sparkfun / papa_soundie_audio_player Goto Github PK

please omit any of the issues listed if they are intentional deviations from the checklist

(1) "J6" and "J9" headers are 50mil off from being bread-board compatible

(2) Bottom "A1" silk label isn’t lined up properly. The “Audio player” silk on the top of the board is not lined up evenly. Some of the labels on the “J3","J7", "J8", and "J12” headers are not lined up similarly.

(3) "VLSI RDY" silk is 20% ratio

(4) Measures has a couple extra measurement points near the top left of the board

I cannot add Papa_Soundie_Audio_Player Library to Arduino IDE. When I try I get an error.
"Specified folder/zip file does not contain a valid library"

Arduino: 1.8.5 (Windows 10), Board: "Arduino Due (Programming Port)"

I am at a loss as to why this error pops up except there must be something wrong with the file.

SCH:
(1) the version number on sheet 1 of the SCH shows "v01" and page 2 shows "v02"

SCH and BRD:
(2) in the "decoupling" portion of the SCH, the AVDD symbol is connected to a trace named "VCC". Guessing that the 10uf cap will have to be moved closer to the VS (BRD) once the 10uf cap is connected to the VS.

BOM:
(3) the BOM needs one more 10K added to it... also, it looks like one of the 10K resistors is a different package than the other two.