mate-desktop / mate-calc Goto Github PK
View Code? Open in Web Editor NEWCalculator for MATE
Home Page: http://www.mate-desktop.org
License: GNU General Public License v2.0
Calculator for MATE
Home Page: http://www.mate-desktop.org
License: GNU General Public License v2.0
mate-desktop ============= mate-desktop contains the libmate-desktop library, the mate-about program as well as some desktop-wide documents. The libmate-desktop library provides API shared by several applications on the desktop, but that cannot live in the platform for various reasons. There is no API or ABI guarantee, although we are doing our best to provide stability. Documentation for the API is available with gtk-doc. The mate-about program helps find which version of MATE is installed. You may download updates to the package from: http://pub.mate-desktop.org/releases/ Installation ============ If you are not using a released version of mate-desktop (for example, if you checked out the code from git), you first need to run './autogen.sh'. How to report bugs ================== Bugs should be reported to the MATE bug tracking system: https://github.com/mate-desktop/mate-desktop/issues
Expected behavior:
When the result is a negative number, I would expect the binary display to show an accurate representation of that number as stored by the computer. e.g. -47 should show up as 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1101 0001 on an x86-64 machine.
Alternately, though I think it would be far less useful for a programmer (though making some mathematicians happy), it could just display a signed binary number: -47 would be -101111.
Actual behavior:
Negative results show up as all 0s in the binary display.
Steps to reproduce the behavior:
Make sure it's set to Programming mode. Enter a negative number or calculation with a negative result.
MATE general version 1.22
Package version: 1.22.2-1
Linux Distribution: Manjaro x86-64
incorrect-fsf-address
HOW TO REPRODUCE:
RESULT:
its 15
it segfaults:
stacktrace when compiled with address sanitizer:
mp-convert.c:176:5: runtime error: null pointer passed as argument 1, which is declared to never be null
AddressSanitizer:DEADLYSIGNAL
=================================================================
==7216==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x7fe7b743db0d bp 0x7fe7adc53fb0 sp 0x7fe7adc53738 T6)
==7216==The signal is caused by a WRITE memory access.
==7216==Hint: address points to the zero page.
#0 0x7fe7b743db0c (/lib/x86_64-linux-gnu/libc.so.6+0x15cb0c)
#1 0x7fe7b90b8db5 (/lib/x86_64-linux-gnu/libasan.so.5+0xa8db5)
#2 0x555ae140bb3b in mp_set_from_integer /home/j/test/mate-calc/src/mp-convert.c:176
#3 0x555ae1409e39 in mp_bitwise /home/j/test/mate-calc/src/mp-binary.c:66
#4 0x555ae140a87f in mp_not /home/j/test/mate-calc/src/mp-binary.c:160
#5 0x555ae143a72d in pf_do_not /home/j/test/mate-calc/src/parserfunc.c:871
#6 0x555ae143d8f9 in p_parse /home/j/test/mate-calc/src/parser.c:276
#7 0x555ae1416eb0 in mp_equation_parse /home/j/test/mate-calc/src/mp-equation.c:308
#8 0x555ae13e1f5d in parse /home/j/test/mate-calc/src/math-equation.c:1184
#9 0x555ae13e23c6 in math_equation_solve_real /home/j/test/mate-calc/src/math-equation.c:1219
#10 0x7fe7b81de414 (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x76414)
#11 0x7fe7b74a9fa2 in start_thread /build/glibc-vjB4T1/glibc-2.28/nptl/pthread_create.c:486
#12 0x7fe7b73da4ce in clone (/lib/x86_64-linux-gnu/libc.so.6+0xf94ce)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV (/lib/x86_64-linux-gnu/libc.so.6+0x15cb0c)
Thread T6 created by T0 here:
#0 0x7fe7b9060db0 in __interceptor_pthread_create (/lib/x86_64-linux-gnu/libasan.so.5+0x50db0)
#1 0x7fe7b81ffc3f (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x97c3f)
==7216==ABORTING
type NOT and an large (>2**64
) integer value
1.20.3 or 1.23.0
1.20.3
debian unstable, ubuntu 18.04, compiled from source
When in Programming mode, gcalctool 5.28 allowed changing of base digits (bin, oct, dec, hex) with a keypress of Alt+{bodx). These corresponded with radio buttons underneath the number window.
There are also radio buttons for wordsize (64/32/16-bit) with shortcuts Alt+{631}.
In mate-calc 1.6.1 (and various other versions) the base digit selection has been changed to a dropdown with no keyboard shortcut. Wordsize is even further away in the Preferences menu.
Please consider adding Alt+{bodx) keyboard shortcuts to change base digits and wordsize. If you wished to revert to the radio buttons instead of the dropdown/Preferences, that would be ideal.
--- Want to back this issue? **[Post a bounty on it!](https://www.bountysource.com/issues/7652630-keyboard-shortcuts-for-base-digit-and-wordsize-changing?utm_campaign=plugin&utm_content=tracker%2F2163668&utm_medium=issues&utm_source=github)** We accept bounties via [Bountysource](https://www.bountysource.com/?utm_campaign=plugin&utm_content=tracker%2F2163668&utm_medium=issues&utm_source=github).Would be great to have an option to display exponents in results, especially for very large and very small numbers. Ideally there would also be an option to switch between scientific notation (arbitrary exponents) and engineering notation (exponent always a multiple of 3).
The display of exponents would solve issues like #25 and #26.
Want to back this issue? Post a bounty on it! We accept bounties via Bountysource.
Most actual: Increase plus button, change color and size of symbol.
