belledonnecommunications / linphone-desktop Goto Github PK

After downloading the latest desktop source and following the instructions above; I was able to run the python prepare which generated the Visual Studio project.sln.

I then opened the project.sln in VS 2015 and tried a REBUILD ALL and received an error;

Code C2220
Project: EP_linphone
File: info.c
Description: warning treated as error - no 'object' file generated linphone.vcxproj

Did I miss something?

Thank you,

Add a sip addresses list in Settings to block and reject calls.

Problem: If a sip address is on a contact, is it necessary to block the other sip addresses of this contact?

It's a pain that one has to rerun linphone-gui for password changes. The CLI does not support this either. So, either way should be brushed up a little.

Hi,

In some situations, this is not desirable to have multiple calls at a time, neither it is possible to limit those calls at the server side.

Beeing able to handle multiple calls with Linphone is great but it would be even greater to be able to limit the number of simultaneous calls on the Linphone side with an option in the preferences (or at least, in the ini file).
Something like "max_concurrent_calls=n" would be great.
Calls coming over the limit would then receive a BUSY state.

Regards.

$ flatpak run com.belledonnecommunications.linphone
Gtk-Message: Failed to load module "unity-gtk-module"
Gtk-Message: Failed to load module "canberra-gtk-module"
Gtk-Message: Failed to load module "canberra-gtk-module"
libGL error: No matching fbConfigs or visuals found
libGL error: failed to load driver: swrast
Unrecognized OpenGL version
Unrecognized OpenGL version

There is no "authorization user" provided for SIP configuration. The client assumes the sip username is the auth username, which is ridiculous, and insecure.

Hi,

I'm running Linphone on a remote Linux desktop with X2Go (ThinClient setup).
Everything runs smooth and Linphone is great in this environment but, on some random occasions, the Linphone GUI freezes for a few seconds or even 2-3 minutes sometimes while Linphone still works normaly (sound ok, communication ok), only the GUI is frozen and thus, it is impossible to hangup or do anything.

This visibly only occur under X2Go and I see that kind of logs in .xsession-errors :

Avertissement du gestionnaire de fenêtres : Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x160004c (Linphone) 
Avertissement du gestionnaire de fenêtres : meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed. 
Avertissement du gestionnaire de fenêtres : Fenêtre WM_TRANSIENT_FOR 0x180004c non valide indiquée pour 0x184cb8e (Linphone).

This didn't happen with Linphone 3.6.1 which is the version shipped with Ubuntu 16.04 (which this setup is based on) but I had more annoying problems with this version (truncated communications) so I installed Linphone Team PPA which provides Linphone 3.9.1.
From then, I get these "freezes" issues.
I built many different releases from then, even the current 3.11.1 that I built myself.

Here are a few setup informations, please ask if you need more :

OS : Ubuntu 16.04.2 LTS
Desktop : MATE Destop 1.12.1
X2Go Server : 4.1.0.0

Regards.

I am getting these errors. After the latest update.. Is there any configuration need to be done in the visual-studio, I am using visual-studio-2012.

**Error MSB6006 "cmd.exe" exited with code 2. EP_ffmpeg C:\ProgramFiles(x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets 172

Error MSB6006 "cmd.exe" exited with code 1. EP_bctoolbox C:\ProgramFiles(x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets 172

Error MSB6006 "cmd.exe" exited with code 1. EP_belr C:\ProgramFiles(x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets 172

Error MSB6006 "cmd.exe" exited with code 1. EP_bzrtp
C:\Program Files(x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets 172

Error MSB6006 "cmd.exe" exited with code 1. EP_ortp
C:\Program Files(x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets 172

Error MSB6006 "cmd.exe" exited with code 1. EP_bellesip
C:\Program Files(x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets 172

Error MSB6006 "cmd.exe" exited with code 1. EP_belcard
C:\Program Files(x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets 172

Error MSB6006 "cmd.exe" exited with code 1. EP_ms2
C:\Program Files(x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets 172

Error MSB6006 "cmd.exe" exited with code 1. EP_linphone
C:\Program Files(x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets 172

(Edited)
Tried performing ./prepare.py -C && ./prepare.py && make. Here's the error log from:

WORK/Build/linphone_builder/CMakeFiles/CMakeError.log

CMakeOutput.log.txt

Environment:
MacOSX 10.10.5
Xcode 7.2

I'm having an issue when interacting with FreeSWITCH, where linphone core fails to parse the SDP on a reply to re-INVITE that is initiating the pause state. I already resolved one issue with line endings in FS, so the latest 1.7 unstable branch has that fix, but I'm getting this out of Linphone core:

2016-07-12 10:53:58.424 PUC[35781:17085859] 3.9.1-962-g40778ef E session_description parser error for [v=0
o=FreeSWITCH 1468325773 1468325775 IN IP4 104.197.230.189
s=FreeSWITCH
c=IN IP4 104.197.230.189
t=0 0
m=audio 11366 RTP/AVP 9 101
a=rtpmap:9 G722/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
a=recvonly
a=rtcp:11367
m=video 11406 RTP/AVP 102
a=rtpmap:102 H264/90000
a=fmtp:102 profile-level-id=42801F;packetization-mode=1
b=AS:1024
a=rtcp-fb:102 ccm fir
a=rtcp-fb:102 ccm tmmbr
a=rtcp-fb:102 nack
a=rtcp-fb:102 nack pli
a=recvonly
a=rtcp:11407
]
2016-07-12 10:53:58.425 PUC[35781:17085859] 3.9.1-962-g40778ef E Failed to parse SDP message.
2016-07-12 10:53:58.425 PUC[35781:17085859] ****** callupdate

I've scanned through belle_sdp.g with this SDP and I can't see anything obvious, and suspect it's failing to set one of the parameters. Unfortunately, I can't tell which. I'm also attaching a PCAP with the SIP dialog that created the issue. There is a second call that comes in, and we attempt a "pause and answer". The pause state fails due to the issue parsing the SDP on the reply, and, in this case, crashes the client (VTCSecure PUC for Windows). This also impacts "pause" in general when engaged in dialogue with FreeSWITCH. This does not occur outside of FreeSWITCH, so there is some incompatible parameter that FS is sending and it would be great if someone from Belladonne can help spot the problem in the SDP so that I can address it.
ACD-352 - StillCrashingAfterSDPFix.pcapng.zip

I have been contemplating Linphone-desktop for well over a year now. Can it be used as a replacement for Skype? That would be the question. I'm considering the possibility to use your software and recommend it to my friends as well. Much appreciated in advance.

