Comments (4)
OK, I think I figured it out, though seems silly so I'm just throwing this out here to confirm...
When I initially cloned the repo for the parent(?) Marlin project, and then installed the ABM and PlatformIO extensions to VSCode, I'm guessing that the extensions set themselves up for the project you have open at the time (I don't recall if I was already in that folder or not). When I moved over to the the Ender3V2S1-Released project (this repo) and attempted to re-use the ABM/PlatformIO extensions, it failed - command not found for platformio
The parent comment I made was based on (and I know this more-so now) when I attempted to copy the custom files into the parent Marlin repo and compile - that failed. Honestly - that's just on me hoping it would work, should not have expected it to
Back to the this repo, only when I removed both extensions entirely and re-added them while having open the Ender project could I get the platformio command to execute and complete.
I was able to compile the firmware based on the original instructions after resetting - this issue can be closed as likely user error.
from ender3v2s1.
I see the post you link to is a year ago. In the meantime, the guys have not sat still and improved the firmware every time. Are you still using an older version of the mriscoc firmware? Also, out of curiosity, just tried to make a bin of an ender3 max neo. With the latest configurator and firmware. Here is the result!
Don't know if I checked everything right, but according to the specs I read in the issue you are using a 4.2.2 board and it is for an ender 3 max neo. Am not an expert, but trying to think along a bit. Just my two cents.😜
from ender3v2s1.
If I understand the process, there are 2 repos I'm supposed to clone from, I've cloned both, and ran the configuration gui from the second, which is where the ender 3 max neo firmware branch is. once that step is completed, I copied the .h files and the platformio.ini over to the first repo on branch Ender3V2S1-Released (which if I'm reading your dir correctly is the same repo/branch) - from there I attempt to use the auto build marlin plugin, which is where it fails.
I'm happy to start from scratch if there's a different build process I should follow? Or if you think I've missed a step, I'll gladly try again if you can help point out the step I missed?
~/marlin/Ender3V2S1 (Ender3V2S1-Released)
$ git status
On branch Ender3V2S1-Released
Your branch is up to date with 'origin/Ender3V2S1-Released'.
Changes not staged for commit:
(use "git add <file>..." to update what will be committed)
(use "git restore <file>..." to discard changes in working directory)
modified: Marlin/Configuration.h
modified: Marlin/Configuration_adv.h
modified: Marlin/Version.h
modified: platformio.ini
Untracked files:
(use "git add <file>..." to include in what will be committed)
configurations/Ender3MaxNeo-422-BLTUBL-MPC/
from ender3v2s1.
This issue has had no activity in the last 60 days. Please add a reply if you want to keep this issue active, otherwise it will be automatically closed within 10 days.
from ender3v2s1.
Related Issues (20)
- [BUG] UBL not compensating while print first layer. HOT 2
- X and Y Endstops are inverted in SKR Mini E3 V3 HOT 2
- No led control menu newest firmware HOT 3
- [BUG] M600 resumes mid air Ender 3V2 HOT 7
- [BUG] Cleaning/prime the nozzle off the table HOT 4
- [BUG] (f4 chip in ender 3 s1 is not flashing onto ender 3 s1 when put into printer) HOT 4
- [BUG] Ender3S1 Reboots and loses setting when SD card is inserted HOT 3
- Firmware Randomly Stops Printing HOT 2
- not able to compile SKR mini3 v3 with BLT UBL AND NP HOT 5
- [BUG] Try to Auto Mesh Bed level with G29 HOT 3
- [BUG] Screen brightness going down somethimes when increasing value HOT 3
- [BUG] Numbers in auto leveling not shown unless bed tramming wizard is run first (TJC) HOT 12
- [Issue] Low bed heater PWM frequency powersupply noise HOT 5
- [BUG] Tramming Wizard won't go to all 4 corners and Autobuild Mesh is not moving correctly HOT 9
- Auto mesh isn't working HOT 2
- Probe stowed during mesh levelling, Z-Axis still goes down HOT 2
- Z Wizard not working properly - Final print setting way too high. HOT 3
- G92 doesn't behave preserve physical limits and physical mesh offsets HOT 2
- [BUG] (Tramming Wizard probing extremes)
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ender3v2s1.