Not changed significantly for a long time
Just UI of BASIC mode
1.18, 1.19
latest
any
Just try it
Release 20.04 LTS (Focal Fossa) 64-bit
Kernel Linux 5.4.0-37-generic x86_64
1.24.0
Default settings:
Number Format Automatic,
Showing 9 decimal places,
Angle units: Degrees,
Word size 64-bit
Mode Basic (same results in other modes)
Ubuntu 20.04 Mate
Verified wrong results on a second PC using a clean Ubuntu 20.04 in Virtualbox
Verified correct results on a third PC using mate-calc 1.20.1 on Ubuntu 18.04
Incorrect result for 2^(-55).
mate-calc result = 0
expected result = 2.7755575615628914e-17
Upon further investigation:
2^-30 results in 0.000000001
2^-31 results in 0
The + (plus sign) in AC_ARG_WITH([gtk+] causes issues. Looking at mate-terminal's configure.ac I suspect the + should be removed. Below is the error when I want to pass --with-gtk=2.0. If you need more info let me know.
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --disable-silent-rules --disable-dependency-tracking --with-gtk=2.0
configure: WARNING: unrecognized options: --with-gtk
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
I was working on code for fix deprecated functions call and i get in popup_button_menu
that is called by shift_left/right_cb
, and searched and can't found where shift_left/right_cb
is used, are they unused?
Hello
It appear that with mate-calc 1.8.0-0+qiana (i don't found the debian package...) I can't change accels in menu (for eaxample o remove F1 for Help).
Can mate-calc honor "can-change-accels" from dconf?
When I tried compute long term, Ive problem with displaying result. After typo many numbers with operations and push Enter to solve, result is out of text rectangle and cant be scrolled.
--- Want to back this issue? **[Post a bounty on it!](https://www.bountysource.com/issues/31414316-size-of-result-view?utm_campaign=plugin&utm_content=tracker%2F2163668&utm_medium=issues&utm_source=github)** We accept bounties via [Bountysource](https://www.bountysource.com/?utm_campaign=plugin&utm_content=tracker%2F2163668&utm_medium=issues&utm_source=github).atan(2) / 2 = 0.553574359
https://www.wolframalpha.com/input/?i=atan%282%29+%2F+2
atan(2) / 2 = 31.717474411
Enter atan(2) / 2
and hit Enter.
1.24.0
1.24.0-1
Arch Linux
In french the convention is to use , instead of . as a decimal separator. Please can you add support for both? Thanks!
Want to back this issue? Post a bounty on it! We accept bounties via Bountysource.
Code is perfect :D
No code is perfect :) Even here in mate
Download the code and check it with a static analyzer
I have no mate installed
Latest git upstream
Xubuntu 16.04
Line 391 in d0a089f
Line 1108 in d0a089f
Line 1572 in d0a089f
Line 706 in d0a089f
Lines 140 to 145 in d0a089f
result!=expected
Line 136 in d0a089f
mate-calc/src/test-mp-equation.c
Lines 190 to 197 in d0a089f
printf
here:Line 75 in d0a089f
puts
. The current code here is neither buggy nor vulnerable but it is potentially dangerous if someone decides to modify it in the future.The signal name should be 'response', not 'respones' in file math-window.c on line 225:
https://github.com/mate-desktop/mate-calc/blob/master/src/math-window.c#L225
Otherwise the close button does not work on message dialog that shown when yelp is not installed.
+ /usr/bin/make -O -j48 V=1 VERBOSE=1 check
Making check in po
make[1]: Nothing to be done for 'check'.
Making check in src
/usr/bin/make check-am
/usr/bin/make check-TESTS
make[4]: Entering directory '/home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src'
PASS: test-mp
make[4]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src'
make[4]: Entering directory '/home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src'
../test-driver: line 107: 2886970 Segmentation fault (core dumped) "$@" > $log_file 2>&1
FAIL: test-mp-equation
make[4]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src'
make[4]: Entering directory '/home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src'
==========================================
mate-calc 1.25.1: src/test-suite.log
==========================================
# TOTAL: 2
# PASS: 1
# SKIP: 0
# XFAIL: 0
# FAIL: 1
# XPASS: 0
# ERROR: 0
.. contents:: :depth: 2
FAIL: test-mp-equation
======================
FAIL test-mp-equation (exit status: 139)
============================================================================
Testsuite summary for mate-calc 1.25.1
============================================================================
# TOTAL: 2
# PASS: 1
# SKIP: 0
# XFAIL: 0
# FAIL: 1
# XPASS: 0
# ERROR: 0
============================================================================
See src/test-suite.log
Please report to https://github.com/mate-desktop/mate-calc/issues
============================================================================
make[4]: *** [Makefile:958: test-suite.log] Error 1
make[4]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src'
make[3]: *** [Makefile:1066: check-TESTS] Error 2
make[2]: *** [Makefile:1146: check-am] Error 2
make[1]: *** [Makefile:1148: check] Error 2
make: *** [Makefile:427: check-recursive] Error 1
[tkloczko@barrel SPECS]$ coredumpctl gdb 2886970
PID: 2886970 (test-mp-equatio)
UID: 1000 (tkloczko)
GID: 1000 (tkloczko)
Signal: 11 (SEGV)
Timestamp: Sun 2021-05-30 16:56:29 BST (5min ago)
Command Line: ./test-mp-equation
Executable: /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/test-mp-equation
Control Group: /user.slice/user-1000.slice/session-3664.scope
Unit: session-3664.scope
Slice: user-1000.slice
Session: 3664
Owner UID: 1000 (tkloczko)
Boot ID: bee09df31ca9472cae32a4cda486d4ec
Machine ID: d033f66b249a4ec09acfa81ac205554f
Hostname: barrel
Storage: /var/lib/systemd/coredump/core.test-mp-equatio.1000.bee09df31ca9472cae32a4cda486d4ec.2886970.1622390189000000.zst
Message: Process 2886970 (test-mp-equatio) of user 1000 dumped core.