Hi all, I'm a noob with the project.

I have an error compiling after I run the prepare.py script with the --package option. But when I run the prepare.py script without the --package option and compile again it works just fine.

Output from iTerm:

Install the project...
-- Install configuration: "Release"
Cannot find source to copy: /Users/pvaldivieso/Downloads/linphone-desktop/OUTPUT/lib/mediastreamer/plugins/*.*.dylib
error: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool: can't open file: /Users/pvaldivieso/Downloads/linphone-desktop/WORK/PACKAGE/Linphone.app/Contents/MacOS/Linphone-bin (No such file or directory)
/usr/bin/patch: **** Can't find file /Users/pvaldivieso/Downloads/linphone-desktop/WORK/PACKAGE/Linphone.app/Contents/Resources/share/themes/Quartz/gtk-2.0/gtkrc : No such file or directory
pkgbuild: error: Component path "/Users/pvaldivieso/Downloads/linphone-desktop/WORK/PACKAGE/Linphone.app" does not exist.
[100%] Completed 'TARGET_linphone_package'
[100%] Built target TARGET_linphone_package

It goes all the way to the end and fails. I think it's related to mediastreamer and not finding some .dylib but I'm not sure.

Any help?

Which qt tool is used? mingw53_32？
There is no gcc_64 in windows qt............

Hello

I am trying to use the desktop app with freeswitch pbx.

My freeswitch pbx support multi domain so I am trying to see if I can use the desktop version with the multi domain feature (or multi tenants).

I managed to configure the linphone desktop account using the following setup, assuming pbx ip is 192.168.1.82 and extension 0000002 (the pbx use 7 digits extension format) is under domain "mydomain".

SIP Address --> sip:0000002@mydomain
SIP Server Address --> sip:192.168.1.82;transport=tcp

the same setup was done on the linphone android app

username --> 0000002
domain --> mydomain
proxy --> sip:192.168.1.82;transport=tcp
outbound proxy --> Enabled

With this setup I managed to call successfully from app to desktop client (audio both directions), the problem I have is that I cannot call the extension registered on the app.
The desktop client seems to ignore the proxy settings and the call does nothing (wireshark does not show any SIP flow) as it fails.

I wanted to investigate what prevents the desktop app to make the call, so I was trying to see if the client write any logs (I am using the mac version).

My question is, does the client write logs somewhere, and if yes where are they?

Apologies if this is not the right place to post this issue.

Thanks for your help

Massimo

Have you made an official release of linphone 4.0?

I don't see it here
http://www.linphone.org/releases/sources/linphone/

It's very annoying, when I open the app I have to insert the password again. Why does it not save?

If I have to make a call passed X time, it asks me for the password again.

Hi,

Linphone concatenates numbers when calling long numbers:

Example from linphonec (version 3.11.1)

linphonec> call +47580013000503
Establishing call id to sip:[email protected], assigned id 1
Contacting sip:[email protected]
linphonec> Call 1 to sip:[email protected] in progress.
linphonec> Not Found
linphonec> Call 1 with sip:[email protected] error.

We can observe the same in the SIP invite sent from the client:
2017/06/01 12:52:14.727244 10.11.12.119:5060 -> XX.XXX.XX.XXX:5060
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.11.12.119:5060;branch=z9hG4bK.GjlM4qTQm;rport
From: sip:[email protected];tag=dFSZuYvJo
To: sip:[email protected]
CSeq: 20 INVITE
Call-ID: qemDEfmtLX
Max-Forwards: 70
Supported: replaces, outbound
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO, UPDATE
Content-Type: application/sdp
Content-Length: 622
Contact: sip:[email protected]:32145;transport=udp;+sip.instance="urn:uuid:6188349d-dc77-4460-8db1-09986cab15c9"
User-Agent: Linphonec/3.11.1 (belle-sip/1.6.1)

v=0
o=+47580013000504 3150 2190 IN IP4 10.11.12.119
s=Talk
c=IN IP4 10.11.12.119
t=0 0
a=rtcp-xr:rcvr-rtt=all:10000 stat-summary=loss,dup,jitt,TTL voip-metrics
m=audio 7078 RTP/AVP 96 97 0 8 18 101 98
a=rtpmap:96 speex/16000
a=fmtp:96 vbr=on
a=rtpmap:97 speex/8000
a=fmtp:97 vbr=on
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/16000
a=rtpmap:98 telephone-event/8000
a=rtcp-fb:* trr-int 5000
a=rtcp-fb:* ccm tmmbr
m=video 9078 RTP/AVP 96
a=rtpmap:96 VP8/90000
a=rtcp-fb:* trr-int 5000
a=rtcp-fb:* ccm tmmbr
a=rtcp-fb:96 nack pli
a=rtcp-fb:96 nack sli
a=rtcp-fb:96 ack rpsi
a=rtcp-fb:96 ccm fir

Best Regards,
Perparim

I wonder will there be git for universal app?

Retaining audio device settings would be great. On top, forming a decive hierarchry might be even better. This part of the preferences is quite brittle. Again, if done on CLI level, then that would be even better.

