eclipse-sumo / sumo Goto Github PK

{
    "status": "closed", 
    "changetime": "2009-04-14T11:38:16Z", 
    "description": " * remove dead code\n * remove/add blank lines for better readability\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "duplicate", 
    "_ts": "1239709096000000", 
    "component": "other (also unclassified)", 
    "summary": "cleaning code", 
    "priority": "minor", 
    "keywords": "", 
    "time": "2009-02-11T20:42:51Z", 
    "milestone": "", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-03-05T10:57:42Z", 
    "description": "There are two circumstances under which it should be checked whether nodes shall be controlled by a spanning tls. In the first case (Koeln-Umlegungsnetz), the positions of the traffic lights are guessed and one has to consider tls spanning over more than one junction. In the second case (TAPAS), tls are given, but the traffic lights to compute may also be spanning over several junctions.\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1236250662000000", 
    "component": "net building (NETGEN, NETCONVERT)", 
    "summary": "(TAPAS) add possibility to generate joined tls if tls are given", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-03-05T10:37:24Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "task"
}

{
    "status": "closed", 
    "changetime": "2009-02-19T14:02:59Z", 
    "description": "It must be possible to retrieve detector values via TraCI. It must be defined in prior whether these should really be aggregated values - rather not!?", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1235052179000000", 
    "component": "TraCI", 
    "summary": "(iTETRIS TLS) allow to retrieve detector values via TraCI", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-26T12:57:42Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-02-09T20:16:04Z", 
    "description": "", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234210564000000", 
    "component": "simulation data output", 
    "summary": "(iTETRIS emissions) implement vehicle-based emissions output", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-01T12:53:02Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-05-15T08:39:12Z", 
    "description": "The tests which currently run for sumo should also run with the gui", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1242376752000000", 
    "component": "simulation gui (GUISIM)", 
    "summary": "GUI testing", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-09T10:34:08Z", 
    "milestone": "", 
    "owner": "behrisch", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-02-10T13:30:28Z", 
    "description": "", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234272628000000", 
    "component": "TraCI", 
    "summary": "(iTETRIS emissions) allow to retrieve emissions via TraCI", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-05T12:09:21Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-02-13T15:18:11Z", 
    "description": "", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234538291000000", 
    "component": "simulation general (micro)", 
    "summary": "(iTETRIS emissions) include noise computation and according outputs", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-09T20:17:01Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-01-27T15:49:03Z", 
    "description": "If one tries to load a file where the same id of a poi/polygon is used twice, the second instance is simply discarded. Besides not informing the user, this behaviour also produces memory leaks.\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1233071343000000", 
    "component": "tools (OD2TRIPS, POLYCONVERT)", 
    "summary": "polyconvert does not report about double ids", 
    "priority": "minor", 
    "keywords": "", 
    "time": "2009-01-27T15:07:16Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-02-17T12:05:56Z", 
    "description": "It seems like the OSM importer would forget geometrical information for certain edges. This yields in very large junctions due to the impossibility to compute the incoming edge's end properly.\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234872356000000", 
    "component": "net building (NETGEN, NETCONVERT)", 
    "summary": "OSM network importer creates large junctions", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-29T07:52:12Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-02-03T12:23:44Z", 
    "description": "After the boundaries fo vehicular emissions are known, the visualization should be changed so that it is meaningful.", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1233663824000000", 
    "component": "simulation gui (GUISIM)", 
    "summary": "patch emission visualisation", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-26T13:01:29Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-02-25T10:08:46Z", 
    "description": "The popup-menus allow to retrieve positional information (current cursor position, the nearest position on a lane). In fact, both are buggy.\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1235556526000000", 
    "component": "simulation gui (GUISIM)", 
    "summary": "debug positional information of popup-menus", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-25T10:07:13Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-11-13T09:19:32Z", 
    "description": "If GUISIM is not closed, the output files are not closed. Seems to be a continuation of http://sourceforge.net/tracker/index.php?func=detail&aid=2468327&group_id=45607&atid=443424\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "invalid", 
    "_ts": "1258103972000000", 
    "component": "simulation gui (GUISIM)", 
    "summary": "output files are not closed when loading a new configuration", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-09T20:20:32Z", 
    "milestone": "0.11.1", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-06-04T18:02:56Z", 
    "description": "-a file1.xml,file2.xml is supposed to work exactly like\n-a=file1.xml,file2.xml, but it does not. The counterexample is tests/sumo/meta/option_list_equal_sign.\n", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1244138576000000", 
    "component": "simulation data input", 
    "summary": "command line options do not work with =", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-10T17:15:21Z", 
    "milestone": "", 
    "owner": "behrisch", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-01-28T15:23:03Z", 
    "description": "The estimated costs for a route should be identical for all vehicles. The counterexample can be found by executing the tools/assign/dua-iterate/simple test and looking at input_trips_10.rou.alt.xml.", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1233156183000000", 
    "component": "routing (DUAROUTER)", 
    "summary": "different route costs in duarouter", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-26T13:37:49Z", 
    "milestone": "0.10.2", 
    "owner": "behrisch", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-01-29T07:47:31Z", 
    "description": "The decals exporter uses the following, false format:\n<decals>\n...\n<decals/>\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1233215251000000", 
    "component": "simulation gui (GUISIM)", 
    "summary": "errornous format while saving decals", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-29T07:40:44Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2010-06-30T07:17:51Z", 
    "description": "od2trips assigns connecting links to vehicles without considering the accessibility.", 
    "reporter": "yunpangwang", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1277882271000000", 
    "component": "tools (OD2TRIPS, POLYCONVERT)", 
    "summary": "fixing/improving od2trips", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-09T07:34:14Z", 
    "milestone": "0.12.1", 
    "owner": "dkrajzew", 
    "type": "task"
}

