[BUG] Numbers in auto leveling not shown unless bed tramming wizard is run first (TJC) about ender3v2s1 HOT 12 CLOSED

Please confirm that you are compiling your custom version and used the Configurator option for TJC displays

or you can add:

#define TJC_DISPLAY

in configuration.h after:

from ender3v2s1.

So if i tram, the probe is not over the knobs but in the 3 by 3 space where he printed the last time. Bummer!!

If you want to return to a full bed tramming add C29 M C (maximize and center mesh) at the end of the End G-code script.

from ender3v2s1.

Is there a fix for that?

Will be a fix in the next release

from ender3v2s1.

I also have this problem at the moment with my printer and tjc screen. I had a dwin screen. And recently using aml. But yestrrday my rotary encoder got faulty of my dwin screen. So i had no choice to use my spare tjc screen. Because i use aml, every time hé does a mesh. But always without showing the numbers. Also missing the nice pictograms. Too bad that creality produced these bad screens! Its always a surprise what screen you get when you order a spare one. I have 3 printers that run professional firmware. 2 have the dacai screens, and one had the dwin. And now unfortenetly a tjc! I ordered a New one, but the last time i ordered a screen i got the tjc. I hope this time i get the dacai or a dwin. I did not want to open a discusion, but now someone did. I can confirm that hé is not the only one. I hope that in the future some clever programmers can also make the tjc screens function just like the dwin and the dacai screens. I was so content with my ender 3 v2 purple Sprite printer with his nice dwin pink screen and nice pictograms. Now with the tjc screen, i feel a little bummed! But on topic. I too have the problem with the numbers! I know that maintaining this site and keeping this nice firmware up to date is a time consuming job. Hope that the tech guys find a solution for this visual flaw. But what for functionality goes, the first layer is spot on! Aml does its job! Again thanks Miguel and consorts!

Greetz harrie

from ender3v2s1.

I also have this problem at the moment with my printer and tjc screen.

I hope that you had read the Wiki and know that there is a firmware compiled specially for TJC displays.

from ender3v2s1.

Yes i know miguel , i read the wiki. I compiled my version with your configurator. I had it bedleveling with the numbers. But as i told in my story i had problems with my dwin screen. I soldered a new rotary encoder on the print, so i had to flash the printer again to test the dwin screen. But no luck, so i had to switch back to tjc. But maybe i forgot something in the configurator. Is late now, will try again tomorrow. Report how it goes.

Harrie

from ender3v2s1.

Please after boot, reset settings by menu or sending the G-code M502 and check.
Could you please test the precompiled versions for TJC, seems to found a possible bug only evident on custom version.

from ender3v2s1.

Am totally confused now. Have reinstalled the firmware. Used the M502 Code. And did a bedmesh. Numbers in the squares. Started a print with aml. Again numbers in the squares. But if I turn the printer off and on again and start another print job the numbers are gone????? Did not use an original bin from tlc because my printer was not listed. Have a 4.2.7 motherboard with a sprite extruder and use la and aml. Did try the configuration files that were in the tlc folder. But to no avail either. I don't get it, what am I doing wrong? The screen also has the firmware on it for the tlc. It also works, only after a fresh install. And 1 time printing. As soon as I restart the printer the numbers are gone!

Harrie

from ender3v2s1.

Please confirm that you are compiling your custom version and used the Configurator option for TJC displays or you can add:

#define TJC_DISPLAY

in configuration.h after:

Ender3V2S1/Marlin/Configuration.h

Line 3409 in 0e7a9c1

#define DWIN_LCD_PROUI // Pro UI by MRiscoC

Yes I did.

Please after boot, reset settings by menu or sending the G-code M502 and check. Could you please test the precompiled versions for TJC, seems to found a possible bug only evident on custom version.

Unfortunately I can't test this now since I managed to break my mainboard in an unrelated electrical shorting incident. However I remember trying settings reset from the menu and it had no effect on this bug.

from ender3v2s1.

After every restart of the printer you have indeed need to tram the bed to have the numbers visible in the squares with bedleveling. Because i am using aml, everytime i have printed something smal, the pionts are set to 3 by 3. So if i tram, the probe is not over the knobs but in the 3 by 3 space where he printed the last time. Bummer!!

from ender3v2s1.

Wil try that miguel. But what about every time after turning printer off and on again, you have to do a tram to make the numbers visable in bedleveling. Is there a fix for that?

from ender3v2s1.

This issue has had no activity in the last 60 days. Please add a reply if you want to keep this issue active, otherwise it will be automatically closed within 10 days.

from ender3v2s1.