Issue with deepsleep about sonoff-tasmota HOT 5 CLOSED

set teleperiod 10
This causes a direct measure after wakeup. deepsleep will only happen after successfull measurment.

keep me posted.

from sonoff-tasmota.

OK, tried that:
11:45:40 MQT: stat/sonoffAkku/RESULT = {"TelePeriod":"10"}
11:45:41 MQT: tele/sonoffAkku/STATE = {"Time":"2018-03-26T11:45:41","Uptime":"0T00:00:17","Vcc":2.984, "Wifi":{"AP":1, "SSId":"hs.net_EG", "RSSI":58, "APMac":"9C:C7:A6:F7:72:A2"}, "DeepSleep":10, "Heap":22672}
11:45:41 MQT: tele/sonoffAkku/SENSOR = {"Time":"2018-03-26T11:45:41","Distanz":70.21}
11:45:51 MQT: tele/sonoffAkku/STATE = {"Time":"2018-03-26T11:45:51","Uptime":"0T00:00:27","Vcc":2.983, "Wifi":{"AP":1, "SSId":"hs.net_EG", "RSSI":60, "APMac":"9C:C7:A6:F7:72:A2"}, "DeepSleep":10, "Heap":22744}
11:45:52 MQT: tele/sonoffAkku/SENSOR = {"Time":"2018-03-26T11:45:51","Distanz":70.22}
11:46:02 MQT: tele/sonoffAkku/STATE = {"Time":"2018-03-26T11:46:02","Uptime":"0T00:00:38","Vcc":2.982, "Wifi":{"AP":1, "SSId":"hs.net_EG", "RSSI":60, "APMac":"9C:C7:A6:F7:72:A2"}, "DeepSleep":10, "Heap":22744}
11:46:02 MQT: tele/sonoffAkku/SENSOR = {"Time":"2018-03-26T11:46:02","Distanz":70.32}
11:46:05 CMD: deepsleep 15
11:46:05 MQT: stat/sonoffAkku/RESULT = {"DeepSleep":"15 (15)"}

Device has gone to sleep after measurement but didn't wake up...

from sonoff-tasmota.

You need to wire the RST pin with the D0 pin . Take a look at google to get more info

from sonoff-tasmota.

Please close the issue, if fixed.

from sonoff-tasmota.

It's working with RST to D0 wire

from sonoff-tasmota.