The video freezes during a call.
It also happens when using the 'video preview' function (in the video menu). it starts well and then it freezes. Here are the logs I get when it stops working:

2017-07-14 13:50:38:568 WARNING VIDIOC_QBUF 1 failed: No such device
2017-07-14 13:50:43:569 WARNING ms2017-07-14 13:50:38:568 WARNING VIDIOC_QBUF 1 failed: No such device
2017-07-14 13:50:43:569 WARNING msv4l2: still [3] buffers not dequeued at exit !
2017-07-14 13:50:43:569 ERROR VIDIOC_STREAMOFF failed: No such device
2017-07-14 13:50:43:605 MESSAGE msv4l2_thread exited.
2017-07-14 13:50:43:605 MESSAGE msv4l2 thread has joined.
2017-07-14 13:50:43:605 MESSAGE ms_filter_unlink: MSV4L2Capture:0x56d6c30,0-->MSPixConv:0x56d6b30,0
2017-07-14 13:50:43:605 MESSAGE ms_filter_unlink: MSPixConv:0x56d6b30,0-->MSTee:0x5665d90,0
2017-07-14 13:50:43:605 MESSAGE ms_filter_unlink: MSTee:0x5665d90,1-->MSOGL:0x567e4a0,0
2017-07-14 13:50:43:605 MESSAGE ms_filter_unlink: MSTee:0x5665d90,2-->MSJpegWriter:0x565ae40,0
2017-07-14 13:50:43:607 MESSAGE Video MSTicker thread exiting
2017-07-14 13:50:43:607 WARNING ms_yuv_buf_allocator_free(): leaving 1 mblk_t still ref'd, possible leak.
2017-07-14 13:50:43:609 MESSAGE QT: "Delete context info:" 0x5637c20
v4l2: still [3] buffers not dequeued at exit !
2017-07-14 13:50:43:569 ERROR VIDIOC_STREAMOFF failed: No such device
2017-07-14 13:50:43:605 MESSAGE msv4l2_thread exited.
2017-07-14 13:50:43:605 MESSAGE msv4l2 thread has joined.
2017-07-14 13:50:43:605 MESSAGE ms_filter_unlink: MSV4L2Capture:0x56d6c30,0-->MSPixConv:0x56d6b30,0
2017-07-14 13:50:43:605 MESSAGE ms_filter_unlink: MSPixConv:0x56d6b30,0-->MSTee:0x5665d90,0
2017-07-14 13:50:43:605 MESSAGE ms_filter_unlink: MSTee:0x5665d90,1-->MSOGL:0x567e4a0,0
2017-07-14 13:50:43:605 MESSAGE ms_filter_unlink: MSTee:0x5665d90,2-->MSJpegWriter:0x565ae40,0
2017-07-14 13:50:43:607 MESSAGE Video MSTicker thread exiting
2017-07-14 13:50:43:607 WARNING ms_yuv_buf_allocator_free(): leaving 1 mblk_t still ref'd, possible leak.
2017-07-14 13:50:43:609 MESSAGE QT: "Delete context info:" 0x5637c20

if I close the window and try video preview again, I see a black screen with the log:

2017-07-14 13:52:35:790 MESSAGE Setting video size 640x480 on stream [0x561da60]
2017-07-14 13:52:35:790 ERROR Could not open /dev/video0: No such file or directory
2017-07-14 13:52:35:790 ERROR Could not open /dev/video0: No such file or directory
2017-07-14 13:52:35:790 MESSAGE ogl_display_new : 0x318b3e0

2017-07-14 13:52:35:790 ERROR no such method on filter MSOGL, fid=16387 method index=1
2017-07-14 13:52:35:790 MESSAGE ms_filter_link: MSV4L2Capture:0x561bc40,0-->MSPixConv:0x5634f60,0
2017-07-14 13:52:35:790 MESSAGE ms_filter_link: MSPixConv:0x5634f60,0-->MSTee:0x318b590,0
2017-07-14 13:52:35:790 MESSAGE ms_filter_link: MSTee:0x318b590,1-->MSOGL:0x561aed0,0
2017-07-14 13:52:35:790 MESSAGE ms_filter_link: MSTee:0x318b590,2-->MSJpegWriter:0x55f8d60,0
2017-07-14 13:52:35:790 MESSAGE Video MSTicker priority left to normal.
2017-07-14 13:52:35:790 MESSAGE msv4l2_thread starting
2017-07-14 13:52:35:791 ERROR Could not open /dev/video0: No such file or directory
2017-07-14 13:52:35:791 WARNING msv4l2 could not be openned
2017-07-14 13:52:35:791 MESSAGE msv4l2_thread exited.
2017-07-14 13:52:35:792 MESSAGE QT: Thread QThread(0x1d7a7d0) "Set context info (width: 590, height: 395):" 0x562a330
2017-07-14 13:52:35:792 MESSAGE set native window id: 0x562a330 (width: 590, height: 395)

2017-07-14 13:52:35:792 ERROR no such method on filter MSV4L2Capture, fid=16387 method index=4
2017-07-14 13:52:35:792 MESSAGE init opengles_display (590 x 395, gl initialized:0)
2017-07-14 13:52:35:793 MESSAGE resize opengles_display (590 x 395, gl initialized:0)
2017-07-14 13:52:35:803 MESSAGE OpenGL program info: [NO INFORMATION]
2017-07-14 13:52:38:490 MESSAGE msv4l2 thread has joined.
2017-07-14 13:52:38:490 MESSAGE ms_filter_unlink: MSV4L2Capture:0x561bc40,0-->MSPixConv:0x5634f60,0
2017-07-14 13:52:38:490 MESSAGE ms_filter_unlink: MSPixConv:0x5634f60,0-->MSTee:0x318b590,0
2017-07-14 13:52:38:490 MESSAGE ms_filter_unlink: MSTee:0x318b590,1-->MSOGL:0x561aed0,0
2017-07-14 13:52:38:490 MESSAGE ms_filter_unlink: MSTee:0x318b590,2-->MSJpegWriter:0x55f8d60,0
2017-07-14 13:52:38:490 MESSAGE Video MSTicker thread exiting
2017-07-14 13:52:38:493 MESSAGE QT: "Delete context info:" 0x562a330

I am using gnome 3.24.2

Can you separate two states?

1. Voice calls: only voice
2. Video calls, video and voice

when i installed your software on ubuntu and debian it works very good, in fedora it can not hear any sound? your protocol is necessary to have microphone on?
thanks

After running prepare.exe -G "Visual Studio 14" -DENABLE_VIDEO=NO,
I build the Project.sln (Release W32) and get a C2037 error, for undefined struct (_OList) in
"\submodules\bctoolbox\src\utils\port.c"

I assume the dllexport is not working, and therefore the import is failing, resulting in the given error.
Here is the concrete error:

C:\Projects\linphone-desktop\submodules\bctoolbox\src\utils\port.c(687):
error C2037: Auf der linken Seite von "next" wird eine undefinierte struct/union "_OList" bestimmt [C:\Projects\linphone-desktop\WORK\Build\bctoolbox\src\bctoolbox.vcxproj]

C:\Projects\linphone-desktop\submodules\bctoolbox\src\utils\port.c(688):
error C2037: Auf der linken Seite von "data" wird eine undefinierte struct/union "_OList" bestimmt [C:\Projects\linphone-desktop\WORK\Build\bctoolbox\src\bctoolbox.vcxproj]

The output is partially german:
Auf der linken Seite von "foo" wird eine undefinierte struct/union "bar" bestimmt
means
On the left side of "foo" a undefined struct/union "bar" is defined

Here is the complete error from bctoolbox.vcxproj
bctoolbox_log.txt

Can you help me with this issue?
Is the vs2015 generator working with the project?
Is there anything else I must provide for detailed issue-description?

