keke1023 / padavan Goto Github PK
View Code? Open in Web Editor NEW基于hanwckf,chongshengB以及padavanonly的源码整合而来,支持7603/7615/7915的kvr
基于hanwckf,chongshengB以及padavanonly的源码整合而来,支持7603/7615/7915的kvr
大佬,jcg q20原厂uboot可以直接刷入吗?还是需要刷成CR660X的breed和pb boot再刷入?
使用科学上网时,CPU负载有时候会达到90%以上,整个网络会全部被卡死;如果关闭科学上网,CPU负载就不会出现90%以上的情况,什么情况?
trunk/user/rc/net.c 中,set_tcp_tweaks() 注释掉 sprintf(tmp, "/proc/sys/net/%s/%s", "ipv4", "tcp_tw_recycle"); fput_int(tmp, 1);
8天前编译还是正常的,今天编译突然不通过。
编译N次,好几个型号都是同样的报错内容:
curl: (92) HTTP/2 stream 1 was not closed cleanly: INTERNAL_ERROR (err 2)
Makefile:32: recipe for target 'go_build' failed
make[1]: Leaving directory '/opt/padavan/trunk/tools'
make[1]: *** [go_build] Error 92
make: *** [tools] Error 2
Makefile:177: recipe for target 'tools' failed
Error: Process completed with exit code 2.
貌似是执行语句的时候卡住没有下载成功
mkdir -p /opt/padavan/trunk/tools/go
( if [ ! -f /opt/padavan/trunk/tools/go/go1.16.6.linux-amd64.tar.gz ]; then
curl --create-dirs -L https://gomirrors.org/dl/go/go1.16.6.linux-amd64.tar.gz -o /opt/padavan/trunk/tools/go/go1.16.6.linux-amd64.tar.gz ;
fi )
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /opt/rt-n56u/trunk/libs/libusb-1.0/libusb-1.0.26/missing aclocal-1.16 -I m4
/opt/rt-n56u/trunk/libs/libusb-1.0/libusb-1.0.26/missing: line 81: aclocal-1.16: command not found
WARNING: 'aclocal-1.16' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
https://www.gnu.org/software/automake
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
https://www.gnu.org/software/autoconf
Makefile:427: recipe for target 'aclocal.m4' failed
https://www.gnu.org/software/m4/
https://www.perl.org/
make[3]: *** [aclocal.m4] Error 127
make[2]: *** [all] Error 2
make[1]: *** [all] Error 2
make: *** [libs_only] Error 2
make[3]: Leaving directory '/opt/rt-n56u/trunk/libs/libusb-1.0/libusb-1.0.26'
Makefile:6: recipe for target 'all' failed
make[2]: Leaving directory '/opt/rt-n56u/trunk/libs/libusb-1.0'
Makefile:227: recipe for target 'all' failed
make[1]: Leaving directory '/opt/rt-n56u/trunk/libs'
Makefile:202: recipe for target 'libs_only' failed
Error: Process completed with exit code 2.
只想编译专门做AP的固件,出厂就默认AP模式该怎么改啊
zerotier 无法使用, 网页管理界面一直不上线。
aria2的WEBUI下载页面打不开
编译SSR 出错,试过两台电脑了,都同样到SSR出错。
大佬有空看看。
the same configuration
make -j6 -C shadowsocksr-libev-master
make[3]: 进入目录“/home/cheng/Desktop/rt-n56u/trunk/user/shadowsocks/shadowsocksr-libev-master”
make[3]: *** 没有指明目标并且找不到 makefile。 停止。
make[3]: 离开目录“/home/cheng/Desktop/rt-n56u/trunk/user/shadowsocks/shadowsocksr-libev-master”
make[2]: *** [Makefile:13:all] 错误 2
make[2]: 离开目录“/home/cheng/Desktop/rt-n56u/trunk/user/shadowsocks”
make[1]: *** [Makefile:250:all] 错误 2
make[1]: 离开目录“/home/cheng/Desktop/rt-n56u/trunk/user”
make: *** [Makefile:202:user_only] 错误 2
我把7620/7612/7603的KVR打开了。在家里已经运行了2个多月了,可以成功漫游。
其中7620/7612支持KR
7603支持KVR,但是7603编译固件的时候打开KVR后2.4G总是不稳定(即使在管理界面关闭了KVR功能也一样),会突然变成20M频宽,甚至无法连接。试了很多方法都没有查到原因。
