [Built-In], Mic In [Jack]
hdafg0: 0ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
hdvsmfg at hdaudio0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4)
pci1 at ppb0 bus 6
pci1: i/o space, memory space enabled
cbb0 at pci1 dev 3 function 0: vendor 0x1180 product 0x0476 (rev. 0xb3)
fwohci0 at pci1 dev 3 function 1: vendor 0x1180 product 0x0552 (rev. 0x08)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:0e:10:03:8b:4c:05
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci1 dev 3 function 2: vendor 0x1180 product 0x0822 (rev. 0x17)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SD Host Specification 1.0, rev.2
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x08) at pci1 dev 3 function 3 not configured
vendor 0x1180 product 0x0852 (miscellaneous system, revision 0x03) at pci1 dev 3 function 4 not configured
rtk0 at pci1 dev 4 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20
rtk0: Ethernet address 00:17:42:02:39:db
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
iwi0 at pci1 dev 5 function 0: vendor 0x8086 product 0x4223 (rev. 0x05)
iwi0: interrupting at ioapic0 pin 18
iwi0: 802.11 address 00:16:6f:75:e7:5f
iwi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 7
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2641 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 1: Intel 82801FB IDE Controller (ICH6) (rev. 0x04)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: C2: I/O, lat 1 us, pow 0 mW
acpicpu0: C3: I/O, lat 185 us, pow 0 mW
acpicpu0: P0: FFH, lat 10 us, pow 5500 mW, 1200 MHz
acpicpu0: P1: FFH, lat 10 us, pow 5100 mW, 1100 MHz
acpicpu0: P2: FFH, lat 10 us, pow 4700 mW, 1000 MHz
acpicpu0: P3: FFH, lat 10 us, pow 4300 mW, 900 MHz
acpicpu0: P4: FFH, lat 10 us, pow 3900 mW, 800 MHz
acpicpu0: P5: FFH, lat 10 us, pow 3000 mW, 600 MHz
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter offline.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ehci0: handing over full speed device on port 5 to uhci2
wd0 at atabus0 drive 0
wd0:
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
ugen0 at uhub2 port 1
ugen0: vendor 0x08ff Fingerprint Sensor, rev 1.10/6.21, addr 2
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
iwi0: EULA not accepted; please see the iwi(4) man page.
iwi0: could not cache the firmware
iwi0: cannot assign link-local address
iwi0: EULA not accepted; please see the iwi(4) man page.
iwi0: could not cache the firmware
cprng sysctl: WARNING pseudorandom rekeying.
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
acpibat0: normal capacity on 'charge state'
cprng kernel: WARNING pseudorandom rekeying.
X log
[ 248.436]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 248.436] X Protocol Version 11, Revision 0
[ 248.436] Build Operating System: NetBSD/i386 -
[ 248.436] Current Operating System: NetBSD niagara 6.99.12 NetBSD 6.99.12 (GENERIC) #0: Sun Oct 7 23:04:44 CEST 2012 sutre@niagara:/tmp/netbsd-drmgem.usr/src/sys/arch/i386/compile/GENERIC i386
[ 248.437] Build Date: 01 August 2011 01:01:00AM
[ 248.437]
[ 248.437] Current version of pixman: 0.23.2
[ 248.437] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 248.437] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 248.438] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 11 01:19:39 2012
[ 248.438] (==) Using config file: "/etc/X11/xorg.conf"
[ 248.438] (==) No Layout section. Using the first Screen section.
[ 248.438] (==) No screen section available. Using defaults.
[ 248.438] (**) |-->Screen "Default Screen Section" (0)
[ 248.438] (**) | |-->Monitor ""
[ 248.438] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 248.439] (**) | |-->Device "Card0"
[ 248.439] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 248.439] (==) Not automatically adding devices
[ 248.439] (==) Not automatically enabling devices
[ 248.439] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 248.439] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 248.439] (==) |-->Input Device ""
[ 248.440] (==) |-->Input Device ""
[ 248.440] (==) No Layout section. Using the default mouse configuration.
[ 248.440] (==) No Layout section. Using the default keyboard configuration.
[ 248.440] (II) Loader magic: 0x822b6e0
[ 248.440] (II) Module ABI versions:
[ 248.440] X.Org ANSI C Emulation: 0.4
[ 248.440] X.Org Video Driver: 10.0
[ 248.440] X.Org XInput driver : 12.2
[ 248.440] X.Org Server Extension : 5.0
[ 248.444] (--) PCI:*(0:0:2:0) 8086:2592:10cf:12e2 rev 4, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001400/8
[ 248.445] (--) PCI: (0:0:2:1) 8086:2792:10cf:12e2 rev 4, Mem @ 0x00000000/524288
[ 248.445] (II) LoadModule: "extmod"
[ 248.448] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 248.448] (II) Module extmod: vendor="X.Org Foundation"
[ 248.448] compiled for 1.10.3, module version = 1.0.0
[ 248.448] Module class: X.Org Server Extension
[ 248.448] ABI class: X.Org Server Extension, version 5.0
[ 248.449] (II) Loading extension MIT-SCREEN-SAVER
[ 248.449] (II) Loading extension XFree86-VidModeExtension
[ 248.449] (II) Loading extension XFree86-DGA
[ 248.449] (II) Loading extension DPMS
[ 248.449] (II) Loading extension XVideo
[ 248.449] (II) Loading extension XVideo-MotionCompensation
[ 248.449] (II) Loading extension X-Resource
[ 248.449] (II) LoadModule: "dbe"
[ 248.451] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 248.452] (II) Module dbe: vendor="X.Org Foundation"
[ 248.452] compiled for 1.10.3, module version = 1.0.0
[ 248.452] Module class: X.Org Server Extension
[ 248.452] ABI class: X.Org Server Extension, version 5.0
[ 248.452] (II) Loading extension DOUBLE-BUFFER
[ 248.452] (II) LoadModule: "glx"
[ 248.455] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 248.455] (II) Module glx: vendor="X.Org Foundation"
[ 248.455] compiled for 1.10.3, module version = 1.0.0
[ 248.455] ABI class: X.Org Server Extension, version 5.0
[ 248.455] (==) AIGLX enabled
[ 248.455] (II) Loading extension GLX
[ 248.455] (II) LoadModule: "record"
[ 248.458] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 248.458] (II) Module record: vendor="X.Org Foundation"
[ 248.458] compiled for 1.10.3, module version = 1.13.0
[ 248.458] Module class: X.Org Server Extension
[ 248.459] ABI class: X.Org Server Extension, version 5.0
[ 248.459] (II) Loading extension RECORD
[ 248.459] (II) LoadModule: "dri"
[ 248.461] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 248.461] (II) Module dri: vendor="X.Org Foundation"
[ 248.461] compiled for 1.10.3, module version = 1.0.0
[ 248.461] ABI class: X.Org Server Extension, version 5.0
[ 248.462] (II) Loading extension XFree86-DRI
[ 248.462] (II) LoadModule: "dri2"
[ 248.464] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 248.464] (II) Module dri2: vendor="X.Org Foundation"
[ 248.464] compiled for 1.10.3, module version = 1.2.0
[ 248.464] ABI class: X.Org Server Extension, version 5.0
[ 248.465] (II) Loading extension DRI2
[ 248.465] (II) LoadModule: "intel"
[ 248.466] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 248.467] (II) Module intel: vendor="X.Org Foundation"
[ 248.467] compiled for 1.10.3, module version = 2.7.1
[ 248.467] Module class: X.Org Video Driver
[ 248.467] ABI class: X.Org Video Driver, version 10.0
[ 248.467] (II) LoadModule: "mouse"
[ 248.469] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 248.469] (II) Module mouse: vendor="X.Org Foundation"
[ 248.469] compiled for 1.10.3, module version = 1.7.1
[ 248.469] Module class: X.Org XInput Driver
[ 248.469] ABI class: X.Org XInput driver, version 12.2
[ 248.469] (II) LoadModule: "kbd"
[ 248.471] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 248.471] (II) Module kbd: vendor="X.Org Foundation"
[ 248.471] compiled for 1.10.3, module version = 1.6.0
[ 248.471] Module class: X.Org XInput Driver
[ 248.471] ABI class: X.Org XInput driver, version 12.2
[ 248.471] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
[ 248.473] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 248.473] (--) using VT number 5
[ 248.485] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 248.485] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 248.485] (II) Loading sub module "vgahw"
[ 248.485] (II) LoadModule: "vgahw"
[ 248.488] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 248.488] (II) Module vgahw: vendor="X.Org Foundation"
[ 248.488] compiled for 1.10.3, module version = 0.1.0
[ 248.488] ABI class: X.Org Video Driver, version 10.0
[ 248.488] (II) Loading sub module "ramdac"
[ 248.488] (II) LoadModule: "ramdac"
[ 248.489] (II) Module "ramdac" already built-in
[ 248.489] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 248.489] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 248.489] (==) intel(0): RGB weight 888
[ 248.489] (==) intel(0): Default visual is TrueColor
[ 248.489] (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[ 248.489] (--) intel(0): Chipset: "915GM"
[ 248.489] (--) intel(0): Linear framebuffer at 0xC0000000
[ 248.489] (--) intel(0): IO registers at addr 0xB0080000
[ 248.489] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 248.490] (==) intel(0): Using EXA for acceleration
[ 248.491] (II) intel(0): 2 display pipes available.