In submodules/linphone/coreapi/lpconfig.c:524:2: error: ‘bctbx_level’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
bctbx_logv(BCTBX_LOG_DOMAIN, bctbx_level,fmt,list);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Does anyone know how to fix this?

Im building linphone-desktop , followed the instructions in readme
using cmake 3.8.1
python prepare.py created the solution file , build it

Severity	Code	Description	Project	File	Line	Suppression State
Error	LNK2001	unresolved external symbol _mbedtls_snprintf [C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\mbedx509.vcxproj]	EP_mbedtls	C:\linphone-desktop\WORK\desktop\cmake\x509_crt.obj	1	
Error	LNK2001	unresolved external symbol _mbedtls_snprintf [C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\mbedx509.vcxproj]	EP_mbedtls	C:\linphone-desktop\WORK\desktop\cmake\x509_crl.obj	1	
Error	LNK2001	unresolved external symbol _mbedtls_snprintf [C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\mbedx509.vcxproj]	EP_mbedtls	C:\linphone-desktop\WORK\desktop\cmake\x509_crt.obj	1	
Error	LNK2001	unresolved external symbol _mbedtls_snprintf [C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\mbedx509.vcxproj]	EP_mbedtls	C:\linphone-desktop\WORK\desktop\cmake\x509_csr.obj	1	
Error	LNK2001	unresolved external symbol _mbedtls_snprintf [C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\mbedx509.vcxproj]	EP_mbedtls	C:\linphone-desktop\WORK\desktop\cmake\x509_crl.obj	1	
Error	LNK2001	unresolved external symbol _mbedtls_snprintf [C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\mbedx509.vcxproj]	EP_mbedtls	C:\linphone-desktop\WORK\desktop\cmake\x509_csr.obj	1	
Error	LNK2019	unresolved external symbol _mbedtls_snprintf referenced in function _mbedtls_x509_dn_gets [C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\mbedx509.vcxproj]	EP_mbedtls	C:\linphone-desktop\WORK\desktop\cmake\x509.obj	1	
Error	LNK2019	unresolved external symbol _mbedtls_snprintf referenced in function _mbedtls_x509_dn_gets [C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\mbedx509.vcxproj]	EP_mbedtls	C:\linphone-desktop\WORK\desktop\cmake\x509.obj	1	
Error	LNK1120	1 unresolved externals [C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\mbedx509.vcxproj]	EP_mbedtls	C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\MinSizeRel\mbedx509.dll	1	
Error	LNK1120	1 unresolved externals [C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\mbedx509.vcxproj]	EP_mbedtls	C:\linphone-desktop\WORK\desktop\Build\mbedtls\library\MinSizeRel\mbedx509.dll	1	
Error	MSB6006	"cmd.exe" exited with code 2.	EP_ffmpeg	C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets	171	
Error	MSB6006	"cmd.exe" exited with code 1.	EP_bctoolbox	C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets	171	
Error	MSB6006	"cmd.exe" exited with code 1.	EP_belr	C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets	171	
Error	MSB6006	"cmd.exe" exited with code 1.	EP_bzrtp	C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets	171	
Error	MSB6006	"cmd.exe" exited with code 1.	EP_ortp	C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets	171	
Error	MSB6006	"cmd.exe" exited with code 1.	EP_bellesip	C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets	171	
Error	MSB6006	"cmd.exe" exited with code 1.	EP_belcard	C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets	171	
Error	MSB6006	"cmd.exe" exited with code 1.	EP_ms2	C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets	171	
Error	MSB6006	"cmd.exe" exited with code 1.	EP_linphone	C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets	171	

I am building latest version (commit 14312f9) for python and I get following issue:
`
Scanning dependencies of target pylinphone
make[6]: Leaving directory '/home/surendra/linphone-desktop/WORK/python/Build/pylinphone'
make[6]: Entering directory '/home/surendra/linphone-desktop/WORK/python/Build/pylinphone'
[ 50%] Building C object CMakeFiles/pylinphone.dir/linphone.c.o
/home/surendra/linphone-desktop/WORK/python/Build/pylinphone/linphone.c: In function ‘pylinphone_Core_set_im_encryption_engine’:
/home/surendra/linphone-desktop/WORK/python/Build/pylinphone/linphone.c:16409:69: error: ‘pylinphone_ImEncryptionEngineType’ undeclared (first use in this function)
if ((value != Py_None) && !PyObject_IsInstance(value, (PyObject *)&pylinphone_ImEncryptionEngineType)) {
^
/home/surendra/linphone-desktop/WORK/python/Build/pylinphone/linphone.c:16409:69: note: each undeclared identifier is reported only once for each function it appears in
/home/surendra/linphone-desktop/WORK/python/Build/pylinphone/linphone.c:16418:27: error: implicit declaration of function ‘pylinphone_ImEncryptionEngine_get_native_ptr’ [-Werror=implicit-function-declaration]
if ((_imee_native_ptr = pylinphone_ImEncryptionEngine_get_native_ptr(_imee)) == NULL) {
^
/home/surendra/linphone-desktop/WORK/python/Build/pylinphone/linphone.c:16418:25: error: assignment makes pointer from integer without a cast [-Werror=int-conversion]
if ((_imee_native_ptr = pylinphone_ImEncryptionEngine_get_native_ptr(_imee)) == NULL) {
^
cc1: all warnings being treated as errors
CMakeFiles/pylinphone.dir/build.make:67: recipe for target 'CMakeFiles/pylinphone.dir/linphone.c.o' failed
make[6]: *** [CMakeFiles/pylinphone.dir/linphone.c.o] Error 1
make[6]: Leaving directory '/home/surendra/linphone-desktop/WORK/python/Build/pylinphone'
CMakeFiles/Makefile2:99: recipe for target 'CMakeFiles/pylinphone.dir/all' failed
make[5]: *** [CMakeFiles/pylinphone.dir/all] Error 2
make[5]: Leaving directory '/home/surendra/linphone-desktop/WORK/python/Build/pylinphone'
Makefile:127: recipe for target 'all' failed
make[4]: *** [all] Error 2
make[4]: Leaving directory '/home/surendra/linphone-desktop/WORK/python/Build/pylinphone'
CMakeFiles/TARGET_pylinphone.dir/build.make:111: recipe for target '/home/surendra/linphone-desktop/WORK/python/Stamp/TARGET_pylinphone/TARGET_pylinphone-build' failed
make[3]: *** [/home/surendra/linphone-desktop/WORK/python/Stamp/TARGET_pylinphone/TARGET_pylinphone-build] Error 2
make[3]: Leaving directory '/home/surendra/linphone-desktop/WORK/python/cmake'
CMakeFiles/Makefile2:1116: recipe for target 'CMakeFiles/TARGET_pylinphone.dir/all' failed
make[2]: *** [CMakeFiles/TARGET_pylinphone.dir/all] Error 2
make[2]: Leaving directory '/home/surendra/linphone-desktop/WORK/python/cmake'
Makefile:83: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/home/surendra/linphone-desktop/WORK/python/cmake'
Makefile:14: recipe for target 'python-build' failed
make: *** [python-build] Error 2

