These scripts aim at providing an exsample distro on Jetson TK1. The Yocto Project is an open source collaboration project that provides templates, tools and methods to help you create custom Linux-based systems for embedded products regardless of the hardware architecture. It does so by automating the process of cross-compiling the root filesystem.

You need a install various packages.

exsample: Ubuntu12.04 sudo apt-get install sed wget subversion git-core coreutils unzip texi2html texinfo
libsdl1.2-dev docbook-utils fop gawk python-pysqlite2 diffstat make gcc
build-essential xsltproc g++ desktop-file-utils chrpath libgl1-mesa-dev
libglu1-mesa-dev autoconf automake groff libtool xterm libxml-parser-perl

exsample: Ubuntu14.04 sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib
build-essential chrpath socat libsdl1.2-dev xterm make xsltproc docbook-utils
fop dblatex xmlto autoconf automake libtool libglib2.0-dev

You need a setup to boot from SD card at Jetson TK1.

Please proceed to the official guide of section 3. http://developer.download.nvidia.com/embedded/L4T/r21_Release_v4.0/l4t_quick_start_guide.txt

At that time, you will need to replace command "sudo ./flash.sh ${BOARD} mmcblk0p1" to "sudo ./flash.sh 1jetson-tk1 mmcblk1p1".

cd /path/to/work

repo init -u https://github.com/watatuki/jetson-tk1-yocto-distro.git

repo sync

source poky/oe-init-build-env jetson-tk1-distro

bitbake jetson-tk1-image

SD card will assume that it is "/dev/sdx1".

sudo umount /dev/sdx1

sudo mkfs.ext4 /dev/sdx1

sudo mkdir -p /mnt/sdcard

sudo mount /dev/sdb1 /mnt/sdcard

cd /mnt/sdcard

sudo tar xvjf /path/to/work/jetson-tk1-distro/tmp/deploy/images/jetson-tk1-l4t/jetson-tk1-image-jetson-tk1-l4t.tar.bz2

sudo sync