[ 248.491] (II) Loading sub module "ddc"
[ 248.491] (II) LoadModule: "ddc"
[ 248.491] (II) Module "ddc" already built-in
[ 248.491] (II) Loading sub module "i2c"
[ 248.491] (II) LoadModule: "i2c"
[ 248.491] (II) Module "i2c" already built-in
[ 248.491] (II) intel(0): Output VGA has no monitor section
[ 248.491] (II) intel(0): Output LVDS has no monitor section
[ 248.491] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[ 248.491] (II) intel(0): Attempting to determine panel fixed mode.
[ 248.491] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
[ 248.495] (II) intel(0): EDID for output LVDS
[ 248.495] (II) intel(0): Output TV has no monitor section
[ 248.496] (WW) intel(0): remove MTRR a0000 - b0000
[ 248.593] (II) intel(0): Resizable framebuffer: not available (1 3)
[ 248.893] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 248.893] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 249.563] (II) intel(0): EDID for output VGA
[ 249.567] (II) intel(0): EDID for output LVDS
[ 249.567] (II) intel(0): Printing probed modes for output LVDS
[ 249.567] (II) intel(0): Modeline "1280x768"x59.8 81.00 1280 1328 1440 1688 768 771 777 802 (48.0 kHz)
[ 250.203] (II) intel(0): EDID for output TV
[ 250.203] (II) intel(0): Output VGA disconnected
[ 250.203] (II) intel(0): Output LVDS connected
[ 250.204] (II) intel(0): Output TV disconnected
[ 250.204] (II) intel(0): Using exact sizes for initial modes
[ 250.204] (II) intel(0): Output LVDS using initial mode 1280x768
[ 250.204] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 250.704] (WW) intel(0): remove MTRR a0000 - b0000
[ 250.742] (II) intel(0): detected 256 kB GTT.
[ 250.742] (II) intel(0): detected 7932 kB stolen memory.
[ 250.742] (==) intel(0): video overlay key set to 0x101fe
[ 250.742] (==) intel(0): DPI set to (96, 96)
[ 250.742] (II) Loading sub module "fb"
[ 250.743] (II) LoadModule: "fb"
[ 250.746] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 250.746] (II) Module fb: vendor="X.Org Foundation"
[ 250.746] compiled for 1.10.3, module version = 1.0.0
[ 250.746] ABI class: X.Org ANSI C Emulation, version 0.4
[ 250.746] (II) Loading sub module "exa"
[ 250.746] (II) LoadModule: "exa"
[ 250.749] (II) Loading /usr/X11R7/lib/modules/libexa.so
[ 250.750] (II) Module exa: vendor="X.Org Foundation"
[ 250.750] compiled for 1.10.3, module version = 2.5.0
[ 250.750] ABI class: X.Org Video Driver, version 10.0
[ 250.750] (II) intel(0): Comparing regs from server start up to After PreInit
[ 250.750] (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
[ 250.750] (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
[ 250.750] (WW) intel(0): PP_STATUS after: on, ready, sequencing on
[ 250.751] (==) Depth 24 pixmap format is 32 bpp
[ 250.751] (II) intel(0): Kernel reported 491520 total, 0 used
[ 250.751] (II) intel(0): I830CheckAvailableMemory: 1966080 kB available
[ 250.751] (WW) intel(0): DRI2 requires UXA
[ 250.751] drmOpenDevice: node name is /dev/dri/card0
[ 250.751] drmOpenDevice: open result is 11, (OK)
[ 250.751] drmOpenDevice: node name is /dev/dri/card0
[ 250.751] drmOpenDevice: open result is 11, (OK)
[ 250.751] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 250.752] drmOpenDevice: node name is /dev/dri/card0
[ 250.752] drmOpenDevice: open result is 11, (OK)
[ 250.752] drmOpenByBusid: drmOpenMinor returns 11
[ 250.752] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 250.752] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 250.752] (II) [drm] DRM interface version 1.2
[ 250.752] (II) [drm] DRM open master succeeded.
[ 250.752] (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
[ 250.752] (II) intel(0): [drm] framebuffer mapped by ddx driver
[ 250.752] (II) intel(0): [drm] added 1 reserved context for kernel
[ 250.752] (II) intel(0): X context handle = 0x1
[ 250.753] (WW) fcntl(11, F_SETOWN): Invalid argument
[ 250.753] (EE) intel(0): [drm] failed to setup DRM signal handler
[ 250.753] (EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
[ 250.753] (**) intel(0): Framebuffer compression enabled
[ 250.753] (**) intel(0): Tiling enabled
[ 250.753] (==) intel(0): VideoRam: 262144 KB
[ 250.754] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 250.754] (II) intel(0): Tiled allocation successful.
[ 250.936] (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
[ 250.936] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 250.936] (WW) intel(0): remove MTRR a0000 - b0000
[ 250.937] (II) EXA(0): Offscreen pixmap area of 31457280 bytes
[ 250.938] (II) EXA(0): Driver registered support for the following operations:
[ 250.938] (II) Solid
[ 250.938] (II) Copy
[ 250.938] (II) Composite (RENDER acceleration)
[ 250.938] (==) intel(0): Backing store disabled
[ 250.938] (==) intel(0): Silken mouse enabled
[ 250.938] (II) intel(0): Initializing HW Cursor
[ 250.938] (WW) intel(0): drmDropMaster failed: Unknown error: 4294967295
[ 251.844] (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007bf000 (pgoffset 1983)
[ 251.847] (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x00e2b000 (pgoffset 3627)
[ 251.847] (II) intel(0): xf86BindGARTMemory: bind key 6 at 0x01000000 (pgoffset 4096)
[ 251.851] (II) intel(0): xf86BindGARTMemory: bind key 7 at 0x02000000 (pgoffset 8192)
[ 251.858] (II) intel(0): Fixed memory allocation layout:
[ 251.858] (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
[ 251.858] (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
)
[ 251.858] (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
)
[ 251.858] (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
)
[ 251.858] (II) intel(0): 0x0062b000-0x00e2afff: fake bufmgr (8192 kB)
[ 251.858] (II) intel(0): 0x007bf000: end of stolen memory
[ 251.858] (II) intel(0): 0x00e2b000-0x00e2bfff: overlay registers (4 kB, 0x0000000006520000 physical
)
[ 251.859] (II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
[ 251.859] (II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
[ 251.859] (II) intel(0): 0x10000000: end of aperture
[ 252.094] (II) intel(0): using SSC reference clock of 96 MHz
[ 252.114] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[ 252.585] (II) intel(0): Output configuration:
[ 252.585] (II) intel(0): Pipe A is off
[ 252.585] (II) intel(0): Display plane B is now disabled and connected to pipe A.
[ 252.585] (II) intel(0): Pipe B is on
[ 252.585] (II) intel(0): Display plane A is now enabled and connected to pipe B.
[ 252.585] (II) intel(0): Output VGA is connected to pipe none
[ 252.585] (II) intel(0): Output LVDS is connected to pipe B
[ 252.585] (II) intel(0): Output TV is connected to pipe none
[ 252.585] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 252.585] (==) intel(0): DPMS enabled
[ 252.585] (==) intel(0): Intel XvMC decoder disabled
[ 252.586] (II) intel(0): Set up textured video
[ 252.586] (II) intel(0): Set up overlay video
[ 252.586] (II) intel(0): direct rendering: Failed
[ 252.586] (--) RandR disabled
[ 252.586] (II) Initializing built-in extension Generic Event Extension
[ 252.586] (II) Initializing built-in extension SHAPE
[ 252.586] (II) Initializing built-in extension MIT-SHM
[ 252.586] (II) Initializing built-in extension XInputExtension
[ 252.586] (II) Initializing built-in extension XTEST
[ 252.586] (II) Initializing built-in extension BIG-REQUESTS
[ 252.586] (II) Initializing built-in extension SYNC
[ 252.586] (II) Initializing built-in extension XKEYBOARD
[ 252.586] (II) Initializing built-in extension XC-MISC
[ 252.586] (II) Initializing built-in extension SECURITY
[ 252.586] (II) Initializing built-in extension XINERAMA
[ 252.586] (II) Initializing built-in extension XFIXES
[ 252.586] (II) Initializing built-in extension XFree86-Bigfont
[ 252.586] (II) Initializing built-in extension RENDER
[ 252.586] (II) Initializing built-in extension RANDR
[ 252.587] (II) Initializing built-in extension COMPOSITE
[ 252.587] (II) Initializing built-in extension DAMAGE
[ 252.610] (II) AIGLX: Screen 0 is not DRI2 capable
[ 252.610] drmOpenDevice: node name is /dev/dri/card0
[ 252.611] drmOpenDevice: open result is 12, (OK)
[ 252.611] [ 252.611] Segmentation fault at address 0x3
[ 252.611]
Fatal server error:
[ 252.611] Caught signal 11 (Segmentation fault). Server aborting
[ 252.611]
[ 252.611]
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
[ 252.611] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 252.611]
[ 254.247] (II) intel(0): xf86UnbindGARTMemory: unbind key 4
[ 254.247] (II) intel(0): xf86UnbindGARTMemory: unbind key 5
[ 254.249] (II) intel(0): xf86UnbindGARTMemory: unbind key 6
[ 254.254] (II) intel(0): xf86UnbindGARTMemory: unbind key 7
[ 254.254] (WW) intel(0): drmDropMaster failed: Unknown error: 4294967295
X log, no DRI
[ 474.721]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 474.721] X Protocol Version 11, Revision 0
[ 474.722] Build Operating System: NetBSD/i386 -
[ 474.722] Current Operating System: NetBSD niagara 6.99.12 NetBSD 6.99.12 (GENERIC) #0: Sun Oct 7 23:04:44 CEST 2012 sutre@niagara:/tmp/netbsd-drmgem.usr/src/sys/arch/i386/compile/GENERIC i386
[ 474.722] Build Date: 01 August 2011 01:01:00AM
[ 474.723]
[ 474.723] Current version of pixman: 0.23.2
[ 474.723] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 474.723] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 474.723] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 11 01:23:25 2012
[ 474.723] (==) Using config file: "/etc/X11/xorg.conf"
[ 474.724] (==) No Layout section. Using the first Screen section.