`

building 4.0 branch with prepary.py --all-codecs on macOS environment fails

make output error

nasm: fatal: unrecognised output format `macho64' - use -hf for a list
type `nasm -h' for help
make[4]: *** [codec/common/x86/cpuid.o] Error 1
make[3]: *** [/Users/massimo/Linphone/linphone-desktop/WORK/desktop/Stamp/EP_openh264/EP_openh264-build] Error 2
make[2]: *** [CMakeFiles/EP_openh264.dir/all] Error 2
make[1]: *** [all] Error 2
make: *** [desktop-build] Error 2

output of nasm -hf on my system

valid output formats for -f are (`*' denotes default):
  * bin       flat-form binary files (e.g. DOS .COM, .SYS)
    aout      Linux a.out object files
    aoutb     NetBSD/FreeBSD a.out object files
    coff      COFF (i386) object files (e.g. DJGPP for DOS)
    elf       ELF32 (i386) object files (e.g. Linux)
    as86      Linux as86 (bin86 version 0.3) object files
    obj       MS-DOS 16-bit/32-bit OMF object files
    win32     Microsoft Win32 (i386) object files
    rdf       Relocatable Dynamic Object File Format v2.0
    ieee      IEEE-695 (LADsoft variant) object file format
    macho     NeXTstep/OpenStep/Rhapsody/Darwin/MacOS X object files

I tried to use the latest version 4.1.1 between a laptop with Ubuntu 17.04 and a laptop with Linux Mint 18.1, and the audio was almost unusable because of strong feedback/echo. On both machines echo cancellation was enabled in Linphone preferences (i also tried to disable it on one machine, but it only made it worse, i believe).

I tried before the versions of Linphone provided by these two distributions (versions 3 -- something) and had no big issues with the audio (but there were problems with the video).

However, on one attempt of using version 4.1.1, for the first minute or so, the echo was almost absent. So, i am not sure if there were any regression.

Hi, I just tried Linphone 4.0 out with a friend and we found that the call was extremely quiet. The actual Linphone program had the right volume -- the ringtone was fine, but we could barely hear eachother in the call without turning the system volume up drastically, which makes every other sound (including the Linphone ringtones) deafeningly loud.

There don't appear to be any volume options in the settings, either, so we had to switch back to Mumble to be able to talk.

I was using the Linux Flatpak, and my friend was using the Windows version on Windows 7.

Please ask if you need any more info.

Recently linphone stopped working for me. Neither registration nor calling outwards is possible anymore. Calling results in an IO Error.
Starting linphone --verbose revealed:

linphone-message : transaction [0xd0cdd0] channel state changed to [RES_IN_PROGRESS]
linphone-message : Resolver is using DNS server(s):
linphone-message : 	192.168.1.1
linphone-message : No SRV result for [_sip._tcp.sip.easybell.de], trying A/AAAA.
linphone-message : Resolver is using DNS server(s):
linphone-message : 	192.168.1.1
linphone-error : channel_res_done: DNS resolution failed for sip.easybell.de
linphone-message : channel 0xd31750: state ERROR

So it seems to be an DNS resolving problem. Indeed it's true that there is no SRV, but an A entry for sip.easybell.de and it had worked before (at least with linphone 3.9).

Actually there are more people experiencing the same issue at the Arch Linux forum.

Is this a bug or a configuration issue? Please let me know if I can provide you with more information.
Thanks a lot in advance.

Edit:
Linphone 3.10.2-3 on Arch Linux.

I encountered this when trying Linphone 4.0 just now. I had "ZRTP" set in the settings menu, but my friend had "None" set. Our calls would connect, but would be completely silent.

There was no message about encryption incompatibilities that I could see. It appeared to be a perfectly functioning call, just we couldn't hear eachother.