Stack trace of thread 2886970:
#0 0x00007f3481e9b601 g_type_fundamental (libgobject-2.0.so.0 + 0x1c601)
#1 0x00007f3481eaec9e g_param_spec_enum (libgobject-2.0.so.0 + 0x2fc9e)
#2 0x0000561a0f2e1d83 n/a (/home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/test-mp-equation + 0xdd83)
GNU gdb (GDB) Fedora 9.0.50.20191119-2.fc32
Copyright (C) 2019 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-redhat-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/test-mp-equation...
warning: core file may not match specified executable file.
[New LWP 2886970]
Warning: couldn't activate thread debugging using libthread_db: Cannot find new threads: generic error
warning: File "/usr/lib64/libthread_db-1.0.so" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load:/usr/lib/golang/src/runtime/runtime-gdb.py".
To enable execution of this file add
add-auto-load-safe-path /usr/lib64/libthread_db-1.0.so
line to your configuration file "/home/tkloczko/.gdbinit".
To completely disable this security protection add
set auto-load safe-path /
line to your configuration file "/home/tkloczko/.gdbinit".
For more information about this security protection see the
"Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
info "(gdb)Auto-loading safe path"
warning: Unable to find libthread_db matching inferior's thread library, thread debugging will not be available.
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Core was generated by `./test-mp-equation'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00007f3481e9b601 in g_type_fundamental () from /lib64/libgobject-2.0.so.0
glib2-2.68.2-4.fc35.x86_64 glibc-2.33.9000-2.fc35.x86_64 gmp-6.2.1-2.3.fc35.x86_64 libblkid-2.37-0.2.rc2.fc35.x86_64 libffi-3.2.1-2.3.fc35.x86_64 libmount-2.37-0.2.rc2.fc35.x86_64 libmpc-1.2.1-3.fc35.x86_64 libselinux-3.2-2.fc35.x86_64 libxml2-2.9.12-5.fc35.x86_64 mpfr-4.1.0-8.fc35.x86_64 pcre2-10.36-5.fc35.x86_64 xz-libs-5.2.5-7.fc35.x86_64 zlib-1.2.11-27.fc35.x86_64
(gdb) bt full
Missing separate debuginfos, use: dnf debuginfo-install#0 0x00007f3481e9b601 in g_type_fundamental () at /lib64/libgobject-2.0.so.0
#1 0x00007f3481eaec9e in g_param_spec_enum () at /lib64/libgobject-2.0.so.0
#2 0x0000561a0f2e1d83 in mp_serializer_class_init (klass=<optimized out>) at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/mp-serializer.c:619
object_class = 0x561a0f551570
#3 mp_serializer_class_intern_init (klass=<optimized out>) at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/mp-serializer.c:45
#4 0x00007f3481eaccc7 in g_type_class_ref () at /lib64/libgobject-2.0.so.0
#5 0x00007f3481eba658 in g_object_new_with_properties () at /lib64/libgobject-2.0.so.0
#6 0x00007f3481ebaff1 in g_object_new () at /lib64/libgobject-2.0.so.0
#7 0x0000561a0f2e1bc2 in mp_serializer_new (format=MP_DISPLAY_FORMAT_AUTOMATIC, base=10, trailing_digits=2)
at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/mp-serializer.c:50
Python Exception <class 'gdb.error'> dwarf2_find_location_expression: Corrupted DWARF expression.:
#8 0x0000561a0f2e533d in unit_init (unit=0x561a0f541a80) at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/unit.c:209
#9 0x00007f3481ead08a in g_type_create_instance () at /lib64/libgobject-2.0.so.0
#10 0x00007f3481eba00d in g_object_new_internal () at /lib64/libgobject-2.0.so.0
#11 0x00007f3481eba51d in g_object_new_with_properties () at /lib64/libgobject-2.0.so.0
#12 0x00007f3481ebaff1 in g_object_new () at /lib64/libgobject-2.0.so.0
#13 0x0000561a0f2e22b0 in unit_new
(name=0x561a0f2eb864 "degree", display_name=0x561a0f2eb86b "Degrees", format=0x561a0f2eb873 "%s degrees", from_function=0x561a0f2eb87e "π*x/180", to_function=0x561a0f2eb887 "180x/π", symbols=0x561a0f2eb88f "degree,degrees,deg") at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/unit.c:30
unit = <optimized out>
symbol_names = <optimized out>
i = <optimized out>
#14 0x0000561a0f2e3953 in unit_manager_get_default () at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/unit-manager.c:120
category = 0x561a0f54e820
currencies = <optimized out>
iter = <optimized out>
i = 0
units =