[ 474.724] (==) No screen section available. Using defaults.
[ 474.724] (**) |-->Screen "Default Screen Section" (0)
[ 474.724] (**) | |-->Monitor ""
[ 474.724] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 474.724] (**) | |-->Device "Card0"
[ 474.724] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 474.724] (==) Not automatically adding devices
[ 474.724] (==) Not automatically enabling devices
[ 474.725] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 474.725] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 474.725] (==) |-->Input Device ""
[ 474.725] (==) |-->Input Device ""
[ 474.725] (==) No Layout section. Using the default mouse configuration.
[ 474.725] (==) No Layout section. Using the default keyboard configuration.
[ 474.725] (II) Loader magic: 0x822b6e0
[ 474.725] (II) Module ABI versions:
[ 474.725] X.Org ANSI C Emulation: 0.4
[ 474.726] X.Org Video Driver: 10.0
[ 474.726] X.Org XInput driver : 12.2
[ 474.726] X.Org Server Extension : 5.0
[ 474.730] (--) PCI:*(0:0:2:0) 8086:2592:10cf:12e2 rev 4, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001400/8
[ 474.730] (--) PCI: (0:0:2:1) 8086:2792:10cf:12e2 rev 4, Mem @ 0x00000000/524288
[ 474.730] (II) LoadModule: "extmod"
[ 474.733] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 474.734] (II) Module extmod: vendor="X.Org Foundation"
[ 474.734] compiled for 1.10.3, module version = 1.0.0
[ 474.734] Module class: X.Org Server Extension
[ 474.734] ABI class: X.Org Server Extension, version 5.0
[ 474.734] (II) Loading extension MIT-SCREEN-SAVER
[ 474.734] (II) Loading extension XFree86-VidModeExtension
[ 474.734] (II) Loading extension XFree86-DGA
[ 474.734] (II) Loading extension DPMS
[ 474.734] (II) Loading extension XVideo
[ 474.734] (II) Loading extension XVideo-MotionCompensation
[ 474.735] (II) Loading extension X-Resource
[ 474.735] (II) LoadModule: "dbe"
[ 474.737] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 474.737] (II) Module dbe: vendor="X.Org Foundation"
[ 474.737] compiled for 1.10.3, module version = 1.0.0
[ 474.737] Module class: X.Org Server Extension
[ 474.738] ABI class: X.Org Server Extension, version 5.0
[ 474.738] (II) Loading extension DOUBLE-BUFFER
[ 474.738] (II) LoadModule: "glx"
[ 474.740] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 474.741] (II) Module glx: vendor="X.Org Foundation"
[ 474.741] compiled for 1.10.3, module version = 1.0.0
[ 474.741] ABI class: X.Org Server Extension, version 5.0
[ 474.741] (==) AIGLX enabled
[ 474.741] (II) Loading extension GLX
[ 474.741] (II) LoadModule: "record"
[ 474.744] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 474.744] (II) Module record: vendor="X.Org Foundation"
[ 474.744] compiled for 1.10.3, module version = 1.13.0
[ 474.744] Module class: X.Org Server Extension
[ 474.744] ABI class: X.Org Server Extension, version 5.0
[ 474.744] (II) Loading extension RECORD
[ 474.744] (II) LoadModule: "dri"
[ 474.747] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 474.747] (II) Module dri: vendor="X.Org Foundation"
[ 474.747] compiled for 1.10.3, module version = 1.0.0
[ 474.747] ABI class: X.Org Server Extension, version 5.0
[ 474.747] (II) Loading extension XFree86-DRI
[ 474.747] (II) LoadModule: "dri2"
[ 474.750] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 474.750] (II) Module dri2: vendor="X.Org Foundation"
[ 474.750] compiled for 1.10.3, module version = 1.2.0
[ 474.750] ABI class: X.Org Server Extension, version 5.0
[ 474.750] (II) Loading extension DRI2
[ 474.750] (II) LoadModule: "intel"
[ 474.752] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 474.753] (II) Module intel: vendor="X.Org Foundation"
[ 474.753] compiled for 1.10.3, module version = 2.7.1
[ 474.753] Module class: X.Org Video Driver
[ 474.753] ABI class: X.Org Video Driver, version 10.0
[ 474.753] (II) LoadModule: "mouse"
[ 474.754] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 474.755] (II) Module mouse: vendor="X.Org Foundation"
[ 474.755] compiled for 1.10.3, module version = 1.7.1
[ 474.755] Module class: X.Org XInput Driver
[ 474.755] ABI class: X.Org XInput driver, version 12.2
[ 474.755] (II) LoadModule: "kbd"
[ 474.756] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 474.757] (II) Module kbd: vendor="X.Org Foundation"
[ 474.757] compiled for 1.10.3, module version = 1.6.0
[ 474.757] Module class: X.Org XInput Driver
[ 474.757] ABI class: X.Org XInput driver, version 12.2
[ 474.757] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
[ 474.759] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 474.759] (--) using VT number 5
[ 474.770] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 474.770] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 474.770] (II) Loading sub module "vgahw"
[ 474.770] (II) LoadModule: "vgahw"
[ 474.773] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 474.774] (II) Module vgahw: vendor="X.Org Foundation"
[ 474.774] compiled for 1.10.3, module version = 0.1.0
[ 474.774] ABI class: X.Org Video Driver, version 10.0
[ 474.774] (II) Loading sub module "ramdac"
[ 474.774] (II) LoadModule: "ramdac"
[ 474.774] (II) Module "ramdac" already built-in
[ 474.774] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 474.774] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 474.774] (==) intel(0): RGB weight 888
[ 474.774] (==) intel(0): Default visual is TrueColor
[ 474.774] (**) intel(0): Option "DRI" "No"
[ 474.774] (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[ 474.774] (--) intel(0): Chipset: "915GM"
[ 474.774] (--) intel(0): Linear framebuffer at 0xC0000000
[ 474.774] (--) intel(0): IO registers at addr 0xB0080000
[ 474.774] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 474.775] (==) intel(0): Using EXA for acceleration
[ 474.776] (II) intel(0): 2 display pipes available.
[ 474.776] (II) Loading sub module "ddc"
[ 474.776] (II) LoadModule: "ddc"
[ 474.776] (II) Module "ddc" already built-in
[ 474.776] (II) Loading sub module "i2c"
[ 474.776] (II) LoadModule: "i2c"
[ 474.776] (II) Module "i2c" already built-in
[ 474.776] (II) intel(0): Output VGA has no monitor section
[ 474.776] (II) intel(0): Output LVDS has no monitor section
[ 474.777] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[ 474.777] (II) intel(0): Attempting to determine panel fixed mode.
[ 474.777] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
[ 474.781] (II) intel(0): EDID for output LVDS
[ 474.781] (II) intel(0): Output TV has no monitor section
[ 474.781] (WW) intel(0): remove MTRR a0000 - b0000
[ 474.878] (II) intel(0): Resizable framebuffer: not available (0 3)
[ 475.178] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 475.179] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 475.848] (II) intel(0): EDID for output VGA
[ 475.852] (II) intel(0): EDID for output LVDS
[ 475.852] (II) intel(0): Printing probed modes for output LVDS
[ 475.852] (II) intel(0): Modeline "1280x768"x59.8 81.00 1280 1328 1440 1688 768 771 777 802 (48.0 kHz)
[ 476.489] (II) intel(0): EDID for output TV
[ 476.489] (II) intel(0): Output VGA disconnected
[ 476.489] (II) intel(0): Output LVDS connected
[ 476.489] (II) intel(0): Output TV disconnected
[ 476.489] (II) intel(0): Using exact sizes for initial modes
[ 476.489] (II) intel(0): Output LVDS using initial mode 1280x768
[ 476.489] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 476.989] (WW) intel(0): remove MTRR a0000 - b0000
[ 477.028] (II) intel(0): detected 256 kB GTT.
[ 477.028] (II) intel(0): detected 7932 kB stolen memory.
