Comments (7)
right now, we have one in the C++ bridge (that you can dl as the ros-indigo-naoqi-rosbridge package) and this Python one should simply be removed. I guess we will not move it: let's simply move the C++ bridge in naoqi_bridge and we'll have everything we need this way.
from nao_robot.
Thanks, I tried but have segfaults, what's wrong with this?
+ /opt/ros/indigo/lib/naoqi_rosbridge/alrosbridge_bin --qi-url 133.11.216.224 133.11.216.64
going to add: /opt/ros/indigo
[W] 3513 qi.path.sdklayout: No Application was created, trying to deduce paths
[I] 3513 qimessaging.session: Session listener created on tcp://0.0.0.0:0
[I] 3513 qimessaging.transportserver: TransportServer will listen on: tcp://172.17.42.1:35074
[I] 3513 qimessaging.transportserver: TransportServer will listen on: tcp://127.0.0.1:35074
[I] 3513 qimessaging.transportserver: TransportServer will listen on: tcp://133.11.216.64:35074
[I] 3513 qimessaging.transportserver: TransportServer will listen on: tcp://192.168.206.1:35074
[I] 3513 qimessaging.transportserver: TransportServer will listen on: tcp://172.16.117.1:35074
[I] 3513 qimessaging.transportserver: TransportServer will listen on: tcp://133.11.216.158:35074
using ip address: 133.11.216.64
found a catkin prefix /opt/ros/indigo/share/naoqi_rosbridge/share/boot_config.json
load boot config from /opt/ros/indigo/share/naoqi_rosbridge/share/boot_config.json
found robot variable juliette
[W] 3516 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3515 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3514 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3516 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3516 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3517 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3517 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3514 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3517 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
no camera information found for camera_source 3 and res: 0
found robot variable juliette
[W] 3516 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3514 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
found a catkin URDF /opt/ros/indigo/share/naoqi_rosbridge/share/urdf/pepper_robot.urdf
[W] 3515 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3514 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3514 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
found robot variable juliette
[W] 3517 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3515 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3516 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3517 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3516 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3516 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3515 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
[W] 3517 qitype.signal: Exception caught from signal subscriber: Call argument number 0 conversion failure from LogMessage to LogMessage. Function signature: (LogMessage).
Audio Extractor: Start
registered subscriber: teleop
registered subscriber: moveto
nodehandle reset
from nao_robot.
You may pass a wrong formatted qi-url argument (tcp:// and port :9559 are missing)
Sorry for the inconvenience, I've seen it's not correctly documented. Will fix that asap.
could you please re-run with this command:
/opt/ros/indigo/lib/naoqi_rosbridge/alrosbridge_bin --qi-url=tcp://133.11.216.224:9559 133.11.216.64
from nao_robot.
thanks, finally I can start alrosbridge_bin program and see following topics
BTW, what is the goal of alrosbridge? replace all python ros drivers? if so
should we rename alrosbridge prefix for backward compatibility of pepper_robot package and
fix https://github.com/ros-naoqi/pepper_robot/blob/master/pepper_bringup/launch/pepper.launch t ouse alrosbridge?
$ rostopic list
/alrosbridge/audio
/alrosbridge/camera/depth/camera_info
/alrosbridge/camera/depth/image_raw
/alrosbridge/camera/depth/image_raw/compressed
/alrosbridge/camera/depth/image_raw/compressed/parameter_descriptions
/alrosbridge/camera/depth/image_raw/compressed/parameter_updates
/alrosbridge/camera/front/camera_info
/alrosbridge/camera/front/image_raw
/alrosbridge/camera/front/image_raw/compressed
/alrosbridge/camera/front/image_raw/compressed/parameter_descriptions
/alrosbridge/camera/front/image_raw/compressed/parameter_updates
/alrosbridge/camera/ir/camera_info
/alrosbridge/camera/ir/image_raw
/alrosbridge/camera/ir/image_raw/compressed
/alrosbridge/camera/ir/image_raw/compressed/parameter_descriptions
/alrosbridge/camera/ir/image_raw/compressed/parameter_updates
/alrosbridge/imu_base
/alrosbridge/imu_torso
/alrosbridge/info
/alrosbridge/laser
/alrosbridge/sonar/back
/alrosbridge/sonar/front
/cmd_vel
/diagnostics_agg
/joint_states
/move_base_simple/goal
/rosout
/rosout_agg
/tf
from nao_robot.
I guess all that is obsolete now that the naoqi_driver is much more stable.
from nao_robot.
@k-okada did you fix the exception message ? I get the same message when launching naoqi_driver ...
from nao_robot.
Bump. The same with NaoQI 2.5.3 on the robot and ros-kinetic-naoqi-driver (0.5.9-0xenial-20170315-0 amd64)
from nao_robot.
Related Issues (20)
- ros-indigo-nao-apps package: python nodes do not have the executable bit set HOT 3
- robot model in naoV50_generated_urdf HOT 1
- r_wrist frame typo HOT 6
- nao_speech hangs during startup if it is started with a different node name
- failed to run nao_behaviors (nao_driver/nao_behaviors.py)
- nao_bringup fails to launch naoqi_pose in kinetic HOT 4
- nao_apps speech problem HOT 2
- Issues with naoqi driver and bridge HOT 1
- Question about finger mimic joints in URDF
- Release into melodic?
- Lots of warnings
- Nao v6
- Loading Nao URDF with SDFormat
- voice talk
- NAO V6 URDF HOT 1
- how to add base_foorprint into NAO?
- nao's own camera turn bright and nearly white HOT 1
- NAO isn´t working for ROS2
- Fingers keep spinning HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from nao_robot.