Twitter Snowflake-alike ID generator for .Net. Available as Nuget package

In certain situations you need a low-latency uncoordinated, (roughly) time ordered, compact and highly available Id generation system. This project was inspired by Twitter's Snowflake project which has been retired. Note that this project was inspired by Snowflake but is not an exact implementation. This library provides a basis for Id generation; it does not provide a service for handing out these Id's nor does it provide generator-id ('worker-id') coordination.

IdGen generates, like Snowflake, 64 bit Id's. The Sign Bit is unused since this can cause incorrect ordering on some systems that cannot use unsigned types and/or make it hard to get correct ordering. So, in effect, IdGen generates 63 bit Id's. An Id consists of 3 parts:

• Timestamp
• Generator-id
• Sequence

An Id generated with a Default MaskConfig is structured as follows:

However, using the MaskConfig class you can tune the structure of the created Id's to your own needs; you can use 45 bits for the timestamp, 2 bits for the generator-id and 16 bits for the sequence if you prefer. As long as all 3 parts (timestamp, generator and sequence) add up to 63 bits you're good to go!

The timestamp-part of the Id should speak for itself; by default this is incremented every millisecond and represents the number of milliseconds since a certain epoch. However, IdGen relies on an ITimeSource which uses a 'tick' that can be defined to be anything; be it a millisecond (default), a second or even a day or nanosecond (hardware support etc. permitting). By default IdGen uses 2015-01-01 0:00:00Z as epoch, but you can specify a custom epoch too.

The generator-id-part of the Id is the part that you 'configure'; it could correspond to a host, thread, datacenter or continent: it's up to you. However, the generator-id should be unique in the system: if you have several hosts or threads generating Id's, each host or thread should have it's own generator-id. This could be based on the hostname, a config-file value or even be retrieved from an coordinating service. Remember: a generator-id should be unique within the entire system to avoid collisions!

The sequence-part is simply a value that is incremented each time a new Id is generated within the same tick (again, by default, a millisecond but can be anything); it is reset every time the tick changes.

We recommend you use NTP to keep your system clock accurate. IdGen protects from non-monotonic clocks, i.e. clocks that run backwards. The DefaultTimeSource relies on a 64bit monotonic, increasing only, system counter. However, we still recommend you use NTP to keep your system clock accurate; this will prevent duplicate Id's between system restarts for example.

The DefaultTimeSource relies on a Stopwatch for calculating the 'ticks' but you can implement your own time source by simply implementing the ITimeSource interface.

Install the Nuget package and write the following code:

using IdGen;
using System.Linq;

class Program
{
    static void Main(string[] args)
    {
        var generator = new IdGenerator(0);
        var id = generator.CreateId();
    }
}

Voila. You have created your first Id! Want to create 100 Id's? Instead of:

var id = generator.CreateId();

write:

var id = generator.Take(100);

This is because the IdGenerator() implements IEnumerable providing you with a never-ending stream of Id's (so you might want to be careful doing a .Select(...) or Count() on it!).

The above example creates a default IdGenerator with the GeneratorId (or: 'Worker Id') set to 0 and using a DefaultTimeSource. If you're using multiple generators (across machines or in separate threads or...) you'll want to make sure each generator is assigned it's own unique Id. One way of doing this is by simply storing a value in your configuration file for example, another way may involve a service handing out GeneratorId's to machines/threads. IdGen does not provide a solution for this since each project or setup may have different requirements or infrastructure to provide these generator-id's.

The below sample is a bit more complicated; we set a custom epoch, define our own (bit)mask configuration for generated Id's and then display some information about the setup:

using IdGen;
using System;

class Program
{
    static void Main(string[] args)
    {
        // Let's say we take april 1st 2015 as our epoch
        var epoch = new DateTime(2015, 4, 1, 0, 0, 0, DateTimeKind.Utc);
        // Create a mask configuration of 45 bits for timestamp, 2 for generator-id 
        // and 16 for sequence
        var mc = new MaskConfig(45, 2, 16);
        // Create an IdGenerator with it's generator-id set to 0, our custom epoch 
        // and mask configuration
        var generator = new IdGenerator(0, epoch, mc);

        // Let's ask the mask configuration how many generators we could instantiate 
        // in this setup (2 bits)
        Console.WriteLine("Max. generators       : {0}", mc.MaxGenerators);

        // Let's ask the mask configuration how many sequential Id's we could generate 
        // in a single ms in this setup (16 bits)
        Console.WriteLine("Id's/ms per generator : {0}", mc.MaxSequenceIds);

        // Let's calculate the number of Id's we could generate, per ms, should we use
        // the maximum number of generators
        Console.WriteLine("Id's/ms total         : {0}", mc.MaxGenerators * mc.MaxSequenceIds);


        // Let's ask the mask configuration for how long we could generate Id's before
        // we experience a 'wraparound' of the timestamp
        Console.WriteLine("Wraparound interval   : {0}", mc.WraparoundInterval(generator.TimeSource));

        // And finally: let's ask the mask configuration when this wraparound will happen
        // (we'll have to tell it the generator's epoch)
        Console.WriteLine("Wraparound date       : {0}", mc.WraparoundDate(generator.Epoch, generator.TimeSource).ToString("O"));
    }
}

Output:

Max. generators       : 4
Id's/ms per generator : 65536
Id's/ms total         : 262144
Wraparound interval   : 407226.12:41:28.8320000 (about 1114 years)
Wraparound date       : 3130-03-13T12:41:28.8320000Z

IdGen also provides an ITimeSouce interface; this can be handy for unittesting purposes or if you want to provide a time-source for the timestamp part of your Id's that is not based on the system time. For unittesting we use our own MockTimeSource.

The following constructor overloads are available:

IdGenerator(int generatorId)
IdGenerator(int generatorId, DateTimeOffset epoch)
IdGenerator(int generatorId, DateTimeOffset epoch, MaskConfig maskConfi)
IdGenerator(int generatorId, ITimeSource timeSource)
IdGenerator(int generatorId, MaskConfig maskConfig)
IdGenerator(int generatorId, MaskConfig maskConfig, ITimeSource timeSource)

All properties are read-only to prevent changes once an IdGenerator has been instantiated.

The IdGenerator class provides a 'factory method' to quickly create an IdGenerator based on configuration file (.Net Framework only, not for .Net Core). To use this, add the following to your configuration:

<configuration>
  <configSections>
    <section name="idGenSection" type="IdGen.Configuration.IdGeneratorsSection, IdGen" />
  </configSections>

  <idGenSection>
    <idGenerators>
      <idGenerator name="foo" id="123"  epoch="2016-01-02T12:34:56" timestampBits="39" generatorIdBits="11" sequenceBits="13" tickDuration="0:00:00.001" />
      <idGenerator name="bar" id="987"  epoch="2016-02-01 01:23:45" timestampBits="20" generatorIdBits="21" sequenceBits="22" />
      <idGenerator name="baz" id="2047" epoch="2016-02-29"          timestampBits="21" generatorIdBits="21" sequenceBits="21" />
    </idGenerators>
  </idGenSection>

</configuration>

The attributes (name, id, epoch, timestampBits, generatorIdBits and sequenceBits) are required. The tickDuration is optional and defaults to the default tickduration from a DefaultTimeSource. Valid DateTime notations for the epoch are:

• yyyy-MM-ddTHH:mm:ss
• yyyy-MM-dd HH:mm:ss
• yyyy-MM-dd

You can get the IdGenerator from the config using the following code:

var generator = IdGenerator.GetFromConfig("foo");

Icon made by Freepik from www.flaticon.com is licensed by CC 3.0.