[ 477.028] (==) intel(0): video overlay key set to 0x101fe
[ 477.028] (==) intel(0): DPI set to (96, 96)
[ 477.028] (II) Loading sub module "fb"
[ 477.028] (II) LoadModule: "fb"
[ 477.031] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 477.031] (II) Module fb: vendor="X.Org Foundation"
[ 477.031] compiled for 1.10.3, module version = 1.0.0
[ 477.031] ABI class: X.Org ANSI C Emulation, version 0.4
[ 477.031] (II) Loading sub module "exa"
[ 477.032] (II) LoadModule: "exa"
[ 477.034] (II) Loading /usr/X11R7/lib/modules/libexa.so
[ 477.035] (II) Module exa: vendor="X.Org Foundation"
[ 477.035] compiled for 1.10.3, module version = 2.5.0
[ 477.036] ABI class: X.Org Video Driver, version 10.0
[ 477.036] (II) intel(0): Comparing regs from server start up to After PreInit
[ 477.036] (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
[ 477.036] (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
[ 477.036] (WW) intel(0): PP_STATUS after: on, ready, sequencing on
[ 477.036] (==) Depth 24 pixmap format is 32 bpp
[ 477.036] (II) intel(0): Kernel reported 491520 total, 0 used
[ 477.036] (II) intel(0): I830CheckAvailableMemory: 1966080 kB available
[ 477.036] (**) intel(0): Framebuffer compression enabled
[ 477.036] (**) intel(0): Tiling enabled
[ 477.037] (==) intel(0): VideoRam: 262144 KB
[ 477.037] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 477.038] (II) intel(0): Tiled allocation successful.
[ 477.219] (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
[ 477.219] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 477.219] (WW) intel(0): remove MTRR a0000 - b0000
[ 477.220] (II) EXA(0): Offscreen pixmap area of 31457280 bytes
[ 477.220] (II) EXA(0): Driver registered support for the following operations:
[ 477.220] (II) Solid
[ 477.220] (II) Copy
[ 477.220] (II) Composite (RENDER acceleration)
[ 477.220] (==) intel(0): Backing store disabled
[ 477.220] (==) intel(0): Silken mouse enabled
[ 477.220] (II) intel(0): Initializing HW Cursor
[ 477.221] (WW) intel(0): drmDropMaster failed: Unknown error: 4294967295
[ 478.120] (II) intel(0): xf86BindGARTMemory: bind key 8 at 0x007bf000 (pgoffset 1983)
[ 478.122] (II) intel(0): xf86BindGARTMemory: bind key 9 at 0x00e2b000 (pgoffset 3627)
[ 478.122] (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x01000000 (pgoffset 4096)
[ 478.126] (II) intel(0): xf86BindGARTMemory: bind key 11 at 0x02000000 (pgoffset 8192)
[ 478.133] (II) intel(0): Fixed memory allocation layout:
[ 478.134] (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
[ 478.134] (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
)
[ 478.134] (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
)
[ 478.134] (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
)
[ 478.134] (II) intel(0): 0x0062b000-0x00e2afff: fake bufmgr (8192 kB)
[ 478.134] (II) intel(0): 0x007bf000: end of stolen memory
[ 478.134] (II) intel(0): 0x00e2b000-0x00e2bfff: overlay registers (4 kB, 0x0000000009c21000 physical
)
[ 478.134] (II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
[ 478.134] (II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
[ 478.134] (II) intel(0): 0x10000000: end of aperture
[ 478.370] (II) intel(0): using SSC reference clock of 96 MHz
[ 478.390] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[ 478.860] (II) intel(0): Output configuration:
[ 478.860] (II) intel(0): Pipe A is off
[ 478.860] (II) intel(0): Display plane B is now disabled and connected to pipe A.
[ 478.860] (II) intel(0): Pipe B is on
[ 478.860] (II) intel(0): Display plane A is now enabled and connected to pipe B.
[ 478.860] (II) intel(0): Output VGA is connected to pipe none
[ 478.860] (II) intel(0): Output LVDS is connected to pipe B
[ 478.860] (II) intel(0): Output TV is connected to pipe none
[ 478.860] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 478.861] (==) intel(0): DPMS enabled
[ 478.861] (==) intel(0): Intel XvMC decoder disabled
[ 478.861] (II) intel(0): Set up textured video
[ 478.861] (II) intel(0): Set up overlay video
[ 478.861] (II) intel(0): direct rendering: Disabled
[ 478.861] (--) RandR disabled
[ 478.861] (II) Initializing built-in extension Generic Event Extension
[ 478.861] (II) Initializing built-in extension SHAPE
[ 478.861] (II) Initializing built-in extension MIT-SHM
[ 478.861] (II) Initializing built-in extension XInputExtension
[ 478.861] (II) Initializing built-in extension XTEST
[ 478.861] (II) Initializing built-in extension BIG-REQUESTS
[ 478.861] (II) Initializing built-in extension SYNC
[ 478.862] (II) Initializing built-in extension XKEYBOARD
[ 478.862] (II) Initializing built-in extension XC-MISC
[ 478.862] (II) Initializing built-in extension SECURITY
[ 478.862] (II) Initializing built-in extension XINERAMA
[ 478.862] (II) Initializing built-in extension XFIXES
[ 478.862] (II) Initializing built-in extension XFree86-Bigfont
[ 478.862] (II) Initializing built-in extension RENDER
[ 478.862] (II) Initializing built-in extension RANDR
[ 478.862] (II) Initializing built-in extension COMPOSITE
[ 478.862] (II) Initializing built-in extension DAMAGE
[ 478.885] (II) AIGLX: Screen 0 is not DRI2 capable
[ 478.885] (II) AIGLX: Screen 0 is not DRI capable
[ 478.914] (II) AIGLX: Loaded and initialized /usr/X11R7/lib/modules/dri/swrast_dri.so
[ 478.914] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 478.915] (II) intel(0): Setting screen physical size to 338 x 203
[ 479.199] (II) XKB: Reusing cached keymap
[ 479.201] (II) Using input driver 'mouse' for ''
[ 479.201] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 479.201] Option "CorePointer"
[ 479.201] (**) Option "CorePointer"
[ 479.201] (**) : always reports core events
[ 479.201] (WW) : No Device specified, looking for one...
[ 479.238] (II) : found Device "/dev/wsmouse"
[ 479.241] (--) : Device: "/dev/wsmouse"
[ 479.241] (==) : Protocol: "WSMouse"
[ 479.241] (**) Option "CorePointer"
[ 479.241] (**) : always reports core events
[ 479.241] (**) Option "Device" "/dev/wsmouse"
[ 479.281] (==) : Emulate3Buttons, Emulate3Timeout: 50
[ 479.281] (**) : ZAxisMapping: buttons 4 and 5
[ 479.281] (**) : Buttons: 9
[ 479.281] (II) XINPUT: Adding extended input device "" (type: MOUSE)
[ 479.281] (**) : (accel) keeping acceleration scheme 1
[ 479.281] (**) : (accel) acceleration profile 0
[ 479.281] (**) : (accel) acceleration factor: 2.000
[ 479.281] (**) : (accel) acceleration threshold: 4
[ 479.281] (**) Option "Device" "/dev/wsmouse"
[ 479.318] (II) Using input driver 'kbd' for ''
[ 479.318] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 479.318] Option "CoreKeyboard"
[ 479.318] (**) Option "CoreKeyboard"
[ 479.318] (**) : always reports core events
[ 479.318] (**) Option "CoreKeyboard"
[ 479.318] (**) : always reports core events
[ 479.318] (**) Option "Protocol" "standard"
[ 479.318] (**) Option "XkbRules" "base"
[ 479.318] (**) Option "XkbModel" "pc105"
[ 479.318] (**) Option "XkbLayout" "us"
[ 479.319] (II) XINPUT: Adding extended input device "" (type: KEYBOARD)
[ 479.319] (II) XKB: Reusing cached keymap
[ 483.311] select returned 0
[ 483.323] select returned 0
[ 483.334] select returned 0
[ 483.347] select returned 0
[ 483.359] select returned 0
[ 483.371] select returned 0
[ 483.383] select returned 0
[ 483.396] select returned 0
[ 483.408] select returned 0
[ 483.420] select returned 0
[ 483.432] select returned 0
[ 483.445] select returned 0
[ 484.363] (II) UnloadModule: "mouse"
[ 484.363] (II) Unloading mouse
[ 484.363] (II) UnloadModule: "kbd"
[ 484.363] (II) Unloading kbd
[ 485.757] (II) intel(0): xf86UnbindGARTMemory: unbind key 8
[ 485.757] (II) intel(0): xf86UnbindGARTMemory: unbind key 9
[ 485.760] (II) intel(0): xf86UnbindGARTMemory: unbind key 10
[ 485.764] (II) intel(0): xf86UnbindGARTMemory: unbind key 11
[ 485.764] (WW) intel(0): drmDropMaster failed: Unknown error: 4294967295
Glyph corruption on T500
Been running it for a few days on a Thinkpad T500 and just started
seeing some odd glyph corruption - see https://lh5.googleusercontent.com/-7H1kbYsT0is/T328R9MkVUI/AAAAAAAAJIM/FAhih2jh7fc/s144/drmgem-glyph-corruption.png
No /dev/dri/card0 on the recent CURRENT (amd64)
Hello Gregoire,
A week ago (actually, after a year of inactivity) I've updated my system to CURRENT and today applied your patches. The kernel and patched system components have been built fine, but X does not start.
I am still using Intel GMA 4500. A year ago your patch has worked well :) I've done the procedure manually, and built Mesa & XvMC by hand (using the automatic script as a reference). Probably I've missed something?
dmesg:
May 20 12:54:34 vault /netbsd: Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
May 20 12:54:34 vault /netbsd: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
May 20 12:54:34 vault /netbsd: The NetBSD Foundation, Inc. All rights reserved.