{{category = 0x561a0f2eb85e "angle", name = 0x561a0f2eb864 "degree", display_name = 0x561a0f2eb86b "Degrees", format = 0x561a0f2eb873 "%s degrees", from_function = 0x561a0f2eb87e "π*x/180", to_function = 0x561a0f2eb887 "180x/π", symbols = 0x561a0f2eb88f "degree,degrees,deg"}, {category = 0x0, name = 0x561a0f2eb8c9 "radian", display_name = 0x561a0f2eb8a2 "Radians", format = 0x561a0f2eb8aa "%s radians", from_function = 0x561a0f2eb939 "x", to_function = 0x561a0f2eb939 "x", symbols = 0x561a0f2eb8b5 "radian,radians,rad"}, {category = 0x0, name = 0x561a0f2eb8c8 "gradian", display_name = 0x561a0f2eb8d0 "Gradians", format = 0x561a0f2eb8d9 "%s gradians", from_function = 0x561a0f2eb8e5 "π*x/200", to_function = 0x561a0f2eb8ee "200x/π", symbols = 0x561a0f2eb8f6 "gradian,gradians,grad"}, {category = 0x561a0f2eb90c "length", name = 0x561a0f2eb913 "parsec", display_name = 0x561a0f2eb91a "Parsecs", format = 0x561a0f2eb922 "%s pc", from_function = 0x561a0f2eb928 "30857", '0' <repeats 12 times>, "x", to_function = 0x561a0f2eb93b "x/30857", '0' <repeats 12 times>, symbols = 0x561a0f2eb94f "parsec,parsecs,pc"}, {category = 0x0, name = 0x561a0f2eb961 "lightyear", display_name = 0x561a0f2eb96b "Light Years", format = 0x561a0f2eb977 "%s ly", from_function = 0x561a0f2eb97d "9460730472580800x", to_function = 0x561a0f2eb98f "x/9460730472580800", symbols = 0x561a0f2eb9a2 "lightyear,lightyears,ly"}, {category = 0x0, name = 0x561a0f2eb9ba "astronomical-unit", display_name = 0x561a0f2eb9cc "Astronomical Units", format = 0x561a0f2eb9df "%s au", from_function = 0x561a0f2eb9e5 "149597870700x", to_function = 0x561a0f2eb9f3 "x/149597870700", symbols = 0x561a0f2eb9e2 "au"}, {category = 0x0, name = 0x561a0f2eba02 "nautical-mile", display_name = 0x561a0f2eba10 "Nautical Miles", format = 0x561a0f2eba1f "%s nmi", from_function = 0x561a0f2eba26 "1852x", to_function = 0x561a0f2eba2c "x/1852", symbols = 0x561a0f2eba22 "nmi"}, {category = 0x0, name = 0x561a0f2eba0b "mile", display_name = 0x561a0f2eba19 "Miles", format = 0x561a0f2eba33 "%s mi", from_function = 0x561a0f2eba39 "1609.344x", to_function = 0x561a0f2eba43 "x/1609.344", symbols = 0x561a0f2eba4e "mile,miles,mi"}, {category = 0x0, name = 0x561a0f2eba5c "kilometer", display_name = 0x561a0f2eba66 "Kilometers", format = 0x561a0f2eba71 "%s km", from_function = 0x561a0f2eba77 "1000x", to_function = 0x561a0f2eba7d "x/1000", symbols = 0x561a0f2eba84 "kilometer,kilometers,km,kms"}, {category = 0x0, name = 0x561a0f2ebaa0 "cable", display_name = 0x561a0f2ebaa6 "Cables", format = 0x561a0f2ebaad "%s cb", from_function = 0x561a0f2ebab3 "219.456x", to_function = 0x561a0f2ebabc "x/219.456", symbols = 0x561a0f2ebac6 "cable,cables,cb"}, {category = 0x0, name = 0x561a0f2ebad6 "fathom", display_name = 0x561a0f2ebadd "Fathoms", format = 0x561a0f2ebae5 "%s ftm", from_function = 0x561a0f2ebaec "1.8288x", to_function = 0x561a0f2ebaf4 "x/1.8288", symbols = 0x561a0f2ebafd "fathom,fathoms,ftm"}, {category = 0x0, name = 0x561a0f2ebdb0 "meter", display_name = 0x561a0f2ebdbc "Meters", format = 0x561a0f2ebb10 "%s m", from_function = 0x561a0f2eb939 "x", to_function = 0x561a0f2eb939 "x", symbols = 0x561a0f2ebb15 "meter,meters,m"}, {category = 0x0, name = 0x561a0f2ebb24 "yard", display_name = 0x561a0f2ebb29 "Yards", format = 0x561a0f2ebb2f "%s yd", from_function = 0x561a0f2ebb35 "0.9144x", to_function = 0x561a0f2ebb3d "x/0.9144", symbols = 0x561a0f2ebb46 "yard,yards,yd"}, {category = 0x0, name = 0x561a0f2ebb54 "foot", display_name = 0x561a0f2ebb59 "Feet", format = 0x561a0f2ebb5e "%s ft", from_function = 0x561a0f2ebb64 "0.3048x", to_function = 0x561a0f2ebb6c "x/0.3048", symbols = 0x561a0f2ebb75 "foot,feet,ft"}, {category = 0x0, name = 0x561a0f2ebb82 "inch", display_name = 0x561a0f2ebb87 "Inches", format = 0x561a0f2ebb8e "%s in", from_function = 0x561a0f2ebb94 "0.0254x", to_function = 0x561a0f2ebb9c "x/0.0254", symbols = 0x561a0f2ebba5 "inch,inches,in"}, {category = 0x0, name = 0x561a0f2ebd3e "centimeter", display_name = 0x561a0f2ebd50 "Centimeters", format = 0x561a0f2ebbb4 "%s cm", from_function = 0x561a0f2ebbba "x/100", to_function = 0x561a0f2ebbc0 "100x", symbols = 0x561a0f2ebbc5 "centimeter,centimeters,cm,cms"}, {category = 0x0, name = 0x561a0f2ebd73 "millimeter", display_name = 0x561a0f2ebd85 "Millimeters", format = 0x561a0f2ebbe3 "%s mm", from_function = 0x561a0f2eba7d "x/1000", to_function = 0x561a0f2eba77 "1000x", symbols = 0x561a0f2ebbe9 "millimeter,millimeters,mm"}, {category = 0x0, name = 0x561a0f2ebc03 "micrometer", display_name = 0x561a0f2ebc0e "Micrometers", format = 0x561a0f2ebc1a "%s μm", from_function = 0x561a0f2ebc21 "x/1000000", to_function = 0x561a0f2ebc2b "1000000x", symbols = 0x561a0f2ebc34 "micrometer,micrometers,um"}, {category = 0x0, name = 0x561a0f2ebc4e "nanometer", display_name = 0x561a0f2ebc58 "Nanomet--Type <RET> for more, q to quit, c to continue without paging--