Building on Mac OS 10.12.5

Undefined symbols for architecture x86_64: "_allocb", referenced from: _dec_process in amrnb.c.o _enc_process in amrnb.c.o _enc_process in amrwb.c.o _dec_process in amrwb.c.o "_fmtp_get_value", referenced from: _amr_match in msamr.c.o _enc_add_fmtp in amrnb.c.o _enc_add_fmtp in amrwb.c.o "_freemsg", referenced from: _dec_process in amrnb.c.o _enc_process in amrnb.c.o _enc_process in amrwb.c.o _dec_process in amrwb.c.o "_getq", referenced from: _dec_process in amrnb.c.o _enc_process in amrnb.c.o _enc_process in amrwb.c.o _dec_process in amrwb.c.o "_mblk_meta_copy", referenced from: _dec_process in amrnb.c.o _dec_process in amrwb.c.o "_msgdsize", referenced from: _dec_process in amrnb.c.o _dec_process in amrwb.c.o "_ortp_free", referenced from: _enc_uninit in amrnb.c.o _enc_uninit in amrwb.c.o _dec_uninit in amrwb.c.o "_ortp_logv", referenced from: _ortp_message in msamr.c.o _ortp_warning in amrnb.c.o _ortp_message in amrnb.c.o _ortp_error in amrnb.c.o _ortp_warning in amrwb.c.o _ortp_message in amrwb.c.o _ortp_error in amrwb.c.o ... "_ortp_malloc", referenced from: _enc_init in amrwb.c.o _dec_init in amrwb.c.o "_ortp_malloc0", referenced from: _enc_init in amrnb.c.o "_payload_type_clone", referenced from: _amr_match in msamr.c.o "_putq", referenced from: _dec_process in amrnb.c.o _enc_process in amrnb.c.o _enc_process in amrwb.c.o _dec_process in amrwb.c.o ld: symbol(s) not found for architecture x86_64 clang: error: linker command failed with exit code 1 (use -v to see invocation) make[6]: *** [src/libmsamr.so] Error 1 make[5]: *** [src/CMakeFiles/msamr.dir/all] Error 2 make[4]: *** [all] Error 2 make[3]: *** [/Users/jash/Developer/linphone-desktop/WORK/desktop/Stamp/EP_msamr/EP_msamr-build] Error 2 make[2]: *** [CMakeFiles/EP_msamr.dir/all] Error 2 make[1]: *** [all] Error 2 make: *** [desktop-build] Error 2

I'm a noob at this so please tell me step by step how to solve this.
During the second step for Linux in the README.md, I encountered the following error

[ 38%] Performing configure step for 'EP_xml2'
loading initial cache file /home/pi/linphone-desktop/WORK/desktop//tmp/EP_xml2/EP_xml2-cache.cmake
-- Configuring done
CMake Error at CMakeLists.txt:345 (add_library):
Cannot find source file:

schematron.c

Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm .hpp
.hxx .in .txx

-- Build files have been written to: /home/pi/linphone-desktop/WORK/desktop/Build/xml2
CMakeFiles/EP_xml2.dir/build.make:103: recipe for target '/home/pi/linphone-desktop/WORK/desktop/Stamp/EP_xml2/EP_xml2-configure' failed
make[3]: *** [/home/pi/linphone-desktop/WORK/desktop/Stamp/EP_xml2/EP_xml2-configure] Error 1
make[3]: Leaving directory '/home/pi/linphone-desktop/WORK/desktop/cmake'
CMakeFiles/Makefile2:854: recipe for target 'CMakeFiles/EP_xml2.dir/all' failed
make[2]: *** [CMakeFiles/EP_xml2.dir/all] Error 2
make[2]: Leaving directory '/home/pi/linphone-desktop/WORK/desktop/cmake'
Makefile:76: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/home/pi/linphone-desktop/WORK/desktop/cmake'
Makefile:14: recipe for target 'desktop-build' failed
make: *** [desktop-build] Error 2

I cannot compile Belr (Debian Wheezy, libstdc++6 ver 4.7.2-5).

Hello, I tried ./prepare.py -c & ./prepare.py on MacOS. Getting errors on the make as follows:

Traceback (most recent call last):
  File "./prepare.py", line 263, in <module>
    sys.exit(main())
  File "./prepare.py", line 247, in main
    if target.generator.endswith('Ninja'):
AttributeError: 'NoneType' object has no attribute 'endswith'

this issue is repeatable on fresh app install.

The case scenario is as follow:

creating an account under a multi-tenant pbx configuration as such

sip:<extension_id>@<realm_name>
e.g. sip:0000005@italy_pbx

and leveraging proxy settings (route field) to point to the pbx ip address which manage the realm

How to replicate

Upon launching the app from a fresh install (no account exists), instead of using the assistant, go to preferences and add a new proxy account

in the sip account form fill data as sample below

sip address: sip:0000005@italy_pbx
sip server address: sip:34.34.36.173;transport=udp
route: sip:34.34.36.173;transport=udp

pressing confirm will crash the app.

errors shown in the logs

2017-07-01 17:24:12:380 WARNING QT: qrc:/ui/views/App/Settings/SettingsSipAccountsEdit.js:14: Error: Unknown method return type: std::shared_ptrlinphone::ProxyConfig
2017-07-01 17:24:14:216 ERROR fast_header_address parser error for [ ]
2017-07-01 17:24:14:216 ERROR Cannot create LinphoneAddress, bad uri [ ]
2017-07-01 17:24:21:332 ERROR fast_header_address parser error for [s]
2017-07-01 17:24:21:332 ERROR Cannot create LinphoneAddress, bad uri [s]
2017-07-01 17:24:21:678 ERROR fast_header_address parser error for [si]
2017-07-01 17:24:21:678 ERROR Cannot create LinphoneAddress, bad uri [si]
2017-07-01 17:24:22:342 ERROR fast_header_address parser error for [sip]
2017-07-01 17:24:22:342 ERROR Cannot create LinphoneAddress, bad uri [sip]
2017-07-01 17:24:22:757 ERROR fast_header_address parser error for [sip:]
2017-07-01 17:24:22:757 ERROR Cannot create LinphoneAddress, bad uri [sip:]
2017-07-01 17:24:25:269 MESSAGE [org.antlr.runtime.MismatchedTokenException] reason []
2017-07-01 17:24:25:269 ERROR fast_header_address parser error for [sip:0000005@]
2017-07-01 17:24:25:269 ERROR Cannot create LinphoneAddress, bad uri [sip:0000005@]

workaround

use assistant to create a simple account (sip:[email protected]) it doesn't matter if details do not allow to register on the server.
once account is created, go to preferences and change values as test case.

I've just installed the latest Linphone from the PPA (3.9.1-1) on a Linux Mint machine. Created an account with sip.linphone.org, and the client shows it's registered. However: If I call to my other account used on my Android phone (different SIP provider), I only get an "IO error". Same the other way around (calling this SIP account from the Android device).

As both devices are currently in the same WiFi, I tried via UDP at the user@192* local address. That works without issues. But as we want that installation for calls from/to abroad, a local address is not really helpful.

I've configured Linphone to use a STUN server (stun.linphone.org) and told it I'm behind a firewall and it should use that STUN. No dice, it keeps complaining "IO error" and doesn't establish a single call from/to outside.

Any ideas?