May 20 12:54:34 vault /netbsd: Copyright (c) 1982, 1986, 1989, 1991, 1993
May 20 12:54:34 vault /netbsd: The Regents of the University of California. All rights reserved.
May 20 12:54:34 vault /netbsd:
May 20 12:54:34 vault /netbsd: NetBSD 6.99.19 (GENERIC) #0: Mon May 20 11:40:58 MSK 2013
May 20 12:54:34 vault /netbsd: dm@vault:/usr/obj/sys/arch/amd64/compile/GENERIC
May 20 12:54:34 vault /netbsd: total memory = 8157 MB
May 20 12:54:34 vault /netbsd: avail memory = 7904 MB
May 20 12:54:34 vault /netbsd: timecounter: Timecounters tick every 10.000 msec
May 20 12:54:34 vault /netbsd: timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
May 20 12:54:34 vault /netbsd: MSI MS-7592 (5.0)
May 20 12:54:34 vault /netbsd: mainbus0 (root)
May 20 12:54:34 vault /netbsd: cpu0 at mainbus0 apid 0: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz, id 0x1067a
May 20 12:54:34 vault /netbsd: cpu1 at mainbus0 apid 1: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz, id 0x1067a
May 20 12:54:34 vault /netbsd: ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
May 20 12:54:34 vault /netbsd: acpi0 at mainbus0: Intel ACPICA 20110623
May 20 12:54:34 vault /netbsd: acpi0: X/RSDT: OemId <7592MS,A7592400,20101101>, AslId <MSFT,00000097>
May 20 12:54:34 vault /netbsd: ACPI Warning: Incorrect checksum in table [OEMB] - 0x43, should be 0x3C (20110623/tbutils-282)
May 20 12:54:34 vault /netbsd: acpi0: SCI interrupting at int 9
May 20 12:54:34 vault /netbsd: timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
May 20 12:54:34 vault /netbsd: hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
May 20 12:54:34 vault /netbsd: timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
May 20 12:54:34 vault /netbsd: MCH (PNP0C01) at acpi0 not configured
May 20 12:54:34 vault /netbsd: attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
May 20 12:54:34 vault /netbsd: pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
May 20 12:54:34 vault /netbsd: midi0 at pcppi1: PC speaker
May 20 12:54:34 vault /netbsd: sysbeep0 at pcppi1
May 20 12:54:34 vault /netbsd: UAR1 (PNP0501) at acpi0 not configured
May 20 12:54:34 vault /netbsd: UAR2 (PNP0501) at acpi0 not configured
May 20 12:54:34 vault /netbsd: LPTE (PNP0400) at acpi0 not configured
May 20 12:54:34 vault /netbsd: RMSC (PNP0C02) at acpi0 not configured
May 20 12:54:34 vault /netbsd: FWH (INT0800) at acpi0 not configured
May 20 12:54:34 vault /netbsd: FWHE (PNP0C02) at acpi0 not configured
May 20 12:54:34 vault /netbsd: OMSC (PNP0C02) at acpi0 not configured
May 20 12:54:34 vault /netbsd: pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
May 20 12:54:34 vault /netbsd: SIOR (PNP0C02) at acpi0 not configured
May 20 12:54:34 vault /netbsd: PCIE (PNP0C02) at acpi0 not configured
May 20 12:54:34 vault /netbsd: RMEM (PNP0C01) at acpi0 not configured
May 20 12:54:34 vault /netbsd: acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
May 20 12:54:34 vault /netbsd: attimer1: attached to pcppi1
May 20 12:54:34 vault /netbsd: pckbd0 at pckbc1 (kbd slot)
May 20 12:54:34 vault /netbsd: pckbc1: using irq 1 for kbd slot
May 20 12:54:34 vault /netbsd: wskbd0 at pckbd0: console keyboard
May 20 12:54:34 vault /netbsd: pci0 at mainbus0 bus 0: configuration mode 1
May 20 12:54:34 vault /netbsd: pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
May 20 12:54:34 vault /netbsd: pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2e30 (rev. 0x03)
May 20 12:54:34 vault /netbsd: agp0 at pchb0: detected 32764k stolen memory
May 20 12:54:34 vault /netbsd: agp0: aperture at 0xd0000000, size 0x10000000
May 20 12:54:34 vault /netbsd: vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2e32 (rev. 0x03)
May 20 12:54:34 vault /netbsd: wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
May 20 12:54:34 vault /netbsd: wsmux1: connecting to wsdisplay0
May 20 12:54:34 vault /netbsd: inteldrm has not been converted to device_t
May 20 12:54:34 vault /netbsd: inteldrm0 at vga0: ioapic0 pin 16
May 20 12:54:34 vault /netbsd: drmdev has not been converted to device_t
May 20 12:54:34 vault /netbsd: drmdev0 at inteldrm0
May 20 12:54:34 vault /netbsd: hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
May 20 12:54:34 vault /netbsd: hdaudio0: interrupting at ioapic0 pin 16
May 20 12:54:34 vault /netbsd: hdafg0 at hdaudio0: VIA VT1708S
May 20 12:54:34 vault /netbsd: hdafg0: DAC00 6ch: Speaker [Jack], HP Out [Jack]
May 20 12:54:34 vault /netbsd: hdafg0: ADC01 2ch: CD [Built-In], Line In [Jack], Mic In [Jack]
May 20 12:54:34 vault /netbsd: hdafg0: DIG02 2ch: SPDIF Out [Jack]
May 20 12:54:34 vault /netbsd: hdafg0: 6ch/2ch 48000Hz PCM16*
May 20 12:54:34 vault /netbsd: audio0 at hdafg0: full duplex, playback, capture, independent
May 20 12:54:34 vault /netbsd: ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
May 20 12:54:34 vault /netbsd: ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
May 20 12:54:34 vault /netbsd: pci1 at ppb0 bus 1
May 20 12:54:34 vault /netbsd: pci1: i/o space, memory space enabled, rd/line, wr/inv ok
May 20 12:54:34 vault /netbsd: ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x01)
May 20 12:54:34 vault /netbsd: ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
May 20 12:54:34 vault /netbsd: pci2 at ppb1 bus 2
May 20 12:54:34 vault /netbsd: pci2: i/o space, memory space enabled, rd/line, wr/inv ok
May 20 12:54:34 vault /netbsd: alc0 at pci2 dev 0 function 0: Atheros AR8131 PCIe Gigabit Ethernet
May 20 12:54:34 vault /netbsd: alc0: interrupting at ioapic0 pin 17
May 20 12:54:34 vault /netbsd: alc0: Ethernet address 6c:62:6d:c2:29:fd
May 20 12:54:34 vault /netbsd: atphy0 at alc0 phy 0: L1 10/100/1000 PHY, rev. 11
May 20 12:54:34 vault /netbsd: atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
May 20 12:54:34 vault /netbsd: ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x01)
May 20 12:54:34 vault /netbsd: ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
May 20 12:54:34 vault /netbsd: pci3 at ppb2 bus 3
May 20 12:54:34 vault /netbsd: pci3: i/o space, memory space enabled, rd/line, wr/inv ok
May 20 12:54:34 vault /netbsd: uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
May 20 12:54:34 vault /netbsd: uhci0: interrupting at ioapic0 pin 23
May 20 12:54:34 vault /netbsd: usb0 at uhci0: USB revision 1.0
May 20 12:54:34 vault /netbsd: uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
May 20 12:54:34 vault /netbsd: uhci1: interrupting at ioapic0 pin 19
May 20 12:54:34 vault /netbsd: usb1 at uhci1: USB revision 1.0
May 20 12:54:34 vault /netbsd: uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
May 20 12:54:34 vault /netbsd: uhci2: interrupting at ioapic0 pin 18
May 20 12:54:34 vault /netbsd: usb2 at uhci2: USB revision 1.0
May 20 12:54:34 vault /netbsd: uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x01)
May 20 12:54:34 vault /netbsd: uhci3: interrupting at ioapic0 pin 16
May 20 12:54:34 vault /netbsd: usb3 at uhci3: USB revision 1.0
May 20 12:54:34 vault /netbsd: ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
May 20 12:54:34 vault /netbsd: ehci0: interrupting at ioapic0 pin 23
May 20 12:54:34 vault /netbsd: ehci0: EHCI version 1.0
May 20 12:54:34 vault /netbsd: ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
May 20 12:54:34 vault /netbsd: usb4 at ehci0: USB revision 2.0
May 20 12:54:34 vault /netbsd: ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
May 20 12:54:34 vault /netbsd: pci4 at ppb3 bus 4
May 20 12:54:34 vault /netbsd: pci4: i/o space, memory space enabled
May 20 12:54:34 vault /netbsd: rtk0 at pci4 dev 0 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
May 20 12:54:34 vault /netbsd: rtk0: interrupting at ioapic0 pin 16
May 20 12:54:34 vault /netbsd: rtk0: Ethernet address 00:e0:52:ca:e6:63
May 20 12:54:34 vault /netbsd: rlphy0 at rtk0 phy 7: Realtek internal PHY
May 20 12:54:34 vault /netbsd: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
May 20 12:54:34 vault /netbsd: ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b8 (rev. 0x01)
May 20 12:54:34 vault /netbsd: timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
May 20 12:54:34 vault /netbsd: ichlpcib0: 24-bit timer
May 20 12:54:34 vault /netbsd: ichlpcib0: TCO (watchdog) timer configured.