ers", format = 0x561a0f2ebc63 "%s nm", from_function = 0x561a0f2ebc69 "x/1000000000", to_function = 0x561a0f2ebc76 "1000000000x", symbols = 0x561a0f2ebc82 "nanometer,nanometers,nm"}, {category = 0x561a0f2ebc9a "area", name = 0x561a0f2ebc9f "hectare", display_name = 0x561a0f2ebca7 "Hectares", format = 0x561a0f2ebcb0 "%s ha", from_function = 0x561a0f2ebcb6 "10000x", to_function = 0x561a0f2ebcbd "x/10000", symbols = 0x561a0f2ebcc5 "hectare,hectares,ha"}, {category = 0x0, name = 0x561a0f2ebcd9 "acre", display_name = 0x561a0f2ebcde "Acres", format = 0x561a0f2ebce4 "%s acres", from_function = 0x561a0f2ebced "4046.8564224x", to_function = 0x561a0f2ebcfb "x/4046.8564224", symbols = 0x561a0f2ebd0a "acre,acres"}, {category = 0x0, name = 0x561a0f2ebd15 "square-meter", display_name = 0x561a0f2ebd22 "Square Meters", format = 0x561a0f2ebd30 "%s m²", from_function = 0x561a0f2eb939 "x", to_function = 0x561a0f2eb939 "x", symbols = 0x561a0f2ebd33 "m²"}, {category = 0x0, name = 0x561a0f2ebd37 "square-centimeter", display_name = 0x561a0f2ebd49 "Square Centimeters", format = 0x561a0f2ebd5c "%s cm²", from_function = 0x561a0f2ebd64 "0.0001x", to_function = 0x561a0f2ebcb6 "10000x", symbols = 0x561a0f2ebd5f "cm²"}, {category = 0x0, name = 0x561a0f2ebd6c "square-millimeter", display_name = 0x561a0f2ebd7e "Square Millimeters", format = 0x561a0f2ebd91 "%s mm²", from_function = 0x561a0f2ebd99 "0.000001x", to_function = 0x561a0f2ebc2b "1000000x", symbols = 0x561a0f2ed30a "mm²"}, {category = 0x561a0f2ebda3 "volume", name = 0x561a0f2ebdaa "cubic-meter", display_name = 0x561a0f2ebdb6 "Cubic Meters", format = 0x561a0f2ebdc3 "%s m³", from_function = 0x561a0f2eba77 "1000x", to_function = 0x561a0f2eba7d "x/1000", symbols = 0x561a0f2ebdc6 "m³"}, {category = 0x0, name = 0x561a0f2ebdca "gallon", display_name = 0x561a0f2ebdd1 "Gallons", format = 0x561a0f2ebdd9 "%s gal", from_function = 0x561a0f2ebde0 "3.785412x", to_function = 0x561a0f2ebdea "x/3.785412", symbols = 0x561a0f2ebdf5 "gallon,gallons,gal"}, {category = 0x0, name = 0x561a0f2ebea5 "litre", display_name = 0x561a0f2ebe08 "Litres", format = 0x561a0f2ebe0f "%s L", from_function = 0x561a0f2eb939 "x", to_function = 0x561a0f2eb939 "x", symbols = 0x561a0f2ebe14 "litre,litres,liter,liters,L"}, {category = 0x0, name = 0x561a0f2ebe30 "quart", display_name = 0x561a0f2ebe36 "Quarts", format = 0x561a0f2ebe3d "%s qt", from_function = 0x561a0f2ebe43 "0.9463529x", to_function = 0x561a0f2ebe4e "x/0.9463529", symbols = 0x561a0f2ebe5a "quart,quarts,qt"}, {category = 0x0, name = 0x561a0f2ebe6a "pint", display_name = 0x561a0f2ebe6f "Pints", format = 0x561a0f2ebe75 "%s pt", from_function = 0x561a0f2ebe7b "0.4731765x", to_function = 0x561a0f2ebe86 "x/0.4731765", symbols = 0x561a0f2ebe92 "pint,pints,pt"}, {category = 0x0, name = 0x561a0f2ebea0 "millilitre", display_name = 0x561a0f2ebeab "Millilitres", format = 0x561a0f2ebeb7 "%s mL", from_function = 0x561a0f2ebebd "0.001x", to_function = 0x561a0f2eba77 "1000x", symbols = 0x561a0f2ebec4 "millilitre,millilitres,milliliter,milliliters,mL,cm³"}, {category = 0x0, name = 0x561a0f2ebefa "microlitre", display_name = 0x561a0f2ebf05 "Microlitres", format = 0x561a0f2ebf11 "%s μL", from_function = 0x561a0f2ebd99 "0.000001x", to_function = 0x561a0f2ebc2b "1000000x", symbols = 0x561a0f2ebf18 "mm³,μL,uL"}, {category = 0x561a0f2ebf24 "weight", name = 0x561a0f2ebf2b "tonne", display_name = 0x561a0f2ebf31 "Tonnes", format = 0x561a0f2ebf38 "%s T", from_function = 0x561a0f2eba77 "1000x", to_function = 0x561a0f2eba7d "x/1000", symbols = 0x561a0f2ebf3d "tonne,tonnes"}, {category = 0x0, name = 0x561a0f2ebf4a "kilograms", display_name = 0x561a0f2ebf54 "Kilograms", format = 0x561a0f2ebf5e "%s kg", from_function = 0x561a0f2eb939 "x", to_function = 0x561a0f2eb939 "x", symbols = 0x561a0f2ebf64 "kilogram,kilograms,kilogramme,kilogrammes,kg,kgs"}, {category = 0x0, name = 0x561a0f2eca23 "pound", display_name = 0x561a0f2ebf95 "Pounds", format = 0x561a0f2ebf9c "%s lb", from_function = 0x561a0f2ebfa2 "0.45359237x", to_function = 0x561a0f2ebfae "x/0.45359237", symbols = 0x561a0f2ebfbb "pound,pounds,lb"}, {category = 0x0, name = 0x561a0f2ebfcb "ounce", display_name = 0x561a0f2ebfd1 "Ounces", format = 0x561a0f2ebfd8 "%s oz", from_function = 0x561a0f2ebfde "0.02834952x", to_function = 0x561a0f2ebfea "x/0.02834952", symbols = 0x561a0f2ebff7 "ounce,ounces,oz"}, {category = 0x0, name = 0x561a0f2ec007 "gram", display_name = 0x561a0f2ec00c "Grams", format = 0x561a0f2ec012 "%s g", from_function = 0x561a0f2ebebd "0.001x", to_function = 0x561a0f2eba77 "1000x", symbols = 0x561a0f2ec017 "gram,grams,gramme,grammes,g"}, {category = 0x561a0f2ec033 "duration", name = 0x561a0f2eb966 "year", display_name = 0x561a0f2eb971 "Years", format = 0x561a0f2ec03c "%s years", from_function = 0x561a0f2ec045 "31557600x", to_function = 0x561a0f2ec04f "x/31557600", symbols = 0x561a0f2ec05a "year,years"}, {category = 0x0, name = 0x561a0f2ec065 "day", display_name = 0x561a0f2ec069 "Days", format = 0x561a0f2ec06e "%s days", from_function = 0x561a0f2ec076 "86400x", to_function = 0x561a0f2ec07d "x/86400", symbols = 0x561a0f2ec085 "day,days"}, {category = 0x0, name = 0x561a0f2ec08e "hour", display_name = 0x561a0f2ec093 "Hours", format = 0x561a0f2ec099 "%s hours", from_function = 0x561a0f2ec0a2 "3600x", to_function = 0x561a0f2ec0a8 "x/3600", symbols = 0x561a0f2ec0af "hour,hours"}, {category = 0x0, name = 0x561a0f2ec0ba "minute", display_name = 0x561a0f2ec0c1 "Minutes", format = 0x561a0f2ec0c9 "%s minutes", from_function = 0x561a0f2ec0d4 "60x", to_function = 0x561a0f2ec0d8 "x/60", symbols = 0x561a0f2ec0dd "minute,minutes"}, {category = 0x0, name = 0x561a0f2ec10f "second", display_name = 0x561a0f2ec0ec "Seconds", format = 0x561a0f2ec0f4 "%s s", from_function = 0x561a0f2eb939 "x", to_function = 0x561a0f2eb939 "x", symbols = 0x561a0f2ec0f9 "second,seconds,s"}, {category = 0x0, name = 0x561a0f2ec10a "millisecond", display_name = 0x561a0f2ec116 "Milliseconds", format = 0x561a0f2ec123 "%s ms", from_function = 0x561a0f2ebebd "0.001x", to_function = 0x561a0f2eba77 "1000x", symbols = 0x561a0f2ec129 "millisecond,milliseconds,ms"}, {category = 0x0, name = 0x561a0f2ec145 "microsecond", display_name = 0x561a0f2ec151 "Microseconds", format = 0x561a0f2ec15e "%s μs", from_function = 0x561a0f2ebd99 "0.000001x", to_function = 0x561a0f2ebc2b "1000000x", symbols = 0x561a0f2ec165 "microsecond,microseconds,us,μs"}, {category = 0x561a0f2ec185 "temperature", name = 0x561a0f2ec191 "degree-celcius", display_name = 0x561a0f2ec1a0 "Celsius", format = 0x561a0f2ec1a8 "%s ˚C", from_function = 0x561a0f2ec1af "x+273.15", to_function = 0x561a0f2ec1b8 "x-273.15", symbols = 0x561a0f2ec1c1 "degC,˚C"}, {category = 0x0, name = 0x561a0f2ec1ca "degree-farenheit", display_name = 0x561a0f2ec1db "Farenheit", format = 0x561a0f2ec1e5 "%s ˚F", from_function = 0x561a0f2ec1ec "(x+459.67)*5/9", to_function = 0x561a0f2ec1fb "x*9/5-459.67", symbols = 0x561a0f2ec208 "degF,˚F"}, {category = 0x0, name = 0x561a0f2ec211 "degree-kelvin", display_name = 0x561a0f2ec21f "Kelvin", format = 0x561a0f2ec226 "%s K", from_function = 0x561a0f2eb939 "x", to_function = 0x561a0f2eb939 "x", symbols = 0x561a0f2ec229 "K"}, {category = 0x0, name = 0x561a0f2ec22b "degree-rankine", display_name = 0x561a0f2ec23a "Rankine", format = 0x561a0f2ec242 "%s ˚R", from_function = 0x561a0f2ec249 "x*5/9", to_function = 0x561a0f2ec24f "x*9/5", symbols = 0x561a0f2ec255 "degR,˚R,˚Ra"}, {category = 0x0, name = 0x0, display_name = 0x0, format = 0x0, from_function = 0x0, to_function = 0x0, symbols = 0x0}}
#15 0x0000561a0f2e8830 in do_convert (x=0x7ffd1b285c58, x_units=0x561a0f54cf90 "gradians", z_units=0x561a0f54d100 "degrees", z=0x561a0f546be0, data=<optimized out>)
at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/test-mp-equation.c:120
#16 0x0000561a0f2e80a3 in pf_convert_number (self=0x561a0f546eb0) at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/parserfunc.c:78
Python Exception <class 'gdb.error'> dwarf2_find_location_expression: Corrupted DWARF expression.:
#17 0x0000561a0f2e7e33 in p_parse (state=0x561a0f54b740) at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/parser.c:276
ret = <optimized out>
token = <optimized out>
ans = <optimized out>
ret = <optimized out>
Python Exception <class 'gdb.error'> dwarf2_find_location_expression: Corrupted DWARF expression.:
#18 mp_equation_parse (expression=<optimized out>, options=0x561a0f2f40e0 <options>, result=0x7ffd1b285d98, error_token=0x7ffd1b285d90)
at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/mp-equation.c:313
ret = <optimized out>
Python Exception <class 'gdb.error'> dwarf2_find_location_expression: Corrupted DWARF expression.:
--Type <RET> for more, q to quit, c to continue without paging--
#19 0x0000561a0f2e9611 in Test (expression=0x561a0f2ed2c1 "100 gradians in degrees", expected=0x561a0f2ede95 "90", expected_error=0, trailing_digits=9)
at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/test-mp-equation.c:83
error = <optimized out>
error_token = 0x0
result =
{num = {{re = {{_mpfr_prec = 1000, _mpfr_sign = 1, _mpfr_exp = -9223372036854775806, _mpfr_d = 0x561a0f547ec8}}, im = {{_mpfr_prec = 1000, _mpfr_sign = 1, _mpfr_exp = -9223372036854775806, _mpfr_d = 0x561a0f547a98}}}}}
#20 0x0000561a0f2dd5ec in test_conversions () at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/test-mp-equation.c:135
#21 main () at /home/tkloczko/rpmbuild/BUILD/mate-calc-1.25.1/src/test-mp-equation.c:690
Please let me know if you will need more details.