This error occurs when adding the -package parameter to compile

/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool: no LC_RPATH load command with path ...

I want to build linphone-desktop in windows 10.
After running the prepare.py script without any error, I build the Visual Studio solution (Project.sln) but two errors appeared.

error MSB6006: "cmd.exe" exited with code 1. C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets 151

&

error C2065: 'ENETUNREACH' : undeclared identifier [C:\linphone-desktop\WORK\desktop\Build\bctoolbox\src\bctoolbox.vcxproj] C:\submodules\bctoolbox\src\utils\port.c

How can I fix these errors?

Message is: register-info.cc error: ‘stoi’ is not a member of ‘std’
Resolved by adding SET(CMAKE_CXX_FLAGS "-std=c++0x") into submodules/linphone/daemon/CMakelists.txt

We are not able to register to SIP Server through windows desktop (3.10.2) but working fine in android and linphone web.

message: 2017-02-17 19:07:22:827 nict_on_timer_E: sending retransmission
message: 2017-02-17 19:07:22:827 channel [052D7B70]: message sent to [UDP://sip-162412.accounts.vocalocity.com:5060], size: [617] bytes
REGISTER sip:sip-162412.accounts.vocalocity.com SIP/2.0

Via: SIP/2.0/UDP 192.168.137.173:5060;branch=z9hG4bK.NdxFswHqf;rport

From: sip:[email protected];tag=L5G8CxAAv

To: sip:[email protected]

CSeq: 21 REGISTER

Call-ID: Pp2PNLV1x2

Max-Forwards: 70

Supported: replaces, outbound

Accept: application/sdp

Accept: text/plain

Accept: application/vnd.gsma.rcs-ft-http+xml

Contact: sip:[email protected];transport=udp;+sip.instance="urn:uuid:1d9814c4-c469-4ff4-bd41-5c747c133a38"

Expires: 3600

User-Agent: Linphone/3.10.2 (belle-sip/1.5.0)

message: 2017-02-17 19:07:23:295 A timeout related to this channel occured and no message received during last 60 seconds. This channel is suspect, moving to error state
message: 2017-02-17 19:07:23:295 channel 052D7B70: state ERROR
warning: 2017-02-17 19:07:23:295 Transaction [01201418] reporting timeout, reporting to channel.
message: 2017-02-17 19:07:23:327 transaction [01201418] channel state changed to [ERROR]
message: 2017-02-17 19:07:23:327 Refresher: scheduling next timer in 60000 ms
message: 2017-02-17 19:07:23:327 Register refresher [503] reason [io error] for proxy [sip:sip-162412.accounts.vocalocity.com;transport=udp]
message: 2017-02-17 19:07:23:327 Refresher: scheduling next timer in 2000 ms
message: 2017-02-17 19:07:23:327 Register refresher [408] reason [timeout] for proxy [sip:sip-162412.accounts.vocalocity.com;transport=udp]
message: 2017-02-17 19:07:23:327 Changing [client] [REGISTER] transaction [01201418], from state [TRYING] to [TERMINATED]
message: 2017-02-17 19:07:23:327 Client internal REGISTER transaction [01201418] terminated
message: 2017-02-17 19:07:25:352 Channel [052D7B70] destroyed
message: 2017-02-17 19:07:25:352 Transaction [01201418] deleted
message: 2017-02-17 19:07:25:352 belle_sip_client_transaction_send_request(): waiting channel to be ready
message: 2017-02-17 19:07:25:352 channel [052D7B70]: starting resolution of sip-162412.accounts.vocalocity.com
message: 2017-02-17 19:07:25:352 channel 052D7B70: state RES_IN_PROGRESS
message: 2017-02-17 19:07:25:352 transaction [01201778] channel state changed to [RES_IN_PROGRESS]
message: 2017-02-17 19:07:25:368 Resolver is using DNS server(s):
message: 2017-02-17 19:07:25:368 192.168.137.3
message: 2017-02-17 19:07:25:368 8.8.8.8
message: 2017-02-17 19:07:25:368 resolver_process_data dns_res_check() in progress
message: 2017-02-17 19:07:25:368 DNS resolution awaiting response, queued to main loop
message: 2017-02-17 19:07:25:383 SRV _sip._udp.sip-162412.accounts.vocalocity.com resolved to [target:reg6app1.proxy.vocalocity.com. port:5060 prio:5 weight:10]
message: 2017-02-17 19:07:25:383 SRV _sip._udp.sip-162412.accounts.vocalocity.com resolved to [target:reg2app1.proxy.vocalocity.com. port:5060 prio:10 weight:10]
message: 2017-02-17 19:07:25:383 Starting A/AAAA query for srv result [reg6app1.proxy.vocalocity.com.]
message: 2017-02-17 19:07:25:399 Resolver is using DNS server(s):
message: 2017-02-17 19:07:25:399 192.168.137.3
message: 2017-02-17 19:07:25:399 8.8.8.8
message: 2017-02-17 19:07:25:399 resolver_process_data dns_res_check() in progress
message: 2017-02-17 19:07:25:399 DNS resolution awaiting response, queued to main loop
message: 2017-02-17 19:07:25:399 Starting A/AAAA query for srv result [reg2app1.proxy.vocalocity.com.]
message: 2017-02-17 19:07:25:415 Resolver is using DNS server(s):
message: 2017-02-17 19:07:25:415 192.168.137.3
message: 2017-02-17 19:07:25:415 8.8.8.8
message: 2017-02-17 19:07:25:415 resolver_process_data dns_res_check() in progress
message: 2017-02-17 19:07:25:415 DNS resolution awaiting response, queued to main loop
message: 2017-02-17 19:07:25:415 reg2app1.proxy.vocalocity.com. resolved to 107.23.9.200
message: 2017-02-17 19:07:25:415 A query finished for srv result [reg2app1.proxy.vocalocity.com.]
message: 2017-02-17 19:07:25:415 reg6app1.proxy.vocalocity.com. resolved to 54.213.138.55
message: 2017-02-17 19:07:25:415 A query finished for srv result [reg6app1.proxy.vocalocity.com.]
message: 2017-02-17 19:07:25:415 All A/AAAA results for combined resolution have arrived.
message: 2017-02-17 19:07:25:415 channel 052D7B70: state RES_DONE
message: 2017-02-17 19:07:25:415 transaction [01201778] channel state changed to [RES_DONE]
message: 2017-02-17 19:07:25:415 channel 052D7B70: state CONNECTING
message: 2017-02-17 19:07:25:415 transaction [01201778] channel state changed to [CONNECTING]
message: 2017-02-17 19:07:25:415 Trying to connect to [UDP://54.213.138.55:5060]
message: 2017-02-17 19:07:25:415 belle_sip_get_src_addr_for(): af_inet6=0
message: 2017-02-17 19:07:25:415 Channel has local address 192.168.137.173:5060
message: 2017-02-17 19:07:25:415 channel 052D7B70: state READY
message: 2017-02-17 19:07:25:415 transaction [01201778] channel state changed to [READY]
message: 2017-02-17 19:07:25:415 Changing [client] [REGISTER] transaction [01201778], from state [INIT] to [TRYING]
message: 2017-02-17 19:07:25:415 channel [052D7B70]: message sent to [UDP://sip-162412.accounts.vocalocity.com:5060], size: [617] bytes
REGISTER sip:sip-162412.accounts.vocalocity.com SIP/2.0

