Arduino library for EA DOG graphic displays: https://www.lcd-module.com/produkte/dog.html

This library supports the following displays:

• DOGM132-5
• DOGM128-6
• DOGL128-6
• DOGS102-6 (controller ST7565 and UC1701).

It supports hardware SPI and bit bang SPI and is tested with AVR, ESP32 and SAMD architecture.

This library is based on the Arduino library by EA: https://www.lcd-module.com/support/application-note/arduino-meets-ea-dog.html

You can install this library manually in your Arduino IDE if you follow these instructions: https://www.arduino.cc/en/Guide/Libraries