{
    "status": "closed", 
    "changetime": "2009-02-09T20:55:36Z", 
    "description": "", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234212936000000", 
    "component": "simulation gui (GUISIM)", 
    "summary": "decals are not saved", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-09T20:20:54Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2012-09-14T07:08:15Z", 
    "description": "Traci should be a little more verbose if it does not find a vehicle. Furthermore one should more often throw a TraciException instead of fiddling with return values.", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "wontfix", 
    "_ts": "1347606495000000", 
    "component": "TraCI", 
    "summary": "refactoring traci errors", 
    "priority": "minor", 
    "keywords": "", 
    "time": "2009-03-08T00:23:52Z", 
    "milestone": "1.0.0", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-06-10T13:53:25Z", 
    "description": "The routers do not respect vehicle types. Especially for the concept of vehicle classes which are allowed on certain edges / lanes only this is necessary to be implemented.\n", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1244642005000000", 
    "component": "routing (DUAROUTER)", 
    "summary": "vehicle types in router applications", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-26T13:22:56Z", 
    "milestone": "0.11.0", 
    "owner": "behrisch", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-03-12T13:47:09Z", 
    "description": "The interface between Gunnar's calibration code and the duarouter / simulation has to be created.", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1236865629000000", 
    "component": "routing (DUAROUTER)", 
    "summary": "Incorporating calibration of route choice to detector values", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-23T09:54:55Z", 
    "milestone": "0.10.2", 
    "owner": "behrisch", 
    "type": "task"
}

{
    "status": "closed", 
    "changetime": "2009-02-16T09:35:10Z", 
    "description": "When reading XML definitions, NETCONVERT parses the \"speed\" attribute instead of the \"length\" attribute making the streets as long as the allowed velocity.\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234776910000000", 
    "component": "net building (NETGEN, NETCONVERT)", 
    "summary": "speed instead of length while importing XML", 
    "priority": "critical", 
    "keywords": "", 
    "time": "2009-02-16T09:19:32Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-02-17T12:12:31Z", 
    "description": "When building ramps, the road priorities (none has to wait) are set properly. Nonetheless, for same topologies as resulting from building ramps, the priorities are false as soon as the imported network already contains ramps.\n\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234872751000000", 
    "component": "net building (NETGEN, NETCONVERT)", 
    "summary": "false lane priorities on highways w/o ramps", 
    "priority": "critical", 
    "keywords": "", 
    "time": "2009-02-16T10:55:31Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "task"
}