具体方法请参考我K1/K2/E8820S的源码:
https://github.com/sunnyguhz/Padavan
对github不熟悉,不知道怎么向你反向同步源码,只能给你留个言了。
configure: creating ./config.status
config.status: creating libusb-1.0.pc
config.status: creating Makefile
config.status: creating libusb/Makefile
config.status: creating examples/Makefile
config.status: creating tests/Makefile
config.status: creating doc/Makefile
config.status: creating doc/doxygen.cfg
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
make[3]: Leaving directory '/opt/rt-n56u/trunk/libs/libusb-1.0'
make -j2 -C libusb-1.0.25
make[3]: Entering directory '/opt/rt-n56u/trunk/libs/libusb-1.0/libusb-1.0.25'
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash '/opt/rt-n56u/trunk/libs/libusb-1.0/libusb-1.0.25/missing' aclocal-1.16 -I m4
/opt/rt-n56u/trunk/libs/libusb-1.0/libusb-1.0.25/missing: line 81: aclocal-1.16: command not found
WARNING: 'aclocal-1.16' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
Makefile:420: recipe for target 'aclocal.m4' failed
make[3]: Leaving directory '/opt/rt-n56u/trunk/libs/libusb-1.0/libusb-1.0.25'
Makefile:6: recipe for target 'all' failed
make[2]: Leaving directory '/opt/rt-n56u/trunk/libs/libusb-1.0'
https://www.gnu.org/software/automake
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
https://www.gnu.org/software/autoconf
Makefile:227: recipe for target 'all' failed
https://www.gnu.org/software/m4/
make[1]: Leaving directory '/opt/rt-n56u/trunk/libs'
https://www.perl.org/
make[3]: *** [aclocal.m4] Error 127
make[2]: *** [all] Error 2
make[1]: *** [all] Error 2
make: *** [libs_only] Error 2
Makefile:202: recipe for target 'libs_only' failed
libcurl源码压缩包原来是xz,现在变成gz了,Makefile没有对应修正。
padavanonly发现除了KVR的漫游方法以外,MTK无线芯片还可以通过MTKiappd漫游,MTKiappd支持MTK旗下所有芯片。看了一下,这块代码貌似没有更新。建议可以同步更新下。
CONFIG_WNM_SUPPORT
CONFIG_DOT11R_FT_SUPPORT is not set
CONFIG_DOT11K_RRM_SUPPORT is not set
CPU和内存位置显示正常
进程一个也不显示,
测试了几款7603的2.4G kvr存在问题
1、小米AC2100 2.4G MT7603EN
2、瑞斯达康2.4G MT7603EN
测试下来都没有kvr
科学上网这两种会不断地重启用其他的版本就没有问题多合一没有问题。使用的是github的云编译
大佬,定时重启确实无效呢,vb大佬也对比了代码跟chongb的一样,为啥不起作用呢,请求修复下呗!
基于作者的版本,制作了一个精简版的固件,其中对科学上网插件的DNS处有做优化,作者可以参考下融入进去
https://github.com/pmkol/Padavan-Newifi3
我叉的你的源码,诺基亚贝尔A-040W-Q设置了今天早上重启(周三上午7点),没起作用。之前在群里看到说用VB1980的其他群友也有说过定时重启无效这个事。希望可以排查一下
ssr是正常的,用v2软件显示已停止不能启动
大神,我在哪个文件可以看到你的源可以支持的插件清单
zerotier 1.65不能正常工作,已在多个固件中验证
高级设置_内网LAN_DHCP服务器_自定义配置文件dhcp.conf这个地方不起作用。我按照示例给一个设备指定了IP地址,重启过,重连过还是随机分配的。在下面的静态IP设置里设了就有效。
B70现在正常了没?KVR是不是OK了。
BELL-A-040W-Q这个路由器在系统管理-固件升级-产品型号这里显示的是“BELL-A-040W-”,少了个Q,导致在此界面升级固件的时候会提示固件不匹配,每次都需要进到breed里面去刷才行。
但是我有几次,貌似这个地方又是显示是对的。记不太清了。不知道哪里的问题导致的
经过查找是Target ProductID (board select, max 12 symbols)的问题,最大12字符,“BELL-A-040W-Q”刚好13个字符了。但是我不知道哪里能修改这个最大字符长度
May 20 16:25:55 kernel: HcGetEdca(): wdev=0, hobj is not ready!
一直重复出现
JDC
hanwckf有在4.4版本里提供方法,望更新:
hanwckf/padavan-4.4@ed67df5
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.