May 20 12:54:34 vault /netbsd: piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
May 20 12:54:34 vault /netbsd: piixide0: bus-master DMA support present
May 20 12:54:34 vault /netbsd: piixide0: primary channel configured to compatibility mode
May 20 12:54:34 vault /netbsd: piixide0: primary channel interrupting at ioapic0 pin 14
May 20 12:54:34 vault /netbsd: atabus0 at piixide0 channel 0
May 20 12:54:34 vault /netbsd: piixide0: secondary channel configured to compatibility mode
May 20 12:54:34 vault /netbsd: piixide0: secondary channel interrupting at ioapic0 pin 15
May 20 12:54:34 vault /netbsd: atabus1 at piixide0 channel 1
May 20 12:54:34 vault /netbsd: piixide1 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
May 20 12:54:34 vault /netbsd: piixide1: bus-master DMA support present
May 20 12:54:34 vault /netbsd: piixide1: primary channel configured to native-PCI mode
May 20 12:54:34 vault /netbsd: piixide1: using ioapic0 pin 19 for native-PCI interrupt
May 20 12:54:34 vault /netbsd: atabus2 at piixide1 channel 0
May 20 12:54:34 vault /netbsd: piixide1: secondary channel configured to native-PCI mode
May 20 12:54:34 vault /netbsd: atabus3 at piixide1 channel 1
May 20 12:54:34 vault /netbsd: ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
May 20 12:54:34 vault /netbsd: ichsmb0: interrupting at ioapic0 pin 19
May 20 12:54:34 vault /netbsd: iic0 at ichsmb0: I2C bus
May 20 12:54:34 vault /netbsd: isa0 at ichlpcib0
May 20 12:54:34 vault /netbsd: lpt0 at isa0 port 0x378-0x37b irq 7
May 20 12:54:34 vault /netbsd: com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
May 20 12:54:34 vault /netbsd: com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
May 20 12:54:34 vault /netbsd: acpicpu0 at cpu0: ACPI CPU
May 20 12:54:34 vault /netbsd: acpicpu0: C1: HLT, lat 0 us, pow 0 mW
May 20 12:54:34 vault /netbsd: acpicpu0: P0: FFH, lat 10 us, pow 89000 mW, 2803 MHz
May 20 12:54:34 vault /netbsd: acpicpu0: P1: FFH, lat 10 us, pow 77000 mW, 2403 MHz
May 20 12:54:34 vault /netbsd: acpicpu0: P2: FFH, lat 10 us, pow 66000 mW, 2003 MHz
May 20 12:54:34 vault /netbsd: acpicpu0: P3: FFH, lat 10 us, pow 55000 mW, 1603 MHz
May 20 12:54:34 vault /netbsd: acpicpu0: P4: FFH, lat 10 us, pow 46000 mW, 1203 MHz
May 20 12:54:34 vault /netbsd: coretemp0 at cpu0: thermal sensor, 1 C resolution
May 20 12:54:34 vault /netbsd: acpicpu1 at cpu1: ACPI CPU
May 20 12:54:34 vault /netbsd: coretemp1 at cpu1: thermal sensor, 1 C resolution
May 20 12:54:34 vault /netbsd: timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
May 20 12:54:34 vault /netbsd: uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
May 20 12:54:34 vault /netbsd: uhub0: 2 ports with 2 removable, self powered
May 20 12:54:34 vault /netbsd: uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
May 20 12:54:34 vault /netbsd: uhub1: 2 ports with 2 removable, self powered
May 20 12:54:34 vault /netbsd: uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
May 20 12:54:34 vault /netbsd: uhub2: 2 ports with 2 removable, self powered
May 20 12:54:34 vault /netbsd: uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
May 20 12:54:34 vault /netbsd: uhub3: 2 ports with 2 removable, self powered
May 20 12:54:34 vault /netbsd: uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
May 20 12:54:34 vault /netbsd: uhub4: 8 ports with 8 removable, self powered
May 20 12:54:34 vault /netbsd: ehci0: handing over full speed device on port 2 to uhci0
May 20 12:54:34 vault /netbsd: ehci0: handing over full speed device on port 4 to uhci1
May 20 12:54:34 vault /netbsd: wd0 at atabus0 drive 0
May 20 12:54:34 vault /netbsd: wd0: <ST3250820A>
May 20 12:54:34 vault /netbsd: wd0: drive supports 16-sector PIO transfers, LBA48 addressing
May 20 12:54:34 vault /netbsd: wd0: 232 GB, 484518 cyl, 16 head, 63 sec, 512 bytes/sect x 488395055 sectors
May 20 12:54:34 vault /netbsd: wd0: 32-bit data port
May 20 12:54:34 vault /netbsd: wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
May 20 12:54:34 vault /netbsd: wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
May 20 12:54:34 vault /netbsd: atapibus0 at atabus2: 2 targets
May 20 12:54:34 vault /netbsd: cd0 at atapibus0 drive 1: <PIONEER DVD-RW DVR-219L, KFQC221355WL, 1.02> cdrom removable
May 20 12:54:34 vault /netbsd: cd0: 32-bit data port
May 20 12:54:34 vault /netbsd: cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
May 20 12:54:34 vault /netbsd: wd1 at atabus2 drive 0
May 20 12:54:34 vault /netbsd: wd1: <ST500DM002-1BC142>
May 20 12:54:34 vault /netbsd: wd1: drive supports 16-sector PIO transfers, LBA48 addressing
May 20 12:54:34 vault /netbsd: wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
May 20 12:54:34 vault /netbsd: wd1: 32-bit data port
May 20 12:54:34 vault /netbsd: wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
May 20 12:54:34 vault /netbsd: wd1(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
May 20 12:54:34 vault /netbsd: cd0(piixide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
May 20 12:54:34 vault /netbsd: uhidev0 at uhub0 port 2 configuration 1 interface 0
May 20 12:54:34 vault /netbsd: uhidev0: Wacom Co.,Ltd. CTH-470, rev 2.00/1.00, addr 2, iclass 3/1
May 20 12:54:34 vault /netbsd: uhidev0: 192 report ids
May 20 12:54:34 vault /netbsd: ums0 at uhidev0 reportid 1: 5 buttons
May 20 12:54:34 vault /netbsd: wsmouse0 at ums0 mux 0
May 20 12:54:34 vault /netbsd: uhid0 at uhidev0 reportid 2: input=9, output=0, feature=1
May 20 12:54:34 vault /netbsd: uhid1 at uhidev0 reportid 3: input=0, output=0, feature=1
May 20 12:54:34 vault /netbsd: uhid2 at uhidev0 reportid 4: input=0, output=0, feature=1
May 20 12:54:34 vault /netbsd: uhid3 at uhidev0 reportid 5: input=0, output=0, feature=1
May 20 12:54:34 vault /netbsd: uhid4 at uhidev0 reportid 16: input=0, output=0, feature=2
May 20 12:54:34 vault /netbsd: uhid5 at uhidev0 reportid 17: input=0, output=0, feature=16
May 20 12:54:34 vault /netbsd: uhid6 at uhidev0 reportid 19: input=0, output=0, feature=1
May 20 12:54:34 vault /netbsd: uhid7 at uhidev0 reportid 20: input=0, output=0, feature=31
May 20 12:54:34 vault /netbsd: uhid8 at uhidev0 reportid 32: input=0, output=0, feature=1
May 20 12:54:34 vault /netbsd: uhid9 at uhidev0 reportid 33: input=0, output=0, feature=1
May 20 12:54:34 vault /netbsd: uhid10 at uhidev0 reportid 48: input=0, output=0, feature=31
May 20 12:54:34 vault /netbsd: uhid11 at uhidev0 reportid 49: input=0, output=0, feature=4
May 20 12:54:34 vault /netbsd: uhid12 at uhidev0 reportid 192: input=9, output=0, feature=0
May 20 12:54:34 vault /netbsd: uhidev1 at uhub0 port 2 configuration 1 interface 1
May 20 12:54:34 vault /netbsd: uhidev1: Wacom Co.,Ltd. CTH-470, rev 2.00/1.00, addr 2, iclass 3/0
May 20 12:54:34 vault /netbsd: uhidev1: 3 report ids
May 20 12:54:34 vault /netbsd: uhid13 at uhidev1 reportid 2: input=63, output=0, feature=0
May 20 12:54:34 vault /netbsd: uhid14 at uhidev1 reportid 3: input=63, output=0, feature=0
May 20 12:54:34 vault /netbsd: umass0 at uhub4 port 6 configuration 1 interface 0
May 20 12:54:34 vault /netbsd: umass0: Generic Mass Storage Device, rev 2.00/1.00, addr 2
May 20 12:54:34 vault /netbsd: umass0: using SCSI over Bulk-Only
May 20 12:54:34 vault /netbsd: scsibus0 at umass0: 2 targets, 4 luns per target
May 20 12:54:34 vault /netbsd: uhidev2 at uhub4 port 6 configuration 1 interface 1
May 20 12:54:34 vault /netbsd: sd0 at scsibus0 target 0 lun 0: <Generic-, SD/MMC, 1.00> disk removable
May 20 12:54:34 vault /netbsd: uhidev2: Generic Mass Storage Device, rev 2.00/1.00, addr 2, iclass 3/0
May 20 12:54:34 vault /netbsd: sd0: drive offline
May 20 12:54:34 vault /netbsd: uhidev2: 4 report ids
May 20 12:54:34 vault /netbsd: uhid15 at uhidev2 reportid 4: input=7, output=0, feature=0
May 20 12:54:34 vault /netbsd: sd0: unable to open device, error = 19
May 20 12:54:34 vault /netbsd: sd1 at scsibus0 target 0 lun 1: <Generic-, Compact Flash, 1.01> disk removable
May 20 12:54:34 vault /netbsd: sd1: drive offline
May 20 12:54:34 vault /netbsd: sd1: unable to open device, error = 19
May 20 12:54:34 vault /netbsd: sd2 at scsibus0 target 0 lun 2: <Generic-, SM/xD-Picture, 1.02> disk removable
May 20 12:54:34 vault /netbsd: sd2: drive offline
May 20 12:54:34 vault /netbsd: sd2: unable to open device, error = 19
May 20 12:54:34 vault /netbsd: sd3 at scsibus0 target 0 lun 3: <Generic-, MS/MS-Pro, 1.03> disk removable
May 20 12:54:34 vault /netbsd: sd3: drive offline
May 20 12:54:34 vault /netbsd: sd3: unable to open device, error = 19
May 20 12:54:34 vault /netbsd: Kernelized RAIDframe activated