When I check "Show thousands separators" checkbox in mate-calc I do not see any changes in work. All numbers are displayed without separators. I use Mate 1.4.0 (latest version) on Ubuntu 12.04.
need schemas install on archlinux script
Wasn't sure where to put this but I just read that mate-calc is going away and will be replaced with Galculator in mate-desktop 1.10. I have made use of the programming and financial functions in mate-calc. Galculator lacks those features, so this basically amounts to a feature loss in mate-desktop 1.10, which will become an issue in the near future. Or, will the code for these functions be added to the codebase of Galculator to integrate those features into Galculator? Please advise.
Ability to hide menu
Regarding UI
Having a history panel where you could go back to old equations or copy the expression/result would be super handy. An idea for implementation could be like the this example (http://www.eeweb.com/toolbox/calculator)
--- Want to back this issue? **[Post a bounty on it!](https://www.bountysource.com/issues/29684942-feature-request-history-panel?utm_campaign=plugin&utm_content=tracker%2F2163668&utm_medium=issues&utm_source=github)** We accept bounties via [Bountysource](https://www.bountysource.com/?utm_campaign=plugin&utm_content=tracker%2F2163668&utm_medium=issues&utm_source=github).e^iπ+1=0
e^iπ+1=
(Blank)
Enter e^iπ+1
1.20.4
1.20.3 & in master
Debian buster
none
no warnings running in terminal
I see in terminal:
$ mate-calc
(process:20851): GLib-GObject-CRITICAL **: g_param_spec_boxed: assertion 'G_TYPE_IS_BOXED (boxed_type)' failed
(process:20851): GLib-GObject-CRITICAL **: validate_pspec_to_install: assertion 'G_IS_PARAM_SPEC (pspec)' failed
(process:20851): GLib-GObject-CRITICAL **: g_param_spec_boxed: assertion 'G_TYPE_IS_BOXED (boxed_type)' failed
(process:20851): GLib-GObject-CRITICAL **: validate_pspec_to_install: assertion 'G_IS_PARAM_SPEC (pspec)' failed
(process:20851): GLib-GObject-CRITICAL **: g_param_spec_boxed: assertion 'G_TYPE_IS_BOXED (boxed_type)' failed
(process:20851): GLib-GObject-CRITICAL **: validate_pspec_to_install: assertion 'G_IS_PARAM_SPEC (pspec)' failed
1.18.0
mate-calc 1.18.1 and git master
debian testing
πi
It calculates forever.
It seems to be an infinite loop. Probably somewhere in mp.c where ln() is defined.
1.20.1
1.22.0
Ubuntu Mate 18.04
Arcsin, Arccos and Arctan are not included in the advanced calculator. Please add them!
Average (close to none) CPU consumption when using the calculator.
Once I do any calculation the CPU usage spikes to 100% or very close to that percentage.
Type any calculation (at times not even a calculation, just numbers). It's irrelevant the type of calculation for what I have tested.
Example:
2+2+1
That'll do the work, 80 to 100% just for doing that. And the CPU usage keeps like that for about 10 seconds after the calculation.
MATE 1.20.1
1.20.1
Ubuntu-Mate 18.04.4 LTS (Bionic Beaver) 64-bit
n/a
no warnings
Warnings when opening in financial mode.
[rave@mother ~]$ mate-calc
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Chinese yuan'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Japanese yen'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'U.K. pound'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'U.S. dollar'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Algerian dinar'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Australian dollar'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Brazilian real'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Brunei dollar'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Canadian dollar'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Chilean peso'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Colombian peso'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Czech koruna'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Danish krone'
** (mate-calc:32185): WARNING **: 11:42:56.197: Unknown currency 'Indian rupee'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Israeli New Shekel'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Korean won'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Kuwaiti dinar'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Malaysian ringgit'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Mauritian rupee'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Mexican peso'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'New Zealand dollar'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Norwegian krone'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Omani rial'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Peruvian sol'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Philippine peso'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Polish zloty'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Qatari riyal'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Russian ruble'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Saudi Arabian riyal'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Singapore dollar'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'South African rand'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Swedish krona'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Swiss franc'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Thai baht'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Trinidadian dollar'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'U.A.E. dirham'
** (mate-calc:32185): WARNING **: 11:42:56.198: Unknown currency 'Uruguayan peso'
Note , i see that warnings since the project started.
1.22.1
1.22.0
Fedora
I don't file out reports against myself ;)
(535^125x125^854) mod 1283 = 756
(535^125x125^854) mod 1283 = 7.31869466x10^1830
Enter (535^125x125^854) mod 1283
To verify the correct result in python console enter:
>>> 535**125*125**854 % 1283
756
1.20
master
debian 10
none
In Debian, the .appdata.xml (apspstream) file goes into /usr/share/metainfo.