{
    "status": "closed", 
    "changetime": "2009-03-09T09:27:17Z", 
    "description": "The local edge weights from traci carry a lot of cruft into the MSVehicle (possibly leftovers from the c2c). A simple map from edges to weights should probably suffice.\n", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1236590837000000", 
    "component": "TraCI", 
    "summary": "refactoring traci edge weights", 
    "priority": "minor", 
    "keywords": "", 
    "time": "2009-03-08T00:26:19Z", 
    "milestone": "0.10.2", 
    "owner": "behrisch", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-02-09T20:16:11Z", 
    "description": "", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234210571000000", 
    "component": "simulation general (micro)", 
    "summary": "(iTETRIS emissions) incorporate all vehicular emissions and according vehicle classes", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-26T13:00:13Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-02-09T20:15:53Z", 
    "description": "", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234210553000000", 
    "component": "simulation data output", 
    "summary": "(iTETRIS emissions) close work on mean edge/lane emission output", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-01T12:52:01Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-03-12T13:39:01Z", 
    "description": "TraCI tests are broken for quite a long time. Fix them", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1236865141000000", 
    "component": "TraCI", 
    "summary": "make TraCI tests work again", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-26T07:37:42Z", 
    "milestone": "0.10.2", 
    "owner": "behrisch", 
    "type": "defect"
}

{
    "status": "new", 
    "changetime": "2015-02-19T13:54:41Z", 
    "description": "", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "", 
    "_ts": "1424354081103824", 
    "component": "net building (NETGEN, NETCONVERT)", 
    "summary": "rework node and edge shapes computation", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-11T13:42:51Z", 
    "milestone": "1.0.0", 
    "owner": "dkrajzew", 
    "type": "task"
}

{
    "status": "closed", 
    "changetime": "2009-06-08T13:13:40Z", 
    "description": "All the tests in sumo\\extended\\vaporizer\\on_depart fail due to that.", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "worksforme", 
    "_ts": "1244466820000000", 
    "component": "simulation general (micro)", 
    "summary": "sumo with vaporizers does not finish when empty", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-28T09:59:29Z", 
    "milestone": "", 
    "owner": "behrisch", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-04-09T17:03:19Z", 
    "description": "Currently, attributes for departure and arrival of vehicles can not be set within a call to router; quiet uncomfortable...\n\nrouter should have options which, when set, assign the given values to vehicles. One question: if a vehicle already has an attribute set, shall it be replaced by the one given on command line or shall only the attribute given on command line be inserted if the vehicle had non set in prior?", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1239296599000000", 
    "component": "routing (DUAROUTER)", 
    "summary": "(iTETRIS scenarios) let router assign default depart/arrival attributes", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-03-16T14:28:21Z", 
    "milestone": "0.11.0", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-05-19T21:56:25Z", 
    "description": "implement a more or less trivial mechanism to allow splitted xml files", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1242770185000000", 
    "component": "simulation data input", 
    "summary": "xinclude support", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-03-23T12:34:17Z", 
    "milestone": "0.11.0", 
    "owner": "behrisch", 
    "type": "task"
}

{
    "status": "closed", 
    "changetime": "2009-11-20T13:55:52Z", 
    "description": "iTETRIS Vissim scenarios are at first converted from Vissim to XML, then manually edited and then converted into SUMO networks.\n\nDuring this process, the original link numbering of tls (Nummer der Signalgruppe) gets lost. A script is needed which maps the original link numbers to the current network.\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1258725352000000", 
    "component": "other (also unclassified)", 
    "summary": "(iTETRIS scenarios) build a tls mapping script", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-03-16T11:14:51Z", 
    "milestone": "0.11.1", 
    "owner": "dkrajzew", 
    "type": "task"
}

{
    "status": "closed", 
    "changetime": "2009-02-10T14:53:59Z", 
    "description": "nope, the current building of triggers does not work for GUISIM\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234277639000000", 
    "component": "simulation gui (GUISIM)", 
    "summary": "trigger are not shown after loader changes", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-09T20:46:37Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-09-01T18:49:13Z", 
    "description": "", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "invalid", 
    "_ts": "1251830953000000", 
    "component": "other (also unclassified)", 
    "summary": "fixing examples", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-17T09:47:44Z", 
    "milestone": "", 
    "owner": "dkrajzew", 
    "type": "meta"
}

