sparkfun / qduino_mini_sfe Goto Github PK

I am not able to get my 3.7V 2000mAh patter to charge on my Qduino. I'm brand new to DIY electronics, so may be missing something. I plugged in board to usb and plugged the battery into the board and left it over night. It is still at 0% when I check it with qduino FuelGage program, and the battery doesn't power the board on its own. Is there a way I can do a factory reset or update firmware to see if thats the issue?

Just to avoid any confusion since we have proto PCBs in bound with v12 in the copper.

"+" and "-" silk labels on jst could be better aligned

We saw a 10% error rate during the kickstarter fulfillment on that IC alone. Part of the problem is the tStop on the package as it exposes way more metal than necessary. We should tighten the tStop up as mush as possible, reduce all pad lands for the IC leads to 75% paste and reduce the center pad to 50% paste.

Brent, would you prefer that I work with Bob to accomplish this or would you like to tackle it?