May 20 12:54:34 vault /netbsd: pad0: outputs: 44100Hz, 16-bit, stereo
May 20 12:54:34 vault /netbsd: audio1 at pad0: half duplex, playback, capture
May 20 12:54:34 vault /netbsd: uhidev3 at uhub1 port 2 configuration 1 interface 0
May 20 12:54:34 vault /netbsd: uhidev3: Logitech USB Receiver, rev 2.00/12.01, addr 2, iclass 3/1
May 20 12:54:34 vault /netbsd: ukbd0 at uhidev3: 8 modifier keys, 6 key codes
May 20 12:54:34 vault /netbsd: boot device: wd0
May 20 12:54:34 vault /netbsd: root on wd0a dumps on wd0b
May 20 12:54:34 vault /netbsd: root file system type: ffs
May 20 12:54:34 vault /netbsd: wskbd1 at ukbd0 mux 1
May 20 12:54:34 vault /netbsd: wskbd1: connecting to wsdisplay0
May 20 12:54:34 vault /netbsd: uhidev4 at uhub1 port 2 configuration 1 interface 1
May 20 12:54:34 vault /netbsd: uhidev4: Logitech USB Receiver, rev 2.00/12.01, addr 2, iclass 3/1
May 20 12:54:34 vault /netbsd: uhidev4: 8 report ids
May 20 12:54:34 vault /netbsd: ums1 at uhidev4 reportid 2: 16 buttons, W and Z dirs
May 20 12:54:34 vault /netbsd: wsmouse1 at ums1 mux 0
May 20 12:54:34 vault /netbsd: uhid16 at uhidev4 reportid 3: input=4, output=0, feature=0
May 20 12:54:34 vault /netbsd: uhid17 at uhidev4 reportid 4: input=1, output=0, feature=0
May 20 12:54:34 vault /netbsd: uhid18 at uhidev4 reportid 8: input=1, output=0, feature=0
May 20 12:54:34 vault /netbsd: uhidev5 at uhub1 port 2 configuration 1 interface 2
May 20 12:54:34 vault /netbsd: uhidev5: Logitech USB Receiver, rev 2.00/12.01, addr 2, iclass 3/0
May 20 12:54:34 vault /netbsd: uhidev5: 33 report ids
May 20 12:54:34 vault /netbsd: uhid19 at uhidev5 reportid 16: input=6, output=6, feature=0
May 20 12:54:34 vault /netbsd: uhid20 at uhidev5 reportid 17: input=19, output=19, feature=0
May 20 12:54:34 vault /netbsd: uhid21 at uhidev5 reportid 32: input=14, output=14, feature=0
May 20 12:54:34 vault /netbsd: uhid22 at uhidev5 reportid 33: input=31, output=31, feature=0
May 20 12:54:35 vault savecore: no core dump
Xorg.0.log
[ 53.648]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 53.648] X Protocol Version 11, Revision 0
[ 53.648] Build Operating System: NetBSD/amd64 -
[ 53.648] Current Operating System: NetBSD vault 6.99.19 NetBSD 6.99.19 (GENERIC) #0: Mon May 20 11:40:58 MSK 2013 dm@vault:/usr/obj/sys/arch/amd64/compile/GENERIC amd64
[ 53.649] Build Date: 01 August 2011 01:01:00AM
[ 53.649]
[ 53.649] Current version of pixman: 0.23.2
[ 53.649] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 53.649] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 53.649] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 20 12:55:17 2013
[ 53.660] (II) Loader magic: 0x82fc60
[ 53.660] (II) Module ABI versions:
[ 53.660] X.Org ANSI C Emulation: 0.4
[ 53.660] X.Org Video Driver: 10.0
[ 53.660] X.Org XInput driver : 12.2
[ 53.660] X.Org Server Extension : 5.0
[ 53.673] (--) PCI:*(0:0:2:0) 8086:2e32:1462:7592 rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000cc00/8
[ 53.675] (==) Using default built-in configuration (12 lines)
[ 53.675] (==) --- Start of built-in configuration ---
[ 53.675] Section "Device"
[ 53.675] Identifier "Builtin Default intel Device 0"
[ 53.675] Driver "intel"
[ 53.675] EndSection
[ 53.675] Section "Screen"
[ 53.675] Identifier "Builtin Default intel Screen 0"
[ 53.675] Device "Builtin Default intel Device 0"
[ 53.675] EndSection
[ 53.675] Section "ServerLayout"
[ 53.675] Identifier "Builtin Default Layout"
[ 53.675] Screen "Builtin Default intel Screen 0"
[ 53.675] EndSection
[ 53.675] (==) --- End of built-in configuration ---
[ 53.675] (==) ServerLayout "Builtin Default Layout"
[ 53.675] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 53.675] (**) | |-->Monitor "<default monitor>"
[ 53.676] (**) | |-->Device "Builtin Default intel Device 0"
[ 53.676] (==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
[ 53.676] (==) Not automatically adding devices
[ 53.676] (==) Not automatically enabling devices
[ 53.719] (==) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 53.719] (==) ModulePath set to "/usr/X11R7/lib/modules"
[ 53.719] (==) |-->Input Device "<default pointer>"
[ 53.719] (==) |-->Input Device "<default keyboard>"
[ 53.719] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 53.720] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 53.720] (II) LoadModule: "extmod"
[ 53.732] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 53.739] (II) Module extmod: vendor="X.Org Foundation"
[ 53.739] compiled for 1.10.3, module version = 1.0.0
[ 53.739] Module class: X.Org Server Extension
[ 53.739] ABI class: X.Org Server Extension, version 5.0
[ 53.739] (II) Loading extension MIT-SCREEN-SAVER
[ 53.739] (II) Loading extension XFree86-VidModeExtension
[ 53.739] (II) Loading extension XFree86-DGA
[ 53.739] (II) Loading extension DPMS
[ 53.739] (II) Loading extension XVideo
[ 53.739] (II) Loading extension XVideo-MotionCompensation
[ 53.739] (II) Loading extension X-Resource
[ 53.739] (II) LoadModule: "dbe"
[ 53.740] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 53.751] (II) Module dbe: vendor="X.Org Foundation"
[ 53.751] compiled for 1.10.3, module version = 1.0.0
[ 53.751] Module class: X.Org Server Extension
[ 53.751] ABI class: X.Org Server Extension, version 5.0
[ 53.751] (II) Loading extension DOUBLE-BUFFER
[ 53.751] (II) LoadModule: "glx"
[ 53.752] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 53.763] (II) Module glx: vendor="X.Org Foundation"
[ 53.763] compiled for 1.10.3, module version = 1.0.0
[ 53.763] ABI class: X.Org Server Extension, version 5.0
[ 53.765] (==) AIGLX enabled
[ 53.765] (II) Loading extension GLX
[ 53.765] (II) LoadModule: "record"
[ 53.766] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 53.775] (II) Module record: vendor="X.Org Foundation"
[ 53.775] compiled for 1.10.3, module version = 1.13.0
[ 53.775] Module class: X.Org Server Extension
[ 53.775] ABI class: X.Org Server Extension, version 5.0
[ 53.775] (II) Loading extension RECORD
[ 53.775] (II) LoadModule: "dri"
[ 53.776] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 53.777] (II) Module dri: vendor="X.Org Foundation"
[ 53.786] compiled for 1.10.3, module version = 1.0.0
[ 53.786] ABI class: X.Org Server Extension, version 5.0
[ 53.787] (II) Loading extension XFree86-DRI
[ 53.787] (II) LoadModule: "dri2"
[ 53.788] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 53.791] (II) Module dri2: vendor="X.Org Foundation"
[ 53.791] compiled for 1.10.3, module version = 1.2.0
[ 53.792] ABI class: X.Org Server Extension, version 5.0
[ 53.792] (II) Loading extension DRI2
[ 53.792] (II) LoadModule: "intel"
[ 53.792] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 53.834] (II) Module intel: vendor="X.Org Foundation"
[ 53.834] compiled for 1.10.3, module version = 2.12.0
[ 53.834] Module class: X.Org Video Driver
[ 53.834] ABI class: X.Org Video Driver, version 10.0
[ 53.834] (II) LoadModule: "mouse"
[ 53.835] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 53.845] (II) Module mouse: vendor="X.Org Foundation"
[ 53.845] compiled for 1.10.3, module version = 1.7.1
[ 53.845] Module class: X.Org XInput Driver
[ 53.845] ABI class: X.Org XInput driver, version 12.2
[ 53.845] (II) LoadModule: "kbd"
[ 53.845] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 53.848] (II) Module kbd: vendor="X.Org Foundation"
[ 53.848] compiled for 1.10.3, module version = 1.6.0
[ 53.848] Module class: X.Org XInput Driver
[ 53.848] ABI class: X.Org XInput driver, version 12.2
[ 53.848] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2),
Ivybridge Server (GT1), Ivybridge Server (GT2)
[ 53.848] (--) Using wscons driver on /dev/ttyE0 in pcvt compatibility mode (version 3.32)
[ 53.848] (--) using VT number 1
[ 53.848] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 53.848] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 53.849] drmOpenDevice: node name is /dev/dri/card0
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 53.849] drmOpenDevice: node name is /dev/dri/card0
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card1
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card2
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card3
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card4
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card5
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card6
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card7
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card8
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card9
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card10
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card11