{
    "status": "closed", 
    "changetime": "2009-02-10T18:34:10Z", 
    "description": "The guisim finishs one step earlier than sumo. For an example, execute runGuisimTests.py and select the basic/routes/simtime_same/b0_e50 test.", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234290850000000", 
    "component": "simulation gui (GUISIM)", 
    "summary": "guisim finishs early", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-09T12:53:58Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-01-30T12:03:28Z", 
    "description": "", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1233317008000000", 
    "component": "simulation general (micro)", 
    "summary": "subsecond simulation shall compile", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-23T09:03:24Z", 
    "milestone": "0.11.0", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2013-05-30T07:18:07Z", 
    "description": " * Should be done for NETGEN and NETCONVERT\n * Should be done for bounding boxes and polygons\n * Error check is needed\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1369898287000000", 
    "component": "net building (NETGEN, NETCONVERT)", 
    "summary": "verify network pruning on a boundary", 
    "priority": "minor", 
    "keywords": "", 
    "time": "2009-03-18T10:32:32Z", 
    "milestone": "1.0.0", 
    "owner": "namdre", 
    "type": "task"
}

{
    "status": "closed", 
    "changetime": "2013-05-28T07:52:21Z", 
    "description": "several things to do\n * set time-to-teleport to INT_MAX per default\n * describe somewhere\n\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "wontfix", 
    "_ts": "1369727541000000", 
    "component": "simulation general (micro)", 
    "summary": "no teleports", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-29T08:59:41Z", 
    "milestone": "1.0.0", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-02-10T14:16:02Z", 
    "description": "In order to let remote controlled (via traci) vehicles stop at bus stops the stops placed by TraCI should be checked against the list of predefined bus stops and i the position matches the bus stop shoudl be used.", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234275362000000", 
    "component": "TraCI", 
    "summary": "match traci stops with bus stops", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-29T09:35:04Z", 
    "milestone": "0.10.2", 
    "owner": "behrisch", 
    "type": "task"
}

{
    "status": "closed", 
    "changetime": "2010-04-03T21:53:22Z", 
    "description": "When internal lanes are enabled and no place behind a junction is available, vehicles jam the junction prohibiting foe flows from passing the junction. The correct behaviour would be to have vehicles wait in front of the junctions until enough place is available on the destination lane.\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "invalid", 
    "_ts": "1270331602000000", 
    "component": "simulation general (micro)", 
    "summary": "vehicles must not jam inner-junction areas", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-03-12T08:57:44Z", 
    "milestone": "0.12.0", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-02-10T14:15:15Z", 
    "description": "At the moment each trigger needs its own definition file. It should be possible to define them as nested elements in one xml file. This would also solve some performance issues.", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1234275315000000", 
    "component": "simulation data input", 
    "summary": "flexible nested definition of triggers", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-02-06T13:25:30Z", 
    "milestone": "0.10.2", 
    "owner": "behrisch", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-02-20T16:13:15Z", 
    "description": "It must be possible to change the phase of a traffic light from outside, using TraCI.\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1235146395000000", 
    "component": "TraCI", 
    "summary": "(iTETRIS TLS) change tls phase via TraCI", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-01-26T12:58:48Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "enhancement"
}

{
    "status": "closed", 
    "changetime": "2009-01-30T12:02:55Z", 
    "description": "After changing (correcting) the right-of-way information for normal inntersections, vehicles highway on-ramps keep waiting for free place, not entering the acceleration lane. (For example in the MD-scenario)\n\n", 
    "reporter": "dkrajzew", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1233316975000000", 
    "component": "net building (NETGEN, NETCONVERT)", 
    "summary": "highway on-ramps have false rights-of-way", 
    "priority": "critical", 
    "keywords": "", 
    "time": "2009-01-29T08:14:05Z", 
    "milestone": "0.10.2", 
    "owner": "dkrajzew", 
    "type": "defect"
}

{
    "status": "closed", 
    "changetime": "2009-03-07T23:57:33Z", 
    "description": "Rerouting is only performed if an edge on the route changed its weight which is only correct in the case of increasing weights.\n", 
    "reporter": "behrisch", 
    "cc": "", 
    "resolution": "fixed", 
    "_ts": "1236470253000000", 
    "component": "TraCI", 
    "summary": "Traci changeroute does not reroute", 
    "priority": "major", 
    "keywords": "", 
    "time": "2009-03-07T12:02:50Z", 
    "milestone": "0.10.2", 
    "owner": "behrisch", 
    "type": "defect"
}