See here for the workaround, I currently have in debian/rules:
https://anonscm.debian.org/cgit/pkg-mate/mate-calc.git/commit/?id=b54b03e9ddf3fdff24b7e079e13bd1efa416e21d
Input:
6*cos(45) +1
Correct answer is 5.2426406... (assuming working in degrees)
6cos(45) +1
yields:
10,242640687
However, this is the correct answer for
6(cos(45)+1)
(in degrees), so clearly there are problems with calculation order here. Similar errors occur for 6*cos(45)+sin(45) (which gives a number over 8, clearly wrong as the absolute value of both sine and cosine is less than or equal to 1)
Just typing it in to the calculator.
1.24.0
1.24.0-1
Xubuntu 20.04.1 LTS (Focal Fossa)
The last update of gcalc requires glib >= 2.31; Is it possible to extend support to glib 2.30 which should still be around in many system ?
mate-calc
has spaces between the buttons, like gnome-calculator
:
No spaces between the buttons in many themes, e.g.
BlackMATE:
Arc:
Materia:
Please note that a few themes like Menta already have spaces because they use border-image
instead of border
for the button spacing.
Change the theme.
1.20.1
1.20.1
Ubuntu 18.04
This was originally reported here: nana-4/materia-theme#237
Prime factorization is displayed in history view
it isn't
enable history-view (view->history), enter a number, hit ctrl+f, factorization will not be shown in the history-view widget
1.20
master
debian 10
none
src/mp.h requires mpc.h, but this header not checked by configure.
mpfr not depends on mpc, so this I think, checking for mpc.h is required.
This while using some fonts as system font (like Noto Sans), but not with others (like Liberation Sans) .
Not any other application shows the behavior, including Pluma. They all show the symbols.
The maximum settable number of decimal places is 9. Any number smaller than 5e-10 is truncated to 0 in the display, although the correct value is held internally (confirm by multiplying the '0' result so that the new result will be > 5e-10).
As numbers less than 5e-10 occur regularly in calculations it would be good to allow an increase in the number of decimal places to be displayed.
From a quick check the 'accuracy' range needs to be changed in the file:
data/org.mate.calc.gschema.xml.in
(but is that all???)
Want to back this issue? Post a bounty on it! We accept bounties via Bountysource.
mate-calc result = 0
expected result = 1e-10
mp-convert.c:487:43: warning: using integer absolute value function 'abs' when argument is of floating point type [-Wabsolute-value]
if (ret_val <= 0. ||
((d__1 = (double) ((float) x->exponent) - (log(ret_val) / log((double)
((float) MP_BASE)) + .5), abs(d__1)) > .6)) {
Maybe
if (ret_val <= 0. ||
((d__1 = (double) ((float) x->exponent) - (log(ret_val) / log((double)
((float) MP_BASE)) + .5), fabs(d__1)) > .6)) {
mate-calc-1.21:
Error loading button UI: /usr/share/mate-calc/buttons-programming.ui:38:41 Object with ID image1 not found
The History View should locate above the entry box and be designed to show previous calculations in the form of a scrollable list that can be clicked and scrolled through using a mouse or even navigated and selected using the arrow keys on a keyboard.
Once an entry has been selected, it will immediately show up in the entry box for to manipulate and use.
Finally, there is no upper limit on the number of calculations that can show up in the list for use.
We can only access history in the MATE Calculator using the kayboard shortcut Undo command (Ctrl+Z)
Open MATE Calculator and do some calculations.
mate-calc 1.20.3
Debian 10.1
-ln(x) is parsed as ln(-1)+ln(x) (somehow), leading silly ludicrous
result such as −ln(1) = πi, or −ln(2) ≈ 0,693147181 + πi.
Viewing old results of earlier calculation with scrolling multi line. Old results are Non-editable.
ln(1/2) should output -ln(2) which is about -0.693
Gives error message: ERROR OCCURRED IN MP_LNS, NEWTON ITERATION NOT CONVERGING PROPERLY
Just type into the app
1.24
1.24-1
Xubuntu LTS 20.04
All modes should work, all features should work.
Only BASIC mode works and only in Landscape mode, on the Librem 5 phone. On Pinephone and others it will probably be the same issue. I wrote up how I was able to fix this type of issue on a posting here: https://howtotrainyourrobot.com/building-an-amateur-radio-app-for-librem-phone-part-3/
Install MATE calculator. Try different modes.
Mate-calc 1.20.3
Mate-calc 1.20.3
PureOS
No warning messages.
Warning-message:
(mate-calc:3881): GLib-GIO-WARNING **: 22:58:34.261: g_settings_set_value: value for key 'accuracy' in schema 'org.mate.calc' is outside of valid range
I noticed the above message in mate-calc when run from command line and setting the decimal places greater than 9 in preferences dialog. Most certainly caused by #86.
mate-calc git master
locally compiled
UM 18.04
All combobox menus open over their buttons
If a combobox is opened in financial mode and the mode then switched to advanced mode, comboboxes can open in arbitrary locations detached from their buttons. See #55 (comment)
and video posted there
https://www.dropbox.com/s/jf8axx21u4xlhi3/mate-calc.ogv.tar.xz?dl=0
Open mate-calc and switch to financial mode. Click on one of the two comboboxes. Now switch to Advanced mode and click on the same combobox, which now has a new label but about the same position. The menu opens in the wrong place.
1.21/1.20 mix from git master
locally compiled
Debian Unstable
None as this is a local build
Dropdown entry shows "Volumen"
Dropdown entry shows "Datenträger"
1.22.1
1.22.1-1
Manjaro Linux
The dropdown menu for converting units has a wrong machine translation in German. I guess the English original would be volumes for cubic units (m³, litre...) which would be Volumen
or Volumina
in German - but this was translated according to the meaning of hard-disks, DVDs etc. which is Datenträger
(data carrier) in German.
Unfortunately the group for mate-calc is closed on transiflex and I'm unable to comment there.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.