[ 53.849] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.849] drmOpenByBusid: drmOpenMinor returns -2
[ 53.849] drmOpenDevice: node name is /dev/dri/card12
[ 53.850] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.850] drmOpenByBusid: drmOpenMinor returns -2
[ 53.850] drmOpenDevice: node name is /dev/dri/card13
[ 53.850] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.850] drmOpenByBusid: drmOpenMinor returns -2
[ 53.850] drmOpenDevice: node name is /dev/dri/card14
[ 53.850] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.850] drmOpenByBusid: drmOpenMinor returns -2
[ 53.850] (II) Loading sub module "vgahw"
[ 53.850] (II) LoadModule: "vgahw"
[ 53.859] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 53.874] (II) Module vgahw: vendor="X.Org Foundation"
[ 53.874] compiled for 1.10.3, module version = 0.1.0
[ 53.874] ABI class: X.Org Video Driver, version 10.0
[ 53.874] (II) Loading sub module "ramdac"
[ 53.874] (II) LoadModule: "ramdac"
[ 53.874] (II) Module "ramdac" already built-in
[ 53.874] drmOpenDevice: node name is /dev/dri/card0
[ 53.874] drmOpenDevice: open result is -1, (No such file or directory)
[ 53.874] [drm] failed to load kernel module "i915"
[ 53.874] (EE) intel(0): [drm] Failed to open DRM device for pci:0000:00:02.0: No such file or directory
[ 53.874] (EE) intel(0): Failed to become DRM master.
[ 53.874] (II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
[ 53.874] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 53.874] (==) intel(0): RGB weight 888
[ 53.874] (==) intel(0): Default visual is TrueColor
[ 53.874] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41
[ 53.874] (--) intel(0): Chipset: "G41"
[ 53.874] (--) intel(0): Linear framebuffer at 0xD0000000
[ 53.874] (--) intel(0): IO registers at addr 0xFE400000 size 4194304
[ 53.874] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 53.874] (II) intel(0): No SDVO device is found in VBT
[ 53.879] (II) intel(0): 2 display pipes available.
[ 53.879] (II) Loading sub module "ddc"
[ 53.879] (II) LoadModule: "ddc"
[ 53.879] (II) Module "ddc" already built-in
[ 53.879] (II) Loading sub module "i2c"
[ 53.879] (II) LoadModule: "i2c"
[ 53.879] (II) Module "i2c" already built-in
[ 53.888] (II) intel(0): Output VGA has no monitor section
[ 53.888] (WW) intel(0): remove MTRR a0000 - b0000
[ 53.980] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[ 53.988] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
[ 54.037] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
[ 54.037] (II) intel(0): I2C bus "CRTDDC_A" removed.
[ 54.037] (II) intel(0): EDID for output VGA
[ 54.037] (II) intel(0): Manufacturer: DEL Model: f010 Serial#: 827930700
[ 54.037] (II) intel(0): Year: 2010 Week: 49
[ 54.037] (II) intel(0): EDID Version: 1.3
[ 54.037] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 54.037] (II) intel(0): Sync: Separate
[ 54.037] (II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 54.037] (II) intel(0): Gamma: 2.20
[ 54.037] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 54.037] (II) intel(0): Default color space is primary color space
[ 54.037] (II) intel(0): First detailed timing is preferred mode
[ 54.037] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 54.037] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 54.037] (II) intel(0): Supported established timings:
[ 54.037] (II) intel(0): 720x400@70Hz
[ 54.037] (II) intel(0): 640x480@60Hz
[ 54.037] (II) intel(0): 640x480@75Hz
[ 54.037] (II) intel(0): 800x600@60Hz
[ 54.037] (II) intel(0): 800x600@75Hz
[ 54.037] (II) intel(0): 1024x768@60Hz
[ 54.037] (II) intel(0): 1024x768@75Hz
[ 54.038] (II) intel(0): 1280x1024@75Hz
[ 54.038] (II) intel(0): Manufacturer's mask: 0
[ 54.038] (II) intel(0): Supported standard timings:
[ 54.038] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 54.038] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 54.038] (II) intel(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 54.038] (II) intel(0): Supported detailed timing:
[ 54.038] (II) intel(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 54.038] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 54.038] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 54.038] (II) intel(0): Serial No: H735H0BU1Y8L
[ 54.038] (II) intel(0): Monitor name: DELL 2209WA
[ 54.038] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[ 54.038] (II) intel(0): EDID (in hex):
[ 54.038] (II) intel(0): 00ffffffffffff0010ac10f04c385931
[ 54.038] (II) intel(0): 31140103682f1e782eee95a3544c9926
[ 54.038] (II) intel(0): 0f5054a54b00714f8180b30001010101
[ 54.038] (II) intel(0): 01010101010121399030621a274068b0
[ 54.038] (II) intel(0): 3600da281100001c000000ff00483733
[ 54.038] (II) intel(0): 35483042553159384c0a000000fc0044
[ 54.038] (II) intel(0): 454c4c203232303957410a20000000fd
[ 54.038] (II) intel(0): 00384b1e5310000a20202020202000d4
[ 54.038] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 54.043] (II) intel(0): Using EDID range info for horizontal sync
[ 54.043] (II) intel(0): Using EDID range info for vertical refresh
[ 54.043] (II) intel(0): Printing DDC gathered Modelines:
[ 54.043] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 54.043] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 54.043] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 54.043] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 54.043] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 54.043] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 54.043] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 54.043] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 54.043] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 54.043] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 54.043] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 54.043] (II) intel(0): EDID vendor "DEL", prod id 61456
[ 54.043] (II) intel(0): Printing probed modes for output VGA
[ 54.043] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 54.043] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 54.043] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 54.043] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 54.043] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 54.043] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 54.043] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 54.043] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 54.043] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 54.043] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 54.043] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 54.043] (II) intel(0): Output VGA connected
[ 54.043] (II) intel(0): Using exact sizes for initial modes
[ 54.043] (II) intel(0): Output VGA using initial mode 1680x1050
[ 54.043] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 54.562] (WW) intel(0): remove MTRR a0000 - b0000
[ 54.605] (II) intel(0): detected 512 kB GTT.
[ 54.605] (II) intel(0): detected 32764 kB stolen memory.
[ 54.605] (==) intel(0): video overlay key set to 0x101fe
[ 54.605] (**) intel(0): Display dimensions: (470, 300) mm
[ 54.605] (**) intel(0): DPI set to (90, 88)
[ 54.605] (II) Loading sub module "fb"
[ 54.605] (II) LoadModule: "fb"
[ 54.606] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 54.610] (II) Module fb: vendor="X.Org Foundation"
[ 54.610] compiled for 1.10.3, module version = 1.0.0
[ 54.610] ABI class: X.Org ANSI C Emulation, version 0.4
[ 54.610] (==) Depth 24 pixmap format is 32 bpp
[ 54.611] (II) intel(0): Kernel reported 1006592 total, 0 used
[ 54.611] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available
[ 54.611] (II) intel(0): [DRI2] Setup complete
[ 54.611] (II) intel(0): [DRI2] DRI driver: i965
[ 54.611] (**) intel(0): Framebuffer tiled
[ 54.611] (**) intel(0): Pixmaps tiled
[ 54.611] (**) intel(0): 3D buffers tiled
[ 54.611] (**) intel(0): SwapBuffers wait enabled
[ 54.655] no kernel exec fencing, wtf?(EE) intel(0): Failed to initialize kernel memory manager
[ 54.655] (EE) intel(0): Couldn't initialize video memory allocator
[ 54.655] (EE) intel(0): Couldn't allocate video memory
[ 54.655]
Fatal server error:
[ 54.655] AddScreen/ScreenInit failed for driver 0
[ 54.655]
[ 54.655]
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
[ 54.655] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 54.655]
NetBSD 6.1 compatibility
Hello,
This work is not compatible with NetBSD 6.1 release, is it? I failed to build it.
It builds just fine on NetBSD-current, but I wanted to use binary packages.
Thanks for your work
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.