Via: SIP/2.0/UDP 192.168.137.173:5060;branch=z9hG4bK.xRTF29uW5;rport

From: sip:[email protected];tag=L5G8CxAAv

To: sip:[email protected]

CSeq: 22 REGISTER

Call-ID: Pp2PNLV1x2

Max-Forwards: 70

Supported: replaces, outbound

Accept: application/sdp

Accept: text/plain

Accept: application/vnd.gsma.rcs-ft-http+xml

Contact: sip:[email protected];transport=udp;+sip.instance="urn:uuid:1d9814c4-c469-4ff4-bd41-5c747c133a38"

Expires: 3600

User-Agent: Linphone/3.10.2 (belle-sip/1.5.0)

message: 2017-02-17 19:07:25:927 nict_on_timer_E: sending retransmission
message: 2017-02-17 19:07:25:927 channel [052D7B70]: message sent to [UDP://sip-162412.accounts.vocalocity.com:5060], size: [617] bytes
REGISTER sip:sip-162412.accounts.vocalocity.com SIP/2.0

Via: SIP/2.0/UDP 192.168.137.173:5060;branch=z9hG4bK.xRTF29uW5;rport

From: sip:[email protected];tag=L5G8CxAAv

To: sip:[email protected]

CSeq: 22 REGISTER

Call-ID: Pp2PNLV1x2

Max-Forwards: 70

Supported: replaces, outbound

Accept: application/sdp

Accept: text/plain

Accept: application/vnd.gsma.rcs-ft-http+xml

Contact: sip:[email protected];transport=udp;+sip.instance="urn:uuid:1d9814c4-c469-4ff4-bd41-5c747c133a38"

Expires: 3600

User-Agent: Linphone/3.10.2 (belle-sip/1.5.0)

Good morning (evening in France),

Is there a working build at SHA-1 = 9043c7f of this repo? If not, what is a usable SHA of this repo that I can mimic submodules for a good mac build?

Thanks,

Zack

Hi

I have tried to compile the latest version 3.11.2 from the master branch and calling out works fine, but when I am trying to answer calls the linphonec process core dumps. The linphone application works fine, but the commandline version does not handle incoming calls at all.

I have not compiled with debug info but got the following backtrace in gdb from the generated core file:

Core was generated by `./linphonec -d 6 -l /home/velferd/bin/log.txt'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00007fdc9d265a94 in linphone_call_accept_with_params () from /home/velferd/linphone-desktop/OUTPUT/desktop/lib/liblinphone.so.9
[Current thread is 1 (Thread 0x7fdc9d6d7740 (LWP 19166))]
(gdb) bt
#0 0x00007fdc9d265a94 in linphone_call_accept_with_params () from /home/velferd/linphone-desktop/OUTPUT/desktop/lib/liblinphone.so.9
#1 0x0000563c5ab76532 in lpc_cmd_answer ()
#2 0x0000563c5ab7715e in linphonec_parse_command_line ()
#3 0x0000563c5ab71327 in main ()
(gdb) quit

There is also a post of the same problem here:
https://lists.gnu.org/archive/html/linphone-developers/2017-05/msg00007.html

Does anyone have a workaround for this issue or could someone patch the master branch to fix it?

I rolled back to version 3.11.1-192-g2a4a17bff and everything is working like a charm there!

Best Regards,
Tomas

As soon as I tab away or press enter the TURN password disappears. Calls do not seem to make use of it.

Mediastreamer2 does not send video when CIF is selected on Android Samsung Galaxy Tab 10''. Basically the resizing function is broken. I have submitted a fix here that has been tested and works.

BelledonneCommunications/mediastreamer2#8

Hello,

I have managed to compile the app but when I launch it from the build output folder

OUTPUT/desktop/build/linphone

a terminal windows opens up and I can see from the dock (I am on mac) that the app icon appears and disappears, like it would fail and close straight away.

I don't know where I would find logs of the app. The terminal windows stays open (see below)

Nicolas-MacBook-Air:~ massimo$ /Users/massimo/Linphone/linphone-desktop/OUTPUT/desktop/bin/linphone ; exit;
logout
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.

[Process completed]

Maybe I am not supposed to launch the app this way. How shall I launch it with logging enabled and where they will be located?

I followed the instructions in the README, the only difference is the QT installation, I have used a different compiler because QT 5.9 installation didn't have gcc_64 folder.

This was the content of 5.9 folder

MacBook-Air:~ massimo$ ls Qt/5.9/
.DS_Store      android_armv7/ clang_64/      ios/ 

the environment variable were set as below

Qt5_DIR="~/Qt/5.9/clang_64/lib/cmake"

export PATH="~/Qt/5.9/clang_64/bin/:$PATH"

Any help is appreciated

regards

Massimo

Please re-consider the "Do Not Disturb" feature! There are MANY instances where one would wish to have calls sent to VM. There are many other status modes that will allow calls to ring through. Please allow at least one mode to send calls to Voice Mail.

when trying to open the menu window, the window opens in random places. here is the warning I get
Gdk-Message: Window 0x18b24d0 is a temporary window without parent, application will not be able to position it on screen.

using
Desktop 4.0-165-gde2fcd99 - Qt5.9.1